Used Coil for sale (1,380)

Condition: used, Manufacturer: UNIMAN Load capacity: 9000 kg Ljdpfx As Adqbhob Nsah Travel range: 400–2050 mm

Condition: used, Year of construction: 2016, functionality: fully functional, BAC VXC S455 evaporative condenser, R134a Used 5 units Baltimore Aircoil International (BAC) VXC S455 evaporative condenser, built 2015, serial number H150832701. Made in Heist-op-den-Berg, Belgium. It is an evaporative condenser: hot refrigerant vapour enters the coils inside the unit, water is sprayed over the coil surface, and centrifugal fans draw air through the pack. The refrigerant condenses and returns to the refrigeration plant. No separate water-cooled condenser is required on the chiller. The unit has twin R134a heat-exchanger coils (circuits A and B) and a centrifugal fan section. It was installed on a rooftop as the heat-rejection side of a refrigeration / chilled-water plant. Manufacturer: Baltimore Aircoil International nv Model: VXC S455 Serial number: H150832701 Year of manufacture: 2015 Type: induced-draft evaporative condenser Vessel type code: PED C100 Refrigerant: R134a Coil volume: 932 L per coil (A and B) Design pressure: −1 / 23 bar Test pressure: 34 bar Design temperature: −20 / +120 °C Ledpfszz Sidox Ab Noah Fan overall efficiency (nameplate): 59.05% Marking: CE BAC catalogue figures for VXC S455 Base heat rejection: approx. 1,961 kW Operating weight: approx. 11,270 kg Shipping weight: approx. 8,125 kg Dimensions: approx. 5,385 × 2,397 × 4,248 mm Air flow: approx. 34.9 m³/s Fan motor: 1 × 30 kW Spray water: approx. 38.5 l/s, pump 1 × 4 kW Application Heat rejection for industrial chillers and refrigeration plants on R134a. A natural match for the Star Refrigeration package water chillers (contract 100663, 840 kg R134a charge): discharge gas goes to the BAC coils, liquid returns to the chiller. Condition and sale Used industrial equipment, removed / being removed from site. Price on request. Can be sold with the Star chillers or as a standalone condenser. Model, serial number and pressures are taken from the factory plates; actual capacity at the new site depends on condensing temperature and ambient wet bulb.

Condition: excellent (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, coil weight: 2,000 kg, coil outer diameter: 1,500 mm, coil inner diameter: 508 mm, spreading range: 900 mm, Dimeco Coil Pick & Tilt Coil Handler Machine Type: Coil Pick & Tilt Handler Model: Coil Pick & Tilt 20 1500 250 Year: 2023 Hours: 10hrs Condition: Excellent Description Ljdpou Nx Nzsfx Ab Neah Electric Powered Truck Specifically Designed For Coil Handling – No manual operation. – Coil tilting is fully controlled safety is improved. – Truck is able to pick up coil from a standard wooden pallet. Technical Specifications Max Coil Weight: 2000kg External Ø (Max): 1500mm External Ø (Min): 600mm Width: 250mm Internal Ø: 508mm Max Height of Forks: 1300mm Forks Thickness: 40mm Distance Between Forks(Open): 1610mm Distance Between Forks(Closed): 610mm Truck Weight: 1365kg Notes: *Specifications are given in good faith but not guaranteed*

Year of construction: 2021, condition: like new (used), functionality: fully functional, Component 1: ATM-800 P Tangential Dereeler (2 pieces) Heavy-duty dereeler for controlled unwinding of copper wire coils. • Max. coil diameter: 800 mm • Max. coil width: 300 mm • Pickup hole: Ø52 / Ø56 mm • Max. coil weight: 300 kg • Braking force: 100 - 2000 N Laedpfx Absz Ap R Io Njh • Brake torque: 3 - 800 Nm • Max. speed: approx. 5 rpm • PLC control with torque sensor Component 2: HBK-40-S Automatic Taping Machine Professional automatic taping machine for coil and conductor insulation. • Servo-controlled taping head • Operator terminal and display • Integrated X-axis guidance • Electric hysteresis brake • Automatic overlap control via encoder • Suitable for various insulation materials

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, outer diameter: 1,600 mm, total height: 1,600 mm, total length: 1,400 mm, total width: 800 mm, inner diameter: 470 mm, input voltage: 400 V, overall weight: 850 kg, Equipment: documentation/manual, Year of manufacture: 2009 Load capacity: 1500 kg Coil inner diameter: 470 - 630 mm Coil outer diameter: 1600 mm Lsdpfx Aez Riz Isb Njah Speed: 12 revolutions/min Frequency inverter Dimensions: approx. 1.7 x 1.4 x 1.7 m Weight: 850 kg Original documentation included, ready for immediate use.

Condition: used, axle configuration: 3 axles, first registration: 01/2020, color: other, Year of construction: 2020 Empty weight: 7.020 kg Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm Lsdpfxszuwkme Ab Neah

Condition: used, axle configuration: 3 axles, first registration: 06/2016, color: other, Year of construction: 2016 Ledpfjy Ipapsx Ab Nsah Empty weight: 7.045 kg Axle 1: left 8 mm right 8 mm Axle 2: left 6 mm right 6 mm Axle 3: left 12 mm right 12 mm

Condition: excellent (used), first registration: 09/2008, loading space length: 13,600 mm, loading space height: 2,750 mm, color: other, Year of construction: 2008 Lsdpfxszzq Tzs Ab Nsah Empty weight: 7.300 kg Carrying capacity: 31.700 kg GVW: 39.000 kg Technical condition: very good Visual appearance: very good Registration number: QACB671 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, axle configuration: 3 axles, first registration: 03/2017, color: other, Year of construction: 2017 Empty weight: 7.155 kg Ledpfx Abey Ipacj Nsah Axle 1: left 12 mm right12 mm Axle 2: left 6 mm right 6 mm Axle 3: left 8mm right 8 mm

Condition: new, Year of construction: 2025, functionality: fully functional, coil outer diameter: 1,500 mm, coil inner diameter: 508 mm, product height (max.): 200 mm, feed length X-axis: 1,520 mm, feed length Y-axis: 3,020 mm, feed length Z-axis: 80 mm, warranty duration: 24 months, total height: 2,380 mm, total length: 8,900 mm, total width: 2,300 mm, load capacity: 1,300 kg, input frequency: 50 Hz, input voltage: 380 V, overall weight: 180 kg, repeat accuracy: 0.02 mm, workpiece weight (max.): 15,000 kg, Equipment: cooling unit, GS-J Series has various workbench sizes such as 3015, 4015, 4020, 6015 to meet different processing needs Suitable for batch processing of thin plates with high flatness requirements of 0.6-3.0mm Uncoiling machine parameters: Maximum weight of coil (kg): 15000 Coil width (mm): 200～1524 Coil outer diameter (mm): Φ800～Φ1500 Coil inner diameter (mm): Φ508mm~Φ610mm (cast iron pad) Coil thickness: (mm) 0.6-2.0mm (stainless steel) ≤1524mm 0.8-3.0mm (carbon steel) ≤1524mm Feeding length (mm): 0～ Maximum stroke of equipment Unwinding speed (m/min): 0～15 Moving speed (mm/s): 0-8 Lifting speed (mm/s): 3.0 Lsdpfxev Awguo Ab Neah Lifting stroke (mm) : 350 Leveling flatness (mm/㎡): ≤±3 Fixed feeding line height (mm) : 870 Sizing accuracy (mm/m) : Length direction ≤±0.2 Diagonal direction : ≤±0.8 Revolutionize Your Coil Processing with One Machine, Five Functions! Uncoiling, leveling, feeding, cutting, and blanking – all in one seamless automated system for maximum efficiency. Smart, Flexible & Versatile - Effortlessly cuts special-shaped workpieces, adapting to diverse production needs - Optional touchscreen control with top-tier international cutting systems - High-quality drag chain cables – durable, bend-resistant, and interference-free

Condition: used, axle configuration: 3 axles, first registration: 06/2019, color: other, Year of construction: 2019 Empty weight: 7.020 kg Laedpeza T Iaofx Ab Nsh Axle 1: left 8 mm right 8 mm Axle 2: left 6 mm right 6 mm Axle 3: left 8 mm right 8 mm

Condition: excellent (used), Year of construction: 1976, Sheet width - max.: 200 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Driven infeed and outfeed rollers Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 2.0 mm Weight: 170 kg Infinitely variable feed speed Right and left rotation Operating mode selector switch for manual and automatic operation Belt loop control Good working condition Laodpfx Abs Aa Dnyo Nsh A decoiler can also be purchased.

Condition: used, axle configuration: 3 axles, first registration: 03/2017, color: other, Year of construction: 2017 Empty weight: 7.140 kg Axle 1: left 8 mm right 6 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm Lasdpjzmu N Dofx Ab Nsh

Condition: used, Rotating device Lodpfjzil R Rsx Ab Njah Gunter Seibold rotating device for HTS coils – continuously variable drive (Type S05082) Description: Professional rotating device for holding and rotating HTS coils with winding cores. Developed for the uniform distribution of two-component resin during the curing process. Ideal for development, laboratory, or production environments with high-temperature superconductor coils. The winding form is electrically heated; the power supply is directly connected to the form (not included in the scope of delivery). The machine impresses with its precise control, ease of operation, and service-friendly design. Technical features Solid machine stand: Welded square tube construction with adjusting screws and floor anchors Drive: Three-phase planetary gearbox motor (11 kW, 400 V, 50 Hz, 3 phases) Continuously variable speed (0.2 – 100 min⁻¹) Soft start & soft stop via frequency inverter (4-quadrant controller) Electromagnetic spring force brake (safe stopping in case of power failure) Rotating direction can be switched left / right Control panel: 5.7" touch panel for setting speed, direction, ramps, time, or number of revolutions Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrical system & control cabinet: Control integrated in the machine stand 400 V / 230 V power supply, 24 V DC control voltage Circuit breaker, RCD protection 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with air conditioning unit Complete grounding & static discharge of the main shaft Adjustable work area light (swivel and height adjustable) Feature / Value Max. coil diameter 1,500 mm Coil passage 1,700 mm Center height above floor 1,100 mm Max. load on turntable 500 kg Turntable Ø 600 mm, 4 T-slots (DIN 650) Speed range 0.2 – 100 min⁻¹ (continuously variable) Torque 775 – 539 Nm Operating voltage 400 V / 50 Hz Control voltage 24 V DC Connected power 11 kW Connected current 32 A Color scheme (according to RAL) Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / control cabinet: Light gray (RAL 7035 / 5010) Weight: approx. 1800-2000 kg Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Used Ardeth Engineering approximately 70,524 litre total capacity (approximately 50,000 litre working capacity product dependent) stainless steel vertical reactor vessel. Unit has welded dished top and bottom heads. Internal rated 8 bar/full vacuum design pressure at 350 deg.c. External limpet coil jacket rated 8 bar/full vacuum at 350 deg.c. Internal coil rated 8 bar/full vacuum at 350 deg.c. Unit includes top entry stainless steel 2-tier, 4-blade agitator with bottom mounted steady bearing. Agitator driven by Hagglunds type SM CB 2000 hydraulic drive. Reactor is mounted on (4) mild steel side support lugs. Specifications: Lsdpfx Aszfifdsb Nsah Capacity: 70,000 L Internal Pressure: 8 bar Internal Temperature: 350°C Jacket Pressure: 8 bar Jacket Temperature: 350°C Legs/Lugs/Mounting Ring: Lugs

Condition: used, Used approximately 13,400 litre Inox-Maurer AG stainless steel reactor body. Unit has an approximately 770 litre external coil. Unit is rated 2.0 / -1bar internal operating at 200degC. External coil is rated 16.0bar operating at 200degC. Unit has an internal material of construction of 1.4435 and external coil of 1.4306. Specifications: Capacity: 13,400 L Internal Pressure: 2 bar Internal Temperature: 200°C Jacket Pressure: 16 bar Jacket Temperature: 200°C Laodpfx Abjy Ryrno Noh Legs/Lugs/Mounting Ring: Mounting Ring

Condition: used, CARBONINI SIZER 1500 RNTPC – Year 2008 General Information Manufacturer: CARBONINI S.r.l. – Italy Model: SIZER 1500 RNTPC Year of manufacture: 2008 (as indicated on the CE identification plate) Weight: 5,500 kg (as indicated on the identification plate) CNC Control System: MicroVision Lajdpfe Ad I D Hex Ab Noh Machine Type: Automatic coil-fed sheet metal cut-to-length line, 1,500 × 1.2 mm, suitable for sheet thicknesses from 0.6 to 1.2 mm. Machine Description The CARBONINI SIZER 1500 RNTPC is an automatic coil-fed sheet metal cut-to-length line designed to process metal coils through unwinding, straightening, automatic feeding and transverse cutting to the required length. It is particularly suitable for the production of sheet metal components used in air conditioning, ventilation and air handling systems (HVAC industry). The line produces sheet metal blanks cut to programmable lengths, with electronic control of dimensions and production quantities through the MicroVision CNC control system. The system consists of several processing units that perform the different production stages directly from the metal coil. Line Configuration The cut-to-length line consists of the following operating units: 1. Gantry-Type Coil Decoiler Designed to support and unwind sheet metal coils, continuously feeding the material into the subsequent processing units. 2. Sheet Metal Straightening Unit Equipped with a series of rollers designed to correct bends and deformations caused by coil winding, ensuring material flatness before cutting. 3. Double Rectangular Notching Unit Allows rectangular notching operations on the sheet metal, depending on the installed configuration. 4. Transverse Shearing Unit Automatically cuts the sheet metal to the length programmed by the operator, producing blanks with preset dimensions. Technical Specifications Maximum working width: 1,500 mm Minimum sheet thickness: 0.6 mm (6/10) Maximum sheet thickness: 1.2 mm (12/10) Control system: MicroVision CNC Overall Dimensions and Weight Overall length: 7,000 mm Overall width: 2,400 mm Weight: 5,500 kg CE marking: Present

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, High-strength welding bed Partitioned smoke extraction system Lajdpew A Iiljfx Ab Njh Fully automatic butter injection system Fully automatic cutting, material saving, fast speed Cutting area 4000 × 2000 mm X‑axis travel 1520 mm Y‑axis travel 4020 mm Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Acceleration 2.8 G Machine dimensions (L×W×H) 9500 × 2900 × 2380 mm Footprint 10500 × 3400 mm Net weight 8500 kg

Condition: used, Unwinding reel for coil material DREHER - DIMECO, Type 2370 BF Model 653, Year of manufacture 1979 Coil weight, max. 2000 kg Coil width, max. 320 mm Coil width with guide arms, max. 320 mm Lodpfxez R D Sns Ab Noah Coil width without guide arms, max. 480 mm Coil inner diameter 340-540 mm Reel shaft, support shaft, Ø 90 mm - Central spreading adjustment of the reel crown via hand crank (square shaft 24 mm) - Mechanical brake on the reel shaft with manual brake force adjustment via hand crank - 6 pcs. coil guide arms 500 mm, with toggle clamp - Conversion to motor drive possible, motor mount available, sprocket for roller chain on the reel shaft available Footprint: Width: 170 cm x Depth: 138 cm x Height: 160 cm Space required for transport: Width: 78 cm x Depth: 138 cm x Height: 120 cm Weight 430 kg Good condition

Condition: used, empty load weight: 7,610 kg, maximum load weight: 33,390 kg, overall weight: 41,000 kg, axle configuration: > 3 axles, first registration: 01/2015, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 89 m³, total length: 13,620 mm, suspension: air, tire size: 385/65 22,5, tire condition: 50 %, color: blue, Year of construction: 2014, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Vehicle number for inquiries: 41781 Krone, SD * Year of manufacture: 2014 * ABS, Anti-lock Braking System * EBS, electronic braking system * Air suspension * Used tarpaulin * Edscha / sliding roof cover * Load securing certificate DIN EN 12642 Code XL Ljdpfxs Adnw Ts Ab Njah * Lashing eyelets in the outer frame (Multilock outer frame) * Portal door * Aluminum side guards * Air connection coupling head (red + yellow) * Spare wheel holder * Connection plug 2x7-pole * Connection plug 15-pole * Lifting and lowering device * Storage box / toolbox * Document box * Suitable for rail transport - can be loaded by crane * Coil well * Suspension: Air * Gross weight: 41,000 kg * Unladen weight: 7,610 kg * Payload: 33,390 kg * Permissible gross weight: 41,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 40% - 40% - Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 70% - 40% - Tire size: 385/65 R22.5 * Tire condition, 3rd axle: 50% - 40% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L = 13,620 mm, W = 2,480 mm, H = 2,650 mm * Internal volume: 90 m³ * Pallet spaces: 34 * On request, we will send you a video and further images. Disclaimer: Subject to changes, prior sale, and errors. You can find more pictures and videos on our homepage. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please ask our trained specialist staff, we will be happy to advise you.

Condition: good (used), axle configuration: 3 axles, first registration: 02/2017, loading space length: 13,650 mm, loading space width: 2,500 mm, loading space height: 2,750 mm, suspension: air, color: grey, Year of construction: 2017 Make axles: Schmitz Cargobull Empty weight: 7.570 kg Carrying capacity: 31.430 kg Lodpfx Aszutgqjb Njah GVW: 39.000 kg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS = Remarks = Schmitz Cargobull SCB*S3T / Coil / Tautliner / Disc Brakes

Condition: used, axle configuration: 3 axles, first registration: 01/2020, suspension: air, tire size: 385/65 R22.5, color: other, = Additional Options and Accessories = - vehicles.accessories.coil = Additional Information = General Information Year of Construction: 2020 Axle Configuration Tire Size: 385/65 R22.5 Axle Brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear Axle 1: Tire tread depth left: 8 mm; Tire tread depth right: 8 mm Rear Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Rear Axle 3: Tire tread depth left: 8 mm; Tire tread depth right: 9 mm Ledpfxjzxmgxj Ab Nsah Weights Unladen Weight: 6,895 kg Payload: 32,105 kg GVW: 39,000 kg Condition Damage: None

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a high-performance DIMECO LINAPUNCH MC-F CNC coil punching system for the automated processing of strip material directly from the coil. This system is particularly suitable for the economical production of perforated sheets, mounting plates, fastening rails, ventilation components, and customer-specific punched parts in medium to large quantities. Direct processing from the coil significantly reduces material consumption, setup times, and per-piece costs. The LINAPUNCH technology combines the flexibility of a CNC punching machine with the productivity of a continuous coil line. The system operates with standardized thick-turret tools and enables highly productive manufacturing processes. Technical data: Manufacturer: DIMECO Type: LINAPUNCH MC-F Machine type: CNC coil punching system / punching line Control: CNC, Siemens Simostar 370 Coil processing: Coil inner diameter: 508/610 mm Coil outer diameter max.: 1700 mm Coil weight max.: 6000 kg Strip width min./max.: 170 to 525 mm Material thickness: 0.4 to 3 mm Product length max.: 6000 mm Feed length programmable Servo-controlled NC strip feed Automatic strip guidance Punching technology: Punching force: approx. 20 t Multi-axis punching system (X/Y axis) Programmable punching stroke Auto-index function Multi-index function Tool holder for standard thick-turret tools Number of punches: 26 pieces Number of punching heads: 1 piece Number of revolving tool stations: 2 Consisting of: Coil unwinder Leveling unit NC feed LINAPUNCH MC-F punching head Shear Ink marking unit Drop table stacker 2 lifting tables Control panel with CNC control Safety enclosure Application areas: Electrical industry Switchgear construction Ventilation and air conditioning technology Metalworking Profile and component manufacturing Series production from coil material EXW, assistance can be provided with dismantling and loading. Lsdpfszmv Dvox Ab Nsah

Condition: used, axle configuration: 3 axles, first registration: 01/2020, suspension: air, tire size: 385/65 R22.5, color: other, = Additional Options and Accessories = - vehicles.accessories.coil = Further Information = General Information Year of Construction: 2020 Axle Configuration Tire Size: 385/65 R22.5 Axle Brand: SAF Brakes: Disc Brakes Suspension: Air Suspension Rear Axle 1: Tire Tread Depth Left: 8 mm; Tire Tread Depth Right: 6 mm Rear Axle 2: Tire Tread Depth Left: 8 mm; Tire Tread Depth Right: 7 mm Rear Axle 3: Tire Tread Depth Left: 5 mm; Tire Tread Depth Right: 5 mm Lodpfx Abszxmxbo Neah Weights Unladen Weight: 6,895 kg Payload: 32,105 kg GVW: 39,000 kg Condition Damage: None

Condition: used, axle configuration: 3 axles, first registration: 01/2020, suspension: air, tire size: 385/65 R22.5, color: other, = Additional Options and Accessories = - vehicles.accessories.coil = Further Information = General Information Year of Construction: 2020 Axle Configuration Tire Size: 385/65 R22.5 Axle Brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear Axle 1: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Rear Axle 2: Tire tread depth left: 5 mm; Tire tread depth right: 4 mm Rear Axle 3: Tire tread depth left: 9 mm; Tire tread depth right: 9 mm Weights Unladen Weight: 7,000 kg Payload: 32,000 kg Ledezxmtxspfx Ab Nsah GVW: 39,000 kg Condition Damage: None