Used Cnc Plasma Cutter for sale (11,513)

Condition: good (used), Year of construction: 1997, machine/vehicle number: 71-000988, Offer 24820 Kedjvqbdyopfx Ag Nsdu Technical data: - Cutting current continuously adjustable 30 - 100 A - Duty cycle 80 A / 100% ED - 100 A / 80% ED - Max. cutting thickness - Steel approx. 32 mm - Aluminum approx. 25 mm - Stainless steel approx. 55 mm - Air connection 5 bar - Gas mixing system - Connection 400 V / max. 14.5 kVA - Space requirement approx. W 800 x H 1650 x D 700 mm - Weight approx. 250 kg

Condition: as good as new (ex-display), Year of construction: 2023, air pressure: 5.9 bar, Next-generation air plasma system that significantly simplifies system operation for cutting and gouging up to 32 mm. Features automated process setup using advanced RFID-enabled SmartSYNC torch and a revolutionary one-piece consumable cartridge that provides traceable usage data. Technical data: Cutting performance: Recommended cutting capacity: 32 mm - 500 mm/min Maximum cutting capacity: 38 mm - 250 mm/min Severance capacity: 50 mm - 125 mm/min Piercing: 22 mm Typical gouging: Metal removal rate: 8.6 kg per hour Gouge profile: 6.6 mm (D) x 6.0 mm (W) Scope of delivery: Power cable, H105 handheld torch 23 m, 75° Workpiece lead with clamp, Operating manual Kdsdsw U Stqopfx Ag Nsu Option: Hypertherm cartridge reader, software

Year of construction: 2021, condition: ready for operation (used), A like new plasma cutter is available. Operating hours: 30h, open circuit voltage U₀: approx. 292V, output current I: 105A at 30A 92V–105A 122V at 92 or 122V under 30A, output voltage under load nominal HYP U₂ IEC U₂: approx. 160V at 100 percent power approx. 142–160V depending on standard, duty cycle at 30°C at 80 percent power 105A at X at 40°C, at 100 percent 94A or at other voltages, supply voltage input: three phase 3-PH multiple voltages possible 380–400V etc. U1 50/60Hz, protection class IP23CS, standards EN60974-1 EN60974-10 Class A GOST etc., power consumption P1: 14.9kW/h approx. 14.9kW, duty cycle at 40°C: 80 percent at 105A at certain voltages, 100 percent at slightly lower currents for example approx. 94A at higher voltages, other combinations depending on voltage and standard. Length with handles: 592mm, width: 274mm, height: 508mm, weight with torch 7.6m cable: 45kg. Table with sheet clamp, collection container and rail guide for the plasma cutter optionally available. An on-site inspection is possible. Kdodpfx Ajxddaasg Nou

Year of construction: 1989, condition: good (used), Operating hours: 17 Machine number: 160973 Power: 4.500 W Voltage: 220 V Open circuit voltage: 320 V Amperage: 16 A Insulation type: F Kdsdpfx Agobfa Hwj Nou Cooling type: F

Condition: good (used), Year of construction: 2007, CNC gantry plasma cutting machine Manufacturer: Microstep Model: SPL-P 12001.20 Year of manufacture: 2007 CNC control 1 plasma torch with Kjellberg HiFocus 160i power source Extraction table: 2 x 12 m Filter system: Donaldson Torit DCE Kjdsuv Hkgspfx Ag Nsdu 91025ä

Condition: used, Year of construction: 2019, functionality: fully functional, total height: 2,100 mm, total width: 9,000 mm, sheet thickness (max.): 6 mm, punching diameter: 105 mm, overall weight: 17,500 kg, table height: 900 mm, color: blue, power of feed motor: 20,000 W, Punching machine equipped with two independent tool stations with electrohydraulic heads and HiFocus 160i plasma unit from Kjellberg. The machine is characterized by: - automatic adjustment of the plasma torch height, - TRUMF quick tool change system - short changeover time; - X-axis movement range from 0 to 3000 mm, - Y-axis movement range 0d 0 to 1500 mm, - stepless adjustment of feed speeds, - possibility of nibbling, punching and embossing, - stepless adjustment of stroke height up to 90 mm, - tool punching up to 6 mm thick, - plasma torch cutting up to 12 mm thick, - easy programming. Available functions: - single hole, - row of holes, - circle of holes, - circle nibbling, Kedpswayilefx Ag Nedu - rectangular chipping, - matrix, - nibbling of cuts, - object rescaling, - contour program (in combination with Rotation station), - subroutines, - object repetition, - trimming, - hole-free zone, - ellipse, - V-belt, - mirror image, - waste removal. High-quality plasma cutting unit for structural steel, high-alloy steel and aluminum. Reduces the use of additional processing due to the appropriate cutting surface. Water-cooled PerCut 210 plasma torch with high heat dissipation efficiency and long nozzle durability thanks to the use of swirl gas technology.

Condition: used, Plasma cutter CLOOS type CPS 40/80 Year of manufacture 1990 Power at 60 % ED 80 Amp. Power at 100 % ED 40 Amp. Adjustment range 40 and 80 Amp (2 steps) cutting capacity with steel max. 25 mm Hose package length 5.5 meters Mains connection 400 Volt with 32 Amp. Plug Kjdpfjdzqccox Ag Nedu - Hand torch CLOOS dimension L x W x H 700 x 600 x 750 mm weight 160 kg good condition

Condition: excellent (used), Year of construction: 2019, V302 CNC PLASMA MACHINE. Kdodpfx Aowu Dtdjg Nsu 6000mm x 2000mm KJELLBERG SMARTFOCUS 300 PLASMA SOURCE. 80mm CAPACITY PLASMA. 100mm CAPACITY OXY FUEL. DONALDSON EXTRACTION UNIT VACAM CNC CONTROL

Year of construction: 2008, condition: ready for operation (used), A complete plasma cutting system Oerlikon including peripheral equipment is available. 1) CNC plasma cutting system Oxytome 30, year of manufacture: 2008. 2) Plasma source Air Liquide Nertajet HP125, year of manufacture: 2008. 3) Filter unit Donaldson Torit DCE DFPRO 8-Cyclo, year of manufacture: 2008, weight: approx. 1625kg. 4) Cooling unit Air Liquide Friojet-30, year of manufacture: 2008, cooling capacity: 2kW, max. operating pressure: 29.5bar, refrigerant: R407c, weight: 80kg. Documentation available. An on-site inspection is possible. Kdjdjw U T Upjpfx Ag Nsu

Condition: used, Year of construction: 2012, functionality: fully functional, cutting width (max.): 2,540 mm, cutting height (max.): 50 mm, Cuttec TAC2 CT265NJL CNC multi-layer cutter with solid carbide blade, used for cutting fiberglass material Ksdjwktnijpfx Ag Nodu Working width: 100 inches (2540 mm) Cutting window length: approximately 3500 mm The cutter has been completely disassembled and must be reassembled. The clearing belt has been shortened and is no longer as long as shown in the pictures. A few meters of clearing belt are still available. A complete set of new bristles for the cutting belt can be purchased as an option (not included in the purchase price). The unwinders shown are also not included in the purchase price.

Condition: ready for operation (used), Year of construction: 2008, Zinser 2325-N Kedowwtzpspfx Ag Nedu 3100 x 6050 mm working area 1x straight oxy-fuel torch Sideros ECO 9 filter unit Control system renewed in 2021. More information in the attached datasheets.

Condition: new, Year of construction: 2025, Product characteristics Kdsdpfx Ajvxhwvog Nou The plasma burner or oxygen-gas CNC1 burner is a mobile device designed for cutting shapes out of a metal sheet. The machine does not require anchoring, thus reducing the assembly time considerably. Additionally, it enables for placing the machine in any location within the hall without any new expenses. The machine is equipped with an excellent quality wheel system that together with the low weight portal makes the plotter one of the fastest machines available on the market. The machine can be used for manual and automatic cutting. It is equipped with a digital controller that enables cutting out complicated shapes. The machine proves itself very well in the shipbuilding, machine-building and power industry. CNC1 has been equipped with a precise system of X/Y axes guides. The burner is controlled by Sino-USA electronic production system that is characterized by a high precision and elimination of the errors occurring during operation. The machine is very easy to configure. A manual configuration is possible for simple shapes and automatic configuration is possible for more complicated figures. The cutting pattern and the burner motion are shown on a display. An original FastCAM software is attached to the machine for easy configuration. The software is in English which makes the work easier. FastCAM is a technological CAD/CAM program, which is intended for designing and defining cutting paths of the elements cut out by CNC burning machines. The program shall be installed on an office PC or on a portable computer. After defining the way of cutting the operator receives a ready control code, which should be transferred to the control system of the machine. FastCAM program is a standard element of our machines. BASIC INFORMATION User-friendly interface – easy operation, even for people without prior experience of working with such programs as FastCAM Import of drawings in the *.txt format from any programs similar to e.g. AutoCAD, SolidWorks etc. MAKRO – a library containing standard shapes enables creating figures without the necessity of drawing them in CAD system. The program provides 2D figures NESTING – an optimal usage of sheet metal thanks to the automatic arrangement of elements on a sheet DEMO – shows a working path without having to turn on the plasma source or oxygen VOLTAGE HEIGHT CONTROLLER The machine is equipped with THC (a voltage control of the plasma burner blowtorch height). A precise control (+/- 0.1 mm) of the plasma blowtorch distance from a sheet metal during cutting. Higher accuracy and absence of defects which capacitive sensors and roller disks have. The parameters of the controller are collected automatically from the Automatic Cutting Parameters Selection table. Technical data Power supply 230 V LCD 7" color Code format G-Code Working dimensions 1500×3000 mm Cutting speed 50–3000 mm/min Illustrations are preview only, the device is sold without the table. Manufacturer: Cormak

Condition: used, Plasma cutting unit MB - Welding Technology Type Plasmaprof 50 Equivalent to CEBORA Machine no. 244311 Year of manufacture: approx. 1992 Power: 50 A = 35% duty cycle 30 A = 100% duty cycle Adjustment range: 2 steps Torch hose length: approx. 6 meters Kodpodzqa Hjfx Ag Nodu Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 32 Amp plug Installation dimensions (L x W x H): 500 x 350 x 700 mm Weight: approx. 80 kg Good condition

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge. Kodpfx Astp Dhpjg Nedu  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: ready for operation (used), A precise Kuris textile cutting machine including peripheral equipment is available. Cutting height: 55mm, max. cutting speed: 45m/min, positioning speed: 60m/min, working width: 1930mm, machine weight: approx. 4000kg. Including 50kW vacuum pump and tables. Documentation available. On-site inspection is possible. Kjdpfxsv R Ew Ro Ag Nedu

Condition: good (used), Year of construction: 2003, Plasma cutting machine, plasma cutter for plasma cutting system, plasma/oxygen cutting system Kjdpswkqf Ssfx Ag Nodu -Manufacturer: CR Electronic SRL, torch head for plasma/oxygen cutting system type OXY 5.1 - 25 -Distance control system iht type M 4000 -Individual components: see photos -Shipping/Price: complete -Dimensions: 1110/600/H430 mm -Weight: 83 kg

Condition: used, Year of construction: 1990, Motor output 5 kW Kodpfx Agowgnz Ne Nodu Weight 1.500 kg Control cnc

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, machine/vehicle number: 061, feed length Y-axis: 35 mm, feed length Z-axis: 67 mm, grinding length: 50 mm, grinding spindle speed: 6,000 rpm, grinding diameter: 2 mm, disc diameter: 150 mm, section length (max.): 15 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the period from 28.07.2025 to 31.07.2025. Three simultaneous axes + two robot axes TECHNICAL DETAILS Control: ROLLOMATIC Grinding Range Grinding diameter: 0.1 – 2.0 mm Collet: B 8 Cutting length: 0 – 15 mm Helix angle: 24 – 45° Overall length: 30 – 50 mm Travel Z: 67 mm Travel Y: 35 mm Axes A: 63° B: 360° C: 360° Station 1 Robot for loading/unloading Shank diameter: 0.5 – 3.175 mm Station 2 Flute and relief grinding Direct drive spindle: 70 mm diameter, 0.30 kW Inverter: 2,000 – 6,000 rpm Kdsdjwvi Rkopfx Ag Nju Grinding wheel for flutes: 150 mm Ø Grinding wheel for relief: 100 mm Ø MACHINE DETAILS Overall height: 2,200 mm Overall length: 2,000 mm Overall width: 2,300 mm Total weight: 2,000 kg Operating voltage: 3 x 380 V Frequency: 50 Hz

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for Ksdpfevpalaox Ag Nedu bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Year of construction: 2014, condition: ready for operation (used), A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014. Kedpfx Ajwmqwysg Nsdu

Condition: used, Year of construction: 1992, max. grinding diameter 0 mm grinding length 0 mm Kdedpfxet Hwpao Ag Nsu workpiece length 970 mm total power requirement 12 kW weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 236, spindle speed (max.): 6,000 rpm, feed length Y-axis: 35 mm, feed length Z-axis: 67 mm, grinding length: 50 mm, grinding diameter: 2 mm, section length (max.): 15 mm, No minimum price – sale guaranteed to the highest bidder! Submitting a bid obliges you to collect the item within the period from 28.07.2025 to 31.07.2025. Three-axis simultaneous + two robot axes TECHNICAL DETAILS Control: ROLLOMATIC GRINDING AREA Grinding diameter: 0.1 – 2.0 mm Collet: B 8 Cutting length: 0 – 15 mm Spiral angle: 24 – 45° Overall length: 30 – 50 mm TRAVEL Travel Z: 67 mm Travel Y: 35 mm AXES A: 63° B: 360° C: 360° STATIONS Station 1: Robot for loading/unloading Shank diameter: 0.5 – 3.175 mm Overall length: 30 – 50 mm Station 2: Flute and relief grinding Direct drive spindle: 70 mm diameter, 0.30 kW Frequency converter: 2,000 – 6,000 rpm Grinding wheel (flutes): 150 mm diameter Grinding wheel (relief): 100 mm diameter MACHINE DETAILS Kdedowvi H Sepfx Ag Neu Operating voltage: 3 x 400 V Frequency: 50 Hz Overall height: 2,200 mm Overall length: 2,000 mm Overall width: 2,300 mm Total weight: 2,000 kg

Condition: good (used), Year of construction: 2012, ■ BCS Thermo 2000 Plate cutting machine (operating range 2.000 x 6.000 mm) ■ Gantry beam (length 3.500mm) ■ Machine track (8m on both sides of the machine) ■ Plasma cutting and extraction table (2.000 x 6.000 mm, 1 pcs) ■ Plasma cutting unit Hypertherm HPR260XD (1 pcs) o IHT M4000 PCS automatic height control o Driven suspension (motor driven, including laser pointer) ■ Oxy-fuel cutting unit (1 pcs) o IHT M4000 CAP automatic height control o Driven suspension (motor driven) ■ Fume extraction unit Filtercube 4H ■ Hardware and software (including VACAM ‘Machine Edition’) ■ Safety devices (emergency stop cord) Plasma cutting unit HPR260XD Material Mild steel Max. thickness 64 mm Max. pierce capacity 38 mm Dross-free cutting max. 32 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / Air (99,9% pure clean, dry, oil-free) Automatic gas console Yes Cutting speed 6 mm Approx. 4.035 mm / min 130A 12 mm Approx. 3.060 mm / min 200A 25 mm Approx. 1.660 mm / min 260A 38 mm Approx. 890 mm / min 260A 50 mm Approx. 590 mm / min 260A 64 mm Approx. 195 mm / min 260A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. Oxy-fuel cutting unit Type GCE Fit+ Ignition Automatically Max. thickness 200 mm Gas Propane Optional gas Acetylene Cutting gas O2 Ksdpfx Agsvpagqe Nodu

Year of construction: 2010, condition: ready for operation (used), Max. sheet dimensions: 6050x2550mm, max. cutting speed: 10m/min, length: 8125mm, width: 3800mm, height: 1900mm, with documentation, an on-site inspection is possible. Ksdpfx Aori Skajg Nodu

Condition: ready for operation (used), A Zinser plasma torch cutting system is available. Table dimensions X/Y: 2000mm/6000mm, plasma attachment: Hypertherm HPR260, extraction system: Donaldson, draw channel length: 10m. Including various spare parts for the burner head. The automatic gas console is defective. Documentation available. On-site inspection is possible. Kdodpfx Aovamq Dog Neu