Used Circular Saw Blades for sale (7,798)

Condition: new, Year of construction: 2025, saw blade diameter: 550 mm, input voltage: 400 V, compressed air connection: 7 bar, Equipment: documentation/manual, - Saw blade 550 mm - double miter Cgodpfx Aashzuu Nsasr - 4 pneumatic clamps - Hydrocheck system - mist lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - blowgun - protective cap - documentation - 400V

Condition: new, saw blade diameter: 550 mm, compressed air connection: 7 bar, Equipment: documentation/manual, - Saw blade 550 mm - Double miter - 4 pneumatic clamps - Hydrocheck system - Mist lubrication system Cgjdpferh Dkyjx Aaajr - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - Blow gun - Protective cap - documentation - 400V

Condition: excellent (used), CATALOG NUMBER 6650 TECHNICAL DATA - Max cutting height: 200 mm - Track width: 450 mm - Shaft width: 450 mm - Blade bore diameter: 80 mm - Shaft diameter: 60 mm - Min. blade diameter: 250 mm - Max. blade diameter: 350 mm - Max. width of cant: 870 mm - Min. length of cant: 1500 mm From above: - Pawls - Feed shaft, toothed, metal - Pawls - Feed shaft, toothed, metal - Pressure unit - Shaft with saw blades - 2 feed shafts, metal, pneumatically pressed From below: - Guide - Metal sliding roller - Pawls - Track - Shaft with saw blades - Track - Stepless feed speed adjustment via inverter 4-40 m/min - Main motors: 2 x 75 kW - Feed motor: 3 kW - Electric vertical movement of body up/down: 0.55 kW - Electric adjustment of saw blade shafts: 2 x 0.25 kW - Central lubrication - Extraction nozzle diameter: 2 x 300 mm - Dimensions (L/W/H): 3100 x 2600 x 2000 mm - Weight: approx. 6500 kg - Centering device included - Toothed feed rollers: 3 pcs - Smooth feed rollers: 8 pcs - Motor: 2 x 1.5 kW - Pneumatic top pressure - Side pressure - Dimensions (L/W/H): 4850 x 1100 x 1800 mm - Weight: approx. 1000 kg ADVANTAGES – Czech manufacture – Double-shaft design – Centering device – DTR documentation – Year of manufacture: 2010 Cgedpfxsyk Hg Rs Aaaer – Used multi-blade saw, in very good condition Net price: 262,900 PLN Net price: 62,600 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER: 7947 Technical specifications: - Track width: 300 mm - Shaft working width: 300 mm - Max. saw blade diameter: 350 mm - Saw blade bore diameter: 70 mm - Max. cutting height: 120 mm - Table width with extension: 750 mm - Table length: 1540 mm – From above: - Kickback barriers (anti-return block for material) - Metal roller guide - Kickback barriers - Metal roller guide - Shaft with saw blades - 2 smooth metal idler rollers – From below: - Guide rail Cjdpfxeyx Unte Aaaogr - Kickback barriers - Track (caterpillar) - Central track lubrication - Stepless feed speed adjustment - Feed motor: 1.5 kW - Main motor: 37 kW - Extraction port diameter: 200 mm - Overall dimensions (L/W/H): 1800x1550x1500 mm - Weight: approx. 1700 kg Advantages: – Italian manufacture – Very good condition – DTR technical documentation – Used multirip saw Net price: PLN 33,900 Net price: EUR 8,070 (based on EUR/PLN 4.2) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7950 Technical data: - Track width: 300mm - Working shaft width: 290mm - Max. disc diameter: 300mm - Disc bore diameter: 70mm - Max. cutting height: 100mm - Table width with extension: 680mm - Table length: 1630mm From above: - 2 rows of fingers/kickback pawls - Metal pressure roller - Shaft with saw blades - 2 smooth metal pressure rollers From below: - Guide bar - Fingers/kickback pawls - Track/chain conveyor - Electric body height adjustment (up/down) - Central chain lubrication - 2 feed speeds + variable speed control - Feed motor: 1.1kW - Main motor: 22kW - Extraction port diameter: 170mm - Overall dimensions (L/W/H): 1900x1320x1650mm - Weight: 1700kg Advantages: – Italian-made – DTR technical documentation – Very good condition – Used multi-blade saw Cedpeyx T R Hefx Aaaegr Net price: 34,900 PLN Net price: 8,300 EUR (based on a 4.2 EUR rate) (Prices may vary with exchange rate fluctuations)

Condition: new, Year of construction: 2025, saw blade diameter: 400 mm, - Saw blade 400 mm - Double miter - 4 pneumatic clamps - Mist lubrication system - Blow gun - Protective cap Cedpfxju Si Ndo Aaajgr - documentation - 400V

Condition: used, Year of construction: 2009, Sawblade tiltable 45 ° Cgsdpfx Aaeywnvnjaor cutting width 95 × 60 mm Motor output 1,3 kW bis 1,8 kW kW Saw blade diameter 315 mm Dimensions (L/W/H) 1100x900x1450 mm machine weight ab. 230 kg

Condition: used, capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 200x80 mm Cutting area at 45 degrees left: round 115 mm 150x80 mm Cutting range at 45 degrees right: square 115 mm Cutting range at 45 degrees right: flat 150x80 mm saw blade diameter 350 mm Vice opening 200 mm Cgedpfx Aajywnvheajr dimensions 1100x1000x1700 mm weight 300 kg

Condition: excellent (used), Handheld circular saw MKS 145 EC - Year of manufacture: 2015 - Cutting depth: 145 mm Cgsdpfx Aaoyty D Isasr - Power: 2600 W - Voltage: 230 V - Swivel range: 0–60° - Saw blade diameter: 370 mm - Dimensions: height 430 mm x width 430 mm x length 710 mm - Weight: 13.8 kg

Condition: good (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 600 mm, cutting range round steel at 90°: 220 mm, For sale: 1 used CNC fully automatic aluminum circular saw incl. suction unit Manufacturer: Tronzadoras MG Model: GAA-600 - CNC YEAR OF MANUFACTURE: 2015 TECHNICAL DATA - Cutting range round: 220mm, box: 300 x 90mm, square: 175mm - Drive power 4.1 KW / 400 V / 50 Hz - Speed 3000 rpm. - Cutting speed 55 m/sec. - Blade dimensions 600 x 50 mm - max. cutting height 220 mm - Dimension 2020 x 1510 x 975 mm - Weight 650 kg Machine comes incl. 6m infeed roller conveyor and the appropriate extraction system. The saw can be inspected in our warehouse in 09599 Freiberg. Cgsdpfx Aaouyyhasaor

Condition: used, Year of construction: 2005, saw blade diameter 450 mm cutting diameter 150 mm stroke 1300 mm Cgedpsyutvgjfx Aaasr cutting range 140x140 mm Roller conveyor 6000x350 Roller conveyor 4500x700 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2025, Schnittbereich rund: 20 - 100 mm Cutting area, square (W x H): 20 x 70 mm Shortest length of cut piece : 5 mm Shortest remaining piece length in automatic mode*: 65 mm Shortest remaining piece length in single cut: 30 mm Length: 2300 mm Cjdpswaa Dvofx Aaaogr Width including chip conveyor: 2260 mm Height: 22100 mm Height of material support: 925 mm Weight of machine approx.: 3950 kg Electrical connected load: 26 kW Saw motor power: 18,5 kW Hydraulic motor power: 2,2 kW Cutting speed continuously adjustable: 30-160 rpm Feed speed of the saw: 0,3-30 mm / sec Automatic material feed length, single stroke: 800 mm Length of automatic material feed, multiple strokes: 9999 mm Saw blade diameter: 360 mm Saw blade bore: 40 mm Saw blade thickness: 2,25 mm

Condition: good (used), Year of construction: 2000, Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, underfloor saw, aluminum circular saw, semi-automatic aluminum circular saw, chop saw, glass bead saw -Manufacturer: Kaltenbach, Cold circular saw, metal circular saw with roller conveyor left/right -Type: KKS 400 E Semi-automatic without material feed Cedpfsx Sdpyex Aaasgr -Saw blade: Diameter 400 mm -Drive power: 1.8 / 2.7 kW -Cutting area at 90 degrees flat: 305 x 20 mm / round Ø 130 mm -Cutting area at 45 degrees flat: 245 x 30 mm / round Ø 130 mm -Cutting range for square bars: 90° 120 mm / 45° 110 mm -Miter: swivels on both sides -Cutting speed: 13/26 m/min. -Saw blade feed speed: infinitely variable 0 - 1000 mm/min -Roller conveyor left: total 4000/345/H1000 mm -Roller conveyor right: total 6000/345/H1000 mm -Saw dimensions: 1150/930/H1765 mm -Overall dimensions: 10810/1150/H1765 mm -Total weight: 1190 kg

Condition: new, Year of construction: 2026, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Cgsdpfxofv T Ano Aaajr

Condition: new, Year of construction: 2026, Aluminium Circular Saw UK 600 HA 90°, Semi-Automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile materials made of cast aluminium, copper, and hard plastics (limited suitability for solid material). The machine is characterized by its easy operation and quick, convenient material changes. This model only allows for 90° cuts! The saw feed operates automatically at the press of a button, and material clamping is achieved via two pneumatically controlled vertical and two horizontal clamping cylinders. Standard features include a minimum quantity lubrication system and an air spray gun for machine cleaning. This machine is equipped with connections for a chip extraction system. Additionally, it can be optionally fitted with a digital mitre angle display, a layout laser, and pneumatic lifting for the protective hood. Equipment: - Large support table, high-performance drive motor - Two-button control for initiating the sawing process (optional single-button control available) - Intuitive control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydro-pneumatic saw blade lifting with oil level indicator - Fixed material back jaw can be moved rearwards to increase cutting capacity - Large protective hood covers the entire working area - Minimum quantity lubrication system with 2-litre reservoir - Adjustable saw blade feed speed - Air gun for machine cleaning - Saw blade diameter: 600 mm Work Sequence: Cgjdpfx Aaopa Nxdsaor 1. Set the cutting angle 2. Insert the material 3. Adjust lift speed 4. Bring clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the start button – the machine is ready for operation 7. Press and hold both SAW buttons to initiate cutting 8. After cycle completion, release SAW buttons and press the STOP button 9. Open the clamping fixture and remove or advance the material For technical data such as cutting range, performance, etc., please refer to the data sheet in the email attachment. We look forward to your inquiry! Plantec Maschinen GmbH

Condition: new, Year of construction: 2026, Aluminum circular saw UK 650 HA, semi-automatic The UK 650 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast Cgodeidun Djpfx Aaaor easy changing of the material as well as easy adjustment of the miter angle. The UK 650 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 650 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, Aluminum circular saw UK 352 P, manual The UK 352 P semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple miter angle adjustment. The UK 352 P has an infinitely adjustable miter range left up to 45° and right up to 0° The saw feed takes place automatically at the touch of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. Connections for a chip extraction system are available on this machine. equipment manual guiding of the saw blade Double miter 30° - 90° - 0°, large support plate, powerful drive motor Clear control panel Two vertical pneumatic clamping cylinders Fixed material positioning jaw, can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area minimum lubrication system Air gun to clean the machine Saw blade ø 350 mm workflow 1) Setting the cutting angle Cjdpfxjidunvs Aaasgr 2) Loading the material 3) Bring the clamping cylinder up to 20 mm of material 4) Pneumatic clamping of the material 5) Press the start button to start the saw blade 6) the saw cut must be carried out manually with a hand lever 7) after the end of the cut, the machine is switched off! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine predominantly used for cutting profile materials made of aluminum cast, copper, and hard plastics (solid materials are possible to a limited extent). The machine stands out for its ease of use, rapid and convenient material change, and simple adjustment of mitre angles. The UK 352 HA features a steplessly adjustable mitre range from 45° left to 0° right. Saw feed is automatic at the push of a button, while material clamping is handled by two pneumatically operated vertical clamping cylinders. The machine comes standard with a minimum quantity lubrication system and an air spray gun for cleaning the machine. Connections for a chip extraction unit are provided on this model. Equipment: • Precision under-table circular saw • Mitre adjustment: left 45º / 90º / right -45º degrees • Includes 2 pneumatic vices (vertical) • Steplessly adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop • Extraction connection for chip extraction unit Cgodjgwt Rropfx Aaaer • Mist spray device for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure regulator included • Ergonomically positioned control panel • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included in delivery! You are welcome to view the desired machine at any time in our production/showroom. Please feel free to contact us for an appointment. We look forward to your enquiry! Plantec Maschinen GmbH

Condition: new, Year of construction: 2026, Aluminum circular saw UK 352 M, manual The UK 352 M manual circular saw is an "upcut" machine and is mainly used for individual cuts in aluminium, copper profiles and hard plastics (requires solid material). The The machine is characterized by easy handling and fast, convenient changing of the material and simple adjustment of the miter angle. The UK 352 M has a stepless adjustable miter range left up to 45° and right up to 0°. The saw feed is manual via a hand lever, the material is clamped manually. equipment Double miter 45° - 90° - 0°, large support plate, powerful drive motor Clear control panel A manual clamping cylinder Fixed material feed jaw can be moved backwards to increase cutting capacity large protective hood, covers the entire work area Saw blade ø 350 mm workflow 1) Setting the cutting angle 2) Loading the material 3) manual clamping of the material 4) Press the start button to start the saw blade Cgodpeidunnefx Aaaer 5) the saw cut must be carried out manually with a hand lever 6) after the end of the cut, the machine is switched off! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The UK-400-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-400 A has an infinitely adjustable miter range left and right up to 20° (swivel range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed Cgjdpfx Aasgwt Rnoaor • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 130mm • Saw blade 400mm • Saw blade not included! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing • Precision underfloor circular saw • Miter adjustment left 45º / 90º / right-45º degrees Cgedpfx Ajgwt Ryeaaor • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 125 mm • Saw blade 350mm • Saw blade not included!

Condition: new, Year of construction: 2026, pressure: 6 bar, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Cedpfxogcbwgo Aaaegr

Condition: new, Year of construction: 2026, The UK 500 HA semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 500 HA has an infinitely adjustable miter range of up to 30° on the left and 0° on the right. The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Codpfx Aasgwt R Dsaogr Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 180 mm • Saw blade 500mm • Saw blade not included! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: used, Year of construction: 1992, saw blade diameter 450 mm Saw blade 50 mm capacity 90 degrees: round 150 mm capacity 90 degrees: flat 290x30 mm capacity 90 degrees: square 135x135 mm 0 - 1000 mm/min Cgedpfx Aoyv N Naoaaor rapid return speed 1650 mm/min 0 - 30 ° dimensions of the machine ca. 1500x1200x1770 mm weight of the machine ca. 750 kg

Condition: used, Year of construction: 2003, saw blade diameter 300x32x2,5 mm capacity 90 degrees: round 10-90 mm capacity 90 degrees: flat 80x10-80 mm capacity 90 degrees: square 10-80 mm Cutting range at 90 degrees: round - solid materia 10 - 40 mm Cutting range at 90 degrees: flat - solid material 40x10-40 mm Cutting range at 90 degrees: square -solid materil 10- 40 mm turning speeds 1700/3400 U/min weight of the machine ca. 600 kg Cjdpfx Aeyv Nvtoaaegr dimensions of the machine ca. 2590x1910x1910 mm Accessories: -Footswitch with emergency stop -Micro spraying device -HM circular saw blade 350 mm