Cardboard Cutters

PACKSIZE-EMSIZE TYP M1

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2025, DGUV certified until: 12/2026, overall weight: 25 kg, input frequency: 50 Hz, empty load weight: 25 kg, Mixing Maschine Rego SM 2,3 and 4 Gsdpfx Absdlxgts Uskf

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 Gkodpfxjdt Rgvs Ab Usf VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Lamella - carcass press with rapid traverse Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) Gkedpfx Asiidm Nob Usf - Including option: Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 2025, condition: new, functionality: fully functional, Safe and responsible packaging — just in time. The CORBOX Series cardboard box cutting machine produces resource-friendly packaging solutions for the future of the wood-processing industry. The CORBOX produces made-to-measure cardboard boxes fully automatically and just in time. In a dynamic process, raw materials are used responsibly, thereby saving packaging and filling material in significant amounts. With the CORBOX, produce exactly the packaging that you need — in optimal form, with a high volume-utilization factor and the lowest possible unit costs. Godpfxekthnco Ab Uokf

Condition: new, Year of construction: 2025, functionality: fully functional, cutting length (max.): 5,000 mm, cutting width (max.): 1,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, type of input current: three-phase, Equipment: lighting, motor brake, rotational speed infinitely variable, scorer, You can get all common Altendorf models, including the F25, F35, WA80, and F45, as well as the Hand Guard machine in all variations. Basic Equipment Electrically driven height and tilt adjustment 0-46° with automatic cutting height correction when tilting Controls at eye level, tiltable Double sliding table, table length 3,000 mm Parallel stop, manually adjustable via scale, including manual fine adjustment Cutting width 1,000 mm, larger available upon request. Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm Maximum sawblade projection: 150 mm Maximum sawblade diameter: 450 mm Drive power: 4 kW (5.5 HP) at 4,000 rpm AKE tool clamping system for the main sawblade Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Continuously variable speed control from 2,000 - 6,000 rpm - Precise speed adjustment to the material increases cutting quality and sawblade service life Extended cutting height for one-sided tilting This option is equipped with a large extraction hood for a maximum sawblade diameter of 550 mm and a maximum sawblade projection of 204 mm for one-sided tilting. In combination with a scoring unit, the maximum saw blade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP). 2-axis scoring unit, single-axis tilting With electric height and lateral adjustment, programmable scoring blade height with quick lowering and quick raising, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofitting only possible on machines prepared for a scoring unit. LED lighting With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked. The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in their respective hard-chrome-plated guide rods. This smooth running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-hollow chamber system. The table surface is precisely planed and anodized. A hard-chrome-plated round rod, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. On/Off Switch on the Sliding Table The on/off switch on the sliding table is always within easy reach. The four buttons turn both the main saw blade and the scoring unit on and off. This saves time and ensures greater safety. Angle and miter stop, cutting to lengths up to 3500 mm This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the tilt angle is continuously adjustable by 49° and is displayed on a scale. Gedpfjwf Hdgsx Ab Uokf Ask us about your dream machine and we will be happy to advise you. We are happy to arrange viewings directly at the machine, in the factory, or with wood dust in the air.

Condition: new, Year of construction: 2025, For machining smaller parts, especially solid wood Simple and safe operation Combined sanding unit with sanding shoe for calibrating solid wood Control panel on the front side Standard with ribbed steel roller Ø 120 mm and hard sanding shoe with graphite coating on exchangeable insert Gkedpocnw U Rsfx Ab Uef Motorized height adjustment of the working table Electronically controlled sanding belt oscillation Manual star/delta start of the motor Mechanical measurement of the table position Ammeter for displaying the current consumption of the grinding unit Two feed belt speeds Electromagnetic brake Combination unit for calibrating and grinding Ribbed steel roller Ø 120 mm with height fine adjustment Hard grinding shoe with graphite pad Universal version for calibrating and sanding of solid wood Model BBS 630 C Article-No. 5343065 Technical data working width 630 mm diameter of the working roller 120 mm sanding belt width 650 mm Sanding belt length 1600 mm Speed of the sanding belt 18 m/s Min./max. workpiece height 3/160 mm Feed speed 4,5 / 9 m/min. Motor power 5 kW / 400 V Gear feed motor 0,43 Height adjustment motor 0,18 kW Compressed air consumption 20 l/min. Operating pressure 5,5 bar Operating pressure belt blower 8 bar Suction pipe diameter 150 mm Suction capacity 3.000 m³/h Dimensions mm 600 x 1010 x 1500 mm Weight 770 kg Location: Comes to stock 54634 Bitburg

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 89293/97-247700, STC-Ref:G-062-4925 Stahl T-52 ,Year: 1997 equipped: - new folding rollers in - centralized vacuum and blow system "Piab" - type: T-52.3T / 4-F - flat pile feeder Gkjdowzttmspfx Ab Uef - 1st folding unit: 4 buckle plates - noise hoods - shingle delivery - without compressors: Seller had centralised air-supply !! - batch counter --> available: 08/2025

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 0 278 06 1192, film width: 700 mm, roll diameter: 700 mm, Used Friz rotary cutter. 1 set of blades has been resharpened. The machine is used and is sold without warranty. Inspection is possible and welcome. Loading facilities available. Gedpfx Abjv Radxo Uskf

Condition: used, Year of construction: 2006, Year of manufacture: 2006 Gkedpfxeww H S Ue Ab Ujf Condition: Very good condition Carton gluing machine suitable for producing: - Standard cartons with 1-3 gluing points from folding boxboard - Clamshell cartons with double fold - Mailing envelopes Materials used: - Folding boxboard 200-600 g/m² - E-flute corrugated board Configuration for standard cartons: - Timing feeder for folding heavy carton types (1 vibrator, 2 air blowers) - Power bridging shaft between feeder and pre-folding station - 3 intake rollers incl. mounting above the bridging station, for very wide products - Digital indicators for faster machine setup - Pre-folding station - Bottom gluing unit incl. applicator wheel (left side) - Folding station - Transfer station - Collection and pressing station - Electronic counter - Pneumatic marking device (compressed air required) - Speed: 400 m/min - Video camera for monitoring the transfer station (camera + monitor at the feeder) - Additional device for producing auto-bottom cartons - 1 device for auto-bottom cartons - 1 soft rubber belt including guide parts and holders - 1 device for pre-breaking the third crease for auto-bottom cartons Additional equipment for other folding methods: - 1 device for folding clamshell cartons with double fold - 1 device for folding sleeves (CD sleeves) 120–380 mm Gluing unit: - 1 HHS gluing unit with holders for dispersion glue application from above - 2 application nozzles for top gluing - 4 controlled channels - 2 light barriers - 1 gluing station - 1 fill level sensor

Year of construction: 2015, condition: used, Touch screen HICUT quick set Gjdpfx Aowrr Hmjb Ujkf Crease pressure dial Emergency shutdown system Rear crease pressure regulator WIDTH 2600