Used Circuit Board for sale (6,617)

Condition: excellent (used), Epson G10-854SR Robot Assembly Station, Dispensing Station The assembly station is divided into the sub-stations 3.1 Dispensing Area, 3.2 Assembly Area Cooler + End Plate, and 3.3 Front Assembly Area. (Cooler = Heat Sink, End Plate = End Plate Angle) St. 3.1: Dispensing Area - A WT (Work Tray) with attached chassis and circuit boards enters the dispensing area via the transfer belt. - It is stopped at the lifting and positioning unit (HuPo), lifted from the belt, and fixed in place. - The x-y-z handling system then moves the dispensing head to the designated position and starts the dispensing process. - After successful dispensing, the handling system moves over the rest position, and the WT is placed back onto the belt. - Further transport to the assembly area Cooler + End Plate (condition: no WT in the assembly position). St. 3.2: Assembly Area Cooler + End Plate - A WT from the dispensing area enters the assembly area Cooler + End Plate via the transfer belt. - It is stopped at the lifting and positioning unit (HuPo), lifted from the belt, and fixed in place, while the side walls of the chassis of the partially assembled unit are aligned. - Simultaneously, the cooler tray and end plate tray are positioned. - A stack of cooler trays (12) and a stack of end plate trays (12) are manually placed on the respective infeed belt outside the protective enclosure. - The two safety gates are opened, and the loaded tray stacks move into the gripping position of the respective stacker. - The two safety gates are closed again. - The respective grippers grasp the corresponding tray. - The z-axis separates the trays and transports them upwards (above the actual picking height). - A centering support is pushed and positioned under the respective tray using x-axis movement for centering and tray stabilization. - The respective stacker's z-axis places the respective tray on the corresponding centering support. - The trays are ready for component removal. - The multi-gripper on the SCARA robot grips the cooler in the tray and places it in an intermediate position as an alignment aid (to compensate for inaccuracies when picking from the fixed gripping position for assembly). - The cooler is scanned, gripped again, and, if the scanner result is positive, mounted on the WT. Hodpfxsibx S Ns Ac Isnt - The non-conforming cooler is placed in a non-conforming box. - The multi-gripper on the SCARA robot then grips the end plate in the tray and places it in the alignment position. - The end plate is gripped again and mounted on the WT. - Continues with the front assembly area. Technical Data Design: SCARA (4-axis robot) Load capacity: nominal 5 kg, max. 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Orientation reach: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Orientation repeatability: J4: +/- 0.005° Max. operating range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Max. operating speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400 °/s Permissible moment of inertia: nominal 0.02 kg*m², max. 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Pressing force: 250 N Weight: 48 kg Controller: EPSON RC180 Type of mounting: Ceiling IP protection class: IP20 Power and signal cable: 3m Financing through our bank is also possible. komplett-konzept.leasingo.de

Condition: ready for operation (used), Year of construction: 2010, Brand: DIXI Model: 60 SD Year of manufacture: 2010 Pressing force: 60 tons Voltage: 400 Max. bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Dimensions of filling opening: 115 cm wide x 80 cm deep x 55 cm high Hnodjz Az Eljpfx Ac Ist The DIXI 60 SD features simple operation, an automatic start function, and automatic bale ejection. Thanks to its compact, low-profile design, this machine is ideal for spaces with limited headroom. Video available upon request!

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,390 mm, total width: 2,615 mm, wire diameter (max.): 0.3 mm, table width: 710 mm, overall weight: 5,200 kg, table length: 1,050 mm, table load: 1,000 kg, controller manufacturer: SODICK, controller model: LP20WH, product length (max.): 2,740 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Sodick AG 600 L wire EDM machine was manufactured in 2011. It features a maximum workpiece size of 800 × 570 × 340 mm and a robust table size of 1,050 × 710 mm. With a wire feed speed of 20 mm/s and a dielectric tank capacity of 800 L, this machine is designed for precision and efficiency. If you are looking to get high-quality wire EDM capabilities, consider the Sodick AG 600 L machine we have for sale. Contact us for further details. • Type of drive: Linear motor drives • Power consumption: 10.5 kVA (max. 13 kVA) • Maximum workpiece size: 800 × 570 × 340 mm • Taper angle: ±25° (at 100 mm workpiece thickness) • Wire tension: 3–23 N Hnedpfszi Ayvsx Ac Ist • Wire feed speed: 20 mm/s • Dielectric tank weight (empty): 600 kg • Filtration system: Replaceable filter (3 internal pressure filters) • Deionizer: Ion exchange resin (18 L container) • Required floor space: 3,700 × 3,900 mm • 60 A generator • Super Pika 0.1 Ra finishing circuit board • Automatic wire threader/cutter • Wire feeder unit for spools up to 50 kg

Condition: ready for operation (used), functionality: fully functional, power: 198.58 kW (269.99 HP), fuel type: diesel, empty load weight: 42,000 kg, Year of construction: 1987, operating hours: 13,800 h, machine/vehicle number: 16300999, Machine in working condition. Simple design with no electronic circuit boards (increased safety). Rock bucket: 850 mm. Earth bucket: 1750 litres. Total width: 3.30 m. Weight: 42 tonnes. Arm: 2.6 m. Functional, no repairs required. No oil leaks or smoke. Contact by phone in French, or by email in your language. Hnedpfx Aoxb Dhrec Iot

Condition: ready for operation (used), Rexroth RF03 12 305054 circuit board for rotary encoder with accessories, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hnodpfezzhlzox Ac Ist

Condition: ready for operation (used), Fanuc A20B A350-0008-T372/ circuit board, used, in good condition, 100% functional, delivery as per photos Hnsdpfxsy Np Trs Ac Ijt

Condition: used, GRUNDIG Circuit Board Hnsdpfxey Tbw Do Ac Iet NSV 56 44206-734.00

Condition: used, Painting line Manufacturer: Giardina, Rich Fruit, Neomec, Kremlin The painting system is designed for painting elements made of MDF or HDF boards. The spray booths have two circuits, one for clear coats and one for colored paints. The system is designed for water-based UV coatings. The system consists of the following elements: Infeed Manufacturer: Neomec Conveyor table with a cleaner Spray painting machine Manufacturer: Giardina Type: Dualtech 416 Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Turntable Hnjdpozuzg Sofx Ac Iet Conveyor table Conveyor table with a cleaner Spray painting machine Manufacturer: Rich Fruit Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Each booth has two circuits, one for paint and one for coatings, driven by KREMLIN pumps and spray guns from the same company. Length of the machine line: 92 m Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, mileage: 284,839 km, power: 151 kW (205.30 HP), first registration: 03/2007, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro4, number of seats: 3, loading space length: 4,200 mm, loading space width: 2,490 mm, loading space height: 600 mm, Equipment: ABS, parking heater, soot filter, Equipment: * Flatbed with aluminum sideboards, * Dimensions approx. overall 4,200mm x 2,490mm x 600mm * Dimensions of tarpaulin body approx. 2,030mm x 2,490mm x 1,980mm * Storage box, * Trailer coupling, pintle hitch AHK + ball hitch, 3.5 t, * Brake connection 2 lines normal + Duo-Matic, * Driver's seat, comfort version, * Passenger seat bench, * Mechanically operated sunroof, * Flame starter system, * Fuel tank: 150 liters Technology: * Audio system: MAN CD 24V radio, * ETA circuit breaker, * On-board computer MAN-Tronic Safety: * Differential lock, rear axle, * Engine brake, * Electronic braking system MAN-Brakematic, * Stabilizer bar, rear axle Other: Hjdpjzlvnlefx Ac Ient * Suspension: leaf spring / leaf spring, * EURO 4 engine, * Engine 4.6 liters - 151 kW Diesel, * Payload 2,990 kg according to ZLB, * Permissible total weight 7.49 t, Since 1972, we have been your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, at the Bremen interchange. Behnke Commercial Vehicle Center always has approximately 200 vehicles from the fields of vans, commercial vehicles, and construction machinery in stock! We offer you attractive financing options at favorable special conditions. If you are interested, we will be happy to prepare an individual offer for you! We are happy to accept your commercial vehicle/construction machine in part exchange. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may need to be verified separately. Errors and prior sale are subject to change.

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software 2D Inspection and Repair option SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Hsdpfszlx E Tjx Ac Iont Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors

Year of construction: 2009, condition: ready for operation (used), Industrial Pill etching machine from a printed circuit board manufacturing facility. Process stages: infeed section, etching chamber, replenisher, 4-stage cascade rinse, drying and outfeed section, max. working width: 650mm, PCB thickness: 0.1mm-3.2mm, conveyor speed: 0.5m/min-5.0m/min, max. process temperature: 55°C. Including a magnetic centrifugal pump for the etching chamber, one tank X/Y: 3500mm/2200mm and one Lantronic stacker. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1300mm. An on-site inspection is possible. Hnsdpfx Asznx Imoc Iot

Condition: used, Year of construction: 2024, Rear section Primera DMC 4200 l 1-fold conveyor section Single-shoot distributor heads / f. 16 rows Long loading board for rear section Drawbar with folding support foot / lower linkage attachment Cat. 3 braked axle with parking brake / dual-circuit air brake system Hsdpfeuhnwvox Ac Iont

Condition: ready for operation (used), Siemens 6DM1001-8WD10 digital synchronizing controller, version: 4, SN: MAJ1503773 + E89110-B2320-L1 circuit board, SN: MAH9506848, used, normal signs of wear, 100% functional, scope of delivery as per photos. Hodpfx Aex Euqnoc Ijnt

Condition: used, mileage: 1,919 km, power: 355 kW (482.67 HP), first registration: 02/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, Equipment: air conditioning, soot filter, DAF XFc 480 FAT 6X4 Meiller Trigenius Three-Sided Tipper * Retarder (ZF Intarder) * Euro 6e * Wheel arrangement 6X4 * Differential lock Hjdpfx Aozbf Twjc Iont * Meiller Trigenius three-sided tipper D316 * 8 pairs of recessed tie-down points on the loading platform * Foldable underrun protection * Bordmatik on the left side * 2-circuit trailer hydraulics * AHK pintle hitch, 50 mm * Refrigerator * Roof hatch * Window in the rear wall * On-board computer * Adaptive cruise control * Lane departure warning system * Emergency brake assist * Turning assist with camera * Air conditioning * Auxiliary heater * Day cab * Automated transmission, TraXon, 12 gears * LED headlights * Wheelbase 4.05 m / rear overhang 1.50 m * DAF Infotainment Luxury Plus, Luxury speakers * FM/DAB/BAB+ radio * Fuel tank 340 l * AdBlue tank 45 l * Rear axle ratio 3.61 * First gearbox auxiliary drive, type NH/4c, mounted on the right side of the gearbox output shaft. Ratio 27/30, direct pump drive * Roof hatch * Luxury driver's seat * Central locking with remote control Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Important note - important information: Despite careful verification of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, mileage: 284,839 km, power: 151 kW (205.30 HP), first registration: 03/2007, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro4, number of seats: 3, loading space length: 4,200 mm, loading space width: 2,490 mm, loading space height: 600 mm, Equipment: ABS, parking heater, soot filter, Equipment: Hedpfszlvnxsx Ac Ient * Platform body with aluminum side walls, * Dimensions overall: 4,200mm x 2,490mm x 600mm * Dimensions of the canvas cover: 2,030mm x 2,490mm x 1,980mm * Storage box, * Tow hitch, pintle hook + ball hitch, 3.5 t, * Brake connection: 2-line standard + Duo-Matic, * Driver's seat, comfort version, * Passenger seat bench, * Manually operated lift roof, * Auxiliary heating system, * Fuel tank: 150 liters, Technology: * Audio system: MAN CD 24V radio, * ETA circuit breaker, * On-board computer MAN-Tronic, Safety: * Differential lock, rear axle, * Engine brake, * Electronic braking system MAN-Brakematic, * Stabilizer bar, rear axle Other: * Suspension: leaf spring / leaf spring, * EURO 4 engine, * Engine 4.6 liters - 151 kW Diesel, * Payload 2,990 kg according to ZLB (vehicle registration certificate), * Permissible total weight 7.49 t, Since 1972, we have been your reliable partner for everything related to cars/commercial vehicles in 28832 Achim, near the Bremen motorway junction. NutzfahrzeugZentrum Behnke always has around 200 vehicles in stock from the areas of vans, commercial vehicles, and construction machinery! We offer you attractive financing options at favorable special conditions. If you are interested, we will be happy to create an individual offer for you! We are happy to accept your commercial vehicle/construction machine in part exchange. If a new TÜV (technical inspection) is required, we will gladly provide you with an offer from our partner workshops. Our offer generally does not include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. The listed equipment may need to be checked separately. Errors and prior sale are reserved.

Condition: ready for operation (used), A comprehensive spare parts package for the Arburg Allrounder 221 series is available. 1) Mechanics/Hydraulics/Plasticizing: 6x ejector piston rod, 3x pressure relief valves, clamping cylinder seal kit, 5x ejector seal kit, injection unit seal kit, cylinder D30, screw D30, 20x disc spring D31,5/16,3. 2) Heating/Temperature: 6x barrel heaters 1750W, 5x nozzle heater band 600W, Thermomat, 40x thermocouples. 3) Electrical/Sensors/Switches: 2x coding switch blocks, 6x contact sensors, 5x rocker switches, 2x snap-action switches, 9x switches, 8x microswitches, 2x limit switches, 10x ejector safety switches, 4x initiators, oil level switch, 6x contact pins with contact, 2x pulse counters. 4) Electronics/Control: printed circuit board ARB 279, 2x each membrane keypad ARB 179 and 180, printed circuit board shutdown automation 141, 2x printed circuit board ARB 550, printed circuit board ARB 554. Only package sale is possible. Documentation available. On-site inspection is possible. Hedpfx Aoycig Dec Isnt

Condition: good (used), CNC control, card slot, control cards, plug-in cards, circuit boards, control rack -Manufacturer: Automata, Control Rack -Type: Rack VME 9 SLDT 7U/R -Printed circuit boards: Tecnint TVM 743 Tecnint TVM 200 CA1-94-V1 -DC/DC Converter: cdi -PowerSupply: Automata VME 150W -Individual components: see photos -Price/Sale: complete Hnodpsw S D D Njfx Ac Iot -Dimensions: 300/280/H310 mm -Weight: 9.9 kg

Condition: refurbished (used), Repair of the tachometer circuit board for various models. Please contact us if the gear stages are no longer functioning correctly as intended. Hedpfx Acsy Rfzuj Iont

Condition: used, Year of construction: 2008, functionality: fully functional, manual in images. This is a 5 head horizontal Band Saw. It has tilting heads making it ideal for Feather Edge board production. It has 18KW motors. This machine comes with its own saw sharpening equipment and 10 new blades. All power feed wheels have been replaced with new. It runs on 30mm blades. All new power feed sprockets and fully DC braked. Hjdpfjzwh Rcex Ac Isnt

Condition: used, mileage: 157,000 km, power: 294 kW (399.73 HP), first registration: 08/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,500 mm, loading space width: 2,450 mm, Equipment: ABS, air conditioning, crane, soot filter, Int. No.: 021 Well-maintained MAN TGS with FASSI F155 crane in original condition * MAN * TGS 26.400 * 6x4 * Leaf spring suspension * Permissible weight 26,000 kg * Payload approx. 12,100 kg * CRANE Fassi F155 * 5th/6th control circuit * 4-point outriggers * Hook height approx. 14m * Lateral reach, see load chart Hnedpoqmb Hiofx Ac Iet * REMOTE CONTROL for crane * Differential lock * Central locking * Platform 6500mm x 2500mm * SIDE BOARDS available at an extra charge * 3-seater * Radio * EURO6 * Green emissions sticker * Good condition * 1st owner * VAT can be shown!!! Trade-ins possible Financing from 4.99% Errors and prior sale excepted! The information in this advertisement is a non-binding description and does not constitute guaranteed features. The seller assumes no liability for typing and data transmission errors. Listed equipment must be checked separately. All information in the advertisements is non-binding! Delivery throughout Germany upon request Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m. Friday from 9:00 a.m. to 2:00 p.m. and by appointment!!!

Condition: used, PDF listing included! Extensive spare parts package – HOMAG / Homatic / Industrial Electronics Hnodpfjzw N Sbsx Ac Iot For sale is a comprehensive collection of industrial and machine spare parts, primarily from the HOMAG / Homatic range, supplemented by components from Josting, Ferrocontrol, Heesemann/Kuhnke, Vero, Lenze, Brandt, Kuper and other manufacturers. The package comprises a total of over 500 individual items, offering an interesting selection of spare parts, modules and electronic components – particularly for the maintenance, repair and spare parts supply of older machines and control systems. Included are, among others: HOMAG / Homatic input and output cards PLC controllers and CPU cards PLC and program memory / EPROMs / flash modules Mini controllers and axis processors Servo and axis processors Frequency inverters / converters Encoder drivers Time and counter cards PC control units Control panels, keyboards and terminals VME bus and interface cards Power supplies and DC/DC converters Adapter and graphics modules various machine spare parts and circuit boards components from the Ferrocontrol / Josting range additional modules for HOMAG, Brandt and Heesemann machines The collection is particularly interesting due to the large number of different modules and the partially multiple availability of spare parts. It also includes many older or currently difficult-to-source components, which may be of interest for the repair and continued operation of the corresponding machines. Some of the included part numbers / modules: HOMAG / Homatic 2-083-01-5403/04 – 16 × 24 V output card 2-083-01-5406 – Homatic 16 × 24 V output card 2-083-01-5407 – 24 V NPN HC020 FET output card 2-083-01-5408 – 16 × 24 V output card 2-083-01-5101 – 16E 24 V input card 2-083-01-5105 – 32 × 24 V input card, PNP 2-083-01-5423 – Input/Output card HC010 2-083-01-5004 – CPU transfer RAM / auxiliary memory 2-083-01-6902 – PC control unit 2-083-02-7006 – Axis processor 6809 2-083-02-7010 – Encoder driver 2-083-02-7420 / 7421 – Conversion processors 2-083-02-8000 – Axis processor for 6 axes 2-083-02-8068 – Servo 4-axis 2-083-03-0046 – CPU30 E16-103 2-083-03-0202 – SECO 6×RS232 VME bus and numerous other Homatic modules and control components. Josting / Ferrocontrol Input-80 0990 0741 – Input cards Output-80T 09900762 – Output cards Ferrocontrol ORE-80 circuit boards E² PRGR 0990 0591 EFR 0990690 other control and electronics modules Heesemann / Kuhnke various input and output cards Delay cards CPU cards Power supplies and other machine components Power supplies / power units Vero Monovolt PK60 Vero Trivolt HOMAG / Homatic 5 V / 12 A or 20 A power supplies Schroff Switchpac-Triple power supplies Condition The parts come from an extensive spare parts stock. The condition and functionality may vary depending on the item. A complete technical inspection of all individual parts has not been carried out. The existing list with 513 items can be provided upon request. Due to the large quantity, the collection is preferably offered as a complete package. If you are seriously interested, further information, photos and the complete item list can be provided.

Condition: new, Radio remote control / joystick transmitter / transmitter / receiver: 1. Radio remote control / joystick transmitter / transmitter Type: DRC - JD2 with 4 batteries (new). 2. Transmitter type: DRC - 10 2ST D3 - 2 units (new). 3. Receiver type: DRC - MP D3 (new). 4. Circuit board type: DRC - DR D3 (new). 5. Electrical enclosure with receiver type: HBC FSE516 6. Receiver type: RC - E10 Hnedpfx Aeyuy S Uoc Ijt 7. Radio remote control / joystick transmitter / transmitter - 2 units: Type: FSS760 - 40 Type: 716 - K 12973 8. Radio remote control / joystick transmitter / transmitter - 2 units: Type: F24 - 60 TK 9. Radio remote control / joystick transmitter / transmitter - 2 units: Type: F25 - 6D

Condition: used, mileage: 243,485 km, power: 287 kW (390.21 HP), first registration: 12/2005, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, color: blue, gearing type: mechanical, emission class: euro3, loading space length: 5,500 mm, loading space width: 2,480 mm, loading space height: 800 mm, Year of construction: 2005, Equipment: ABS, air conditioning, crane, Stock No. 5877 MAN TGA 26.390 with HIAB 288-EP-3 HIDUO front crane with remote control / 6x4 / AP axles / 243,000 km ----* Manufacturer: MAN * Type: TGA 26.390 * Mileage: approx. 243,485 km * First registration: 12/2005 * Gross vehicle weight: 26,000 kg * Unladen weight according to vehicle registration: 14,895 kg * Transmission: mechanical 8-speed split gearbox * Suspension: leaf spring suspension front and rear * Tires: 1st axle 385/65 R 22.5, 2nd + 3rd axle 315/80 R 22.5 approx. 50% tread * Axles: 6x4 / AP axles * Wheelbase: 4.30m * Cab: L cab, low / 2 seats * Color: Blue * Horsepower: 390 hp / Euro 3 / L package * ABS * TÜV (German technical inspection): 03/2027 * Dimensions of flatbed: approx. 5.50m long x 2.48m wide, side boards approx. 0.80m high * HIAB front crane type 288-EP-3 HIDUO, year of manufacture 2009, with remote control * 3 hydraulic extensions * short extension at 4.30m = 6,100 kg * long extension at 10.20m = 2,480 kg * control circuit for swivel servo * load hook * hydraulic supports front * floor control on the left * flatbed floor, screen printing / steel * 4 pairs of large lashing points + 12 pairs of lashing points * 400-liter aluminum diesel tank on the right * sun visor * aluminum side boards Hnjdpfszw Sqyox Ac Ijt * removable stakes * rotating beacons * sun visor * 2 x front toolbox on the left * 1 x front toolbox on the rear right * trailer coupling with 50mm pin * differential lock * engine brake * cruise control * air conditioning * roof hatch * rear cab wall with window * electric windows and mirrors * mirror heating * radio * old tachograph German vehicle!! German papers!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, errors may occasionally occur in the text or information. We assume no liability for errors, changes or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify further questions.

Condition: used, New decorative film (manufactured in 2019) Hnsdezrxnhopfx Ac Ijt Control panel 23 001 0078 Ident No. 10017781 / 912053002 Used original circuit board, cleaned and tested Used original aluminium support plate Cables available on request

Condition: good (used), 9 pieces, each with a circuit board Removed from an Arburg 420 C Selogica 100 EUR per piece Hnedpfx Aezdktgoc Iot 600 EUR for the entire set