Coil tec for sale
Identified location: Ashburn (US) (Edit)
|
2
Sheet width: 1000 mm Capacity: 1 t Colour: blue Swtsbl3t 2 pieces in stock Machine is repaired, tested, rupeated by the skilled person and then fully functional. Test run is performed. more
|
|
2
0ax0xwxh width 600mm thickness max 3,5 mm square max 1000mm² hydraulic decoiler4 to with motorised hold down arm loop-controll speed 2-14m/min,pneumatic discbrake, more
|
|
1
2000x0.8 mm, 1.2 mm aluminium, lightweight, with hand roller scissors, Note: Machine is still in the revision, the illustrations were made before the revision. Machine is repaired, tested, rupeated by the skilled person and then fully functional. Test run is performed. without back stop Colour: grey Room requirement: 2300 x 800 x 1010 mm Be8k9o9jze Machine weight: 470 kg with roller scissors more
|
|
1
1250x1.0, 1.0 mm aluminium, without rolling mulde, ideal for Nesections in front of the workbench, tin train from left to right, in very good condition, little used Machine is repaired, tested, loaded by the skilled person and is then fully functional. Test run is carried out. Colour: Blue Bfao288g Machine weight about: 140 kg Room requirement: 1400 x 500 mm more
|
|
2
1000 x 0, 8 mm, 1.0 mm aluminium, mobile, Coilablage,. Hand rolling scissors, adjustable guides for sheet metal intake, weight: 230 kg, colour: Green Dwhjum Machine repaired by a qualified technician, tested, clean and is fully functional. Test run is performed. more
|
|
1
Joanne Tan 2 x, special design, load capacity 300 kg per compartment, with continuous roller Sheet width: 1250 mm Color: grey J8ls8z Dimensions: 870 x 1400 x 750 mm more
|
|
1
3-roller round bending machine with manual drive, Falznut and Drahteinlerillen. Sheet width x thickness 2030 x 1, 0 mm shaft diameter: 75 mm C2fgtfr7 more
|
|
1
heavy duty, commercial length 1020 x 1.5 mm, 2.0 mm aluminum, casting, with stop 0-600 mm, also for mitre cuts with angles to the cutting of unlimited length in the replenishment process, table sizes 600 x 1300 mm Bb7iorclnl The machine was used to test for various purposes and this has some wear. The machine can be considered quite used little. Color: grey/blue Machine weight: 520 kg Space ca: 1400 x 1000 mm Retainer: manual more
|
|
4
Wiener Neudorf, Austria
dealership location
7152 km
new
Maximum coil weight 1250 kg Maximum coil width 400 mm Delivery time approx. 6-8 weeks of order placement Maximum coil weight: 1,250 kg Be9lfxqczf Coil width: 50-400 mm motorized Antriebmechanisch of adjustable Coildorn with 4 BackenSCHNEIDER speed control for unwinding speed and acceleration and delay time photo electrical proximity sensor SICK to the Durchhangkontrollenicht motor with pneumatic brake - on Anfragepneumatischer low mount arm - price on AnfrageDoppelkopfhaspeln, as well as h... more
|
|
1
Mobile, sheet feed direction only from the left, cross cutter with holder and dispenser, with connection tabs to work bench, extra height as bench. Working width 1250 mm 7iudmawrw Steel thickness 1.0 mm Machine weight 230 kg Color Lambert Lifting capacity kg 200 kg more
|
|
|
|
4
Wiener Neudorf, Austria
dealership location
7152 km
new
Maximum coil weight 2500 kg Be9lgksobh Maximum coil width 400 mm Delivery time approx. 6-8 weeks of order placement Maximum coil weight: 2,500 kg Coil width: 50-400 mm motorized Antriebmechanisch of adjustable Coildorn with 4 BackenSCHNEIDER speed control for unwinding speed and acceleration and delay time photo electrical proximity sensor SICK to the Durchhangkontrollenicht motor with pneumatic brake - on Anfragepneumatischer low mount arm - price on AnfrageDoppelkopfhaspeln, as well as h... more
|
|
1
Stack frame-heavy Ausfuehrung-technical Data: Width: 1000 mm carrying capacity: 3000 kg stack racks heavy Ausfuehrung-width: 1000 mm carrying capacity: 3000 kg stack frames complete with reel weight: 215 Zo7jpw more
|
|
4
Wiener Neudorf, Austria
dealership location
7152 km
new
Maximum coil weight 4000 kg Maximum coil width 600 mm Delivery time approx. 6-8 weeks of order placement Maximum coil weight: 4,000 kg Coil width: 50-600 mm motorized Antriebmechanisch of adjustable Coildorn with 4 BackenSCHNEIDER speed control for unwinding speed and acceleration and delay time photo electrical proximity sensor SICK to the Durchhangkontrollenicht motor with pneumatic brake - on Anfragepneumatischer low mount arm - price on AnfrageDoppelkopfhaspeln, as well as horizontal ra... more
|
|
1
Stack frame light Ausfuehrung-width: 1000 mm carrying capacity: 1000 kg lightweight design, inner and outer 270/560 mm 5 arms, stack frames complete with reel, 5 arm stack frame reels Weight: 125 kg Ospdkuqg more
|
|
4
Wiener Neudorf, Austria
dealership location
7152 km
new
Maximum coil weight 2500 kg Maximum coil width 600 mm Delivery time approx. 6-8 weeks of order placement Maximum coil weight: 2,500 kg Coil width: 50-600 mm motorized Antriebmechanisch of adjustable Coildorn with 4 BackenSCHNEIDER speed control for unwinding speed and acceleration and delay time photo electrical proximity sensor SICK to the Durchhangkontrollenicht motor with pneumatic brake - on Anfragepneumatischer low mount arm - price on AnfrageDoppelkopfhaspeln, as well as horizontal ra... more
|
|
4
1250 x 1, 0 mm, working width 1250 mm, complete with 3 pairs of blades, with Fyjhlltw Length measuring device with automatic shutoff, with manual cross cutting device, cutting performance with 2 pairs of knives: 1, 0 mm sheet steel, with 3 pairs of knife: 0, 8 mm sheet steel, with rolling unit for small coils, waves strength: 70 mm, with 1 pair rubber transport rollers Total power consumption 230 V Machine weight: 410 kg Cutting speed 10 m / min more
|
|
1
Wiener Neudorf, Austria
dealership location
7152 km
new
Sheet width 600 mm I3emtjb maximum sheet thickness 3 mm Delivery time approx. 6-8 weeks of order placement Sheet width: 600 mm min. sheet thickness: 0.4 mm maximum sheet thickness: 3 mm Max cross section: 600 x 2 mm Roll diameter: 80 mm Engine torque: 10 nm Bevel-helical gear units WATT DRIVE (made in Austria) FESTO PneumatiksystemServoantrieb and control SCHNEIDER ELECTRIC7 "color touchscreen SCHNEIDER ELECTRIC4 roller drive for higher accuracy during the EntlüftensVorschubgeschwindig... more
|
|
4
1250 x 2 mm, solid cast iron construction, upper roller forward hinged, with conical bending device, with Falznut and Drahteinlegerille, to bend 1,2 mm,. Machine weight approx. 430 kg, shaft diameter 75 mm Barln3yw more
|
|
1
Wiener Neudorf, Austria
dealership location
7152 km
new
Sheet width 300 mm maximum sheet thickness 3 mm Be9ldux2m8 Delivery time approx. 6-8 weeks of order placement Sheet width: 300 mm min. sheet thickness: 0.4 mm maximum sheet thickness: 3 mm Max cross section: 300 x 3 mm Roll diameter: 80 mm Engine torque: 8 nm Bevel-helical gear units WATT DRIVE (made in Austria) FESTO PneumatiksystemServoantrieb and control SCHNEIDER ELECTRIC7 "color touchscreen SCHNEIDER ELECTRIC4 roller drive for higher accuracy during the EntlüftensVorschubgeschwind... more
|
|
2
(shared with connection tabs 2 x 3 metres), make Coiltec, mobile,. ideal as a cutting table, approx. 20 mm table top, 6000 x 1000 mm on both sides's angle, with connection tabs to the lengths scissors. Working width 1000 mm Working length 6000 mm Machine weight 150 kg Mtmnx Color Lambert Lifting capacity kg 200 kg more
|
|
1
Wiener Neudorf, Austria
dealership location
7152 km
new
Sheet width 200 mm maximum sheet thickness 4 mm Delivery time approx. 6-8 weeks of order placement Sheet width: 200 mm min. sheet thickness: 0.4 mm maximum sheet thickness: 4 mm Max cross section: 200 x 3 mm Be9ldlgvy7 Roll diameter: 80 mm Engine torque: 8 nm Bevel-helical gear units WATT DRIVE (made in Austria) FESTO PneumatiksystemServoantrieb and control SCHNEIDER ELECTRIC7 "color touchscreen SCHNEIDER ELECTRIC4 roller drive for higher accuracy during the EntlüftensVorschubgeschwind... more
|
|
3
the wheelchair can be placed on the 2 x rolling rack Trolli No. 4455.0. There Fj0rssv2 are then 3 rolling options per 300 kg capacity available. Machine weight: 35 kg Lifting capacity in kg 300 kg Coil width 1000 mm more
|
|
4
Wiener Neudorf, Austria
dealership location
7152 km
new
Maximum coil weight 500 kg Ptzhfa Maximum coil width 300 mm Delivery time approx. 6-8 weeks of order placement Maximum coil weight: 500 kg Coil width: 50-300 mm motorized Antriebmechanisch of adjustable Coildorn with 4 BackenSCHNEIDER speed control for unwinding speed and acceleration and delay time photo electrical proximity sensor SICK to the Durchhangkontrollenicht motor with pneumatic brake - on Anfragepneumatischer low mount arm - price on AnfrageDoppelkopfhaspeln, as well as horizont... more
|
|
4
asymmetrical roller arrangement, crowned turned top roll, swivelling,. Bottom roll through eccentric lever adjustable, with Falznut, Drahteinlegerillen,. Rear roller with ratchet adjustable conical bending device,. L9d3j Gear reducers including base Machine weight approx.: 270 kg Sheet width: 1030 mm Sheet thickness: 1.0 mm more
|
|
1
Wiener Neudorf, Austria
dealership location
7152 km
new
Sheet width 400 mm Nnii9 maximum sheet thickness 3 mm Delivery time approx. 6-8 weeks of order placement Sheet width: 400 mm min. sheet thickness: 0.4 mm maximum sheet thickness: 3 mm Max cross section: 400 x 3 mm Roll diameter: 80 mm Engine torque: 10 nm Bevel-helical gear units WATT DRIVE (made in Austria) FESTO PneumatiksystemServoantrieb and control SCHNEIDER ELECTRIC7 "color touchscreen SCHNEIDER ELECTRIC4 roller drive for higher accuracy during the EntlüftensVorschubgeschwindigke... more
|
|
1
Coilwagen with reel "mobile" width: 1250 mm load capacity: 1000 kg Coilwagen with reel mobile with 4 swivel castors, with brake, with 5 clamping warm. Shaft ball bearings with brake. Clamping arms leaving no fingerprints in the sheet, continuous spindle to the easy open and close clamping no driving out the spindle! Ospk8zao more
|
|
6
Width: 1250 mm capacity: 5000 kg unwinding device for sheet metal coils heavy Ausfuehrung-with chassis and brake. Clamping range: Width 1250 mm capacity: 5000 kg, 4 arms,. 2-stage adjustable to achieve, small inside diameter. Execution. Bnzvt Weight: 230 kg more
|
|
7
Genuine 1769.4 Hours Run Hours 2 x 20 HP Electric Motors Hydraulic Gearbox Shredder Complete with loading conveyor Feed Hopper Full Electrics Safety Eyes Maintenance and installation Manuals All dismantled and ready for re-installation at extra cost Was used for shredding paper, clothing material, cardboard, mattress material and plastics M78wsl Shred Tech Datasheet: Shred Tech ST50 more
|
|
2
Make Thaletec ( D ), Type SZ-0, 4-800, No 633133, New 2011, Material Mild steel, Lining material Glass - Enamel, Vertical pressure tank , Capacity 595 Ltr, Vessel sizes dia.700x800mm, Dished bottom , With cover , Top connections (3x)80mm (1x)100mm, Outlet dia.30mm, Working pressure -1/6 bar, Max. temperature -60/100 Degr.C, Mounted on legs , Floorspace 1,1x1,1 M, Total height 2,2 M, Weight 700 KG, Extra Specifications 596 Liter total volume, vertical, Fabrik Nr. 632133, glass-lined steel, with c... more
|
|
5
working lenght:7200 mm travel -y axis:480 30m/min mm travel -z axis:325 30m/min mm travel -x axis:7200 60m/min mm spindle speed::0 - 6000 1/min cutter diameter max.:80 mm disk milling cutter diameter:200 mm weight of the machine ca.:6,2 t dimensions of the machine ca.:8,6 x 2,3 x 2,2 m Berwzijcm3 more
|
|
1
Description: Suitable for the cleaning of oily and kühlschmierstoff - loop fog. Technical data: Flow rate 1400 m³/h, filter surface 8.5 m², continuous sound pressure level 67 db(A), dimensions CA. 1245 x 628 x 780 mm, connection value 400 V / 50 Hz 0.37 kW, weight ca. 69 kg, light grey color. Ezahi0r Accessories: Silencer. more
|
|
9
Book sewing machine: computer programming device on swivel arm with coloured touch screen automatic investors with SignaLynx sheet control plus stacker with rolling car export - pressure vacuum pump Be99tjsurw more
|
|
9
Leicestershire, United Kingdom
dealership location
5824 km
ready for operation (used)
Serial No. P1206 Capacity 8' x 3/4" / 2438mm x 19mm Length of rolls 97" / 2463mm Roll diameter Top 13 1/4" / 336mm, Bottom 10 3/4" / 273mm X7wdemih Input 380/3/50 AC 25 hp Fitted with right hand drop end Length 15' 10" / 4.82m Width 6' 10" / 2.08m Height 4' 4" / 1.32m Nett weight actual. 8,350 Kgs / 8.22 Tons more
|
|
3
Wood and green waste shredder Cat Engine: 1,800 hours New teeth New 60mm Screen New Batteries S3whc9 New Alternator Full service Ready for work more
|
|
2
Make Thaletec ( D ), Type CE 400-1000-D80, Lining material Glass - Enamel, Closed stirring vessel , Extra Specifications 416 Liter total volume, Fabrik Nr. 633132, glass-lined steel, with Impeller agitator type TRD 125/1, 1 KW-KX, with Interseal lip seal on shaft type ARF-DO-E-LO/40 DVSLA, SEW Eurodrive pneumatic welded top, with bottom outlet valve -1/6 bar, -60/100°C, no jacket, with CE 045 and ATEX ex IIGcT4, , new in 2011 What you can expect from Foeth: all our machines are in working condi... more
|
|
6
Remscheid, Germany
dealership location
6411 km
ready for operation (used)
RMG measuring technology process gas chromatograph type GC 9000 VC , serial number according to photo , used, good condition, 100% functional, supplied with photos Bfghltgud9 more
|
|
5
pressure:6 t Iyvitiv8e throat:300 mm table surface area:400 x 500 mm ram surface:350 x 500 mm weight of the machine ca.:1,6 t dimensions of the machine ca.:1,1 x 1,4 x 2,6 m more
|
|
10
Kaiserslautern, Germany
dealership location
6526 km
1996
ready for operation (used)
General Data Measurements width 6800 mm Measurements depth 3400 mm Measurements height 3300 mm Machine weight 21900 kg Control Unit Giwdmaj Brand Mazak Model Mazatrol M Plus CNC main language German CNC language customizable Yes Main Drive Number of spindles 1 Spindle speed range 15000 rpm Movement X-Axis Movement 1050 mm Y-Axis Movement 800 mm Z-Axis Movement 825 mm Workpiece Workpiece drm 1050 mm Workpiece X 1000 mm Workpiece Y 1000 mm Workpiece Z 1000 mm Workpiece weight 1500 kg Table O... more
|
|
3
Performance: 1,1KW Band length: 2,500 mm horizontal + rising 3,000 mm + 500 mm horizontal Drive: 1.1 kW Frame: Aluminium, mobile with control cabinet Bfgl0u2as9 (Serial number: 9359 / second-hand machine) more
|
|
15
Multi Star S3 Nnkkj Hours: 3500 3 way split Star size 0-20 mm 20-55 mm 55+ mm New belts New stars New chains New wiring Machine is immaculate more
|
|
2
Make Thaletec ( D ), Type BE 2500-1600 AM-D80, Lining material Glass - Enamel, Reactor , Extra Specifications 3.550 Liter total volume, glass-lined steel, with anchor agitator, Agitator Type TRD 300/7,5 kW-ST with 62 rpm, internal P= -1/6 bar, -60/1oo·c, jacket -60/200°C, Fabrik # 631444, new in 2011, with CE 045, and ATEX Zone 1 inside and outside, II2GDcT4, Interseal Lip seal on shaft type ARF-DO-E-LO/80 DVSLA, HEW motor 7,5 kW, SEW drive , with 4 legs What you can expect from Foeth: all our... more
|
|
6
Remscheid, Germany
dealership location
6411 km
ready for operation (used)
Mennekes 364 wall plug 125A-6H/380-415V, used, normal wear, 100% functional, included with com. photos Yr7g9o more
|
|
5
turning diameter:600 turning length:750 mm control:FANUC 18 iTB turning diameter over slide:340 mm turning speeds:2500 1/min turret (x-stations):12 Nlr9p power capacity:22 / 18,5 kW centre distance:750 mm :1 Stck. :89 mm total power requirement:35 kW weight:8,5 t dimensions of the machine ca.:3,30 x 1,90 x 2,4 m CNC turning center, chipconveyor tool eye 3-chaw-juck D = 250 mm 20 sets of chaws more
|
|
15
Kaiserslautern, Germany
dealership location
6526 km
2003
ready for operation (used)
General Data Measurements width 3700 mm Measurements depth 2100 mm Measurements height 2200 mm Control Unit Brand Muratec Model Fanuc CNC CNC main language English Fwz30on Main Drive Spindle speed range 4200 rpm Movement X-Axis Movement 230 mm Y-Axis Movement 100 mm Z-Axis Movement 250/810 Workpiece Workpiece drm 260 mm Workpiece X 170 mm Media Main electronic connection 3 phases 50 Hz 200 Additional Equipment Feeder This Muratec MT20 Lathe was manufactured in the year 2003 in Japan. It ... more
|
|
3
Power: 5.5 kW Suitability: Rubber, plastics Nnibz Inlet: 800 x 200 mm Rotor diameter: 200 mm Width: 880 mm Rotor blades: 3 x Stator: 2 Drive: 5.5 kW (Serial number: 5257 / second-hand machine) more
|
|
6
Hessisch Lichtenau, Germany
dealership location
6567 km
1993
used
Single-hydraulic press HYLATECHNIK Type UHSP 250 [...] 13690 built in 1993 Pressure 250 ton. Pestle retraction force 21 ton. Exoffload 450 mm Table area 1200 x 850 mm Table opening 400 x 250 mm Stößle area 1200 x 600 mm Single tap hole 65 mm Stößelhub 200 mm Built-in height max. 450 mm Table height over corridor 700 mm Cuplift speed Eildownft downhill 275 mm/sec. Lift speed working hub 20 mm/sec. Lift speed rear lift 240 mm/sec. Tank content hydraulics 1000 liters Compressed air requirement 6... more
|
|
2
Make SGL Carbon GmbH Meitingen, Type RS 77-2-19.30.1, No 23371/2, New 1997, Shell material Mild steel, Stainless steel 1.4571 (316Ti), Heat exchanger (1x), Heating surface 5,6 m2, Tube capacity 33 Ltr, Number of tubes: 19, Tube diameter 25mm, Tube length 3000mm, Working pressure tubes vac/6 bar, Max. temperature -10/+175 Degr. C., Shell capacity 100 Ltr, Working pressure shell vac/6 bar, Floorspace 3,8x0,9 M, Weight 350 KG What you can expect from Foeth: all our machines are in working condition... more
|
|
5
Remscheid, Germany
dealership location
6411 km
ready for operation (used)
Adept Technology 10337-15200 servo amplifier control robot Board, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Gvwvko more
|
|
5
material width:650 mm coil weight:3,5 t material thickness:0,8 - 3,5 mm Material thickness at 650 mm material width:3,5 mm Material thickness at 350 mm material width:4,3 mm coil internal diameter:460 - 530 mm coil external diameter:1400 mm no. of straightening rolls:7 straightening roll diameter:80 mm no. of pulling rolls:2+2 roll diameter:80 mm speed:3 - 30 m/min power requirement:8,0 kW weight decoiler:2,6 t dimensions decoiler (WxDxH):2,6 x 1,9 x 2,15 m weight straightener:2,1 t dimensions... more
|
|
8
Kaiserslautern, Germany
dealership location
6526 km
2010
ready for operation (used)
General Data Measurements width 3100 mm Measurements depth 1870 mm Measurements height 2200 mm Machine weight 3200 kg Control Unit Brand Quick-Tech Main Drive Number of axis 6 Movement X-Axis Movement 250 mm Z-Axis Movement 330 mm Media Nnh8l Main electronic connection 400V / 50 Hz Chip conveyor Yes This Quick-Tech XP4-60SM Lathe was manufactured in 2010 in Taiwan. Equipped with a control unit of the same brand, this 6 axis machine presents perfectly good conditions. It incorporates 9 driv... more
|
|
|
