Used Cnc Cutting Machine for sale (65,444)

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Nedeym Nbcopfx Aacscn Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: used, Year of construction: 2019, CNC Portal Plasma Cutting Machine Manufacturer: Microstep Model: MG 4501.20 BkP Year of Manufacture: 2019 CNC Control Working Area: 2,000 x 4,500 mm 1 x 2D plasma torch with Hypertherm XPR300 power source including Optimix gas console 1 x drilling spindle, 26 kW, up to 40 mm diameter, including 8-station automatic tool changer 1 x preparation for retrofitting a rotator (for bevel cuts) 1 x nesting software on the CNC controller ä25226 Nsdpfoyay H Asx Aacecn Availability: May 2026

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (bevel unit) with oxy-fuel torch Manufacturer: Zinser Type: 2425-I/3600 Year of manufacture: 2017 CNC control: 5010 Track length: 11 m Burning table with oscillating conveyor system, including extraction system Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source automatic gas console incl. automatic rotating plasma bevel unit Bevel System 2015/350 Filter unit Downflow 3DFP9-SP Njdpfx Asw Rpvbsacscn Power: 9 kW Laser diode 25226ä

Condition: good (used), Year of construction: 2008, CNC Gantry Plasma Cutting Machine Manufacturer: Messer Model: Multitherm 4000 CNC Control: Global Control Plus Year of Manufacture: 2008 Retrofit: 2019 Extraction Table: 2,000 x 3,000 mm 1 Oxy-fuel Torch ALFA 1 Plasma Torch Power Source: Kjellberg HiFocus 280i Filter System: Z-Line 9 ZDC Ncedpeiff Dasfx Aacen In-house technicians for installation, commissioning, and training! All spare parts in stock

Condition: good (used), Year of construction: 2012, CNC gantry plasma cutting machine Manufacturer: Microstep Model: SPL PAA 9001.25 Year of manufacture: 2012 CNC control Working area: 2,500 x 9,000 mm 1 plasma torch with Kjellberg HiFocus 280i power source 2 oxy-fuel torches (propane) Beuting oscillating conveyor table Nsdpfxsu U Hm Aj Aacjcn Donaldson DFPRO12 filtration system for outdoor installation 25226ä

Condition: used, Year of construction: 2019, CNC portal plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 CNC control Working area: 2 x 4 m "MasterCut" plasma rotator with fully automatic support for weld seam preparation 1 plasma torch with Kjellberg HiFocus 280i power source TEKA filtration system Nsdpfx Asxnmbnsacocn No. 25226

Condition: used, Year of construction: 2012, CNC Laser Cutting System Manufacturer: Microstep Model: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC Control: iMSNC Windows Approx. laser operating hours: 4,000–5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Maximum sheet thickness - Steel: 15 mm Maximum sheet thickness - Stainless steel: 8 mm Maximum sheet thickness - Aluminium: 8 mm Operating temperature: +10 to +30 °C and max. 90% humidity (at 20°C) Extraction duct (left & right): Outlet left Ø 250 mm Ncsdpfx Aaex Eh Drscjn Laser source: IPG Ytterbium Laser System YLS 2.5 kW Laser chiller: LC 170.01-A.3.5 Voltage: 400 V / 3-phase / 50 Hz Filter unit: TEKA 4H 5.5 kW Overall dimensions: approx. 10,400 mm x 3,610 mm

Condition: used, Year of construction: 2006, CNC portal plasma cutting machine Manufacturer: Messer Model: Multitherm 4000 Year of manufacture: 2006 CNC control: Global Control Working area: 3 x 12 m Track gauge: 4,000 mm Track length: 15 m Extraction table 1 x plasma torch with Hypertherm HPR260 1 x plasma torch with Skew Rotator Delta and Hypertherm HPR260 Without filtration unit ä25226 Ncsdeykpd Espfx Aacen

Condition: used, Year of construction: 2023, CNC Gantry Plasma Cutting Machine with Rotator Manufacturer: Microstep Model: MasterCut 6001.30PtkG Year of Manufacture: 2023 CNC control system Working area: 3,000 x 6,000 mm 1 plasma torch with Kjellberg Q3000 power source 1 oxy-fuel torch GCE FIT+ three (cutting gas: acetylene) Burning/cutting table with sectional extraction, 6,000 x 3,000 mm Plasma rotator 'MasterCut' with fully automatic support ACTG automatic calibration unit for the beveling head Ncjdpfx Aaoxu U Ddocjn Kemper extraction system 8000 (year: 10/2015) Asper Basic 2D programming software + Asper BevelCut bevel cutting programming Other technical data: MicroStep machine control system with MMI console and 24" touchscreen iMSNC module expert system iMSNC module for automatic calibration of mechanical probing iMSNC module assistant for loading CNC programs LCD control unit on the gantry Laser pointer with automatic offset transfer USB 3.0 connectivity for storage devices MicroStep RemoteDiagnostics remote maintenance module Grate cover in the cutting table Reinforced version of the cutting table Connection of the fine plasma source to CNC control Automatic gas console control Electric and mechanical torch height sensing LED signal column on the gantry bridge (2 colors) Tactile safety shut-off device for guide rails Light curtain safety system (collision protection) on the gantry bridge via emergency stop Smart Z Movement ACTG calibration report Fully automatic oxy-fuel support Automatic gas console for oxy-fuel torch (cutting gas: acetylene) Active collision protection 25226ä

Condition: used, Year of construction: 2006, CNC Gantry Oxy-Fuel Cutting Machine Manufacturer: Bach Model: ACK-2D Year of manufacture: 2006 Njdpfx Ajw El Udsacecn CNC control: NBS300 Working table: 1.5 x 6 m 2 oxy-fuel torches 18226ä

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Microstep Nodpjydibqefx Aacscn Model: MasterCut Compact 3001.15P Year of manufacture: 2023 CNC control Working area: 1,500 x 3,000 mm 1 x plasma torch with Hypertherm Powermax 45 power source Air plasma system Cutting thickness: 12 mm piercing For thin sheet metal Without filter Available: March 2026

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Messer Cutting Systems Model: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm 1 x plasma torch with Kjellberg HiFocus 280i neo power source Nodpfoyhd Rbsx Aacjcn Automatic gas console Donaldson DFPRO 6 Cyclopeel filtration unit Cutting software: Omniwin Standard Availability: immediate ä25226

Condition: used, Year of construction: 2005, CNC Gantry Plasma Cutting Machine Manufacturer: Messer Nsdpfx Aeykruaeacocn Model: Omnimat L8000 Year of manufacture: 2005 CNC Control: Global Control Plus Track gauge: 8,000 mm Equipment: 1 x Oxy-fuel bevel cutting unit DAF/L for weld seam preparation (bevels) 1 x Skew Rotator with Kjellberg FineFocus 800 power source 3 x Oxy-fuel torches ALFA 1 x Marking unit FineMarker Without table, filter or guide rail ä25226

Condition: used, CNC flame cutting machine BACH type ACW 2500 Nsdpfxef Ncade Aacocn Flame cutting machine with CNC control NBS 400 Machine. No. 14 561-06 Year of construction 2006 Cutting area 2500 x 6500 mm track length 8000 mm Track width 3345 mm Track height 650 mm 2x machine cutting torch with cutting table

Condition: good (used), Year of construction: 2016, CNC Portal flame cutting machine Manufacturer: Sato Type: Satronik D5765 Manufacture: 2016 CNC control: Satocontrol CNC 3010 Track width: 5.750 mm 6 x oxyfuel torche Nsdpfsgqkc Nox Aacecn without tracks without table without filter

Condition: used, Year of construction: 2020, CNC gantry plasma cutting machine with Skew Rotator bevel unit Manufacturer: Messer Model: Multitherm 4000 Ncjdpfx Aaex Dlwmocjn Year of manufacture: 2020 CNC control: Global Control Plus Working area: 3 x 12 m Track gauge: 4,000 mm 1 oxy-fuel torch ALFA 1 plasma torch with Skew Rotator bevel unit Power source: Hypertherm XPR300 Cutting capacity: 50 mm pierce 80 mm separation cut Beuting extraction table without filter unit Software: Omniwin with Bevel module ä25226

Condition: used, Year of construction: 1995, CNC Gantry Flame Cutting Machine Manufacturer: Messer Model: Omnimat P 7000 Year of manufacture: 1995 CNC control: Global Control Plus Track gauge: 7,000 mm 8 x oxy-fuel torches type ALFA 8 x Omnilift 200 Without runway Ncsdpsyay Dhefx Aacon Without table Without filter 25226

Condition: good (used), Year of construction: 2007, CNC portal plasma cutting machine Manufacturer: Microstep Ncsdpfouv Hkgex Aacon Model: SPL-P 12001.20 Year of manufacture: 2007 CNC control 1 plasma torch with Kjellberg HiFocus 160i power source Extraction table: 2 x 12 m Donaldson Torit DCE filtration system

Condition: good (used), Year of construction: 2012, Machine is in good working condition. Ncedpeylx Hrefx Aacon

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, total width: 2,775 mm, total length: 4,640 mm, input voltage: 400 V, input current: 50 A, working width: 1,600 mm, cutting height (max.): 25 mm, compressed air connection: 6 bar, Bullmer TURBOCUT S 2501 CV – Conveyor CNC Controlled Cutter for Multi-Layer Cutting Knife-cutting system including drilling unit from company liquidation. Excellent condition, top specification, and fully operational. The CNC cutter was used for cutting lightweight women’s outerwear. It was not subject to heavy use and was handled with extreme care. The machine was fully operational up until the last day of use (04/2025), and received a complete service shortly before decommissioning. Wear parts, such as the cutting bristles, are in very good condition. Pneumatic hoses and connectors (Festo) were replaced in 11/2024. BY THE WAY: We are a BULLMER service partner and authorized dealer. Manufacturer: BULLMER Spezialmaschinen GmbH & Co. KG, Mehrstetten Condition: USED Assessment: Very good Year of manufacture: 10/2007 FEATURES: Cutting height: up to 25mm (compressed) Working width: 1,600mm Cutting window length: 1,800mm Total length: 4,640mm Total width: 2,775mm Operating system: WinXP Original price: €105,000.00 (net). Further functions: Tilt correction, double cut suppression, and much more. CONNECTIONS: 1. Control cabinet for vacuum pump, bristle and cleaning bath Voltage: 400 V, 50/60 Hz Phases: 3 PH / N / PE Power rating: 2.5 + 15 kVA Main fuse: 50 A 2. Control cabinet for controller / PC Voltage: 400 V, 50/60 Hz Phases: 3 PH / N / PE Power rating: 3 kVA Main fuse: 16 A Ncjdpsyh Nlusfx Aacjn SITE REQUIREMENTS (RECOMMENDED): Protection: 3 x 50 A slow-blow Cable cross-section: 5 x 10 mm² Complete documentation included in delivery: * Operating instructions * Spare parts lists * Manuals * Circuit diagrams * EC Declaration of Conformity COLLECTION: COLLECTION ONLY in D-32107 Bad Salzuflen – NO SHIPPING! Loading onto trailer/truck is possible indoors in our large facility (dry loading). LOADING: We can assist with loading using our equipment (forklifts, pallet trucks, etc.) at cost. Load securing: Adequate securing materials must be provided by the buyer: anti-slip mats, lashing straps, etc. ADVANTAGE: The cutter has been disassembled for easier transport. Collection is therefore very simple. We collected it ourselves with a single car trailer (loading area 6 x 2.2m). Currently, the cutter is in the described, dismantled and ready-for-collection condition. NOTE REGARDING WARRANTY/LIABILITY: This item comes from a company liquidation. Items from a verified company liquidation can be inspected and function-tested on site as far as possible. Sold as seen/inspected – any warranty or liability is excluded. By taking possession, the buyer agrees to these terms. COMMERCIAL SALE: You will receive a proper invoice with VAT shown. Errors excepted.

Condition: ready for operation (used), For sale is a CNC laser cutting system by Amada Co., Ltd., model PROMECAM / FO-3015 NT, equipped with the ASLUL 300 FO Tower automatic loading and unloading system. This is a highly productive industrial unit for automated sheet metal processing, including an integrated tower storage system with automatic material handling for efficient manufacturing processes with minimal manpower requirements. Technical Data – CNC Laser Cutting System AMADA PROMECAM 3015 NT with ASLUL 300 FO Tower Base Machine – Laser System 3015 NT Machine type: CNC laser cutting machine (CO₂ laser, flying optics) Manufacturer: Amada Co., Ltd. / AMADA PROMECAM Model: FO-3015 NT Control: AMNC-F CNC with touchscreen Laser technology: CO₂ laser, flying optics system Laser Power Laser output: 4,000 W Laser resonator: Fanuc AF 4000 Laser principle: CO₂ silent discharge Continuous power stability: ± 1% Working Area X-axis: approx. 3,070 mm Y-axis: approx. 1,550 mm Z-axis: approx. 100 – 200 mm Max. sheet size: approx. 3,000 × 1,500 mm Max. workpiece weight: up to approx. 920 kg Cutting capacity (typical): Mild steel: up to approx. 20 mm Stainless steel: up to approx. 15 mm Aluminum: up to approx. 10 mm Material thickness in general: 0.5 – 20 mm depending on material and laser power Axes and Dynamics 3 CNC axes: X, Y, Z Positioning accuracy: ± 0.01 mm Repeatability: ± 0.005 mm Positioning speed: up to 120 m/min per axis Simultaneous speed: up to 169 m/min Machine Design Flying optics system Heavy-duty cast frame for high stability Automatic pallet changer (2-table system) Automatic cutting head tracking Capacitive cutting head Connections Power supply: 400 V Total power consumption: approx. 70 kVA Compressed air requirement: approx. 6 bar Machine Dimensions and Weight Machine weight: approx. 11,000 kg Machine dimensions: approx. Length: 6,700 mm / Width: 4,400 mm / Height: approx. 2,100 mm ASLUL 300 FO Tower System – Automatic Sheet Storage System: automatic loading and unloading system with tower storage Max. sheet size: 3,050 × 1,525 mm Max. pallet weight: up to 3,000 kg Number of pallets: multi-level automatic storage system Pallet change time: approx. 55 seconds Features: automatic loading and unloading automatic material handling automatic pallet changing finished parts handling integration into automated production lines Equipment Flying optics laser system Ncodeyk S Rzepfx Aacsn automatic shuttle pallet changer AMNC-F CNC controller ASLUL 300 FO Tower System automatic material handling suitable for industrial series production fully automatic operation possible extremely high productivity reduced setup times minimal personnel requirement Condition Used Technically inspected and fully functional The system can be demonstrated Immediately available Delivery time: upon agreement Freight terms: ex site, loaded free of charge Dismantling / transport / reassembly can be organized

Year of construction: 2008, condition: ready for operation (used), Working dimensions X/Y: 2000mm/1500mm, max. clearance height: 70mm, max. material width: 1690mm, speed: 2m/min, acceleration: 18m/s², resolution: 0.001mm, accuracy: +/-0.05mm, repeatability: +/-0.05mm, laser source: Rofin ScX series 300W, laser class: 1, laser power: 300W. The laser source is defective. Including shuttle table, cooling unit, hydraulic unit and register mark recognition camera. Documentation available. An on-site inspection is possible. Ncedpoyi E Eijfx Aacsn

Year of construction: 2011, condition: ready for operation (used), Laser power: 4kW, Laser type: CO2, Laser model: YB-L400A 8M, Wavelength: 10.6µm, Pulse type: N/P, max. Beam diameter: 22.5mm, Power stability 8h: +/-2%, Gas consumption: approx. 30l/h, Travel path X/Y/Z: 3260mm/1545mm/430mm, max. Workpiece dimensions X/Y/Z: 3050mm/1545mm/25mm, max. Table load: 915kg, Machine dimensions X/Y/Z: approx. 8000mm/2900mm/2600mm, Weight: approx. 14200kg, Control: Mazatrol Preview M, Operating hours: approx. 31105h. The integrated thread cutting unit is defective. Including linear guide for the tube cutting device and various wear parts. Documentation available. An on-site inspection is possible. Nedpfx Aajyifl Hjcocn

Year of construction: 2024, condition: like new (used), functionality: fully functional, machine/vehicle number: 571120240869, Lightly used: Edda CNC carton cutting machine Very neat machine, offered for sale due to a change in production. The machine can be seen in operation on site and is still in use. Site visits and demonstrations are possible! See the video for machine operation. Fully automatic, self-adjusting knives, equipped with 11 longitudinal knives and 1 cross-cutting knife. Ideal machine for custom packaging of parts to be shipped. Machine is equipped with TPA control system, very user-friendly. Feed module for fanfold carton is present. Ncjdpfexw R Ukex Aacsn Price ex works Staphorst.

Year of construction: 2010, condition: ready for operation (used), Max. sheet dimensions: 6050x2550mm, max. cutting speed: 10m/min, length: 8125mm, width: 3800mm, height: 1900mm, with documentation, an on-site inspection is possible. Nsdpfxsri Skas Aacjcn