Used Chisel Sharpening Machine for sale (64,875)

Condition: used, Max. saw blade diameter: 800mm, feed speeds: 3, max. feed 80teeth/min, motors: 2. With dressing device and coolant system. All motor cables and switch connectors were replaced. The machine was completely dismantled, cleaned and workshop-overhauled. Documentation available. Inspection possible by appointment. Iodpfx Amoz A Ekbj Doih

Condition: used, Chain chisel machine, chiseling machine Iijdpfx Amoqv A U Ij Dsh

Condition: used, Tool sharpening machine with coolant pump. Once the correct grinding angle has been set, the tool is ground using a manual/linear feed. Technical data: Ijdpfx Amjzrx Iho Dsih - Tool shank: 35 mm - Clamping length: 65 mm

Condition: excellent (used), HSS saw grinder LOROCH model Ekostar 760 year 2008 Iiodpow Hrvqefx Am Djh

Condition: good (used), Iseli SBW Sharpening Machine Iiedozhi Ttjpfx Am Dsh

Condition: used, Automatic sharpening machine Vollmer, model CHC 21 H; minimum and maximum width of bandsaws: 65–200 mm, tooth pitch: 12–80 mm, minimum tooth height: 5 mm, set per side from 0.3 to 1.5 mm, power: 0.55 kW, estimated machine weight: 550 kg, year: 1981, serial no. 364 Iijdpfx Asy Swluem Deh

Condition: used, Year of construction: 2008, grinding diameter 160 mm dist. between centers 645 mm centre height 320 mm control SIN 840D Iiodpoxxbzdsfx Am Djh turning speeds 27.000 U/min x-axis 550 mm y-axis 235 mm z-axis 300 mm A - axis 360 ° C-axis 270 ° total power requirement 20 kW

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 272 mm, turning length: 1,250 mm, turning diameter: 470 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 1,250 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 2,500 rpm, total height: 1,850 mm, total length: 2,700 mm, total width: 1,350 mm, type of input current: three-phase, overall weight: 2,300 kg, XYZ Proturn CNC/Manual Lathe Model: Proturn 410 Control: Proto Trak LX2 Swing Over Bed: 470mm Swing In Gap: 730mm Swing Over Cros Slide: 272mm Distance Between Centres: 1250mm Spindle Speeds: 50-2500 RPM Spindle Bore: 80mm Machine With: Iiodezux Iyjpfx Am Doh 300mm 3 Jaw Chuck Quick Change Toolpost with Holders Dimensions: 2700 x 1350 x 1850mm high Weight: 2300 Kgs

Condition: used, Technical details: grinding wheel diameter: 240 mm Iisdeu Ng Edspfx Am Dsh saw blade diameter: 600 mm total power requirement: 1,1 + (0,37 kW) kW weight of the machine approx.: 600 kg Saw Blade Sharpening Machine Machine performs grinding process automatically saw blade continue to move automatically grinding wheel diameter: max.: 240 mm driving motor for feed (0,37 KW) *

Condition: used, Year of construction: 1974, Technical details: total power requirement: 1,65 kW weight of the machine approx.: 620 kg Iisdpewqplksfx Am Dsh Saw Blade Sharpening Machine Machine not complete - grinding spindle motor missing! for sale as spare part dispenser! *

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Automatic sharpening machine for gang saws with wet grinding. Grinding wheel diameter: 250 mm. Tooth pitch: 25 mm. Arc tooth profile. Fully automatic sharpening operation. Wet grinding unit with pump and tank. Includes several new spare parts. Ready for demonstration. Isdjyt I Hqopfx Am Deih

Condition: excellent (used), Working range 850 mm Iiodpfx Amor Ha Ufs Deh 0.12 kW motor Very good condition.

Condition: good (used), Year of construction: 1993, Vollmer CABG Iodpfszhi Svjx Am Doih Gear grinding machine

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Iisdsxftqdopfx Am Doh Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg Iedpfoydvzdex Am Deih can be demonstrated if required

Condition: not inspected (used), Year of construction: 2000, Brand: Walter Model: Woodtronic CNC 5D Year of manufacture: 2000 Carbide saw blade sharpening machine Condition: will be fully refurbished Used 7-axis CNC for face and back grinding - Diameter: 80 to 850 mm - Cross indexing table - SIEMENS MMC103 CNC control Ijdpfxeyuutys Am Doih - All tooth geometries supported - Numerous options Pictures for reference only.

Condition: excellent (used), Year of construction: 1997, Vollmer CAL 300 Iiedpfx Aey Ryg Ejm Doh

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 176308, Country of manufacture: Switzerland Voltage: 400 / 380 / 50 / 3 Net weight: approx. 350 kg Dimensions: 82x85x156 cm Installed power: max 2 kVA Customs classification: 8460.3930 TECHNICAL SPECIFICATIONS GRINDING WHEEL SPINDLE UNIT Spindle speed (both rotation directions): 2,500 / 3,500 / 5,000 / 7,100 rpm Grinding wheel motor power (2,800 rpm): 0.4 HP Vertical slide stroke (linear): 100 mm Micrometric stop adjustment travel: 25 mm Micrometric stop readout accuracy: 0.01 mm WORKPIECE SPINDLE UNIT Workpiece spindle speed (both directions, continuous): 100–900 rpm Motor power: 0.2 HP Indexing plate teeth count: 120 Angular vernier reading: 20' Collet type: W-20 Horizontal travel: 100 mm Rapid feed per handwheel turn: 2 mm Micrometric feed per handwheel turn: 0.1 mm Micrometric feed per scale division: 0.001 mm SPINDLE HEAD SWIVEL RANGE (a) Main direction: 165° Fixed ratchet increments: every 3° Increments with micrometric screw: every 2' (b) Grinding plane: approx. 15° Stop: at 0° Cross movement range: 80 mm Micrometer travel: 25 mm Iiodpfx Amow T S Sqe Doh Reading precision: 0.01 mm Extraction motor power (2,800 rpm): 0.25 HP All technical specifications provided without guarantee and subject to possible errors or omissions.

Condition: excellent (used), Machine for grinding down the teeth of HSS and friction circular saw blades Isdpfx Amewyc Nhe Deih

Condition: good (used), Vollmer CA 300 complete with support stands Iodpfsfbgvbex Am Dsih

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. Iiodpszi Awhofx Am Djh For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, TECHNICAL DETAILS - Axes : 5 - Max. tool diameter : 150 [mm] - Max. tool length with manual loading : 300 [mm] - Max. tool length with auto loading : 140 [mm] - Max. tool weight : 25 [kg] WORKHEAD (A-AXIS) - Attachment : ISO 50 - Strokes X/Z : 360 / 300 [mm] - Stroke : 360 [°] - Max. speed : 800 [r/min] WHEELHEAD (B-AXIS) - Attachment : HSK-E40 - Stroke Y : 200 [mm] - Stroke : -30 / +180 [°] - Max. wheel diameter : 125 [mm] - Max. speed : 20.000 [r/min] - Power : 7 [kW] WHEEL MAGAZINE - Number of positions : 4 TOOL MAGAZINE - Type : using the linear axes, with Schunk collet - Tool length : 40 – 140 [mm] - Tools Ø4-6 per pallet : 200 - Tools Ø6-10 per pallet : 96 - Tools Ø6-16 per pallet : 54 ELECTRICS - Main voltage : 400 [V] - Total power : 19 [kW] DIMENSIONS - Floor space : 2.200 x 3.350 [mm] - Height : 2.600 [mm] - Weight: 2.500 [kg] EQUIPMENT - CNC : NUM AXIUM Power P2 - Software : Easygrind 6.08 - Linear scales upon X/Y/Z : HEIDENHAIN - Spindle cooling unit - Coolant tank with pump : 10 [bars] Iijdpsuhbzuefx Am Deh * with retractable nozzle - Mist suction unit : ELBARON RON/A 100 DV - Airblow upon tool - Fire estinguisher (to be checked buy the buyer through a specialist) - Number of wheel supports : 12 - Number of pallets : 4 - 1 collet chuck ISO50 with auto clamping - 1 collet chuck ISO50 with manual clamping, capacity Ø : 32 [mm] - 1 collet chuck ISO50 with manual clamping, capacity Ø : 20 [mm] - 1 MASTER calibration device for self-calibration of axes and probe

Condition: used, Year of construction: 2000, operating hours: 38,547 h, functionality: fully functional, machine/vehicle number: 1, grinding wheel diameter: 125 mm, total width: 950 mm, total length: 1,250 mm, total height: 1,870 mm, type of input current: three-phase, input current: 4 A, year of last overhaul: 2018, input frequency: 50 Hz, grinding height: 24 mm, grinding spindle motor power: 2,400 W, input voltage: 400 V, overall weight: 950 kg, grinding spindle speed: 3,972 rpm, spindle speed (max.): 3,972 rpm, The machine is equipped with a second pusher that allows for adjustable single-pass sharpening of the cutter and includes automatic coolant mist extraction. Iedpfx Amezwhuhe Doih It has always been operated with cooled oil and cleaned with a COMAT machine. Operating speed [mm/s] 0.5–20 mm/s Saw blade diameter [mm] 80–500 mm

Condition: excellent (used), Carbide saw double side grinder VOLLMER model Fini-Duo Iiedsv Ef Tbepfx Am Dsh

Condition: used, Knife sharpening machine Technical data: Max. length of knives to be sharpened: 300 mm Diameter of grinding wheel: 125 mm Automatic feed Power supply: 380 V Overall dimensions: Length: 760 mm Width: 560 mm Iiedozhukkjpfx Am Deh Height: 800 mm