Used Cnc Laser Cutting Machine for sale (67,039)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, laser power: 3,200 W, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, No minimum price – guaranteed sale to the highest bidder! Includes SheetMaster, ToolMaster, GripMaster! Fpedpfx Aj Ahhi Ujanep TECHNICAL DETAILS Laser power: 3,200 W Laser type: CO₂ laser TruFlow 3200 Working area combined punching/laser: 3,000 × 1,500 mm Working area punching operation: 3,000 × 1,500 mm Working area laser operation: 3,000 × 1,500 mm Max. sheet thickness mild steel: max. 8 mm Max. sheet thickness stainless steel: max. 8 mm Max. sheet thickness aluminum: max. 4 mm Max. punching force: max. 220 kN Max. punching rate with E = 1 mm: max. 900/min Max. marking rate: max. approx. 2,800/min Max. number of multi-tools with 3 tool holders: max. 18 Tool capacity: 180 tools Max. axis speed X/Y simultaneous: max. 108 m/min EQUIPMENT SheetMaster ToolMaster GripMaster Working area without repositioning in large format Linear magazine with multi-tools SheetMaster with two large-format tables Automatic scrap sheet disposal on lifting table

Condition: good (used), Year of construction: 2012, operating hours: 43,313 h, controller model: Siemens Sinumerik 840 D, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 5,000 watts Working area: 3,000 × 1,500 × 115 mm Max. sheet thickness, steel: 25 mm Max. sheet thickness, stainless steel: 20 mm Max. sheet thickness, aluminum: 20 mm Max. speed: 235 m/min Accuracy: 0.10 mm MACHINE DETAILS Control model: Siemens Sinumerik 840 D Operating hours: 66,934 h / 43,313 h Dimensions & Weight Fsdpfxo Ah Rl Uj Aanepp Dimensions (L x W x H): 8,300 x 4,800 x 2,400 mm Weight: 12,000 kg EQUIPMENT Solid-state laser TruDisk 5001 with one LLK output Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Universal cutting head with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet edge detection

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2011, operating hours: 27,693 h, laser power: 3,000 W, Equipment: cooling unit, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 3,000 W Round tube diameter: min. 16 mm Round tube diameter: max. 225 mm Square tube dimensions: max. 160 × 160 mm Rectangular tube dimensions: max. 200 × 100 mm MACHINE DETAILS Loading and unloading Loading length: 6,500 mm Fede Air Hyspfx Aanspp Unloading length: 6,500 mm Operating hours: 27,693 h EQUIPMENT Automatic rear loading Automatic unloading system Fiber laser technology Specialized software solutions

Condition: refurbished (used), functionality: fully functional, Year of construction: 2014, operating hours: 20,000 h, laser source model: ROFIN DC 020, laser power: 2,000 W, working length: 6,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Fsdpfx As Air Idsanopp Processing length: min. 3,200 mm Processing length: max. 6,500 mm Round tube diameter: min. 12 mm Round tube diameter: max. 120 mm Square tube dimensions: min. 12 × 12 mm Square tube dimensions: max. 100 × 100 mm Rectangular and oval tube dimensions: min. 10 × 12 mm Rectangular and oval tube dimensions: max. 120 × 70 mm Laser power: max. 2 kW MACHINE DETAILS Loading and unloading Loading length: 6,500 mm Unloading length: 4,500 mm Load capacity of the bundle loader: 4,000 kg Number of digitally controlled axes: 6 Laser source: ROFIN DC 020 Operating hours: 20,000 h EQUIPMENT Automatic bundle loading system Unloading system ROFIN DC 020 laser source Cooling unit (chiller) Extraction system LT120 Optical weld seam tracking system LT120 Integrated micro-dosing system

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 12,000 W, working length: 2,030 mm, working width: 4,020 mm, power: 12,000 kW (16,315.44 HP), type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, X-Axis Travel(mm）: 2050 Y-Axis Travel(mm）: 4050 Z-Axis Travel(mm) ：270 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 170m/min Maximum Acceleration: 2.5G Fpjdpfx Aewxaq Tjansp

Condition: used, Year of construction: 2007, 2007 Amada LC3015 XI NT, Co2 Laser Cutting Machine with CNC Control with Stacker, Donaldson Torit DCE Dust Collector & Riedel Chiller Fpsdpoz E R Idsfx Aansp Comprising: Amada LC3015 XI NT Laser Cutting Machine. 'X' Axis 3,100mm x 'Y' Axis 1,550mm x 'Z' Axis 120mm. Sheet Size 3,000mm x 1,500mm, Max 20mm Thick. Max Weight 730kg. 40CFX, 4,000 Watt Co2 Laser Resonator. Automatic Pallet Changer. BWS Transformer. Operating Terminal Beiyer E700 Stand Alone Control. Riedel Stand Alone PC 1001.1MS5.1 Chiller (2007). LKI, AS LUL 300XI Automated Compact Storage, Loading & Unloading Tower System (S/No. 1294) (2006). Sheet Size Max 3,000mm x 1,500mm, Minimum 2,000mm x 1,000mm, Thickness Max/Min 20mm/0.5mm. Mitsubishi Q Series PLC. (2) Sick MSLE03-24011 Beam Sensors. Donaldson Torit DCE Stand Alone Dust Extractor with Donaldson TCB Total Control Board. Weight of Laser Cutting Machine Approx 10,500kg. Dimensions Approx 6,500mm x 3,200mm x 2,100mm. Weight of Stacker Approx 11,000kg. Dimensions Approx 4,450mm x 2,700mm x 4,860mm High. Dimensions of Dust Extractor Approx 1,500mm x 1,400mm x 3,200mm High. Dimensions of Chiller Approx 2,860mm x 1,130mm x 2,000mm High. Power Supply 415 Volt, 3 Phase. Viewing Recommended. Please Note Technical Details of Stacker Shown within the Pictures.

Year of construction: 2010, condition: ready for operation (used), A CO2 laser cutting and marking machine Eurolaser, which was used for acrylic glass, is available. Laser power: 200W, working dimensions X/Y: 2270mm/1600mm, max. cutting width: 2200mm, material feed width: 2350mm, table feed-through height range: 58mm-80mm, engraving resolution: 1200dpi, grayscale levels: 256, material processing: films/textiles/plastics/composite materials/paper/thin wood. Machine dimensions X/Y/Z: approx. 4000mm/2350mm/1600mm, weight: approx. 2000kg. The laser source was renewed in 2017. Documentation available. An on-site inspection is possible. Fpsdpfx Aaeyviyronsp

Year of construction: 2017, condition: ready for operation (used), A Trumpf CNC 2D solid-state laser cutting machine is available. Laser source: Trumpf TruDisk 4001, laser power: 4kW, wavelength: 1030nm, working dimensions X/Y: 3000mm/1500mm, Z-axis travel: 75mm, max. workpiece weight: 900kg, max. simultaneous traverse speed: 140m/min, max. mild steel thickness: 25mm, pallet changers: 2. Machine dimensions X/Y/Z: approx. 8300mm/6800mm/2300mm, weight: approx. 7750kg. Documentation available. An on-site inspection is possible. Expected to be available starting 2027. Fpodjzk Nbcjpfx Aanep

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 16,275 h, Control SINUMERIK 840D SL Laser source TruDisk 3001 Laser power 3,000 W (3 kW) X-axis travel 3,000 mm Y-axis travel 1,500 mm Z-axis travel 115 mm Max. axis speed X / Y / Z 100 / 100 / 100 m/min Max. simultaneous speed X-Y 245 m/min Max. sheet thickness – mild steel 20 mm Max. sheet thickness – stainless steel 15 mm Max. sheet thickness – aluminum 15 mm Max. sheet thickness – copper 4 mm Fpedpfj Af U Hqex Aanjp Max. workpiece weight 900 kg Transport width 2,980 mm Machine weight 12,000 kg Connected electrical load 37 kVA Compressed air 6 bar Dimensions (L × W × H) 9,400 × 5,100 × 2 400 mm Accessories, Standard Equipment • Automatic pallet changer • Enclosed work area • Chiller unit (or Cooling unit) • Integrated electrical cabinet (or Control cabinet) • Conveyor belt • Work area lighting • Positioning laser diode • Spraying device • FocusLine • NitroLine • PlasmaLine • Automatic nozzle cleaning • Cutting head and adaptive lens system • 17-inch touchscreen • FastLine • Teleservice • USB • CE marking • Light barriers (or Safety light curtains) • Monitoring system Optional Equipment • Automatic nozzle changer • Drop&Cut • Dot Matrix Code The machine is in good working order and can be seen under power after making an appointment.

Year of construction: 2008, condition: used, Laser power: 4000W, power supply: 400V/50Hz, control voltage: 24V DC, required fuse rating: 3x160A, compressed air connection: 7-10bar, nitrogen connection (N₂): 30bar, oxygen connection (O₂): 20bar, connected load: 88kVA, operating hours: approx. 46,000h. An on-site inspection is possible. Fpedpfx Aj Ah Tyqeanep

Condition: used, Year of construction: 2006, A CNC laser cutting machine with a 5kW CO₂ laser and automatic loading and unloading system is offered. Working area X/Y/Z: 4000mm/2000mm/115mm. Laser power: 5000W. Laser unit: CO₂ laser TLF 5000. Max. sheet thickness mild steel: 25mm. Max. sheet thickness stainless steel: 20mm. Max. sheet thickness aluminum: 15mm. Operating hours: Laser-on hours: 39625h. Beam-on hours: 14346h. Control: Siemens Sinumerik 840D. The system is equipped with an automatic loading system that supports sheet metal handling. Inspection possible by prior arrangement. Fedpfsz Sr Nkex Aanepp

Condition: good (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: P2060, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser source manufacturer: RAYCUS, laser source model: fiberlaser, laser power: 3,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, workpiece weight (max.): 27 kg, input voltage: 380 V, input frequency: 60 Hz, type of input current: three-phase, type of cooling: water, overall weight: 12,000 kg, total length: 12,000 mm, total width: 5,000 mm, total height: 5,000 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Fiber laser tube cutting machine Golden Laser P2060A-3D 3000 W for sale. The machine is in daily production use, fully functional, and can be inspected while powered on. Main configuration: Laser source: Raycus 3,000 W fiber laser Cutting head: 3D 5-axis bevel cutting head with auto focus CNC control and software: PA (Germany) Nesting software: Lantek (Spain) Servo motors: Yaskawa (Japan) Reducers: APEX (Taiwan); gears and rack: alpha (Germany) Linear guides: HIWIN (Taiwan) Proportional valve: SMC (Japan) Main electrical parts: Schneider (France) Chiller: Tongfei Automatic bundle loader (load size 800 x 800 x 6,000 mm) Automatic unloading / collecting device (max. collecting length 3,000 mm) Pneumatic double chucks with auto-centering Floating support system and floating rear material support Fjdpfx Aas Afwzwjnjpp Weld seam recognition camera (round and rectangular tubes) Automatic lubrication Dust extraction unit / air dust dryer 5.5 kW Technical data: Tube diameter range: 20–200 mm Max. tube length: 6,000 mm Tube types: round, square, rectangular, oval, obround, H, angle, I and irregular profiles Max. tube weight: 37 kg/m Remnant length: 50–80 mm (Ø < 100 mm), 180–200 mm (Ø ≥ 100 mm) X/Y positioning speed: 95 m/min X/Y acceleration: 1.5 G Chuck rotation speed: 160 rpm Positioning accuracy: ±0.03 mm Axis travel: X 7,180 mm / Y 250 mm / Z 125 mm Axis motor power: X 3 kW, Y 2 kW, Z 2 kW Machine power: 30 kW, 380 V AC, 50/60 Hz Machine weight: approx. 12 t Footprint: approx. 12 x 5.5 m Year of manufacture: 2022 Location: Slovenia Inspection and test cutting possible by appointment.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, cutting speed: 8,500 mm/min, workpiece weight (max.): 200 kg, input voltage: 380 V, input frequency: 50 Hz, overall weight: 4,500 kg, total length: 11,380 mm, total width: 2,500 mm, Equipment: CE marking, centralized greasing system, cooling unit, emergency stop, fume extraction, nozzle changer, safety light barrier, 2 Chuck Professional Pipe Laser Cutting Machine Max length of pipe: 6000mm*φ240mm Repeat positioning accuracy: ≤0.03mm Positioning accuracy: ≤0.05mm Max positioning speed: 85m/min Max acceleration: 1.0G Max rotating speed of chuck: 100r/min Round pipe: Φ10mm-Φ220mm Square pipe: 10mm*10mm ~ 150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flat oval tube: Short axis≥15mm, long axis≤210mm Channel steel: Max 20# I-beam: Max 18# H steel: Max 175*90mm High-quality chuck 1)High clamping accuracy; 2)Sealed and dustproof; Fjdpfsv Hkmvsx Aanspp 3)Various types of pipes can be clamped; 4)Low failure rate; High-strength cage structure welded bed, high temperature annealing, gantry milling processing, anti-vibration, anti-torsion and anti-deformation; Professional industrial computer, resistant to high temperature and dust; Dust removal Hollow rear chuck, dust is removed from the inside of the pipe, the dust removal effect is good, meet the requirements of environmental protection; Short tail function Support two kinds of short tail functions: rear chuck inserted short tail, front chuck movable short tail; Ensure that workpieces & pipes can achieve short tails, reducing material waste.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Fodpfxszg D I Aj Aanjpp NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Year of construction: 2010, condition: ready for operation (used), A CNC laser cutting machine Amada is available. Laser type: CO2, laser power: 4kW, connected load: 43kVA, max. sheet dimensions: 1500mm/3000mm, max. sheet thickness steel/stainless steel: 10mm/12mm, control system: Fanuc, power-on hours: 34401h, operating hours: 21713h, cutting hours: 11111h. Including loader and unloader. Documentation available. An on-site inspection is possible. Fedpezkldyofx Aanjpp

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, laser power: 12,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, pipe diameter (max.): 550 mm, pipe length (max.): 12,000 mm, working length: 12,000 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, ACME Tube and Profile Laser System – 3-Chuck System with 45° Laser Head The ACME tube and profile laser system is a powerful CNC fiber laser cutting machine designed for high-precision processing of tubes and profiles across a wide range of sizes and applications. Technical Features and Specifications 3-Chuck System (all chucks traversable) For maximum flexibility, precise material handling, and virtually waste-free production (zero-tail cutting). Vertical linear guides Robust machine construction ensures high stability, accuracy, and vibration damping, even with large workpieces. Processing Diameters (optionally available): Ø 280 mm Ø 360 mm Ø 550 mm Laser Power Options: 3 kW 6 kW 12 kW Maximum Processing Length: Up to 12,000 mm (12 meters) for long stock and industrial applications 45° Laser Cutting Head Enables miter cuts and complex cutting geometries without additional post-processing. Automation & Material Handling Semi-automatic loading and unloading system Efficient material infeed and removal to minimize setup times and manual intervention. Integrated small parts conveyor Clean separation and automatic discharge of finished parts and remnants. Quality & Safety Components from renowned international manufacturers High-quality laser sources and cutting heads from Max Photonics and Boci CE-compliant machine design in accordance with EU machinery directives Key Advantages at a Glance High precision for complex tube and profile geometries Efficient production through semi-automatic handling Flexible configuration for various material diameters and power options Fpjdpfx Aaozl Dgvenep Reduced material waste through optimized chuck technology

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 480 h, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser source model: MFMC-6000W_ Pro-BKW1.0, laser hours: 480 h, laser power: 6,000 W, laser wavelength: 1,000 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, table length: 3,106 mm, table width: 1,582 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, workpiece weight (max.): 900 kg, input voltage: 400 V, input current: 33 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 11,800 kg, total length: 1,560 mm, total width: 5,900 mm, total height: 2,745 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, 2023 DNE LC3 3015 6kW Fibre Laser Cutting Machine - FAST SALE WANTED Used 2023 DNE LC3 3015 6kW CNC Fibre Laser Cutting Machine for Sale – 3000 x 1500mm – MAX Photonics 6000W Laser Source – Pallet Change Table Machine Manufacturer: DNE Model: LC 3 6000 Machine Type: Fiber Laser Cutting Machine Capacity: 3000 x 1500mm Year: 2023 Control: CNC Condition: Excellent Condition Price: Includes Decommissioning & Loading Built as part of the DNE/Bystronic fibre laser range, the LC3 combines high cutting speeds, straightforward operation and relatively low running costs compared with traditional CO2 laser cutting systems. Main Specifications Manufacturer: DNE Model: LC3 3015 Year: 2023 Machine Type: CNC Fibre Laser Cutting Machine Laser Power: 6kW / 6,000W Laser Source: MAX Photonics Fibre Laser Nominal Sheet Size: 3,000 x 1,500mm Approx. Cutting Area: 3,106 x 1,582mm Z-Axis Travel: Approx. 100mm Maximum Sheet Weight: Approx. 900kg Laser Source The machine is fitted with a: MAX Photonics 6kW / 6000W Fibre Laser Source MAX Photonics fibre laser technology is widely used in industrial sheet-metal cutting applications and offers efficient cutting with relatively low maintenance requirements. The 6kW power level provides a good balance between high-speed thin-sheet cutting and the ability to process heavier plate. Approximate Cutting Capacities Depending on material grade, assist gas, nozzle arrangement and cutting parameters, published capacities for the 6kW LC3 include approximately: Mild Steel: Up to 20mm Stainless Steel: Up to 20mm Aluminium: Up to 20mm Brass: Up to 10mm Copper: Up to 10mm Actual production cutting capacity, speed and edge quality will depend on the material specification and cutting parameters being used. Fpjdpoz D D N Esfx Aanjp Machine Performance Maximum X/Y Positioning Speed: Approx. 100m/min Maximum Simultaneous Positioning Speed: Approx. 140m/min Position Repeatability: Approx. 0.05mm Average Bilateral Position Deviation: Approx. 0.10mm Edge Detection Accuracy: Approx. ±0.5mm These characteristics make the LC3 suitable for both high-speed thin-sheet work and general production fabrication. Shuttle / Pallet Table System The DNE LC3 is designed with a sheet handling arrangement intended to minimise non-cutting time between jobs. Approximate Table Change Time: 24 seconds The rapid table exchange system allows the next sheet to be prepared while the machine is cutting, improving overall machine utilisation. Approximate Machine Dimensions Overall Length: Approx. 10,561mm Overall Width: Approx. 5,903mm Overall Height: Approx. 2,744mm Approximate Machine Weight: 11,800kg Transport dimensions and lifting requirements should be confirmed prior to collection. Please Note All specifications, cutting capacities, dimensions, weights and machine details quoted above are approximate and are provided for guidance only. Actual cutting performance will depend on material grade, assist gas, nozzle configuration, machine condition and cutting parameters. Prospective purchasers should verify all important specifications and operating requirements prior to purchase.

Year of construction: 2008, condition: ready for operation (used), A CNC laser cutting system Trumpf including RotoLas and Liftmaster is available. Laser source: TruFlow 5000, laser type: CO2 laser, laser power: 5000W, travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness structural steel/stainless steel/aluminium: 25mm/25mm/15mm, positioning accuracy: +/-0.1mm, repeatability: +/-0.03mm, max. axis speed: 200m/min, max. simultaneous speed: 300m/min. Machine dimensions X/Y/Z: approx. 11100mm/4600mm/2400mm, weight: approx. 12000kg, operating hours: 55462h, laser hours: 24430h, beam hours: 12742h. Hours status as of 01/2026. Documentation available. On-site inspection is possible. Expected to be available from January 2027. Fpodpfx Asx Tumxsanjp

Year of construction: 2025, condition: new, functionality: fully functional, High Speed · High Precision · High Stability The VS series high-speed laser tube cutter for small pipes has arrived! This machine features a high-precision chuck system designed specifically for tube cutting. With excellent sealing and dust protection, it delivers clamping accuracy within ≤0.1mm ideal for ultra-precise small tube processing. The chuck rotates up to 160 RPM, with acceleration reaching 1.5G, easily enabling high-efficiency processing of small-diameter tubes. easily enabling high-efficiency processing of small-diameter tubes. it supports true ultra-short tail cutting saving cost from the very beginning. Fedpfxewwzudo Aanjpp Available in 3000W and 6000W, Handles square and round tubes from 10mm to 120mm in diameter, Also capable of cutting angle steel, channel steel, and I-beams A true all-rounder for small pipe fabrication. Supports automatic or semi-automatic loading Effortlessly enables smart and automated processing. One machine replaces three workers — A powerful and efficient tool for small pipe manufacturing!

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, TruLaser 3040 – CO2 4000W Fpsdpfx Aoyxc Egjanep Laser on: approx. 25,600 hours Beam on: approx. 13,100 hours

Condition: like new (used), functionality: fully functional, Year of construction: 2007, laser power: 4,400 W, Used Very Clean 4.4kw Bystronic Byspeed 3015 CNC laser for sale Used Bystronic 4.4kw lasers for sale VIDEO BELOW: Byspeed 3015 4.4kw – Loading system in the video not included Installed new/year: 2007 Manufacturer: Bystronic Model: Byspeed 3015 Sheet size: 3metre x 1.5metre / 3000mm x 1500mm Laser power: 4.4kw / 4400 watt Control: ByVision CNC02 Automation n/a Year: 2007 Condition: good working condition / service from new Byspeed 3015 4400w Turbo Blower Hours: 2,987 hrs – New turbo fitted end of 2023 under Bystronic warranty Good condition machine that has been covered from new by service contract with Bystronic UK Options Included: Fpsdpfx Aaer Hcm Djnjp Bypos automatic focus CutControl 2 cutting heads Tools and accessories Torit Dust collector

Condition: used, Year of construction: 2012, CNC laser cutting machine Manufacturer: Microstep Fsdpfx Aox Eh Droanspp Type: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC control: iMSNC Windows Laser operating hours approx.: 4,000-5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Sheet thickness steel (max.): 15 mm Sheet thickness stainless steel (max.): 8 mm Sheet thickness aluminum (max.): 8 mm Operating temperature: +10 to +30 °C and max. 90% humidity (at 20°C) Extraction duct (left and right): outlet on the left, diameter 250 mm Laser source: IPG Ytterbium laser system YLS 2.5 kW Laser chiller: LC 170.01-A.3.5 Voltage: 400 V / 3P / 50 Hz Filter system: TEKA 4H 5.5 kW External dimensions of the complete system: approx. 10,400 x 3,610 mm 121126ä

Year of construction: 2010, condition: used, Offered is a CNC oxy-fuel cutting system with gantry design. Track width: 5500mm, maximum travel speed: 24000mm/min, fuel gas: propane, control: ESAB VISION T5, renewed in 2022, two A5/200 oxy-fuel tool carriages, COOL-JET BIE 220 cutting torches, automatic height control, manual torch angle adjustment, travelling operator console, laser-based plate position detection, torch carriage extraction hood, transverse extraction duct, extraction fan, emergency-stop pull wires at the front and rear. Inspection possible by arrangement. Fodps Ai T Aajfx Aanjpp

Year of construction: 2010, condition: ready for operation (used), For sale is a CNC laser cutting machine from TRUMPF. laser power: approx. 3000W (3kW), working area: X/Y/Z 3000mm/1500mm/115mm. Additionally, a suitable Liftmaster from the year 2015 is offered, which can also be purchased separately. Fpedpexxa Ucefx Aanjp

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Series: NS-HG Type: Heavy pipe machine Beveling function: Optional Power range: Round pipe processing: 50mm~560mm Square pipe processing 50mm~560mm Chuck maximum 30r/min Fpjdpfoww Upzjx Aansp Machine weight: 29t Power specification: 380VAC, 50Hz Optional loading rack: Three-chuck chain automatic loading rack Optional unloading rack: Three-chuck chain automatic unloading rack Standard: System 5000A, including nesting, supports servo (beveling) Zero tail material rear card hollow dust removal Optional: Weld detection, safety fence (light curtain), radiation-proof glass