Used Swing Clamp for sale (11,313)

Condition: used, Load capacity: 3 t Opening width: 38 mm Iedpfxjb Nwkxj Ag Njih Weight: 15 kg

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -with chain: 1.3 m -Span width: 44 to 70 mm -Load capacity: 6300 kg -Dimensions: 300/460/H120 mm -Weight: 30 kg Iiodpfx Agjd Hb Ims Neh

Condition: used, Panel lifting clamp, sheet metal clamp, sheet metal claw, girder clamp, girder claw, sheet metal gripper, material gripper, material gripper -Sheet metal claw -Span width: up to 152 mm -Load capacity: 2500 kg -Number: 1x terminals available Iodpfx Ajdi Smlog Neih -Price: per piece -Weight: 29 kg/piece

Condition: good (used), Year of construction: 2022, functionality: fully functional, Assembly line for timber frame construction Iodpfx Aoxd Awwjg Noih - framing machine X-Frame - clamping table X-Clamp - automatic working bridge X-Multi - tilting table X-Tilt - clamping table X-Clamp - clamping table X-Clamp - bridge X-Multi

Year of construction: 2007, condition: good (used), Make: HAEUSLER Type: Clamp Year: 2007 Specifications Metric US Standard Min. shell inner diameter 1800 Max. shell inner diameter 5500 Min. shell outside diameter 1500 Max. shell outside diameter 2500 Minimum wall thickness 10 mm Maximium wall thickness 40 mm Max. section weight 15 T Max. weight total workpiece 60 T Dimensions (Estimate) Length Iiedskwcn Eepfx Ag Njh 24000 mm Width 6000 mm Height 3200 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2025, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range Iiodpfjg U Uv Rsx Ag Nsh 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: good (used), functionality: fully functional, Year of construction: 1991, This high-performance swing beam guillotine shear RAS 83.30 with ELGO NC backgauge and pneumatic sheet support unit comes from first ownership. Cutting capacity: 3190 x 2.5 mm Drive power: 5.5 kW Machine weight: 2800 kg Includes pneumatic sheet support unit, ELGO NC backgauge, 1 left-side squaring arm, and 3 additional support arms. Iiedpfjxmi Dpex Ag Nsh Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, - Dimensions: 381x986x1397 mm - Number of clams: 1 Iiedsxpfvmopfx Ag Njh - Smooth surface - Heating plates: 3 zones at the bottom, 2 at the top - Automatic clam lifting - Programmable menus: 32 - Voltage: 380V - Power: 9 kW - Weight: 246 kg - Easy to program and operate - Consistent cooking results - Optimal internal product temperature - Fast and optimized cooking - Easy to clean - Suitable for cooking meat, fish, eggs, chicken and vegetables - Side grease drawers on rails - Program duplication via USB key

Condition: as good as new (ex-display), A manual demonstration bending machine WIEGAND bending length: 1020 mm bending capacity: 2,5 mm max. bending angle: 0 - 135°. segmentation of the upper beam: 270; 200; 150; 100; 75; 50; 45; 40; 35; 30; 25 mm opening width of the upper beam: 45 mm Isdopgmtwjpfx Ag Neih backgauge manually adjustable up to: 540 mm weight: 285 kg

Condition: good (used), Clamping device, clamping tool, clamp bracket, clamp clamp, clamp bracket, pipe clamping system, clamp bracket for roller carriers -Clamping bracket: Clamping bracket clamp for roller carriers -Clamping range: Ø approx. 90 mm, see photos -Number: 3x terminal available -Price: per piece -Dimensions: 375/60/H240 mm Ijdpfxoxhc N Us Ag Neih -Weight: 9.2 kg/piece

Condition: new, carrying capacity 3,0 t number of suction cups 8 suction cup dia. -- Year of construction 2017 - NEW - exhibition machine In contrast to most vacuum systems / lifting systems, the SOLIDswing constructed so that the recorded disk always remains vertical when it is recorded vertically. The plate can without precise positioning of the Suction cups are accommodated and this is independent of the balance Iiedpfxjtv Rhcj Ag Njh Way of working much faster and safer than with conventional manual ones Vacuum systems.

Year of construction: 2022, condition: used, New: No Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 20614 Specifications: 2022 model Iedpfewphgkex Ag Nsih S70 attachment Weight: 1320 kg Max capacity: 10,000 kg Max 250 bar Ready for delivery

Condition: used, Year of construction: 1980, Immediately available ex location: Oscillating guillotine shear RAS, type 82.25, year of manufacture 1980, sheet width 2540 mm, sheet thickness 2 mm, stainless steel 1.25 mm, cutting angle 1.13 degrees, back gauge 5 – 550 mm, drive 3 kW, weight 2 tons. Price: EUR 2,500 plus VAT ex location. Ijdpsxn Ryzjfx Ag Noih

Condition: used, -Dimensions (LxWxH): 965x887x1410 mm -Number of clams: 3 -Smooth surface -Model: C844 -Control panel: electronic -On castors Iisdpfxjxpfuco Ag Noh -Power: 22 kW -Voltage: 380 V -Weight: 390 kg Easy to program and operate -Consistent cooking results -Optimal internal product temperature -Fast and optimized cooking cycles -Easy to clean -Capable of cooking meat, fish, eggs, chicken, and vegetables -Side grease drawers on rails

Condition: as good as new (ex-display), A fully hydraulic demonstration bending machine WIEGAND with NC- 10 control system manual or automatic bending mode Isdpfxspgmqij Ag Noih automatic mode: Close upper beam, bend set angle, open upper beam bending beam or upper beam manually adjustable according to sheet thickness adjustable opening width of upper beam backgauge manually adjustable CE standard documentation bending length: 2500 mm bending capacity: 2,5 mm max. bending angle: 0 - 120°. backgauge manually adjustable min/max: 60/1000 mm power: 3,0 kW weight: 2500 kg Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: good (used), Rear silencer, exhaust system, muffler, silencer, muffler, couplings, pipe coupling, pipe sleeve, pipe connection, exhaust clamp, pipe connector for exhaust system, double clamp Iijdpfjxhcz Rsx Ag Neh -Manufacturer: HJS, pipe connector exhaust clamp stainless steel double clamp 50 x 90 mm -Type: 83122858 -Size: 50/5x54/5x90 -Quantity: 24 x clamp available -Price: per piece, minimum order 3 pieces -Dimensions total: 90/83/62 mm -Weight: 0.6 kg/piece

Condition: used, Mechanical High-Pressure Machine Vice GRESSEL Type MHS 126-3 Iiedpfxsxlkvdo Ag Neh High-pressure clamping device Jaw width: 125 mm Jaw height: 40 mm Opening width: 221 mm Clamping force: 2 / 3 / 4 tons Guideway height: 62 mm - Clamping force adjustable in 3 stages - High-pressure vice with mechanical power amplifier - Clamping range adjustable in 2 stages - Lateral thread for workpiece stop Dimensions: 440 x 140 x 102 mm Weight: 26 kg

Condition: used, functionality: fully functional, 4 pieces of used adjustable wheel clamps for recovery crane, etc., fully functional. No shipping available. Please do not send email inquiries. If you have any questions, we are happy to assist you by phone. Viewing and collection are only possible by prior telephone appointment. Subject to changes, prior sale, and errors. Iedpfxjxnw Tbj Ag Nsih We are a member of the Federal Association of Independent Motor Vehicle Dealers (BVfK) and carry the BVfK quality seal!

Condition: excellent (used), Clamp holder make Comet FG IIII (28396) Iiedpemk E Uiofx Ag Nsh for Comet threaded steel FG IIII TR 12

Condition: used, -Dimensions LxWxH: 1024x986x1397 mm -Number of clamshells: 3 -Smooth surface -Heating plates: 9 zones at the bottom, 6 at the top -Automatic clamshell lifting -Programmable menus: 32 -Voltage: 380V -Power: 22 kW -Weight: 395 kg Iiedsxpfp Hspfx Ag Nsh -Easy to program and operate -Consistent cooking results -Optimal internal product temperature -Fast and optimized cooking -Easy cleaning -Suitable for cooking meat, fish, eggs, chicken, and vegetables -Side grease drawers on rails -Program duplication via USB key

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 2,500 kg, empty load weight: 1,227 kg, total length: 1,500 mm, construction width: 1,130 mm, opening width: 1,860 mm, Cellulose/bale clamp Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Technical condition: very good Iiodpfx Agju D S Tio Neh Description: Rotation range 360° Opening range 560-1860 Arm height 900mm Arm length 1150mm

Condition: good (used), Year of construction: 2003, functionality: fully functional, - Cutting range 90° round/flat: 335 / 500x335 mm - Mitre right 45° round/flat: 330 mm / 320x335 mm - Mitre right 30° round/flat: 200 mm / 200x335 mm - Mitre range 90° to 30° - Bundle clamping width/height: 0-500 mm / 15-335 mm - Material feed single/multiple: 0-600 mm / 0-9999 mm - Remnant length manual/automatic: approx. 70 mm / approx. 110 mm - Cutting speed: 15 - 150 m/min - Cutting pressure: stepless hydraulic adjustment - Saw blade dimensions: 4400 x 34 x 1.1 mm Iijdpexg Hr Dofx Ag Noh - Power supply: 3x 400 V / N / PE / 50 Hz - Nominal current: 16 A - Machine weight: approx. 1700 kg - Machine dimensions W x H x D: approx. 2500 x 1900 x 2300 mm

Year of construction: 2022, condition: used, New: Yes Field of application: Internal logistics Empty weight: 100 kg Part suitable for: machines Type number: 536-7292, 557-5899, 584-2652 Iodpfx Asxip Dzeg Noih CAT320 Source swing rotor Caterpillar OEM : 536-7292, 557-5899, 584-2652 Article nr.: S478013001N-veiling Source swing rotor Caterpillar

Condition: excellent (used), Pneumatic power clamp Make DESTACO type 82L 3G-251C8HO used from machine dismantling length 200 mm width 35 mm height 75 mm 2 x available Iodpfjq Evraox Ag Nsih

Condition: used, functionality: fully functional, Year of construction: 2015, load capacity: 1,400 kg, empty load weight: 285 kg, construction width: 1,050 mm, opening width: 1,710 mm, Cardboard clamp Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: very good Iedpfx Agou D S Igo Njih Description: In addition to this device, we offer other forklifts and warehouse technology devices. Our devices are workshop and FEM4.004 tested. Please contact us by e-mail or by phone. You can also find us at hsr-gabelstapler Of course, we also buy your used truck, even without you purchasing a vehicle from us. Installment plan & financing on favorable terms are available on request. We will be happy to advise you competently and in detail about our vehicles.