Used Changer for sale (2,893)

Year of construction: 2025, condition: new, functionality: fully functional, pallet changer: semi-automatic, Samzon Pallet-Changer is a stationary machine for exchanging pallets without manual handling of the pallets. The pallet is fed into the machine using a pallet truck or pallet jack. The machine rotates back 120-degrees with the product and the bottom plate is lowered back down to the ground with the existing pallet to be exchanged with the new pallet. The bottom plate then lifts the new pallet back up under the product and the product is lowered back down, standing on top of the new pallet. The pallet Changer can be delivered with a variety of extra equipment and surface treatments. Pgsdpfjw Udqhex Adijw Surface treatment is powder coated but can also be delivered in galvanized treatment.

Condition: not inspected (used), functionality: unexamined, Used screen changer with 11-hole strand nozzle untested As-is Pedpfx Adew Nf Rxjisgw

Condition: like new (used), Year of construction: 2021, TOPPY V-SHAPE pallet changer Max. capacity: approx. 25 pallets/h Pallet size up to 120 x 100 cm Max. loading height: 60 - 200 cm incl. pallet Pgsdpfx Adsxxancsijw Max. load: 1,200 kg Tipping angle: 120° Control: PLC S7 Siemens 1200 Manufacturer: Other Year of manufacture: 2021 Space requirement: 210 x 450 x 320 cm

Condition: good (used), Year of construction: 2018, operating hours: 3,869 h, load capacity: 1,400 kg, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, construction height: 2,000 mm, Options: VERY unique WIDE TRACK version equipped with PALLET exchanger!! = Spreader / Rotator / Clamp (Range from 560 to 1700 mm) – Proportional lift & lower valves – Width between support legs 1280 MM!! Pedpfx Ajxrquajdisgw

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, Cincinnati PAK 600 Extruder Specifications The Cincinnati PAK 600 is a single-screw extruder designed for high-throughput plastic processing applications. • Drive System: Requires two electrical drops—one for the control cabinet and another for the drive cabinet. • Electrical Load: Maximum amp load depends on the standard AC motor & drive, as well as the number of barrel and die zones. Electrical engineering will determine the exact amp load based on specific configurations. • Operational Rating: Rated at a service factor (SF) of 1.0 at 1750/100 rpm. Pgodpfx Adswm Ngyeisw

Year of construction: 2025, condition: new, NEW MACHINES Psdpfxohmfcte Adijgw We have a large selection of new pallet inverters and pallet changers, both mobile and stationary models. We have machines for all types of products that need to be turned or replaced pallets. Semi-automatic or fully automatic. We deliver and install throughout the EU.

Year of construction: 2013, operating hours: 100 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 234810, Pallet Changer Mobile sidepress Pgsdpew Udiwsfx Adiew

Condition: ready for operation (used), Year of construction: 2012, operating hours: 21,109 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 80, TECHNICAL DETAILS Travel X-axis travel: 550 mm Y-axis travel: 1,000 mm Z-axis travel: 500 mm Axes A-axis: +300° / -120° C-axis: 360° C-axis resolution: 0.0001° Clamping Table Table dimension: Ø 500 mm Table dimension with zero-point system: 356 mm x 356 mm Max. table load: 350 kg T-slots: 18H8 x 4 Workpiece size: 650 x 500 mm Spindle Spindle speed range: 50 – 20,000 rpm Spindle power: 18.5 kW (S6) Spindle torque: 95 Nm (S6) Tool holder: HSK63 Control Control manufacturer: Fanuc Automatic Tool Changer Tool holder: HSK63 Number of tool positions: 80 Indunorm Pallet Changer Pallet size 1 for automation: 6 pcs 398 mm x 398 mm Preset pallet for Erowa IST: 1 pc 398 mm x 398 mm Pallet size 2 for automation: 15 pcs Erowa ITS115 mm Pallet size 3 for automation: 32 pcs Erowa ITS50 mm Transfer weight incl. pallet: 300 kg Rapid Traverse Rapid traverse X-axis: 48 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Rapid traverse A/C-axis: 18,000°/min (equivalent to 50 rpm) Feed Rate Feed X-axis: 32 m/min Feed Y-axis: 40 m/min Feed Z-axis: 40 m/min Feed A/C-axis: 12,000°/min (equals 33.3 rpm at max. 500 kg) Feed A/C-axis: 18,000°/min (equals 50 rpm) MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,550 x 3,200 x 2,900 mm Machine weight: 16,000 kg Operating Hours (as of 30.04.2025) Power-on hours: 41,624 h Operating hours: 21,877 h Machining hours: 16,829 h Spindle hours: 21,109 h EQUIPMENT - Chip conveyor - Paper band filter - Bed flushing - Electronic handwheel - 6 Parotec pallets 398 mm x 398 mm - 1 Pre-pallet Parotec for Erowa ITS 398 mm x 398 mm Pjdpfx Ajw Stpusdiegw - Extensive Fanuc control options - Machine documentation - Marposs infrared probe - Preparation for oil mist extraction - Blum laser tool measurement - Work area flushing - Hand rinsing gun - External coolant with 3 nozzles, 7 bar - Internal coolant 15 bar - Coolant temperature control - Internal & external air supply

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 1,700 h, functionality: fully functional, machine/vehicle number: MP7/5/P, travel distance X-axis: 730 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, feed length X-axis: 585 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, spindle speed (min.): 1 rpm, spindle speed (max.): 42,000 rpm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 80 m/min, type of input current: three-phase, table load: 60 kg, workpiece weight (max.): 60 kg, overall weight: 8,000 kg, MP7-5 Axis with integrated pallet changer 5-axis with rotary/swivel axis Travel range X/Y/Z 585x250x400 mm Travel range B +/- 105 degrees Travel range C continuous Workpiece weight 60 kg Distance machine table to spindle nose 450 mm Machine dimensions (W x D x H) 2845 x 2370 x 3000 mm Machine weight 8000 kg Spindle speed 42,000 rpm Equipment: Control: Heidenhain TNC640 Main spindle: HVC140 HSK-E40 with rotary union for internal media supply - Max. speed 42,000 rpm - Milling power S1/S6 10 kW / 13 kW - For internal coolant supply, air and emulsion Oil mist extraction for oil/emulsion Dust extraction: L-CUT Machine-integrated workpiece changer for 36x EROWA ITS50 or 18x EROWA ITS115 Hand-held control unit with electronic handwheel and enabling switch Measuring probe system: Renishaw OMP400 Aerosol DRY LUBRICATION (ADL) - Precise dosage of media externally and through the tool Rotary table chuck: EROWA PowerChuck P on 5-axis Blum laser: LC50 Media distributor: MHT Tool changer 90 positions, HSK E40 Warranty: 12 months Transport Pgodoxlctbjpfx Adijw Initial commissioning on site Training

Condition: ready for operation (used), Year of construction: 2010, Hänel Stationary Pneumatic Pallet Changer / Pallet Turner Maximum pallet size: 1250mm x 850mm x 2030mm (L x W x H) Press closed: 76.5mm (width) Press opened: 85.5mm (width) Machine dimensions: 1550mm x 2120mm x 2150mm (D x W x H) Fully pneumatic operation. Year of manufacture: 2010 You are welcome to arrange a viewing. Podpfexly Ivex Adiogw We can organize cost-effective shipping for you! You will receive a proper invoice. For customers from abroad, a net invoice can also be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop to see our other offers as well. The specified company names and trademarks are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: good (used), Year of construction: 1994, 105 mm screw, l/d: 40 Pgodpev S Hr Ejfx Adijw Made for PE granulation Year 1994 With active degassing unit Including BD-Plast screen changer Water ring granulation

Condition: new, Year of construction: 2025, Experience Palletisers & Toppy's fully automatic pallet changer systems, tailored to seamlessly integrate into your production lines, high-bay warehouses, and specific applications. Palletiser & Toppy work closely with system integrators to create customized pallet changer solutions that address your company’s unique requirements. Pgodpfx Adexd Eyheisw Toppy "Four Press" is one of the safest solutions in our range. It is specially designed for fragile and unstable loads and features four walls (two front and two side) along with optional 'special mats' to secure products during pallet exchange and eliminate any risk of falling. The entire pallet change process is fully automated, ensuring efficiency and safety in your operations. Our in-house R&D team specializes in designing and adapting fully automatic pallet changer systems that fit your workflow, range of products, and specific needs. Whether you operate in logistics, manufacturing, or another industry, Toppy’s solutions provide the ultimate in safety, efficiency, and system integration. A fast and simple method to switch between wooden and plastic pallets, or vice versa.

Condition: used, Horizontal machining center with pallet changer STEINEL type BZ 24 FFZ with CNC control SIEMENS Sinumerik 850 M serial no. 77 year of construction 1990 Travel X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm infinitely variable Pjdpfx Adjdzqmrjiogw Tool holder ISO 40 Mains connection 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double arm gripper - Pallet changer with 4 pallets - Horizontal pallet position for machining, axis movement = X-axis - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with transverse movement as Y-axis - KSS spray nozzles on the spindle ram and in the work area - Coolant device with chip conveyor under the work area - CNC control SIEMENS Sinumerik 850 M - Interface for data transfer Space requirement L x W x H 9000 x 3100 x 3200 mm Weight 13.5 tons Transport dimensions on truck: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm Container loading into a 40" OT HC is possible. good condition

Condition: like new (used), functionality: fully functional, Nordson Hydraulic Screen Changer / Start-Up Valve Podpfjwb Dc Sjx Adiegw For sale is a like-new Nordson / Kreyenborg hydraulic single-piston screen changer. The unit is ideal for extrusion lines and can be used as both a conventional screen changer and a start-up valve. Technical Specifications: • Screen area: 27 mm (see photos) • Design: hydraulic, with hydraulic cylinder Optional: Hydraulic station Condition: • The unit has been tested and is fully functional. • Ideal as a cost-effective solution for start-up or cleaning processes.

Condition: good (used), Tool changer for lathe, tool disc turret, turret system, disc turret for lathe -Manufacturer: Swedturn, Type ST12 CNC 300 tool changer -Tool turret: for max. 12 tools -Tool holder: Ø 60 mm -Individual components: see photos -Dimensions: 565/470/H565 mm -Weight: 319 kg Pjdpfxowvh D Ao Adiogw

Condition: new, Year of construction: 2025, functionality: fully functional, LTS - Semi or fully automatic pallet changer system. Pgodpfx Aoxd Erqsdijw A quick and simple way to switch from wooden to plastic pallets, or vice versa.

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Pedpoutuyiefx Adiogw Weight approx. 8 tons good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg

Condition: good (used), Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Mikron, tool changer from CNC machining center Mikron UME 600 -for: max. 22 shots Pedpfx Ajrb E E Njdijgw -Intake: SK40 -Dimensions: 1200/1150/H860 mm -Transport weight: 294 kg

Condition: used, Machine not operational, control system does not start Horizontal Machining Center with Pallet Changer STEINEL Type BZ 24 FFZ with CNC Control SIEMENS Sinumerik 850 M Serial No. 58 Year of manufacture 1990 Travels X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm, infinitely variable Tool holder ISO 40 Power supply 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double-arm gripper - Pallet changer with 4 pallets - Horizontally positioned pallet station for machining, axis movement = X-axis Pjdedzqmfjpfx Adijgw - Pallet rotation = B-axis - Ram spindle as Z-axis - Ram spindle with cross movement as Y-axis - Coolant spray nozzles on the ram spindle and in the work area - Coolant system with chip conveyor beneath the work area - CNC Control SIEMENS Sinumerik 850 M with TFT monitor - Interface for data transfer Space requirement (L x W x H) 9000 x 3100 x 3200 mm Weight 13.5 tons Machine not operational, control system does not start – otherwise in good condition Transport dimensions: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm

Condition: used, Tool changer chain, chain magazine, tool changing system, tool magazine -The tool changer comes from CNC machining center make: Hitachi Seiki type: HC400 -Tool changer for: Hitachi Seiki type HC400, other spare parts available. -complete with: gripper arm and drive Pgjdpedtcrqsfx Adiow -Tool changing positions: 80 -Intake: SK40 -Dimensions: 2270/630/H1725 mm -Town weight: 860 kg

Condition: used, Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: MAHO, Tool changer from CNC machining center MAHO MH 800C -for: max. 24 shots -Recording: SK -Dimensions: 1200/410/H480 mm -Town weight: 106 kg Pgsdpfx Adeq Tvp Ujiow

Condition: used, Tire changer -Plate diameter: 475 mm Podpfx Adob A Hwrjiegw -pneumatic tire press -Folding arm -Weight: 208 kg

Condition: used, Tool changer chain, chain magazine, tool changing system, tool magazine -Spare part comes from a BJM machining center type ALBZ-145 -Intake: HSK40 -Tool changing system: CTM42 DO 12P3 400 -CUT changer: CUT42-V-90-60-D VX Pgodsfcr I Ejpfx Adisw -RIG changer: RIG 06-12-P003 VX VCP IN DA -Drive engines: MGM -Dimensions: 730/700/H450 mm -Weight: 160kg

Condition: good (used), tool changer for lathe, tool disc turret, turret system, disc turret for lathe -Manufacturer: Sauter, tool changer type 0.5.675.112 from vertical lathe Scherer VDZ 80 DS -Tool turret: Type 0.5.901.012 for max. 12 tools -Servo motor: Siemens type 1FK7063-2AC74-1SB0 -Individual components: see photos Pgodpfxovyg Euj Adijw -Dimensions: 560/450/H300 mm -Weight: 117 kg

Condition: used, Tool changer chain, chain magazine, tool changing system, tool magazine Pgsdpfx Adjg U A I Hoisw -Manufacturer: Seco, tool changing system tool arm -Drive unit: TP type MRC-S28-1V-210 -Dimensions: 780/420 / H300 mm -Weight: 66 kg