Used Clamp Recording for sale (10,932)

Condition: excellent (used), length 690 mm thread M16 height 1020 mm weight of the machine ca. 360 kg Angle table with breadboard table LxWxD: 1020x690x40 mm Fixing LxW: 330x690 mm Thread: M16 Weight: 360 kg Itedpfx Ahozcgk Te Dek

Condition: used, functionality: fully functional, Year of construction: 2006, load capacity: 900 kg, Cardboard clamp Ijdpfx Aezigt Hsh Dotk Load center: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: ISO 2A (41 cm), Year 2006, Capacity 900 kg, Sideshift, Opening range 480-2200 mm, Clamp length 1100 mm, Clamp height 1000 mm, Width 1600 mm, ID OS1977

Condition: used, Used Enrico Molteni model ED30 stainless steel disperser. Unit is driven by 22kw motor. Has stainless steel mixing pot with clamping section. Includes hydraulic powerpack for raise & lower. Ijdeymaxfopfx Ah Dotk

Condition: ready for operation (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 39951, overall weight: 13,400 kg, Includes linear robot and peripherals. A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. Itedezrd Ruspfx Ah Dek The machine has not been tested but was operational until the end.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,091 h, load capacity: 4,000 kg, lifting height: 3,100 mm, fuel type: diesel, mast type: simplex, construction height: 2,380 mm, power: 55 kW (74.78 HP), fork carriage width: 1,350 mm, fork length: 1,700 mm, empty load weight: 5,935 kg, total length: 3,000 mm, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Load center: 500 Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Transmission: Hydrostatic Speed class: 20 Condition: Like new Technical condition: very good Iodpfxozcr Hgo Ah Djtk Front tire type: Superelastic Front tire size: 250-15 Rear tire type: Superelastic Rear tire size: 250-15 Description: Recorded operating hours. Inspection possible by appointment. Transportation options available. Please contact us if you have any questions. Tel. Clamp fork, side shifter, fork positioning device, 3rd valve, 4th valve, rear work light, front work light, roof cover, windshield, half cabin, heater, solenoid valve, soot filter, STVZO (German Road Traffic Licensing Regulations), full cabin, safety light, interior mirror, exterior mirror, joystick, rotating beacon, windshield wiper, seat heating, LED, seat, air suspension seat

Condition: ready for operation (used), Steel angle / solid Isdpfx Ahjztfbdo Dstk L x W x H 800mm x 710mm x 840mm Thickness 60mm Weight 480 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 1997, operating hours: 113,881 h, functionality: unexamined, machine/vehicle number: 32833, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 11,500 kg, For sale is a used machine from a site closure. Sale is made with the exclusion of any warranty for defects. Isdezl S Rpjpfx Ah Dotk The machine has not been inspected but was in working order until the end.

Condition: used, Used Zeppelin / Henschel Model FM1000 stainless steel high intensity mixer. Approximate capacity: 1,000 litre (product dependent). Stainless steel mixing chamber rated atmospheric pressure at 200°C. External mild steel heating / cooling jacket rated 5 bar pressure at 95°C. Unit includes 3-tier mixing attachment bottom driven by 250 kW, 1490 rpm, 280/660 V, 50/60 Hz motor. Has a top-clamped lid. Includes pneumatically operated discharge valve. Itsdpszun Hfjfx Ah Dsk

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 178759, clamping force: 2,000 kN, screw diameter: 35 mm, installation height: 350 mm, total length: 5,000 mm, total width: 2,200 mm, total height: 3,800 mm, overall weight: 13,000 kg, power: 53.5 kW (72.74 HP), input frequency: 50 Hz, input voltage: 400 V, controller manufacturer: ARBURG, table diameter: 1,500 mm, ARBURG ALLROUNDER 1500 T 2000-350 Injection Molding Machine - Clamping force: max. 85 kN Itodpfozlfmkjx Ah Dsk - Opening force: max. 120 kN - Opening stroke: max. 300 mm - Distance between mold plates: max. 650 mm - Screw travel: max. 145 mm Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach – loaded onto a truck.

Condition: used, length 1000 mm width 1000 mm height 800 mm weight of the machine ca. / t Clamping cube 1000x1000x800 mm Edge distance: 110 mm T-slot spacing: 180 mm Iedpfx Ahszk Riuj Dstk Slot size: 34 mm Thickness: 115 mm Number of slots: 9 2 units available

Condition: good (used), diameter 250 mm amount 1 STK weight 37 kg Pratt Burnerd 6-jaw self-centring chuck (6 Jaw Griptru Scroll Chuck), Ø 250 mm – catalogue number 1260-02505. -->> Special feature of the 6-jaw chuck: Technical data – Specifications Type: 6-jaw self-centring chuck --> Model: l1260-02505 --> Outer diameter: 250 mm Itjdjzupmtjpfx Ah Djk --> Number of jaws: 6 --> Through bore: approx. 75.9 mm --> Centring recess: 200 mm --> Mounting: 3 × M12 on 224 mm bolt circle --> Design: Rear mounting / Plain Back --> Clamping system: Scroll chuck (self-centring) --> About the model number

Condition: used, Year of construction: 2021, UK's Best Selling Automatic Crosscut Saw Built to meet the precise standards of fine joinery while embodying the robust quality of a sawmill, the globally acclaimed TR500 saw unit boasts a distinguished history of over 400 installations in the UK and over 50 years of industry use. A key component within the TR platform, the TR500 stands out with its ever-present 7.5kW saw motor - a consistent feature across the entire Stromab range. Its variable speed cutting cycle allows the precise cutting of softwoods or hardwoods, accommodating dimensions of up to 135mm in height or 360mm in width, all managed by a single top clamping unit. Infeed: The industry standard rack and pinion system featured through the Stromab range allows timber lengths of up to 14m and up to 90kg to be push fed without additional rollers. Featuring a table incline of 8 degrees, automatic lifting pusher system and a positioning accuracy of 0.4mm, the Stromab Matrix powers through your repetitive and bulk cutting requirements. Controller: Harnessing the power of an ELCO Top 12 colour touch screen, cutting lists are simple to programme using the innovative optimisation methods: BASE with board sequence, max length, or sequence. OPTI with base features and volume, minimum waste or priority. Alternatively, use our 'Design2Saw' software to pre-optimise files for the highest yield savings, loaded quickly via USB to reduce operator programming time. Specification Saw Unit: 7.5kw saw motor 500mm diameter saw blade 135mm x 120mm cutting height 360mm x 55mm cutting width Infeed & Outfeed: 90m/min positioning speed 0.4mm positioning accuracy 8 degree incline on table Iedpfx Aszd Uqcoh Dotk Servo driven rack & pinion 1m outfeed table as standard Automatic lifting of pusher arm Controller Elco TOP12 12" industrial touch screen PC 3 optimisation criteria - longest length, sequence & board sequence Fitted with the following options - 6000 mm in feed capacity Pneumatic lifting of pusher 10 hp saw motor Ø500 mm saw blade Opti version with full optimisation and board length reading Defect reading camera ( chalk mark reading )

Condition: used, Technical details: table length: - mm table width: - mm table load: - t width: 1200 mm height: 1600 mm 3pieces available (price per piece) according to DIN 650:nach DIN 650: Itsdjzuzrzspfx Ah Dsk T-Nutenbreite a=27,5; h= 55; b= 49; c= 21 mm; Abstand der T-Nuten 200 mm Spannfläche: B: 1300 x H: 1600 x Dicke: 63 mm Bei Ihrer Anfrage beziehen Sie sich bitte auf die Anzahl der gewünschten Aufspannwinkel. *

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 22-7254, functionality: fully functional, operating hours: 30 h, power: 2.2 kW (2.99 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: AC, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,010 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 3,500 mm, workpiece width (max.): 2,200 mm, workpiece weight (max.): 300 kg, number of axes: 3, number of slots in tool magazine: 1, controller manufacturer: Kinetic-NC, actuation type: electric, total height: 1,900 mm, total length: 3,700 mm, total width: 2,700 mm, overall weight: 1,200 kg, table length: 3,500 mm, table width: 2,200 mm, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, CNC-Step RaptorX-SL 3200/S20 gantry CNC router (2018) – approx. 30 operating hours, production-ready Immediately available CNC gantry router from CNC-Step, built 2018, in as-new condition. The non-resettable hour meter reads only ~30 hours – the machine is practically unused and shows no wear. Originally commissioned by CNC-Step (OEM). Largest standard model of the RaptorX-SL range: travel 3200 × 2010 × 300 mm, clamping area approx. 3.5 × 2.2 m, variable bridge height 150/300/400 mm. Heavy steel frame, Hiwin/Bosch Rexroth linear guides, planetary-geared drive with Benezan BEAST stages – rigidity and repeatability for professional continuous use (furniture/interior fit-out, sign-making, model/prototype work, composites). Fully production-ready, incl.: Itjdpfjzfv T Isx Ah Djk • Teknomotor Ceramic spindle 2.2 kW (18,000–24,000 rpm, ER25, air-cooled) • KinetiC-NC control with unlimited full-version license (transferable) • Vectric VCarve Pro license • PC, monitor, handheld pendant • Extensive tooling package (ER25 collets Ø2–15 mm, solid-carbide cutters, Ø60 Tornado face mill) • 400 V three-phase connection Technical data: • Travel X/Y/Z: 3200 × 2010 × 300 mm • Spindle: Teknomotor Ceramic 2.2 kW, 18,000–24,000 rpm, ER25, air-cooled • VFD: Toshiba VF-nC3 • Drive: stepper motors + planetary gearing, 4× Benezan BEAST • Guides: Hiwin / Bosch Rexroth 20 mm • Control: KinetiC-NC (CncPod, Ethernet) • Power: 400 V three-phase (CEE) · Weight: approx. 1,160 kg • Serial number: 22-7254 Original 2017 invoice available (buyer data anonymized). Base-machine list price: €28,198 net (€33,555.62 incl. German VAT) – excluding spindle and VCarve license. Here fully equipped for a fraction of that. Live demonstration under power by appointment. Collection, dismantling and transport by arrangement. Location: Oploo (NL). Price: €17,000 net (excl. VAT)

Condition: used, Reportedly unused since refurbished Winkworth model 16Z-63 stainless steel z-blade mixer. Mixing trough measures approximately 400mm x 400mm x 350mm deep. All product contact parts in 316/316L stainless steel. Approximate capacity 27 to 36 litre working capacity (product dependent). (2) 316/316L stainless steel z-blades driven by 4kw, 3/50, 1464/37 rpm geared motor. Unit has stainless steel hinged vacuum rated hood/lid with clamps. External 304/304l stainless steel jacket rated 3.5 bar working pressure at 150 deg.c. Unit includes electrically actuated tilt discharge mechanism. Unit includes ICS Cool Energy Ltd model iC220 chiller. Has control panel for mixer and chiller operation. Itodeymazajpfx Ah Dek

Condition: used, functionality: fully functional, overall weight: 2,000 kg, maximum load weight: 9,000 kg, digging bucket width: 1,300 mm, Equipment: gripper hydraulics, hydraulics, We offer this used Verachtert VRG-40 sorting grapple, demolition grapple, stone grapple, grab bucket, and timber grapple. Type: VRG-40 Serial number: 104113 Own weight: 2000 kg Capacity: 9000 kg Machine type: For Verachtert quick coupler CW30/40 with 56cm between the mounting hooks. (Popular quick coupler for many CAT excavators; Verachtert is part of the Caterpillar Group.) Headplate Verachtert CW 40 Excavator size 20-40 tons Width 1300mm, making it a truly large sorting grapple Hydraulic function: 1 Open-Close, 2 Rotation Maximum working pressure (Open-Close): 350 bar Maximum flow (Open-Close): 85 l/min Maximum working pressure (Rotation): 140 bar Maximum flow (Rotation): 40 l/min Volume: 0.9 m³ Pickup in 96231 Bad Staffelstein / Upper Franconia / Northern Bavaria. Itsdpfjzuz Atsx Ah Djk Delivery can be arranged, with reimbursement of expenses. If you have any questions or need more information, please send us a message or call us. We also have a package of Verachtert excavator buckets and a power tilt with a hydraulic Verachtert quick coupler for sale. Check out our other offers!

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 200 mm weight 1549 kg dimensions of the machine ca. 3000 x 1500 mm SIEGMUND Authorized Dealer - All Items in Stock! !! SPECIAL OFFER !! SIEGMUND Retro Welding Table Iodpfxozvq Ems Ah Djtk 3000x1500x200, accessories included SIEGMUND welding table just like 25 years ago with plasma nitriding and modern table legs Product Description - Table dimensions: 3000x1500x200 mm - High-quality S355J2 N steel with plasma nitriding - Material thickness: approx. 24.5-27 mm - Hole diameter: 28 mm - Holes arranged in a 100x100 mm grid - Corners, edges, and holes chamfered at 45° - Side panel height: 200 mm - Holes in side panels arranged in a diagonal grid - Construction reinforced with ribs Plasma-nitrided version: - Protection against rust, scratches, and weld spatter adhesion - Corrosion-resistant / higher load-bearing capacity Specifications: - 28-hole pattern / Dimensions: 3000 x 1500 x 200 mm - Plasma-nitrided version - Includes 6x base feet (standard configuration) - Includes accessory set (see Figure 3): * 8x 280626.N * 12x 280511 * 6x 280410.N * 2x 280420.N * 2x 280422.N * 4x 280110.N * 2x 280152.N * 1x 283999

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 861 0250, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,090 g, total length: 9,000 mm, total width: 4,000 mm, total height: 4,000 mm, overall weight: 20,000 kg, input frequency: 50 Hz, input current: 165 A, controller model: ERGOCONTROL, DEMAG ERGOTECH 420/800-2003 SYSTEM injection molding machine Itjdpfx Aezlfd Neh Dok - Operating voltage: 3 x 400 V - Metering stroke: max. 315 mm - Nozzle stroke: max. 620 mm - Nozzle immersion depth: 45 mm - Includes the manufacturer DEMAG's loading system with a gripper robot and a conveyor belt - Conveyor belt length: 4000 mm - Conveyor belt width: 640 mm - Also includes various spare parts Please note: The item must be picked up between September 8th and 10th, 2026, on a date to be determined. FCA D-63128 Dietzenbach - loaded onto a truck.

Condition: used, functionality: fully functional, total length: 1,000 mm, load capacity: 2,500 kg, Bale Clamp Condition: Ready for use and fully functional Technical Condition: good Description: Bale Clamp / Rotating Clamp – suitable for forklifts Lifting Capacity: 2,500 kg | Condition: good, fully operational Robust bale and rotating clamp designed for professional use in warehousing, recycling, manufacturing, and paper handling. The unit is fully functional, immediately ready for operation, and in good technical and visual condition. Technical Data: Type: Bale clamp / Rotating clamp Capacity: 2,500 kg Length: approx. 1,000 mm Opening width: as specified by device (see photos / inspection) Itodjzpb Huspfx Ah Dek Back width: on request Projection: on request Dead weight: on request Condition: technically good, visually good Location: available immediately Notes: Sale as-is in current used condition. All prices are net plus 19% VAT. Sale exclusively to commercial buyers with valid VAT ID. No warranty or guarantee. Charger note does not apply to attachments, but is systemically retained.

Condition: excellent (used), Year of construction: 2007, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, injection pressure: 1,865 bar, injection weight: 192 g, mold height (min.): 200 mm, ejector stroke: 100 mm, Year of manufacture: 2007 Injection shot weight: 192g Injection unit 410 Screw diameter: 40 mm Specific injection pressure: 1865 bar Injection volume: 217 ccm Injection shot weight: 192 g Screw L/D ratio: 20 Mold closing unit 100 Mold plate dimensions: 600x600 mm Distance between columns: 420x420 mm Ejector force: 35 kN Mold height: 200 mm Ejector stroke: 100 mm Weight: 5000 kg Control system: NC4 Tooling: - 2 x hydraulic core - pneumatic valve Isdpfozt I Rnex Ah Djtk - Euromap 67 connector

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43227, total length: 6,000 mm, total width: 2,000 mm, total height: 2,000 mm, Weight approx. 9000 kg. For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. The machine has not been tested but was in working order until the end. Iodpfxozqapde Ah Detk

Condition: new, functionality: fully functional, empty load weight: 3,200 kg, lifting height: 3,270 mm, Year of construction: 2026, operating hours: 1 h, load capacity: 800 kg, machine/vehicle number: 250815, The machine is new and unused! TECHNICAL DETAILS Lifting height: 3,270 mm Load capacity: 800 kg Bucket capacity: 0.38 m³ MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,706 x 1,570 x 2,480 mm Weight: 3,200 kg Tire size: 31 × 15.5 × 15 Ijdpfx Ahozr D Uyj Dstk Engine manufacturer: Changchai Engine type: ZN390BT-25G Engine power: 18.4 kW Number of cylinders: 3 Fuel type: Diesel Emission standard: Euro 5 Fuel tank: 70 l Recorded operating hours: 1 h EQUIPMENT Quick coupler Lifting lock Cabin with heating Digging bucket with teeth Fabric seat CE certification

Condition: good (used), Year of construction: 2014, functionality: unexamined, machine/vehicle number: 68235-1411-265, overall weight: 1,600 kg, total height: 2,850 mm, total length: 1,415 mm, total width: 1,415 mm, space requirement height: 3,200 mm, type of input current: AC, Equipment: type plate available, We are offering this used Lang Technik Eco Tower 60 automation system, manufactured in 2014. Itsdezvc Rhjpfx Ah Dek Year of manufacture: 11.2014 Serial number: 68235-1411-265 Type: Eco Tower 60 Article number: 68235 in good used condition, consisting of: 1 ECO FEED component placement machine, manufactured in 2014 1 ECO TOWER 60 component placement tower, manufactured in 2014 40 Eco Grip vises, size 77, base body made of steel 20 Eco Grip vises, size 77, base body made of aluminum 4 Eco Grip vises, size 125 1 Vise carriage 1 LANG Quick-Point clamping tower 1 Pneumatic interface between handling system and clamping tower 1 Operating manual and installation guide The automation system is available immediately! Inspection is possible at any time! If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2022, Ref: 11080 . 2022 Horizon CABS 4000-VF EVA Line Excellent Condition! Only 985,000 books produced! 'Computer Aided Binding System' designed for bind-on-demand production. ‘V’ = Variable, book on demand capability ‘F’ = Flap cover feeding capability Comprising: (2020) Tecnograf ‘MettaLibro’ Book block feeder SB-09VF Variable binder with hand feed station and 9 clamps LCD screen operator console for various functions/set-ups ‘PX-Core’ Central control computer system SI-15 book block sensor unit for auto system set-ups & quick book size/thickness make-ready S-09S Automatic feed unit Auto cover score & register settings from data input Milling & roughing station with DB-15 milling blower unit PM-20II EVA hot-melt pre-melt unit MU-09 EVA hot-melt spine glue unit with side glue discs Pile rotary grip cover feeder with double sheet detection LD-09 lay-down delivery belt PP-101 pre-stacking unit with approx. 9m conveyor to; HT-110 Automatic three knife trimmer HC-110 manual feed conveyor to use trimmer as standalone LCD screen operator console for various functions/set-ups Quick book size/thickness make-ready unit Dust bag extraction unit Roller delivery unit Including tools, accessories & manuals. Specification: Binder - book size: Max: 400 x 330mm (manual) Portrait Max: 330 x 250mm (auto) Min: 148 x 105mm Max: 330 x 320mm Landscape Min: 135 x 185mm Iodpey Awcbsfx Ah Djtk Book thickness: 1 - 45mm Open cover size: Max: 400 x 660mm Min: 135 x 220mm Trimmer, book sizes: Max: 330 x 330mm untrimmed Max: 300 x 300mm trimmed Mechanical speed: Max: 4,000 cycles/hr. auto

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 88462-85, feed length X-axis: 30,000 mm, feed length Y-axis: 30,000 mm, feed length Z-axis: 30,000 mm, travel distance X-axis: 760 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 42,000 rpm, total height: 2,700 mm, total width: 3,000 mm, total length: 5,000 mm, table width: 550 mm, table length: 860 mm, overall weight: 7,000 kg, workpiece weight (max.): 800 kg, controller manufacturer: RÖDERS, controller model: RMS 6 VERSION 4.20, positioning accuracy: 0.005 mm, Equipment: documentation/manual, RÖDERS RFM 760/2 HSC Milling Machine Iodpfszlfa Djx Ah Djtk - Includes two EROWA clamping systems - Additional matching accessories - A cooling system and extraction system - Also includes a workbench with fixtures and a 3D measuring probe Note: The machine can be transported on a standard truck! Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach - loaded onto a truck.