Used Cnc Edm Machine for sale (64,906)

Condition: good (used), Year of construction: 2012, Technical data – SD22P • Table dimensions: 410 x 210 • Maximum workpiece dimensions: 650 x 420 x 240 • Table travel: 300 x 200 • Electrode stroke: 370 Iolhccqsx Tquxjroht • Guide travel: 100 • Column travel: 100 • Spindle speed: 200 RPM • Electrode diameter: 0.1 to 3.0 • Electrode length: up to 400 Distance between guide and table • Standard: 50 to 240 • Maximum: 300 Installation / mechanics • Required floor space: 120 x 130 x 210 cm • Weight: 750 • Dielectric tank: 20 L • Filter: cotton / paper Electrical • Voltage: 200 V, 220 V, 346 V, 380 V, 420 V, 440 V (575 V Canada new) • Power (standard): 4 kVA • Switching device: Power FET Settings • T-ON: 0 to 99 • T-OFF: 0 to 99 • IP: 0 to 15 • STAB: 0 to 9 • GAP: 0 to 9 • SERVO: 0 to 9 Current • Amperage: 25 A • Option: 50 A Disclaimer • Technical data are provided for information only, may contain errors, and are subject to change at any time without prior notice.

Condition: used, Year of construction: 2015, Manufacturer: EXERON, Model: S 306 MF20/30, Year of manufacture: 2015, Serial No.: 306-0102, Control system: Exeron, Model MF20/30, Travel: 1,200 x 750 x 500 mm, Workpiece clamping table: 1,500 x 1,200 mm, Tank size: 1,550 x 1,250 mm, Fill height: 550 mm, Distance table/electrode holder: 300 - 800 mm, Max. workpiece weight: 4,000 kg, Linear scales in X/Y/Z axis, C-axis with direct measurement, Raising speed: 7.5 m/min, 8-position tool changer, gap filter system, control cabinet, cooling, CO² fire extinguishing system Ielhccjx Dahajqrjht This machine is part of an online auction.

Year of construction: 1990, condition: ready for operation (used), With dielectric, fully automatic water treatment system with ion exchanger, filtration system, clamping system with generator and adaptive discharge unit for precise machining, cooling and hydraulics, external pump and filtration systems. Without documentation, maintained internally, pneumatic hoses have been renewed, the machine has not been in operation since 2022 but was last functional. A clamping system is optionally available. An on-site inspection is possible. Ihjlew S Tygohccqrst

Condition: ready for operation (used), Two identical machines are available. Connected load: 32kW, length: 3500mm, width: 2400mm, height: 2400mm, weight: 3t. On-site inspection is possible. Iholhccouyk Rljqrst

Condition: ready for operation (used), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible. Islheuqackoccqroht

Condition: ready for operation (used), Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, traverse path X/Y/Z: 500mm/350mm/300mm, max. table feed: 1300mm/min, wire diameter range: 0.1mm-0.3mm, max. wire feed: 15m/min, traverse path U/V: +/-32mm, max. taper angle: 15°. Machine dimensions X/Y/Z: approx. 1900mm/2650mm/2100mm, weight: approx. 3500kg. Including generator unit and automatic wire threader AT. Documentation available. On-site inspection is possible. Islevb Hbrjhccqreht

Year of construction: 2011, condition: good (used), Additional equipement not included. Ihjlspxnwzjhccqret

Condition: like new (used), Year of construction: 2020, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: HU50610, Controller 15" touch screen with Windows Operation System Interface Table size 630 x 360 mm Dimension of tank LxWxH = 940 x 550 x 350 mm X travel 400 mm Y travel 300 mm Z travel 300 mm Distance between the table and chuck 100 ~ 400 mm Max weight of electrode 11/50 kgs Iolhccqjwktkkjrsht Max weight of wpc on table 500 kgs Max Output power 50A Best surface quality of work 0,08 Ra Input power 10 kVA Dielectric capacity 300 litre Dimensions of the machine LxWxH = 1320 x 1380 x 2150 mm Weight 1450 kgs Accessories, features - No. of filters 3 pcs. - C axis (max loading 11 kg) - Dielectrictank - Machine mouths - Manuals - Handtools

Condition: new, Year of construction: 2026, functionality: fully functional, Cost savings for the end user €80,000 vs. €40,000 Ijlhccexx Uc Ujqrsht DMA supplies high-quality CNC machines at bottom prices by eliminating expensive service contracts and on-site installation visits. Ideal for professionals who prefer to remain in control themselves. The purchase price includes: - CNC control “SYNTEC” - CNC Nesting/Milling CadCam - PEGASUS Professional CadCam including online training/helpdesk - Starter kit of cutting and drilling tools for sheet metal machining CNC machining centers. • Parts supply: In the event of a defect within 12 months, components will be shipped free of charge after diagnosis (photo/video). • Excluding labor costs: Replacement of the part is done by you or outsourced at your discretion. • Designed with minimal maintenance requirements • Digital preparation: via app or TeamViewer for direct online service. This makes technician visits unnecessary, resulting in significant cost and time savings. • Online service: 24/7 Digital Support as an Alternative • Video manuals: Clips covering calibration or part replacement • Exploded view diagrams: Instantly identify the necessary component Focus on functionality: Your machine, your management, our lowest price. You can call or WhatsApp us for more information and/or to make an appointment. WhatsApp:

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,220 mm, travel distance Z-axis: 100 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 25 m/min, number of spindles: 16, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Numerical Pegasus-Cad software Working area in X - 3050mm Working area in Y - 1220mm 2 working zones Lifting feed table, stackable Automatic loading system, Schmalz type Label printing system with automatic application on the loading table ATC 3-axis vertical electrospindle, 13.2 kW, with automatic tool changer, ISO 30 Automatic tool change system with 16 positions - positioned at the rear of the machine Automatic tool change system, carousel for fast changeovers Automatic unloading system with motorized conveyor belt Automatic worktable cleaning system Iholhoxx T R Dsccqrst Protection and safety system with light curtain and fencing Automatic lubrication system 250 m3/h - 5.5 kW vacuum pump Contact by phone: 0031634707163 Transport, installation, and user training negotiable Danmar Machines BV Almelo

Condition: used, Year of construction: 2012, Model Year: 2012 Ihelhccox Tuddoqret Width: 1,050 mm Length: 515 mm Height: 600 mm Number of Axes: 3 Holder: BT40 Spindle Speed (RPM): 8,000 Processable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm Islhoxdmgvsccqrjht CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: ready for operation (used), Year of construction: 2007, XYZ SMX SLV 3 Axis Turret Milling Machine ProtoTRAK | SMX Control (2007) 3 Axis CNC Capacity (X Axis, Y Axis & Quill) Spindle Taper ISO 40 Spindle speeds to 70 - 3600 RPM Table Size 1473 x 305mm Table Travel: X - 1000mm Y - 410mm Knee Travel: Z - 413mm Quill Travel Z - 127mm Air Power Draw Bar Supplied with a range of spindle tooling Coolant Year of Manufacture: 2007 Weight: 1850 Kgs Power Requirements: 18A *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79109 Machine Serial Number: 12308 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Iolsx Tiq Sjhccqrsht

Condition: used, Year of construction: 2022, functionality: unexamined, CNC long-bed machining center, model CMA 3RD-CNC, year of manufacture 2022, serial number 4063. The machine is suitable for drilling, thread cutting, milling, and other machining processes on large-format workpieces. Equipped with a robust steel frame construction and industrial PC-based control system from Omron. Features: Spindle: 13.1 kW, BT-40 taper, speed approx. 2,000–6,000 rpm. Rapid traverse speed: X and Y axes up to 30 m/min. Travel distances: X = 6,000 mm, Y = 600 mm, Z = 450 mm. Drilling capacity: Ø22–Ø42 mm. Thread cutting up to M30. Table width: 580 mm with T-slots. Electrical: 400 V, 50/60 Hz, 32 A, 3-phase. Control voltage 24 V. Weight approx. 7.2 tons. Includes tool changer with carousel magazine. Ijlhsx N Ncgjccqrjht

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW Ihjlhcjyahv Sjcqret EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock.

Condition: ready for operation (used), Year of construction: 2002, XYZ TC250 Vulcan Turning Centre Year of manufacture 2002 Ø250mm 3 Jaw Power Chuck. Max. Swing Ø500mm. Max. Swing Over Cross Slide Ø330mm. Max. Turning Length 650mm. Spindle Bore Ø87mm. Max. Bar Capacity Ø77mm. Axis Travel 'X'=220mm, 'Z'=650mm. Maximum Spindle Speed 3,500rpm (22.5kW Motor). Spindle Nose A2-8. 12 Position Turret (VDI 40 Toolholders). *For sale with Jet Machinery Ltd* Iholhew U Ekceccqrst Stock No: 78992 Serial No: 202068 Price: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2007, functionality: fully functional, rotational speed (min.): 3,000 rpm, feed length Z-axis: 500 mm, fuel type: electric, fuel: electricity, throat depth: 500 mm, Chuck Diameter: 12" Spindle Bore: 500 mm Iholhcex Nnryscqrst Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, spindle speed (max.): 6,000 rpm, travel distance X-axis: 607 mm, travel distance Z-axis: 286 mm, controller model: Fanuc 32i A, grinding spindle speed: 30,000 rpm, The offer includes a CNC hard turning lathe with FMB automation! The machine is from year of manufacture 2013, but it was only commissioned in 2017 (showroom machine)! Ihjlhccqox I A Hpjrst HARDINGE GT27SP GG-134HS TECHNICAL DETAILS X-axis travel: 607 mm Z-axis travel: 286 mm Max. spindle speed: 6,000 rpm Number of axes: 2 MACHINE DETAILS Control: Fanuc 32i A Dimensions & Weight Machine dimensions with robot cell (L x W x H): 4,600 x 1,600 x 2,700 mm Weight: approx. 2,100 kg Operating hours: 34,536 h EQUIPMENT MARPOSS measuring system MicroCentric 4-410-3-QC chuck Jäger HF spindle (spindle speed: 30,000 rpm) Oil mist filter S400 Spindle cooling possible FMB Unirobot LR Mate (Serial number: E-83200 (robot) / E15X36204 (controller), year of manufacture: 2015) Robot model: FANUC LR MATE 200iD7L-P2TB Controller: FANUC R30iB Max. part feed: 70 mm Axes: 6 Robot cell weight: approx. 1,000 kg GENERAL EQUIPMENT Knoll filter system KF110/500 (capacity: 500 l) Grinding spindle holder Grinding wheel arbor RINECK Reversing station in robot cell Feed conveyor for raw/finished parts 2,900 mm 2x MAS-MEX20-GT27-1-S385H adapters 2x MAS-MEX20 turn sleeves 2x MAS-turn rings 2x Hydro-expansion holders for internal turning tools Holder for turning tool + turning tool MARPOSS probe with holder

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: AH/121500, travel distance X-axis: 2,486 mm, travel distance Y-axis: 1,255 mm, travel distance Z-axis: 150 mm, table width: 1,290 mm, table length: 2,570 mm, TECHNICAL DETAILS Travel X-axis: 2,486 mm Travel Y-axis: 1,255 mm Travel Z-axis: 150 mm Maximum X-axis stroke: 3,120 mm Maximum Y-axis stroke: 1,685 mm Maximum Z-axis stroke: 250 mm Table length: 2,570 mm Islhox Tppneccqrjht Table width: 1,290 mm Tool changer positions: 8 units MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,870 x 1,900 x 2,300 mm Unladen weight: 2,500 kg Transport packages: 1 unit EQUIPMENT CE marking

Year of construction: 2019, condition: ready for operation (used), This 5-axis COSMEC CONQUEST 515/13 was manufactured in 2019. A robust CNC Wood Machining Centre, it features a working area of 6210 × 1650 mm, dual motorization on a closed gantry structure, and a spindle power up to 18 kW. It supports tool changes with multiple configurations and is compatible with ALPHACAM and ASPAN software. Consider the opportunity to buy this COSMEC CONQUEST 515/13 CNC Wood Machining Centre. Contact us for more information about this machine. Application Types Ielhccox S Si Isqroht CNC Wood Machining

Condition: used, Mecof CNC Bed Type Milling Machine 9m Table with 6.6m Travel, over 2m vertical travel. Iholhjyacbpeccqrjt Make: Mecof Type:CNC Bed Type Milling Machine CNC Control Heidenhain 426 Table Size 9,000 mm × 2,200 mm X-Axis Travel 6,626 mm Y-Axis Travel 1,000 mm Z-Axis Travel 2,040 mm Sub-Tables (Qty 2) 1,000 mm × 1,500 mm each Spec Sheet: Mecof CNC Bed Type Milling Machine 9m Table with 6.6m Travel, over 2m vertical travel. Make: Mecof Type:CNC Bed Type Milling Machine CNC Control Heidenhain 426 Table Size 9,000 mm × 2,200 mm X-Axis Travel 6,626 mm Y-Axis Travel 1,000 mm Z-Axis Travel 2,040 mm Sub-Tables (Qty 2) 1,000 mm × 1,500 mm each

Year of construction: 2018, condition: excellent (used), Profile Cutting System Cobra 2000 Nominal Cutting Area 2,000 x 8,000 mm - CNC Type EtherCAT EDGE Connect: 4-Axis Cutting Table Kemper Mechanical Heavy Duty with easyFRAME Ijlhccsx Uv N Rjqrsht Plasma Arc Cutting System XPR300 VWI Communication Method Ethernet CAD/CAM Software Procut Professional (1) TORCH CARRIAGE CONFIGURATION Torch Carriage 1 (Master) Station 1 Cutting System XPR300 VWI Height Control Arc-Voltage THC Collision Protection Magnetic Breakaway

Condition: used, Year of construction: 2013, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, total height: 3,355 mm, total length: 5,250 mm, total width: 3,573 mm, table width: 820 mm, table length: 3,500 mm, table load: 2,500 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, CNC Control Mazatrol Matrix 2 Table size 3500 x 820 mm Table load 2500 kg Number of pallets 1 Movement X-Y-Z-axis 3000 - 800 -720 mm C-axis (table rotation) 0,0001° B-axis travel ± 110° Spindle speed 35 - 18.000 R/min Spindle taper HSK-A63 Spindle motor 35-26 kW Magazin capacity 30 Ielhcsxftkqjcqrjht If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 530, empty load weight: 45,000 kg, total length: 11,055 mm, total width: 6,320 mm, total height: 4,140 mm, Type: DMC-4100LH 2800 mm tussen de kolommen!! MA-25 2-assige universele freeskop - 20 kW - 6000 tpm C-bereik: 0-360° Bereik A-as: +/- 110° Koeling door spindel 40 bar Totaal vermogen: 67 kW Isljxp Sk Dshccqreht Geen fundering nodig! De Johnford DMC-serie dubbelkoloms brugfrees met bewegende tafel is gemaakt van een eendelige Meehanite gietijzeren brug/kolomconstructie die naar verluidt 30 procent minder vloeroppervlak in beslag neemt dan vergelijkbare verticale bewerkingscentra met een C-frame. De brugfrees is verkrijgbaar in versies met zowel een bewegende tafel als een schuifkolom (vaste tafel), variërend van 91 x 91 x 76 cm tot 18 x 6 meter. De brugfreesmachines hebben een lange basis met volledige ondersteuning van de tafel over de volledige 130 cm Y-asverplaatsing, waardoor zware lasten kunnen worden bewerkt. De Y- en Z-as dragen te allen tijde een vaste belasting, terwijl de X-as de enige dynamische belasting draagt, wat zorgt voor een nauwkeurige bewerking met nauwe toleranties tijdens bewerkingen met hoge snelheid. Omdat er geen tafeloverhang is, worden de helling en gierhoek van de X-as geëlimineerd. De afstand tussen de hartlijn van de spindel en de kolom is geminimaliseerd, wat zorgt voor extra stijfheid. De zwaar geribbelde gietijzeren constructie van de machine zorgt voor een lange standtijd en een optimale oppervlakteafwerking. De combinatie van dubbele schroeftransporteurs en een rupsband zorgt voor volledige spaanafvoer met minimale handmatige reiniging. Daarnaast wordt eindige-elementenanalyse (FEA) gebruikt bij het ontwerpen van elke brugfrees, waarbij de effecten van realistische omstandigheden, zoals trillingen, hitte, vloeistofstroming en andere fysieke invloeden, worden gesimuleerd. Longitudinal travel X-axe: 4100 mm Cross travel Y-axe: 2800 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 4200 x 2400 mm Power on spindle: 30 kW Admission in millinghead (ISO): BT 50 Max speedrange: 6000 rpm

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table width: 1,400 mm, table length: 1,600 mm, table load: 3,500 kg, Equipment: documentation/manual, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Spindle motor: 28/19 kW Ielhccqox Tulnsreht Magazin capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58000 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.