Used Clothes Machine for sale (64,782)

Condition: good (used), Year of construction: 1986, functionality: fully functional, Machine Name - Benelli 1000 Tonne press Machine Model - Automatic transfer press PMT/3d/1000/5/1000P Y.O.M 1986 (Retro-fitted 2015 by Helm) Gedpfxoz Nhx As Al Djuh Description - 1000 ton SPM up to 26 Number of operational positions: 5 Press bed 5000mm x 2000mm Main carriage 5100mm x 1400mm second carriage Lateral opening between columns: 2500 mm Voltage power supply: 415V; 50 Hz Shut height range 730mm- 1070 Light guards Schlechier decolier : Coils up to 10ton and 1.2m wide, ID 500mm OD 1500mm Can be seen underpower from site.

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m Gsdpey Nd Siefx Al Dsuh With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes. Godpfx Alszg D I Aj Dsuh

Condition: repair required (used), functionality: limited functionality, Year of construction: 2017, machine/vehicle number: 2219, laser type: fiber laser, working length: 3,000 mm, working width: 1,500 mm, travel distance Z-axis: 120 mm, No minimum price – guaranteed sale to the highest bidder! The machine will be dismantled at the end of week 42. TECHNICAL DETAILS Laser type: Fiber laser Laser source manufacturer: IPG Laser source model: YLS-4000-CUT Laser source power: 4 kW Currently available cutting power: 2 kW Working area: 3,000 × 1,500 mm Z-axis travel: 120 mm Number of pallets: 2 MACHINE DETAILS Control system type: CNC control Level of automation: Automatic Type of operation: Electric Machine dimensions: approx. 4,000 × 8,000 mm Gjdpsz N Dutofx Al Douh EQUIPMENT 2-pallet changing table Note: Modules 1, 4, and 5 automatically lock after cutting and must be unlocked by IPG. The currently available cutting power is 2 kW.

Condition: excellent (used), Year of construction: 2020, Traverses X Y Z: 500 x 450 x 400mm, Table size 500 x 630mm, C axis 360, B Axis -5 / +110°, maximum workpiece diameter 630mm, maximum workpiece height 550mm table load 200kgs, Spindle taper BT40, 19kW Spindle Motor, Spindle Speed 12,000rpm, Gedpfx Alez R Nv Hs Douh Heidenhain Control, 30 Station ATC, spindle probe, Swarf conveyor, through spindle coolant

Condition: ready for operation (used), For sale: SHAANXI MACHINE TOOL WORKS M1432A universal cylindrical grinder, 1000 mm center distance. Technical specifications: Manufacturer: Shaanxi Machine Tool Works Type/Model: M1432A Center distance: 1000 mm Max. grinding diameter: 320 mm Center height: 180 mm External and internal grinding Power supply: 380 V / 3 phases / 50 Hz Connected power: 8 kVA Protection: 35 A Machine number: 177 Weight: approx. 5300 kg Operational. Ready for use. Guedpfx Aljz Hu Dlj Dsh The price listed in the advertisement is the net price, to which VAT must be added. The machine can be viewed in Starachowice at ul. Kwiatkowskiego 13. Contact by phone from 7:00 AM to 3:00 PM.

Condition: used, machine/vehicle number: 008659, X axis working area: 3000 mm Y axis working area: 900 mm Main Electrospindle power: 5.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 18 Gujdpfx Alszvwnhs Deh

Condition: used, Year of construction: 1989, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 5399 195, type of input current: three-phase, total length: 6,830 mm, total height: 1,490 mm, total width: 1,400 mm, feed length X-axis: 80 mm, feed length Y-axis: 20 mm, feed length Z-axis: 80 mm, input voltage: 400 V, overall weight: 2,100 kg, compressed air connection: 60 bar, air demand: 60 m³/h, input current: 63 A, year of last overhaul: 2020, sheet thickness aluminum (max.): 40 mm, air pressure: 60 bar, power: 6 kW (8.16 HP), product height (max.): 100 mm, product height (min.): 70 mm, product length (max.): 135 mm, product length (min.): 110 mm, SL80 Bradman Machine – Used & Fully Functional SL80 Bradman machine for sale. The machine is used but in good working condition and is fully functional. It has been well maintained and is ready for use. Selling due to no longer being required. Buyer is welcome to inspect the machine before purchase. Godjzx Ehzspfx Al Douh Please get in touch for more information or additional photos.

Condition: excellent (used), Dahlih MCV 1020 Vertical Machining Centre Specification Table Working surface 1250 x 660mm T slot (size x number) 18 x 5mm Max Table load 1000kgs Travel X Travel 1020mm Y Travel 550mm Z Travel 560mm Distance of spindle end to table top 150- 710mm Distance of spindle centre to column surgface 600mm Spindle Spindle Nose NT40 Spindle speed 8000/10000 RPM - TBC Feed Guedpfx Aloz R A Une Djh Cutting Feed 1-10000 mm/min Rapid travel 20000 mm/min Min. Input Increment 0.001 ATC Toolholder BT40 Dimensions - 4500 x 3640mm Weight 6000kgs

Year of construction: 2024, condition: new, We are offering this new Machine Wala Enterprise MSA-2 double-die semi-automatic paper plate making machine, manufactured in 2024. Gujdpfez E Damox Al Djh Manufacturer: Machine Wala Enterprise Model: MSA-2 Year of Manufacture: 2024 Condition: New Category ID: 691 Type: Double-die semi-automatic paper plate making machine If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2012, operating hours: 99,097 h, working height: 45 mm, power: 6.5 kW (8.84 HP), working length: 2,600 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum working length: 2,600 mm Maximum working height: 45 mm MACHINE DETAILS Guedpfxoz Ekhde Al Doh Installed total power: 6.5 kW Operating hours (according to the meter): 99,097 h The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6063

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm Guedezf Nk Tjpfx Al Dsh • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: new, Year of construction: 2025, Technical Specifications: Laser Power: 2kW Laser Type: Continuous Fiber Laser Laser Source: MAX Adjustable Cleaning Length: 0 – 300 mm Approximate Cleaning Speed: 10 – 60 m2/hour Laser Wavelength: 1070 nm Output Power Stability: ± 2% Laser Cooling System: Included (with antifreeze) Power Supply: 220V 50Hz Machine Power: ≤ 9.5kW Operating Environment Temperature: 10 – 40°C Gujdpszkkc Usfx Al Doh Operating Environment Humidity: < 70% (No condensation) Laser Head Cable Length: 10 m Machine Dimensions (L x W x H): 1,000 x 650 x 950 mm Weight: 230 kg CE Certification: Included

Condition: used, machine/vehicle number: 008562, X axis working area: 2465 mm Y axis working area: 1260 mm Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Guedpfx Aezvwiljl Doh Total number of drilling spindles: 10 Total number of tool changer positions: 16

Condition: used, machine/vehicle number: 008507, X axis working area: 5020 mm Y axis working area: 1380 mm Guodjzvwnbjpfx Al Djh Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Total number of tool changer positions: 16

Condition: used, machine/vehicle number: 008564, X axis working area: 2465 mm Y axis working area: 1260 mm Gjdpozvwh Iefx Al Djuh Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 16

Condition: good (used), Year of construction: 2011, XYZ: 760 x 610 x 610mm, Table 900 x 600mm, 21kW, Heidenhain TNC530, 12000 rpm, 30 station ATC, BT40 taper, Guedpfx Aljz Rz Nqo Deh swarf conveyor, through spindle coolant,

Condition: good (used), 1 x Powder Packing Machine/Powder Depositor Guodjyt H Aqjpfx Al Dsh Model: AF-PP5 Range of pack: 1-1.5kg With weigher

Year of construction: 1997, condition: used, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania Guedpfx Aoza T A Rel Djh The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: excellent (used), Year of construction: 2015, Various Stainless Steel Conveyors & Packing Stations 1. Low level belt conveyor, Fully Stainless Steel, Belt Dimensions - 1000mm L x 400mm W, Height adjustable feet, Complete with motor. gearbox Stop / Start Isolator, Box alignment side guide Gsdpfx Alstqdq Ss Douh 2. Incline Belt Conveyor, Stainless Steel Frame, Belt Dimensions 2500mm L x 400mm W. Infeed height 500mm, Outfeed height 1350mm 3. High Level Box Collation Conveyor, Gravity Roller Conveyor for Box Collation, Dimensions 2500mm L x 400mm W x 1400mm H, Height adjustable legs / feet 4. Packing Station Conveyor, All stainless steel, Two Packing tables - dimensions 760mm L x 400mm W each, Conveyor dimensions - 2000mm L x 400mm W, Height adjustable feet, Adjustable box aligner / guide 5. Driven Roller Conveyor Stainless Steel, Dimensions - 2200mm L x 400mm W rollers, With top box closer adjustable plate, 2200mm L, Fully stainless steel, Complete with motor, gearbox, Stop / Start Isolator. 6. Gravity Roller Flexi Conveyor, Closed Dimensions 960mm L x 300mm W, Fully open 3200mm L, Height adjustable legs 7. Stainless steel conveyor with a food grade flat belt, 4000mm L x 350mm wide belt 8. More conveyors - call us for details

Year of construction: 2021, condition: new, Derryglan Ltd - Bagging Systems offer exceptionally reliable, cost-effective bagging solutions. We offer a range of semi-automatic & automated bagging machines for many applications. We offer a full range of accessories to suit your requirements and application. With body material available in painted mild steel or stainless steel. Guodpfxegq N Axj Al Deh The T-1000 Advanced Poly-Bagger is our 'top-of-the-line bagger'. It is no wonder the T-1000 is also our best-selling machine! Designed for long or short runs, the T-1000 has the capability of cycling over 60 bags per minute, faster than any operator could manually feed. The T-1000 is also fast enough to keep up with automatic infeed equipment including vibratory bowl counters, scales and infeed conveyors. The T-1000 Advanced Poly-Bagger is also designed to run inline with punch/stamp presses, injection mould machines, blister machines and other continuous feed manufacturing equipment for inline bagging.

Condition: ready for operation (used), Quin Systems PTSM322 Mini Machine Manager, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Gjdpfx Alei Ecl Dj Djuh

Condition: used, This listing is for a IBICO Ibimaster 300 Multifunctional Comb Binding Machine The unit is in full working condition and is ready for immediate release. Specifications & Features It’s a multi‑functional binding machine that can both punch and bind documents. Canterbury Used Office Furniture Punching capacity: 21‑hole: ~ 20 sheets of 80 gsm paper at once 4‑hole (for e.g. 4‑hole filing): up to ~ 30 sheets Binding capacity: Up to ~ 500 sheets (80 gsm) using a 51 mm plastic comb Maximum punching width: ~ 315 mm (fits A4 / A5 width) Gsdpfx Aoxv Ackol Douh Dimensions & weight (from used listing): ~ 425 × 125 × 425 mm, weight ~ 10.8 kg It supports simultaneous punching and binding thanks to its combined design

Condition: used, Year of construction: 2001, This machine is fitted with a new Siemens PLC and touch panel. Technical specifications: - Manufacturer: Unisanding - Model: 2.2.0. 0-30 - Working width: 1300 mm - Year of manufacture: 2001, retrofitted in 2025 - 2 rollers, flexibly adjustable from 0–30°, operating from above - Flex-Trim special brushes - Vacuum belt with vacuum motor - With glass panel on the operator side - Sanding motors: 2 × 2.2 kW with thermal cut-out - Feed motor: 1 × 1.5 kW with thermal cut-out - Vacuum motor: 1 × 5.5 kW - Roller height adjustment axis: 1 × 0.18 kW - Feed speed: 2–10 m/min, frequency-controlled - Brush speed: 50–350 rpm, frequency-controlled - Voltage: 3 x 400 V, 50 Hz - Electrical power rating: 15 kW - Fuse: 63 A - Exhaust air volume (vacuum): 3,000 m³/h - Dust extraction volume: 5,000 m³/h (to be provided by the customer) - Length: 2,170 mm - Width: 2,040 mm Guodpfx Alsxtakmo Doh - Height: 2,030 mm - Weight including control cabinet: 2,220 kg - Colour: RAL 7035 light grey/black - Operating side: left/right - Brush replacement side: right - Explosion-proof version: No - Location: at the Blomberg warehouse

Condition: used, This listing is for a Quickpouch Automated Form-Fill Seal Packaging Machine with Videojet Dataflex Printer for Quickpouch Auto loader. Gusdpfxoxzg Hqs Al Doh Manuals are available on request.