Used Clamp Bar for sale (26,688)

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit -Manufacturer: Orsta, universal unit Guedpfev Auxuox Ab Ujk -Engine: 2.2 kW/1410 rpm -Nominal pressure max.: 160 bar -Liter output: 2.5 l/min -Hydraulic tank/filter/valves: see pictures -Dimensions: 750/380/H620 mm -Weight: 110 kg

Condition: good (used), Year of construction: 2017, operating hours: 15,940 h, load capacity: 3,500 kg, lifting height: 6,040 mm, fuel type: electric, mast type: triplex, construction height: 2,725 mm, empty load weight: 5,500 kg, mileage: 15,940 km, This TRIPLEX forklift from STILL is from 2017 and in good condition; The forklift has a capacity of 3,000 kg; Lifts up to a height of 6,040 mm; The forklift is equipped with FREELIFT; Fitted with SIDESHIFT; Clearance height of 2,725 mm; Equipped with a Cascade clamp; Clamp dimensions: 219 mm inside width; 150 mm height; 130 mm width; 200 cm height with bracket; clamps up to 41 cm; Fitted with new NON MARKING tires; The 2019 battery comes with an external charger and automatic filling system; Schedule a test drive; Video to follow. Guodpfjx A Ev Hex Ab Ujk

Condition: used, Attachment suited for: Agricultural machines Gujdpfx Absx Hhbcs Uek

Condition: ready for operation (used), Festo DGPL-32-900-PPV-A-KF-B linear actuator 161793 – 8 bar, used, in good condition, 100% functional, delivery scope as shown in the photos Gujdpfx Aex Ermaeb Usk

Condition: used, mileage: 36,253 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,660 mm, first registration: 02/2023, fuel tank capacity: 71 l, CO₂ emissions: 283 g/km, emission class: euro6, color: grey, number of seats: 3, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, cruise control, immobilizer system, sliding door, tail-lift, = Additional Options and Equipment = - Right-hand side sliding door - Attention assist - Automatic dipped headlights - Heated exterior mirrors - Front electric windows - Electrically folding exterior mirrors - Electrically adjustable exterior mirrors - Euro 6 - Driver airbag - Remote central locking - Hill-hold control - Wooden load compartment floor - Height-adjustable driver's seat - Height-adjustable steering wheel - Metallic paint - Front center armrest - Multifunction steering wheel - Radio with DAB - Rain sensor - Tyre pressure monitoring system - Reversing camera - Start/stop system - Immobiliser - Thermal insulation glass - Partition wall = Further Information = Availability Reserved: This vehicle is reserved for a customer (provisionally sold). General Information Number of doors: 5 Model range: Oct. 2021 - Mar. 2024 Cab type: single cab Technical Information Torque: 340 Nm Number of cylinders: 4 Gujdpfx Abjxnqa Us Uok Engine capacity: 1,950 cc Transmission: 6-speed manual gearbox Dimensions Length/Height: L2H2 Weights Unladen weight: 2,471 kg Payload: 1,029 kg Gross vehicle weight: 3,500 kg Functional Tail lift: Bär, rear tailgate, 600 kg capacity Interior Interior: black Maintenance, History, and Condition Booklets: Available APK (Dutch Roadworthiness Certificate): valid until 03.2027 Number of keys: 2 (2 remote controls) Financial Information VAT/margin scheme: VAT deductible Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 23,000 mm, total width: 7,800 mm, total length: 10,400 mm, pressing force: 25 t, table width: 780 mm, table length: 200 mm, operating speed: 13 mm/s, reverse speed: 24 mm/s, stroke length: 480 mm, operating pressure: 230 bar, oil tank capacity: 20 l, power: 3 kW (4.08 HP), MULTI-PURPOSE workshop / press Available in both 20 and 25 tons. BAR-MAN 20: 3,450 euros BAR-MAN 25: 3,990 euros Godpot A Dznsfx Ab Uouk The BAR-MAN can be used for a wide range of applications. Examples include maintenance work, cutting keyways, pressing bearings in and out, and much more. With this powerful machine, you can tackle almost any task, all while maintaining maximum operator comfort.

Condition: used, The APV Gaulin homogenizer MC 25-3,5TPS is a high-pressure homogenizer commonly used in various industries, including food, pharmaceutical, and chemical manufacturing. Here are some key features and details about this model: - High Efficiency: The MC 25 series is designed for efficient homogenization, allowing for the production of stable emulsions and fine dispersions. Gusdsxx Sbujpfx Ab Uek - Adjustable Pressure: It typically allows for pressure adjustments, enabling customization of the homogenization process based on the nature of the product being processed. - Versatile Applications: This homogenizer can be used for various applications, including dairy processing, beverage production, cosmetic formulations, and more. - Robust Construction: Built for durability, it often comes with stainless steel components that are resistant to corrosion and wear, making it suitable for demanding environments. - Ease of Use: These homogenizers usually feature user-friendly controls for ease of operation and maintenance. - Maintenance: Regular maintenance is essential to ensure optimal performance and longevity. This may include checking seals, cleaning components, and monitoring wear parts. Capacity: 8,000 L/h Pressure: 240 Bar Stages: 2 Motor KW: 65 Weight: 2,625 kg Condition: Good

Condition: used, mileage: 462,000 km, power: 290 kW (394.29 HP), fuel type: diesel, color: white, axle configuration: 4x2, fuel: diesel, wheelbase: 5,520 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,460 mm, loading space length: 7,400 mm, loading space height: 2,380 mm, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, navigation system, spoiler, tail-lift, traction control, General information Year of manufacture: 2020 Technical information Number of cylinders: 6 Engine capacity: 10.677 cc Front axle: Steering; Tyre profile left: 50%; Tyre profile right: 50%; Suspension: leaf suspension Rear axle: Double wheels; Tyre profile left inner: 100%; Tyre profile left outer: 100%; Tyre profile right outer: 100%; Tyre profile right outer: 100%; Suspension: air suspension Measures Gujdpfx Ajx E Am Reb Usk Dimensions (LxW): 961 x 255 cm Weights Empty weight: 9.300 kg Carrying capacity: 8.700 kg GVW: 18.000 kg Functional Tail lift: Bar, tail lift, 2000 kg

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 1,400 kg, empty load weight: 390 kg, drive type: Keine, Cellulose/Bale Clamp Load Center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: None Gedpfx Aox Efg Rsb Usuk Technical Condition: Very good Description: Model 1.5T413, sideshift +/- 100 mm, sideshift independent of the opening range, overall width 970 mm, opening range 495 - 1675 mm, arm height 440 mm, arm length 1,000 mm, arm smooth on the outside, inside fitted with round bar, arm tips bevelled, load capacity 1,400 kg at 500 mm load center, front dimension 158 mm, center of gravity at 289 mm, weight approx. 390 kg, includes pressure gauge, ISO - Class 2 A connection.

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 2,200 kg, empty load weight: 618 kg, opening width: 1,120 mm, Roller clamp Load center of gravity: 650 ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: Very good Gedjvb Rctjpfx Ab Uouk Description: In addition to this device, we offer other forklifts and warehouse technology devices. Our devices are workshop and FEM4.004 tested. Please contact us by e-mail or by phone. You can also find us at hsr-gabelstapler Of course, we will also buy your used truck, even without you purchasing a vehicle from us. Installment plan & financing on favorable terms are available on request. We will be happy to advise you competently and in detail about our vehicles.

Year of construction: 2000, condition: good (used), 3-jaw wedge bar chuckFabr.SMW Typ:HG 200 bj.ca.2000Bore 50mmFlansch Aufnahme Diameter 170mmWithout jaws,with chuck key.chuck in good condition. Gusdpfx Aod Sym Asb Uek

Condition: used, Year of construction: 2014, operating hours: 1,020 h, Delivery rate 3.7 m³/min, pressure range 3.5 - 9.5 bar, 2 air connections, overrun brake, support wheel, vehicle may be covered with advertising and/or lettering. Gsdpfjv Shbbsx Ab Ueuk Our offer generally does not include a new TÜV inspection. If you require a new TÜV inspection, we would be happy to provide you with a quote from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this vehicle. Please contact us!

Condition: used, d1: 35 mm d2: 27 mm (wrench size) overall length: 195 mm * d1 = 35mm, * d2 = 27 mm (wrench size), * Total length: 195mm. Gjdpolkclkjfx Ab Ujuk

Condition: used, functionality: fully functional, 4 used adjustable wheel clamps for recovery crane, etc., fully functional. No shipping possible. Please do not send email enquiries! If you have any questions, you can reach us by phone. Viewing and collection only by prior telephone appointment. Gujdpfxox Hu Ics Ab Uek Subject to changes, prior sale, and errors. We are a member of the Federal Association of Independent Motor Vehicle Dealers (BVfK) and carry the BVfK quality seal!

Condition: good (used), CNC lathe with short bar loader and NC tailstock! Available immediately! Year of manufacture 2011 – first commissioning 2015; Low operating hours, Fanuc control with Manual Guide i; 250 mm chuck, 65 mm spindle bore, turning length approx. 750 mm; Box guideways in X and Z; Chip conveyor; Tool setter; LNS short bar loader; Parts catcher with belt; Various tool holders, fixed and driven; Fully equipped for turning; Godpfxex Ey Ske Ab Usuk

Condition: used, Mechanical High-Pressure Machine Vice GRESSEL Type MHS 126-3 High-pressure clamping device Jaw width: 125 mm Jaw height: 40 mm Opening width: 221 mm Clamping force: 2 / 3 / 4 tons Guideway height: 62 mm Gjdpjxlkvdsfx Ab Ujuk - Clamping force adjustable in 3 stages - High-pressure vice with mechanical power amplifier - Clamping range adjustable in 2 stages - Lateral thread for workpiece stop Dimensions: 440 x 140 x 102 mm Weight: 26 kg

Condition: not inspected (used), Year of construction: 1989, We are offering the following as part of an insolvency sale: 2 x CNC lathes (1 x with sub-spindle, 1 x with lower turret), used Godpfx Absx Edz Ts Ueuk + Bar feeder + Accessories 1. CNC lathe with sub-spindle Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 2 x collet chucks - 1 x 3-jaw chuck 2. CNC lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 x collets - Approx. 40 x jaw sets - Various tool holders + tools - Documentation The machines are untested, but they were in operation until decommissioning. Sale is ex-location; loading can be provided at extra cost.

Condition: used, Used 2 rack roll cage, bearing the Kruizinga trademark, is a practical transport solution for various applications. Equipped with 2 removable clamp gates made of galvanized steel, keeping the cargo securely in place during transport. Gsdjw Sxq Repfx Ab Usuk Comes standard with 2 nylon straps to keep the goods firmly in place and prevent them from sliding or

Condition: used, * like new * 130x12x20mm Gusdpfx Aelf Ncrjb Uok

Condition: used, mileage: 496,426 km, power: 175 kW (237.93 HP), first registration: 08/2012, overall weight: 11,990 kg, fuel type: diesel, color: blue, axle configuration: 4x2, maximum load weight: 5,160 kg, empty load weight: 6,830 kg, wheelbase: 4,760 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space width: 2,470 mm, loading space length: 7,300 mm, loading space height: 2,200 mm, number of seats: 2, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, immobilizer system, onboard computer, power assisted steering, seat heater, soot filter, spoiler, tail-lift, traction control, trailer coupling, * German vehicle * Condition as shown in photos * Junge body with tarpaulin and frame * Body dimensions: L=7,300 mm x W=2,450 mm x H=2,200 mm * Aluminium drop sides * Removable centre stanchions * BÄR tail lift, 1,500 kg capacity * Anti-slip plywood floor * Trailer coupling * Permissible trailer load: 16,000 kg * Air conditioning * EBS (Electronic Braking System) * Comfort driver's seat, air-suspended * Seat heating * Multifunction steering wheel * On-board computer * Armrest * Hill start assist * Enhanced engine brake * Cruise control * CD radio with Bluetooth * Electric windows * Differential lock * Roof hatch * Air suspension lift & lower function Guodpfx Aboxgg U Ej Usk * ABS and ASR * 6-speed manual transmission * Roof spoiler * Electrically adjustable, heated mirrors * Storage box * Tinted windscreen * Fog lights * Daytime running lights * Wheelbase: 4,760 mm * Gross vehicle weight: 11,990 kg * Unladen weight: 6,830 kg * Payload: 5,160 kg If a new TÜV approval is required, we are happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. More trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend a viewing and inspection of the goods in order to avoid any misunderstandings regarding condition or suitability. Viewings and inspections are possible at any time by prior appointment and are expressly encouraged. All information is provided without guarantee. We do not accept liability for mistakes or incorrect information in this offer. The buyer is obliged to independently verify the condition and specification of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: used, Used 2-door roll container with wooden roll base fitted with nylon wheels and metal corner reinforcement. Each roll container comes with 2 straps as standard. Ideal for distributing products to and from stores and for internal transport. L: 800, W: 720, H: 1700 (mm). Product: Roll cage. Type: 2-sides. Gedpfx Abox Ahpco Usuk Version: Clamp

Condition: used, * d1=30mm, * d2= 27 mm (wrench size), Gusdpfolkcg Rox Ab Ujk * Total length: 110mm, * Available: 2, Price per piece: €25.00 + VAT.

Condition: used, A used anti-theft roll container is designed for the safe and organized transport of goods in retail, distribution, and logistics environments. Gusdpox Ahn Ssfx Ab Ujk With its generous dimensions of 900 x 730 x 1900 mm and a generous 919-liter capacity, it offers ample capacity, while its sturdy construction ensures optimal protection of valuable products.

Condition: used, * d1=30mm, * d2= 27 mm (wrench size), * Total length: 215mm, * Available: 2 Price per piece: €45.00 + VAT. Gedpfxslkcgie Ab Ueuk

Condition: used, d1: 35 mm d2: 27 mm (wrench size) overall length: 115 mm * Available: 3, Gsdpjlkclgefx Ab Ujuk Price per piece: €25.00 + VAT.