Used Cl 1000 Laser for sale (1,133)

Condition: used, Year of construction: 2013, operating hours: 97,817 h, machine/vehicle number: S0631C0211, controller model: Simatic IPC627, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, Note: The machine indicates an error, which suggests a defect in the beam source. The replacement parts recommended by Trumpf cost approximately €30,000. TECHNICAL DETAILS Working Area Travel range X-axis: 3,000 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 600 mm Travel range B-axis: ±135° Travel range C-axis: n × 360° Working height: 605 mm Laser Model: TruDisk 3001 Laser power: 3,000 W Scanning frequency: 10 Hz–100 kHz Axis Speeds Simultaneous axis speed: max. 173 m/min X-axis: max. 100 m/min Y-axis: max. 100 m/min Z-axis: max. 100 m/min B-axis: max. 90 rpm C-axis: max. 90 rpm Accuracy Smallest programmable path increment: 0.001 mm Positioning deviation, linear axes X/Y/Z: max. 0.03 mm Positioning deviation, rotary axes B/C: max. 0.005° Positioning error, linear axes X/Y/Z: max. 0.08 mm Positioning error, rotary axes B/C: max. 0.015° MACHINE DETAILS Control and Data Processing Control model: Simatic IPC627 Hard disk storage: 60 GB Color monitor: 12" TFT Network speed: 100 Mbit/s Modem: 56 kBaud/s Pneumatics and Cutting Gas Gedpez Dvfxofx Ad Rsui Connection pressure: min. 6 bar Connection pressure: max. 14 bar Compressed air consumption, machine: approx. 30 Nm³/h Compressed air consumption, short-term: max. 40 Nm³/h Cutting gas working pressure: max. 20 bar Electrical Connection Base machine: 47.0 kVA Laser unit TruDisk 3001: 19.5 kVA Laser unit TruDisk 4001: 27 kVA Cooling unit TruDisk 3001: 9 kVA Cooling unit TruDisk 4001: 12 kVA Operating hours: 97,817 h EQUIPMENT Hard disk with RAID controller USB interface Ethernet network connection RJ-45 connector Support for ET BEUI, TCP/IP, Novell Server, and NTFS file system Solid-state laser from the TruDisk series Fast rotary changer with tooling and control system Scrap conveyor for continuous removal of cut-outs and scrap grids

Condition: excellent (used), Trumpf TruMark 3000 Industrial laser Laser marking system 2 units in stock. Guedez Azwgspfx Ad Rji

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,100 h, Manufacturer TRUMPF Type TruMatic 1000 - 1600 Fiber (K07) Year Gusdpfx Adjzgfnqe Rsi 2018 X-axis travel 3000 mm Laser nominal power 3000 Watts Control system Bosch CML 45 Punching force 16.5 to Max. sheet thickness 6.4 mm Max. material weight 150 kg Standard configuration Machine ⦁ Box frame ⦁ Hybrid axis system ⦁ Linear magazine with 20 stations for clamps and tools ⦁ Hydraulic clamps (3x) ⦁ Drives with maintenance-free AC motors ⦁ Follow-up device with programmable pressure foot ⦁ Foot switch for closing the clamps ⦁ Part separator chute, right ⦁ Part removal flap, left ⦁ Sensor for part removal flap ⦁ Work area lighting ⦁ FocusLine ⦁ SortMaster Compact (retrofit option) TRUMPF Laser ⦁ LLK according to standard layout (10m) ⦁ Laser power control ⦁ Laser log function ⦁ Enclosed beam guidance via laser light cable (LLK) ⦁ Separate power supply for the TruDisk Compact cutting unit ⦁ Solid-state laser compact cutting system ⦁ Protective glass ⦁ Collision protection ⦁ ControlLine Punching head ⦁ Delta drive ⦁ Rotatable single-station tool adapter ⦁ Programmable pressure foot position ⦁ Tool length compensation ⦁ Punch spray lubrication ⦁ Punch slug vacuum ⦁ Forming function ⦁ Punching stroke counter Control system ⦁ TRUMPF control system based on Rexroth IndraMotion MTX ⦁ Touch panel with TFT 19" color screen ⦁ Integrated technology data ⦁ Programmable cutting gas pressure ⦁ Interface for remote maintenance ⦁ Automatic shutdown with wake-up function ⦁ Program manager ⦁ Production plan Options: Copper cutting package Brass cutting package Compressed air cutting Outfeed of small parts Brush tables Multitool Sensor for part separator chute Sign function, quick beading Multibend Thread forming Deburring roll technology Sorting function for part separator chute Height-adjustable clamps

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, power: 2 kW (2.72 HP), warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, The Yawei HPML30510 is a combined laser punching and cutting system for highly precise and efficient sheet metal processing in industrial applications. The machine combines servo-electric punching with laser cutting, achieving high processing speeds while maintaining low energy consumption. Thanks to its robust construction, automated systems, and modern CNC technology, the HPML30510 is particularly well-suited for demanding series production. The machine offered here is a demonstration model, in stock, immediately available, in new condition, and is offered with delivery (within Germany), commissioning, warranty, etc. It includes a comprehensive set of tools. It can be tested under power. Operating mode: Servo punching / laser cutting Punching force: 294 (30) kN (t) Laser power: 3000W Max. processing size (punching): 1600 x 3000 mm Max. processing size (cutting): 1500 x 2500 mm Max. material thickness: 6.35 mm (sphere) / 3 mm (brush) Max. punching diameter: 88.9 mm Stroke rate: 2000 cpm Punching frequency (1mm pitch): 700 cpm Punching frequency (25.4mm pitch): 400 cpm Accuracy (punching/cutting): ±0.10 mm Combined accuracy: ±0.15 mm Clamps: 4 pcs Tool stations: 38 pcs CNC system: Siemens 840Dsl CNC axes: 11 Max. sheet metal speed: 102 m/min Turret speed: 30 rpm Max. load: 180 kg Dimensions (length): 8000 mm Guodpfjz D Th Dox Ad Rji Dimensions (width): 8000 mm Dimensions (height): 2300 mm Machine weight: 20000 kg

Condition: new, functionality: fully functional, Year of construction: 2026, power: 1,500 kW (2,039.43 HP), overall weight: 235 kg, Equipment: CE marking, documentation/manual, Cleaning, welding, cutting, and weld cleaning — the handheld laser welding machine can improve the efficiency of your production. It’s able to weld carbon, stainless steel, aluminum and titanium alloys, plastics, and various dissimilar materials. This laser welder is easy to operate and features a user-friendly interface. Wattsan Laser Welding includes a 10-meter cable, which allows you to operate freely. The gun weighs only 1 kg and includes an auto-wire feed. This model has 1 mirror and 1 seam type. Gujdpfx Adeiichhj Rsi You can give our managers a call for additional details! Wattsan Welding machine characteristics: Cooling: water Laser power: 1500-3000 W Machine size: 1075x664x1055 mm Laser source: JPT / Raycus Weight: 235 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our website you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 2026, condition: new, functionality: fully functional, power: 6,000 kW (8,157.72 HP), overall weight: 3,700 kg, table length: 3,000 mm, table width: 1,500 mm, Equipment: CE marking, documentation/manual, It's time to enhance your production efficiency by 1.5 times! The Wattsan 1530 Tablechange laser metal cutter can operate materials as thick as 15 mm. It can handle stainless steel, carbon steel, galvanized steel, copper, aluminium, and titanium. Guodpfx Adoiicv So Rji This CNC laser cutter for metal has two working tables that measure 1500x3000 mm, which can replace each other. The loading rollers of the accurate Wattsan 1530 facilitate material input. Overall, it improves manufacturing efficiency by eliminating the need to waste time loading and uploading items. You can give our managers a call for additional details! Wattsan 1530 Tablechange characteristics Working area: 1500x3000 mm Laser power: up to 6000 W Weight: 3600 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 2026, condition: new, functionality: fully functional, power: 6,000 kW (8,157.72 HP), overall weight: 2,000 kg, table length: 2,500 mm, table width: 1,300 mm, Equipment: CE marking, documentation/manual, This laser metal cutting machine can operate sheet material with a thickness up to 12 mm. Wattsan 1235 can cut stainless steel, carbon steel, galvanized steel, copper, aluminum, and titanium. It features a working space of 1300x2500 mm. The loading rollers of the precise Wattsan 1325 S make material feeding easier. The S-series laser metal machine has a maximum travel speed of 120 meters per minute. Laser power can be up to 6 kw. The bed here is made of steel. You can give our managers a call for additional details! Wattsan characteristics Working area: 1300x2500 mm Laser power: up to 6000 W Weight: 1640 Gujdpfsiicwzox Ad Rsi Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 2025, condition: new, Laser cleaning device for derusting, descaling, and cleaning of materials and components. These are absolute professional-grade machines. Ideal for classic car restorations as well as use in the automotive, metal, and plastics industries. We are happy to assist you in finding the right solution and can test your application here at our factory. The operation of these machines is easy to learn. Godpfeiq I Nlox Ad Roui

Condition: new, Year of construction: 2025, Laser source: Raycus or Max: 4/6/8/12 kW Laser head: 3D BOCI Control system: FSCUT 5000 A Chuck: 20-450 mm Loading/unloading: 12000 mm X/Y axes Positioning accuracy: ±0.05/1000 mm Repeatability: ±0.03/1000 mm Acceleration: 0.8g (m/s²) Rotational speed: 60 rpm Max. positioning speed: 60 m/min Max. weight of a tube: 1500 kg 1. Raycus 6000W laser source 2. BEVEL laser head 3. Welded frame DPL 4. Schneider electrical components 5. Helical rack KH 6. Techmech reducer Gedpfx Aoi Apfzsd Rsui 7. Yaskawa servomotor 8. SHAC guides 9. Integrated power control 10. FScut 5000 software 11. Integrated electrical cabinet 12. HANLI water chiller 13. Cantilever gantry axis-X FHBS 14. Automatic waste collection 15. Crawler-type automatic workpiece collection 16. Automatic support system 17. Loading frame 12000 mm 18. Unloading frame 12000 mm

Condition: new, SICK S30B-3011BA Safety Laser Scanner Features Design: Sensor without system connector Application: Indoor Protective field range: 3 m Warning field range: 8 m (at 15% remission) Distance measurement range: 30 m Type of field set: Triple field sets Number of field sets: 1 Number of fields: 3 Number of monitoring cases: 1 Scanning angle: 270° Resolution (configurable): 30 mm, 40 mm, 50 mm, 70 mm, 150 mm Angular resolution: 0.5° Response time: 80 ms 1) Protective field offset: 100 mm Number of multiple evaluations: 2 ... 16, configurable Gjdpfxspudqxj Ad Rsui Delay of automatic reset: 2 s ... 60 s, configurable Safety-related parameters Type: Type 3 (IEC 61496) Safety Integrity Level: SIL2 (IEC 61508) Category: Category 3 (EN ISO 13849) Performance Level: PL d (EN ISO 13849) PFHD (mean probability of a dangerous failure per hour): 8.0 x 10-8 TM (service life): 20 years (EN ISO 13849) Function Restart lock: ✔ Safety relay monitoring (EDM): ✔ Multiple evaluation: ✔ Contour as reference: ✔ Integrated configuration memory: ✔ Measurement data output: Via RS-422 Secure SICK device communication via EFI: ✔ Connection type Connection type: System connector with or without connection cable Universal I/Os: 5 1) Inputs Safety relay monitoring (EDM): 1 2) Reset/restart: 1 2) Stand-by: 1 Outputs OSSD pairs: 1 Signal outputs: 3 3) Type of configuration: PC with CDS (configuration and diagnostics software) Configuration and diagnostics interface: RS-232 Transmission rate: 38.4 kBaud Data interface: RS-422 Transmission rate: ≤ 500 kBaud Secure SICK device communication via EFI Transmission rate: ≤ 500 kBaud Cable length: ≤ 50 m Conductor cross-section: 0.22 mm² 1) Freely programmable, e.g., safety relay monitoring input, reset input, contamination warning, reset required. 2) Availability depends on the configuration of the universal I/Os. 3) Freely programmable, e.g., warning field, contamination, reset required. Protection class III (EN 50178) EN 60950 Supply voltage Uv: 24 V DC (16.8 V DC ... 30 V DC) Current consumption: ≤ 0.33 A 1) ≤ 1.7 A 2) Outputs Safety outputs (OSSDs): 2 x 250 mA Signal outputs: 3 x 100 mA 3) 1) At 24 V DC without output load. 2) At 24 V DC with maximum output load. 3) Freely programmable, e.g., warning field, contamination, reset required. Item condition: new, from inventory clearance (without original packaging) Year of manufacture: 2017 You can find more scanners - new and used - in our shop! International shipping costs on request!

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 12,000 W, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 15 mm, power: 12 kW (16.32 HP), warranty duration: 24 months, Equipment: safety light barrier, DURMA HD-FN 3015 fiber laser cutting system: The ideal price-performance solution. The DURMA HD-FN 3015 fiber laser cutting system is the best choice for companies looking for maximum performance and efficiency at an unbeatable price. This state-of-the-art system combines innovative technology with user-friendly operation, offering outstanding benefits for metalworking. Technical specifications Laser power: 12 kW With automatic shuttle table Maximum sheet thickness: Mild steel: 30 mm Stainless steel: 25 mm Aluminum: 30 mm Copper: 15 mm Cutting area: 3060 x 1525 mm Movement axes: X-axis: 3060 mm Y-axis: 1525 mm Z-axis: 125 mm (max. 275 mm) Metal sheets Maximum sheet size: 3048 x 1524 mm Maximum sheet weight: 240 kg/m² Speed and precision: Maximum speed X-axis: 100 m/min Maximum Y-axis speed: 100 m/min Maximum simultaneous speed: 141 m/min Maximum acceleration: 14 m/s² Positioning accuracy: ± 0.05 mm Repeat accuracy: ± 0.05 mm Main features of the system: ・Changing table: Positioned lengthwise for best access to loading and unloading systems. ・Enclosed cutting chamber: Equipped with protective glazing for maximum safety. ・CNC graphic control: With a user-friendly touchscreen for easy operation. ・Laser source: Brilase 12 kW. ・Cutting head: Automatic adjustment of the focus for precise cutting processes. ・Integrated cooling system: Ensures efficient cooling of the cutting head and laser source. ・CAD/CAM software: Enables programming including autonesting for optimum material utilization. ・Positioning laser: Supports the exact positioning of workpieces. ・Sheet metal check system: Automatic detection of the sheet metal position and dimensions for improved process reliability. ・Automatic nozzle cleaning: Ensures continuous cutting quality. Gedpfx Aeu E Tczjd Reui ・Central lubrication: For smooth machine maintenance. ・Waste box: For a clean working environment. ・Work area lighting: Ensures good visibility during operation. ・Multi-chamber extraction system: Effective removal of smoke and particles. ・Light barrier protection: Ensures safety when changing tables. ・Remote maintenance access: Facilitates remote diagnosis and maintenance.

Condition: new, functionality: fully functional, control type: CNC control, Laser power - 6 kW Laser source - MAX Photonics CNC control - FSCUT3000 EtherCAT-BUS Software - CAD/CAM: Tubest, Tube Pro Gujdpfownq T Rox Ad Rji Processing area: Diameter - 15-240 mm Loading - 100-6000 mm Unloading - 100-3000 mm Load capacity - up to 300 kg X/Y positioning accuracy - ±0.05 mm/m X/Y repeat positioning accuracy - ±0.03 mm/m

Condition: new, functionality: fully functional, Processing range: Diameter - 40-550mm, Length - 6000-12000mm Laser source - MAX Photonics Laser power - 6000W/12000W Laser head - Boci BLT5 bevel head CNC control - FSCUT5000S EtherCAT-BUS Software - CAD/CAM: Tubest, Tube Pro Gjdpfxjwnrars Ad Rsui Loading - 4000-12000 mm Unloading - 0-8000mm Load capacity - max. 3000kg X/Y positioning accuracy - ±0.05 mm/m X/Y repeat positioning accuracy - ±0.03 mm/m

Condition: new, Year of construction: 2026, table length Rohmateriallänge 6500 mm table width Rohrdurchmesser max. 230 mm burner heads 1 Control CNC workpiece weight 300 kg traversing speed 91 m/min weight 5750 kg dimensions of the machine ca. 12900 x 2370 x 2650 mm Tube laser with T-loader Configuration 1. Bodor Power laser source 6 KW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Pneumatic chuck 5. Adaptive adjustment of jaw clamping force 6. Follow-up servo blanking clamp 7. Support for composite clamping rollers 8. Active collision avoidance 9. Automatic tube inspection 10. Automatic tube edge detection and positioning 11. Automatic adjustment of cutting gas 12. Laser cutting process database 13. Air-saving continuous jet nozzle 14. Intelligent maintenance reminder 15. WIFI internet connection 16. Water cooler 17. Extraction system 18. Wear parts set 19. Auxiliary feeding device T-Loader: - One-click adjustment - Material shortage alarm - Automatic loading - Scratch-resistant tube - Host safety lock - Tube size range: Round tube 20 - 220 mm Square tube 20 - 220 mm Rectangular tube 220 mm = side length = 20 mm - Maximum tube weight: 300 kg - Pipe loading length range: 4500 mm-6500 mm - Maximum loading weight: 1800 kg CUTTING CAPACITY: STRUCTURAL STEEL 16 mm STAINLESS STEEL 12 mm Gedpfowh Uldsx Ad Rsui ALUMINUM 10 mm WALL THICKNESS STRUCTURAL STEEL* (mm) If DM < 50: WS = 1.2 If DM = 50: WS = 2.5% × DM Max. finished part length 4500 mm OPTIONAL: LANTEK FLEX3D TUBES PLUS

Condition: used, Year of construction: 2010, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: E1053A0012, overall weight: 850 kg, total height: 1,940 mm, total length: 1,700 mm, total width: 950 mm, Specification: Protection class: IP54 Power: 16kW/17 kVA 24A at 400V Frequency: 50-60 Hz Supply voltage: 380V (-10%) to 460V (+10%) Guodpowq Rmpjfx Ad Rei The Trumpf Laser TruDisk 2602 is a robust and powerful laser system, perfectly suited for demanding industrial applications. It features high precision and efficiency, enabling fast and high-quality cutting operations on various materials. Thanks to its compact design, the system can be easily integrated into existing production processes.

Condition: new, functionality: fully functional, Year of construction: 2025, Laser source - MAX Photonics Table size - 3000x1500mm Control - FSCUT 6000 Software - Cypnest+Cypcut Laser head - Boci BLT442 autofocus head Nitrogen proportional valve - SMC Power stabilizer - 120kVA Water chiller - Hanli Load capacity up to 5760kg Laser power - 12,000 W X/Y positioning accuracy - ±0.05 mm/m X/Y repeat positioning accuracy - ±0.03 mm/m Maximum traverse speed - 120 m/min Maximum acceleration - 1.5 G CNC control - FSCUT 6000 Gujdpewnpmcofx Ad Roi Power supply - 380V 50Hz three-phase

Condition: new, functionality: fully functional, Laser source: MAX Photonik Laser head: Boci BLT5 bevel head Processing range: Diameter: 40-550 mm Length: 4-12 m loading, 0-12 m unloading Load capacity: Max. 3000 kg Guedswtzp Hopfx Ad Rsi Servo support CNC control: FSCUT5000S EtherCAT-BUS Software: CAD/CAM: TubesT, Tube Pro

Condition: new, functionality: fully functional, Laser source: MAX Photonics G5 Laser head: Boci BLT4 autofocus head Control system: FSCUT 9100 Software: Cypnest+Cypcut Table size: 8200 x 3200 mm Guodpfx Aewtzu Ajd Rji Load capacity up to 9600 kg Straight cutting area: 8850 x 3700 mm Bevel cutting area: 8100 x 3050 mm

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container Godpfxjz Rl Uqe Ad Roui

Condition: like new (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, TruLaser Cell 3000 5 axes (rotary table and tilting head) Max. travel in X: 800 mm Max. travel in Y: 600 mm Max. travel in Z: 400 mm Max. travel in B: +/- 135° Max. load per side: 98 kg Gujdpfx Aez Rpnzed Rji Rotary plate diameter: 1,070 mm Max. axis speed: 85 m/min Max. laser output: 8000 W Max. power at the workpiece: 3000 W Beam quality: 4 mm*mrad

Condition: excellent (used), Trumpf TruTool C160-2 Plus electric slotting shears. Gjdez Sb Ikjpfx Ad Roui The shears are in very good condition.

Condition: used, functionality: fully functional, Year of construction: 2004, Mazak Super Turbo-X612 Mk II (2004) CO2 laser cutting machine with 4,000 W laser output for 4,000 x 2,000 mm sheets up to 25 mm thick. Mazatrol L32B CNC control. CNC CONTROL Controller: Mazatrol L32B LASER Laser source: CO2 Rated laser output W: 4.000 TRAVELS & WORK AREA X-axis travel mm: 4.185 Y-axis travel mm: 2.020 Z-axis travel mm: 100 Max. sheet size mm: 4.000 x 2.000 Gsdps Aa A Tujfx Ad Rsui Max. table load kg: 1.500 DIMENSIONS Machine weight kg: 23.900 EQUIPMENT & OPTIONS • Mazatrol L32B CNC control • CO2 laser resonator, 4,000 W rated output

Condition: good (used), functionality: fully functional, Year of construction: 2006, AMADA LC-2415 ALPHA IV NT 2.5 kW Specification Details Manufacturer: AMADA Model: LC-2415 ALPHA IV NT Guedpfxe Abrlpo Ad Roi Year of Manufacture: 2006 Condition: Used Machine Type: CNC CO₂ Laser Cutting Machine Laser Power: 2.5 kW Laser Type: CO₂ laser Laser Oscillator: FANUC AF2000i-C / AF2000E-LU2.5 CNC Control: AMNC-F / FANUC Total Operating Hours: 25,729 h Working Range – X Axis: 2,520 mm Working Range – Y Axis: 1,550 mm Working Range – Z Axis: 300 mm Maximum Processing Dimensions: 5,040 × 1,550 mm with one repositioning Maximum Table Load: 330 kg Maximum Cutting Speed: 20 m/min Maximum Positioning Speed – X/Y: 80 m/min Maximum Positioning Speed – Z: 60 m/min Positioning Accuracy: ±0.01 mm / 500 mm Repeat Positioning Accuracy: ±0.005 mm Maximum Sheet Thickness – Mild Steel: Up to 12 mm* Maximum Sheet Thickness – Stainless Steel: Up to 6 mm* Maximum Sheet Thickness – Aluminium: Up to 6 mm* Drive System: AC servo motors Number of Controlled Axes: 3 (X, Y, Z) Laser Wavelength: 10.6 μm Laser Beam Mode: TEM₀₀ equivalent Beam Divergence: < 2 mrad Laser Stability: ±1% Cutting Speed: 0–20 m/min Assist Gas Connections: 3 Automatic Gas Pressure Control: Yes Automatic Focus Adjustment: Yes Automatic Sheet Repositioning: Yes Automatic Sheet Loading/Unloading: Depending on configuration Cutting Head: HS-2003 Adaptive Optics: ActiveCut High-Pressure Cutting System: CleanCut Specification Details Aluminium Cutting System: ALUCUT Extraction System: Included / depending on configuration Cooling Unit: Included Power Supply: 400 V / 50 Hz / 3-phase Compressed Air Requirement: Approx. 250 l/min at 6 bar Machine Length: 5,745 mm Machine Width: 2,630 mm Machine Height: Approx. 2,150–2,275 mm* Machine Weight: Approx. 7,500 kg Laser Class: Class 1 during intended operation * - The actual maximum sheet thickness that can be processed depends on the material, its quality and processing conditions.

Year of construction: 2025, operating hours: 5 h, condition: as good as new (ex-display), functionality: fully functional, The cleaning system utilizes the latest and most advanced technology for precise surface cleaning available on the market. The high energy efficiency and instant heat generation of the laser produce an explosive effect on the material’s surface, effectively vaporizing and removing contaminants and unwanted residues—contact-free, environmentally friendly, and efficient. Guedpfx Adsyffdke Rsi Compared to traditional industrial cleaning methods, laser cleaning offers numerous advantages: it is eco-friendly, highly efficient, space-saving, flexible, and easy to operate—making it increasingly preferred by companies.

Condition: good (used), Year of construction: 2020, Epilog Cameo Zing 24 Co2 Laser with UML 340 extraction Year of acquisition: 2020 (year of manufacture: 2019/2020) Including rotary engraving device and compressor Laser power: 30 watts Guodpeyh Rhkofx Ad Roi Max. working area: 610×305 mm Max. working height: 191 mm Laser safety class: 2 Resolution: 1,000 dpi Frequency: 10–5,000 pulses/inch Interfaces: 10 Base T-LAN, USB No additional software included. #8480