Used Cnc School Maschine for sale (10,395)

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 75 mm, turning length: 325 mm, turning diameter: 180 mm, travel distance X-axis: 56 mm, travel distance Z-axis: 176 mm, TECHNICAL DETAILS Swinging diameter over bed: 180 mm Swinging diameter over cross slide: 75 mm Turning length: 325 mm Travel in X-axis: 56 mm Travel in Z-axis: 176 mm Spindle speed range: 20 - 6,300 rpm Spindle bearing diameter in the front bearing: 50 mm Feed force in Z-direction max.: 3,000 N Spindle bore: 30 mm MACHINE DETAILS Control: Fanuc 21T Main spindle power max.: 3.7 kW Voltage: 400 V Godszb Ekcspfx Anlouc Frequency: 50-60 Hz Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,620 mm Machine weight approx.: 1 t EQUIPMENT Automatic chuck Various accessories Interface for bar feeder

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: W261, repeat accuracy: 0.05 mm, workpiece weight (max.): 6,300 kg, working length: 4,000 mm, working width: 2,250 mm, working height: 230 mm, No minimum price – guaranteed sale to the highest bidder! The machine’s last inspection was carried out by a specialist company at the end of 2025! The machine can be inspected while powered on. TECHNICAL DETAILS Working area X: 4,000 mm Working area Y: 2,250 mm Working area Z: 230 mm Working area for round part machining, diameter max.: 440 mm Gjdpezcwupefx Anljuc Working area for round part machining, length max.: 3,700 mm Number of cutting heads: 1 to 4 Cutting carriage distance: max. 1,150 mm Positioning speed, axis-parallel X, Y max.: 60 m/min Positioning speed, simultaneous max.: 84 m/min Cutting speed max.: 50 m/min Travel speed min.: 0.001 m/min Machine tolerance according to VDI/DGQ 3441: ± 0.1 mm/axis Repeatability: ± 0.05 mm/axis Load capacity of the frame max.: 7,000 kg Load capacity per grating bar: 110 kg Number of grating bars max.: 70 Workpiece weight, flat part max.: 6,300 kg Workpiece weight, round part max.: 500 kg MACHINE DETAILS Waterjet source: Bypump 50 APC Operating pressure: max. 3,800 bar Flow rate: 0 to 5 l/min Nozzle size in single-head operation: max. Ø 0.4 mm Nozzle size in dual-head operation: max. Ø 0.3 mm Nozzle size in dual-head operation: recommended Ø 0.28 mm Dimensions & Weight Machine dimensions (L x W x H): approx. 9,000 mm x 7,550 mm x 2,050 mm Weight: approx. 10,000 kg Operating Hours Operating hours: approx. 41,130 h Cutting hours Head 1 / Head 2: 13,720 h / 956 h EQUIPMENT CNC rotary axis Motorized cutting carriage distance adjustment Four-jaw chuck Abrasive hopper Spare parts PC with pre-installed programming software Note: The second head has been removed, and the cutting mechanism has been mounted on Head 1 as a spare part. However, after acquiring a new cutting head, the system can operate with two abrasive tools. The drilling spindle is seized. The crane and lifting device are not included in the scope of sale.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 43,196 h, functionality: fully functional, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, controller model: Fanuc 310 is, spindle speed (max.): 5,000 rpm, counter spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! CNC turning center with comprehensive accessories! A wide range of like-new spare parts is also available! TECHNICAL DETAILS Travel X1 axis: 165 mm Travel X2 axis: 165 mm Travel Y1 axis: 80 (+50 / -30) mm Travel Z1 axis: 678 mm Travel Z2 axis: 640 mm Travel W2 axis: 690 mm Rapid traverse X/Y/Z/W axis: 30 m/min Acceleration X/Y/Z/W axis: 5 m/s² Main and counter spindle Power main spindle: 20 / 25 kW Power counter spindle: 17 kW Speed main spindle max.: 5,000 rpm Speed counter spindle max.: 5,000 rpm Bar diameter main spindle max.: 65 mm Bar diameter counter spindle max.: 45 mm Number of turrets: 2 Number of rotating tools per station: 12 driven positions Tool system: VDI 30 Speed driven tools: max. 4,000 rpm MACHINE DETAILS Control: Fanuc 310 is Coolant tank capacity: approx. 650 l Gedpfxoza Alhj Anljuc Coolant pump capacity per turret: max. 20 l/min Pump pressure: 7 bar Connected power: 91 kVA Dimensions & Weight Machine dimensions (L x W x H): 4,500 x 1,990 x 2,300 mm Machine weight: approx. 9,500 kg Operating hours Power-on hours: 64,274 h Operating hours: 43,196 h EQUIPMENT IEMCA MASTER 865 MP 43 L bar loader Drive for slides 1 and 2, all 12 positions C-axis for main and counter spindle Y-axis for slide 1 Chip conveyor, belt type Counter spindle collet cleaning with coolant Workpiece discharge including belt Mechanical preparation for oil mist filter Electrical and software interface for bar loader Angular synchronization between main and counter spindle Automatic machine shutdown 2 additional inputs/outputs, 4 M-functions Thread drilling without compensation chuck Piece and time counter Software for polygonal turning for slides 1 and 2 Constant cutting speed Helical interpolation for slide 1 Spindle speed monitoring Four-color warning light Cooling unit for control cabinet Collet chuck type MPF 65/140 without axial feed for main spindle, max. diameter 65 mm Manual collet changer type SACO MPT65/140 and MPF65/140 Differential pressure for counter spindle with the possibility of setting two different clamping pressures 1 set of soft jaws for collet chuck type SMW 175-BBD Collet chuck type SMW 175-BBD for counter spindle including adapter for spindle adjustment Tool wear monitoring system for CNC FANUC Sister tool selection system for Tool Monitor CNC FANUC External flushing of jaws and collets with coolant on main and counter spindle

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Godpfx Aszb Ipzenlsuc Z axis travel 1650mm 1750 mm between centres Coolant pump and tank

Condition: used, Year of construction: 2025, functionality: unexamined, Homag Centateq P110 PROFI BMG110/3115/F/K CNC machining centre (2025) with  Almig Combi XP15 receiver mounted air compressor (2025) Air Plants Dust Extraction Ltd dust extraction system (2025) Guodpozc Rzpsfx Anlsc

Year of construction: 2018, condition: used, functionality: unexamined, Sasso K500 CNC bridge saw (2018) Gujdpfx Anszc Rgrolsc 3 axis Also available from the same location - Bellani Modulo edge polisher (2010)

Condition: excellent (used), Year of construction: 2018, 2018 Haas ST-25 CNC Slant Bed Lathe Samchully MH-212 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Swing Over Tailstock Ø584mm Maximum Cutting (Varies With Turret) Ø381mm. Maximum Cutting Length (Without Workholding) 826mm. Bar Capacity Ø102mm. Distance Between Centre 762mm. Axis Traverses 'X'=318mm, 'Z'=660mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,200rpm (29.8kW Motor). Spindle Nose A2-8. 12 Station Turret. S/No. 3112177 (2018). With Coolant System (Tank Capacity 208L), Tool Setting Arm, Tailstock, Jorgensen Chip Conveyor, Footswitch & Signal Tower. Gusdjzc Id Uepfx Anloc

Condition: excellent (used), Year of construction: 2008, turning diameter over cross slide: 530 mm, turning length: 2,500 mm, turning diameter: 900 mm, spindle bore: 280 mm, spindle speed (max.): 1,120 rpm, spindle speed (min.): 1 rpm, turning diameter over top slide: 530 mm, chuck outer diameter: 600 mm, Weiler CNC Hollow Spindle Lathe Model: E-90 Control: Siemens Year: 2008 Swing Over Bed: 900mm Gsdpfxezbhc Io Anlsuc Swing Over Top Slide: 530mm Distance Between Centres: 2500mm Spindle Bore: 280mm Spindle Speeds: 1-1120 RPM Machine With: 4 Way Auto Indexing Tool Post 600mm Front 3 Jaw Power Chuck 600mm Rear 4 Jaw Manual Chuck 2 Fixed Steadies Various Tooling

Condition: good (used), Year of construction: 2000, functionality: fully functional, Ge Fanuc control 3 jaw 10 inch Pratt and Barnet manual chuck Gjdpfezakk Eex Anlsuc 10HP spindle Quick change tool post Tailstock Coolant tank and tray 6 tool holders

Condition: used, Year of construction: 1990, functionality: fully functional, Fanuc OT control 3 jaw Kitagawa chuck 620mm swing 1000mm between centres Gusdpozakgtofx Anlec 10 station turret Tailstock Coolant pump and tank Swarf conveyor

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 12020, Fanuc 21i TB control Gjdpfx Ajzaix Ienleuc 3 jaw SMW chuck 720mm swing 2000mm between centres 8 station turret Coolant pump and tank Swarf conveyor

Condition: used, Year of construction: 2012, Mazak Variaxis 500-5X II 5 Axis CNC Machining Centre with Mazatrol Matrix Control. S/No. 244505 (2012) 500mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 500mm Diameter x 405mm x 300kg, 40 Tool ATC, CAT40 Spindle Taper, Kouwa Spindle Chiller Unit, Cromar Swarf Management and Filtration System, OMF 1000 Oil Mist Filter Extraction, Renishaw RMI Tooleye, Machine Weight 7500kg. Country of Origin: Japan Gsdpfx Anszcpclslouc Please Note: Erowa Machining Fixture Not Included Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2015, Mazak Variaxis i-500 5 Axis CNC Machining Centre with Mazatol Matrix 2 Control. S/No. 259047 (2015), 500mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 500mm Diameter x 350mm, Max Workpiece Weight 300kg, CAT40 Spindle Taper, 40 Tool ATC, Mazak Spindle Chiller Unit, Vokes Air Scandmist 70D Oil Mist, Filter Extractor, Cromar Swarf Managment and Filtration System, Renishaw RMI - Q Tool Eye, Machine Weight 8000kg Gujdpfjzcn Imjx Anlsc Please Note: Erowa Machining Fixture Not Included Lot 5 of Auction 3476. Visit cottandco website for more details. Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2017, Maximum turning diameter 300mm, maximum turning length 510mm, spindle speed 6,000rpm, milling speed 6,000rpm, sub-spindle speed 6,000rpm, main spindle bar capacity 42mm, 2 X 12 station turrets, spindle power 11Kw, Guodpfozcy S Rsx Anlsc Y axis + /- 32mm, swarf conveyor, coolant., Fanuc OI-TF. barfeed unit.

Condition: good (used), Year of construction: 2015, Maximum turning diameter 255mm, Gsdpfszcy Iljx Anlsuc distance between collet chucks 639mm, swing over bed 270mm, spindle speed 4,000rpm, milling speed 6,000rpm, sub-spindle speed 5,000rpm, main spindle bar capacity 66mm, sub spindle bar capacity 52mm, 3 X 12 station turrets, spindle power 15Kw, Y axis + /- 40mm, swarf conveyor, coolant., Fanuc 31i.

Condition: good (used), Year of construction: 2006, 510mm swing, Gujdpfszcwz Njx Anlec 320mm max. machining diameter, 525mm max turned length, 4000rpm spindle, 65mm bar capacity, 12 station turret, 15W spindle motor, FANUC Oi control, collet chuck, Tool setter Tailstock, Parts Catcher, Swarf Conveyor, Coolant

Condition: good (used), Year of construction: 2012, maximum machining diameter 380mm, maximum machining length 508mm, bar capacity 74mm, spindle speed 4,000rpm, spindle power 18.5Kw, milling speed 4,500rpm, Gsdpszaz Uzefx Anlouc milling power10Kw, sub-spindle speed 6,000rpm, sub-spindle power 5.5Kw, Y axis -51/+51mm, 12 station turret, Mazatrol Matrix Nexus control, swarf conveyor, parts catcher , tool setter, 3 jaw chuck and Barfeed unit.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, conveyor belt length: 3,100 mm, conveyor belt width: 2,200 mm, total length: 3,100 mm, total width: 2,200 mm, power: 3 kW (4.08 HP), We offer this very good Blackman and White Versatech Cutting Machine, year of construction 2017. 2.2 x 3.1mtr conveyorised bed, with on board 3kw water cooled router and drag knife, with iCut camera registration system. Can be seen fully working and tested in Leicester UK. Price is ex works, we can put you in touch with the engineer who will provide a seperate and direct cost to move the machine. Gjdpfx Aex Ik Dconleuc If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, ESAB Alpharex AXD 5 axis Gantry Laser- 5KW Trumpf Resonator- Year 2007. Gedpfozc Nzujx Anlouc 26 metres x 5900mm Table. Bevel cutting. Max 25mm Thickness.

Condition: good (used), Year of construction: 2004, functionality: fully functional, PEDDINGHAUS TDK 1000/9 DRILLING MACHINE 9 SPINDLES MAXIMUM PROFILE 1000 X 420mm MEBA 1020 DGP SAWING MACHINE cutting diameter: 510 mm capacity 90 degrees: round: 510 mm capacity 90 degrees: flat: 1020 x 510 mm Gsdpfezc I Iysx Anljuc capacity 60 degrees: round: 500 (400) mm capacity 60 degrees: flat: 500 (400) x 510 mm capacity 45 degrees: round: 510 mm capacity 45 degrees: flat: 750 (670) x 510 mm

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 09.05.T rev 03, Mecal MC309 Nike. In working order Godpfszcfrcox Anlsuc

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kaltenbach KDS 615 / KBS 750 CNC Drilling / Sawing Line – Year 2010. Gedpezcqmxjfx Anlouc 3 Spindles. Automatic Tool Changer. Hard Stamping. Gripper feed. 16 metres Infeed. 16 metres Outfeed. Infeed and Outfeed Cross Transfers. KALTENBACH KDS 615 3 axes CNC drilling machine KDS 615: Drilling spindle speed range 100 - 2500 rpm Drilling spindle drive power x 15 kW Total drill length. 160 - 460 mm Drill feed range 40 - 1000 mm/min Work piece width: 620 mm Workpiece height: 440 mm Drill diameter: 10 - 40 mm Number of drill axes: 3 KALTENBACH KBS750 Working range 90° 750 x 500 mm Working range 60° 650 x 500 mm Working range 45° 520 x 500 mm Working range 30° 390 x 500 mm Drive power5,5 kW

Condition: good (used), Year of construction: 2011, 575mm centre height, Gjdoy U Numjpfx Anlouc 3000mm between centres, maximum cutting diameter 950mm, FANUC 21iTB, 230mm spindle bore, 22/26kW motor power, 7-400 rpm spindle speed, 12 station turret, steady, 4 jaw chuck, swarf conveyor

Condition: like new (used), Year of construction: 2018, Swing over bed 641mm, 229mm max. machining diameter, 356mm cutting length, 6000rpm spindle, Gedpoy U Hpbsfx Anlsuc 44mm bar capacity, 12 station turret, 11.2kW spindle motor, +/-50mm Y axis, C axis & Milling, HAAS control, 3 jaw chuck, coolant, Tool Setter,

Condition: excellent (used), Year of construction: 2012, Operating range V808 Min. / max. height 10 – 500 mm1 Min. / max. width 60 – 1.250 mm Max. positioning weight 13.200 kg Min. material length 1.200 mm Max. cutting width at the bottom 800 mm (only plasma marking and cutting) Plasma cutting unit* Hypertherm HPR260XD Virtually dross-free cutting max. 32 mm Gusdszcfpzspfx Anlsc Marking lines Yes, marking and cutting with the same consumables Plasma gas mild steel O2 (99,9% pure clean, dry, oil-free) Shield gas mild steel O2/air (99,9% pure clean, dry, oil-free) Cutting speed 12 mm Approx. 3850 mm/min., 260A Cutting speed 20 mm Approx. 2170 mm/min., 260A Cutting speed 32 mm Approx. 1135 mm/min.; 260 A Fuse Additional 75 A slow is required Plasma Gas O2 (99,9% pure clean, dry, oil-free) Consumption 80l/min System pressure 10 bar * grounding, max. 6m of machine: AC power, PE, and service grounds must be connected to all equipment according to local and national codes. Oxy-Fuel cutting unit Gas supply Magnetic valve with back-fire protection Ignition Automatically Gas Acetylene Consumption 20l/ min System pressure 2 bar Cutting Gas O2 Consumption 450l/ min System pressure 10 bar Operational direction From right to left Profiles 1 Flat steel Angles European standard channels (UNP) European I-beams (IPE) European standard beams (IPN) European wide flange beams (HE) British universal beams (UB) British universal columns (UC) Square tubes 1 Small profiles have to be sufficient straight. General Voltage Stabilizer Not included Ambient temperature 0 - 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)