Used Condensation Drying Wood for sale (9,842)

Condition: new, XPLAN is the result of nearly 50 years of Incoplan’s experience in providing a highly efficient and energy-saving method for drying wood, worldwide, in all climate conditions. Compared to conventional air exchange systems, condensation drying with XPLAN requires approximately 60% less electrical energy. This is a gentle drying method, particularly suitable for hardwoods and softwoods, allowing their characteristics to be preserved. XPLAN is available in 3 versions: LITE, up to 10 m³ STANDARD, with additional fans for tunnel structures PRO, up to 20 m³ of wood. Build or purchase your own structure, install and connect XPLAN, and start your drying process. We provide a complete design for the ideal chamber to be built, material suggestions, and all the information you need. The images show the three versions, with suggestions for the homemade chamber structure and walls. The electrical cabinet is always included and connected to the machine. The software is automatic, touchscreen-operated, and contains several preloaded drying programs. TECHNICAL DATA SPECIFICATION COMPRESSOR NOMINAL HP 1.5 kW SHIPPING WEIGHT 154 kg AUXILIARY HEAT 4 kW INTERNAL BLOWER MOTORS 0.25 kW motor; airflow 3,060 m³/h HEAT TREATING CAPABILITIES Yes, up to 71° C (only with Heat booster) Bedpfew Ug Atex Adhjlp CIRCULATING FANS 2 included: 400 mm fans, 0.25 kW, 3,060 m³/h each POWER REQUIREMENTS 5.8 kW (28A) - 400 V 50 Hz (1-phase) DIMENSIONS (H X L X W) 94 × 83 × 52 cm (base unit only) 1 power vent system included (includes exhaust and intake) DRYING TIME 25mm Green Pine - 80% to 8% in approximately 12 days. 25mm Green Oak - 65% to 8% in approximately 35 days. LOAD CAPACITY For softwoods and fast-drying hardwoods (Pine or Poplar) 3-5 m³ For slow-drying hardwoods (Oak) 10 m³ NOMINAL WATER REMOVAL RATE 114 kg per 24 hours - 5 l/h

Condition: good (used), Year of construction: 2013, functionality: fully functional, working width: 330 mm, passage height: 120 mm, total length: 5,000 mm, Equipment: documentation/manual, Infrared drying tunnel for profiled wood Manufacturer: Makor Type: FTC-IRE Year of manufacture: 2013 The Makor FTC I.R.E. paint drying system is designed for the accelerated curing of paints and surface coatings using electric heating elements, which are applied to frame timber, moldings, profiled wood, and generally all types of wood profiles. It can also be used for preheating the profiles before the painting process to improve the paint quality. Passage width approx. 330 mm Bedjzhap Eopfx Adhslp Passage height approx. 120 mm Infrared heating elements from above and below Includes outlet conveyor belt, manufacturer: Makor Length 4000 mm, conveyor belt width 250 mm Connected load approx. 55 kW Dimensions: Drying tunnel approx. 5000 x 1400 x 1750 mm (L x W x H) Operator terminal approx. 1200 x 500 x 1100 mm (L x W x H) Conveyor belt approx. 4000 x 600 mm (L x W) Total weight approx. 2200 kg Includes documentation, wiring diagram, and operating manual.

Condition: new, Capacity: 3 to 20 m³ — the ideal “pocket” system for small and medium-sized producers Product Description: Bedpew Hf Adjfx Adhslp The Mobileplan is a high-quality, fully mobile drying kiln designed for maximum versatility. Engineered for rapid deployment and user-friendly operation, it can handle all wood species and greatly simplifies both timber drying and ISPM-15 pallet heat treatment without requiring a fixed installation. Plug-and-play setup: No permanent anchoring required. Easily movable by forklift or crane. Ultra-fast installation: Delivered pre-assembled and factory-tested; ready for operation in less than one day. Fully automatic operation: Automated control of drying cycles for true set-and-forget convenience. Heating options: - Electric - Hot water / steam - Gas Key advantages: - Compact, transportable design for genuine mobility - Installation within 24 hours – reduces set-up time and labor costs - Pre-assembled unit minimizes transport and assembly expenses - Suitable for drying both softwood and hardwood, as well as ISPM-15 compliant pallet treatment - Low running costs thanks to the modular plug-and-play system - Industrial-grade reliability in a compact form factor Mobileplan is the ideal solution for professionals seeking a premium drying system that offers mobility, rapid commissioning, and low operating overheads—perfect for workshops, small sawmills, or on-site operations.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), type of cooling: air, Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Bsdpevllxdefx Adhelp Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Condition: new, 26-HT-Wooddry365-SET Bljdpfx Adowzzg Ishep Wood Drying Kit WoodDry 365 SET Our wood drying kit provides everything needed for rapid and effective wood drying. The set includes a high-performance WoodDry 365 automatic controller, a professional wood dehumidifier, two fans, two sensors, and a heater. The user-friendly operation ensures effortless handling and delivers outstanding drying results with minimal effort. CE compliant 100% Made in Austria (designed, manufactured, and quality-tested) Advantages and Features: - Complete Set: All essential components required for efficient, comprehensive wood drying are included. - Compact and Space-Saving Solution: All components are perfectly matched and require little space, making the system suitable even for smaller workshops or rooms. - Easy Operation: The intuitive WoodDry 365 controller is easy to use, suitable for both beginners and experienced users. - Optimal Drying: Thanks to the heating unit and two fans, air circulation is optimized for faster and more uniform wood drying. - Energy Efficient: The kit operates with high efficiency, ensuring low operating costs combined with excellent results. - Versatile Application: Ideal for drying wood for furniture production, woodworking, or other projects. Also suitable for use in small to medium-sized workshops. - Automatic WoodDry 365 Controller: The proprietary control unit fully manages the entire drying process. The operator only needs to specify the wood thickness, type, and desired final moisture content. The system automatically adjusts the drying process for optimum results and energy savings. - Robust and Durable: High-quality components guarantee a long service life and reliable performance over an extended period. - Combo Sensor: Specially developed for precise measurement of air humidity, wood moisture, and room temperature. - Suitable for most softwoods and hardwoods such as spruce, beech, ash, as well as exotic woods and firewood. Oak is not recommended due to its high tannin content—similar to other dehumidifier systems, its use is limited. - The standard set with one HT100 dehumidifier can process up to 9m² of wood. Technical Data: Controller Connection: 16A. Dehumidifier Rated Power Consumption: 1050W Airflow: 1100 m³/h Maximum Dehumidification Capacity: 100 liters / 24h Dimensions: 516 x 516 x 656 mm Weight: 48 kg Heater Heating Output: 9.0 kW Dimensions: 455 x 275 x 300 mm Air Output: 1,150 m³/h Fans High Airflow: 102 m³/min Air Velocity: 3.66 m/s Low Noise Operation: 64.1 dB(A) Power Supply: Mains operation, hard-wired power cable (230 V, 50 Hz) Dimensions: 52 x 53 x 18 cm (W x H x D) Power Cable Length: approx. 162 cm Compact Sensor Cable: 5 meter cable Measured Values: air humidity, wood moisture, temperature Optional Equipment: - 1x additional compact sensor with 10 meter cable - 1x additional HT100 dehumidifier – for drying up to 18m² of wood - 1x air damper with cable – for optimized drying

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, Display model. Like-new condition. We are selling a drying chamber powered by a high-efficiency gas burner, featuring an indirect system (no open flames) for heat exchange. Suitable for all types of wood, including softwood and hardwood, as well as pallets or firewood. Used only occasionally for demonstrations and drying cycle tests, and is 100% functional. TECHNICAL DATA Size: 50 m3 Power supply: Fraccaro 200 kW gas burner Intended use: Pallets Firewood Hardwood Softwood Condition: Like-new Special features: Indirect flame burner for maximum safety Structure materials: Aluminum Steel Rock/GLASS wool Control system: Fully customizable Bljdpfx Ajyyb Nyedhep Remote control Number of fans: 4 Temperature range: 20-75°C

Condition: ready for operation (used), Sawn timber capacity: 1.5m³, max. sawn timber length: 4500mm, with control system, aluminum stacking strips and cables as accessories. The system has not been in operation for approximately ten years, the electronics would need to be checked. An on-site inspection is possible. Bodpfx Adsy Uydlsholp

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, overall weight: 1,000 kg, total length: 5,500 mm, total width: 1,000 mm, total height: 1,900 mm, loading space length: 3,800 mm, loading space width: 800 mm, loading space height: 600 mm, KIT 150: Designed for carpenters, joiners, musical instrument manufacturers, and woodturning workshops with a storage capacity of 1.5 to 2.5 cubic meters of wood and a stacking width of 0.80 m to 1.00 m. This energy-saving system operates on the principle of conventional drying, using an intake damper and an exhaust damper. A vacuum pump is used for rapid dehumidification. Bedpfetqlp Rox Adholp

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. Bledpjq Nfuzjfx Adhjp 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, The refrigerant gas exits the compressor and flows to the air inlet connection of the ATC-E condenser. Heat from the refrigerant is transferred through the heat exchanger tubes to the water that flows downward through the tubes. Simultaneously, air is drawn into the air inlet grilles at the base of the condenser and flows upward over the heat exchanger, counter to the water flow. A small portion of the water evaporates, and heat is removed from the system. The warm, moist air is drawn by the fan to the top of the evaporative condenser and released into the atmosphere. The remaining water falls into the collection basin at the bottom of the condenser, where it is recirculated through the water distribution system and flows down over the heat exchanger. Thermal-Pak II Heat Exchanger EVAPCO's Thermal-Pak II heat exchangers, featuring a patented design, ensure maximum cooling capacity. The airflow through the heat exchanger is countercurrent to the fluid flow, resulting in the most efficient heat transfer process. A specially designed heat exchanger is used to reduce air pressure drop across the unit while maximizing the tube surface area and increasing the heat transfer capacity. Elliptical return bends provide more circuits per heat exchanger bundle and increase the maximum capacity per footprint. The heat exchanger is located in the airflow, resulting in an increase in the dry-bulb temperature. CrossCool internal tube enhancement increases fluid turbulence and provides additional evaporative capacity. Available in type 304 SS or type 316 SS construction. Drift eliminators Limit drift rate to no more than 0.001% of the recirculated water flow rate. Minimize the risk of Legionella spread. Constructed with an inert polyvinyl chloride (PVC). Superior air inlet louvers and screen design. Constructed with an inert polyvinyl chloride (PVC). Two-tier design that minimizes drift loss and the potential for algae growth in the tower. Framed in steel in easily removable sections. Pressurized water distribution system Blsdpfxs Ag Id Tj Adhjp EVAPCO's zero-maintenance ZMII® spray nozzle remains clog-free, allowing for even and consistent water distribution. This makes it the best-performing, corrosion-resistant, and maintenance-free water distribution system in the industry. ZMII spray nozzles have a 1-1/4" diameter opening and a 1-1/4" transparent splash plate. Mounted in corrosion-resistant PVC water distribution piping with threaded end caps. Provides unparalleled heat exchanger coverage and scale prevention. Stainless Steel Water Basin Available in type 304 or type 316 stainless steel. Covers the entire area of the water basin, including the supporting columns and the frame of the louvers. Welded water basin seams for leak-free operation. Stainless Steel Housing and Fan Available in type 304 or type 316 stainless steel. Covers the entire upper section, including the fan shroud. Stainless Steel Thermal-Pak II Heat Exchanger Available in type 304 or type 316 stainless steel. The stainless steel heat exchanger offers superior resistance to corrosion in harsh environments and is available within EVAPCO's standard delivery time! The EVAPCO 304 STT heat exchanger option can be manufactured as an ASME heat exchanger.

Condition: new, Volumes: available in 10 m³ or 20 m³ versions Product description: The Easyplan is a compact yet powerful drying system designed for drying softwood and hardwood, as well as for treating pallets and wood packaging to comply with ISPM-15 standards. It ensures complete phytosanitary compliance and consistently delivers high-quality drying results for a wide range of timber types. Installation takes less than one day, making it ideal for rapid deployment in small to medium-sized production facilities. The process is fully automatic – simply load the kiln and let the system manage the entire drying or heat treatment cycle. Bledpfxsw Hfzas Adhsp Available heating options: Electric: 27 and 36 kW Gas: 200 kW gas burner Hot water/steam Wood stack size for EASYPLAN 10 and EASYPLAN 20: 4 m - 6 m 180 - 300 EPAL pallets Key benefits: Capacities of 10 m³ or 20 m³ to suit different production requirements Suitable for both softwoods and hardwoods ISPM-15 compliant pallet and wood packaging treatment, firewood drying Fully automatic drying process Quick installation in less than 24 hours Flexible heating options to match available energy sources

Condition: as good as new (ex-display), Exhibition machine The Holzprofi dehumidifier HT-100 is ideal for drying wood. The dehumidifier can also be used for drying cellars, construction sites, etc. Bljdsvrvmxepfx Adhop Advantages and features: - High drying performance even at low temperatures, thanks to hot gas defrosting - Good dehumidification even at low humidity - High efficiency for energy-saving operation - High-quality machine from the industrial sector, durable and suitable for many purposes. - The practical control switches the dehumidifier off automatically when the desired humidity is reached. - Direct hose connection to drain large amounts of water without any problems Suitable for most soft and hard wood types such as spruce, beech, ash, as well as exotic woods and firewood. Due to the high tannic acid content, oak is conditionally or not recommended - as with other dehumidifiers. Technical data: Nominal power consumption: 1050 W Max. power consumption (35°C, 95% R.H.): 1480 W Air flow rate: 1100 mc/h Coolant: R410a (environmentally friendly) Operating range (temperature): 1-35 °C Operating range (relative humidity) T

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 30111, functionality: fully functional, operating hours: 123 h, The OekoRona M is an electrostatic precipitator that significantly reduces fine dust emissions from automatic wood-fired heating systems with outputs between 300 kW and 3 MW. The precipitator has a modular design and can be installed in both new and existing systems. The mechanical cleaning system enables fully automatic operation of the precipitator and reduces maintenance to a minimum. OekoRona M facts: - for automatically fed wood-fired heating systems up to 3 MW - automatic, mechanical cleaning - tested separation efficiency - low operating costs - retrofittable - suitable for overpressure and underpressure operation - bypass - low energy consumption - various designs - flexible ash removal - operating optimization through remote maintenance Manufacturer: OekoSolve AG Type: OekoRona M Identification number: ORM-30111 Specified electrical power consumption: 1.65 kW Temperature class: T250 (according to the specified marking) Operating principle The flue gas flows through the tubes of the filter system, which are equipped with ionization electrodes. The high voltage electrically charges the fine dust particles, which then deposit on the inner surfaces of the separation tubes. The mechanical cleaning system automatically removes the deposited dust particles, which then fall into a lower collection container. An automatic discharge screw can transport the dust to an external collection container. Key technical features Feature Description Application area Automatic biomass-fired heating systems Boiler output range Approx. 300 kW to 3 MW for the product series Dust separation Electrostatic Cleaning Automatic mechanical cleaning Flue gas temperature Bljde Aba Rgjpfx Adhop Maximum 250 °C Operating mode Suitable for overpressure and underpressure systems Bypass Integrated bypass Operation Touchscreen control Dust removal Collection container; screw discharge, depending on the design or optional Condensation protection Electrical or hydraulic heating, depending on the design Installation After the boiler in the boiler room

Year of construction: 2021, condition: excellent (used), Wood dryer by Italian company BIGonDRY 3 chambers - each: - width 9.6 m - length 7.5 m - gate height 4 m Input of one about 100 m3 - total 300 m3 Bjdjvkxmfopfx Adhslp Dryers used only for tests - practically new. Complete with full documentation, automation, laptop and internet connection (remote control).

Condition: new, No. 3187 Vacuum dryer / drying chamber ISVE ES 5 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1600 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 1100 mm Timber pile height: 990 mm Net wood volume: approx. 5 m3 Installed electrical power: 16,01 kW Average hourly power input: 8 kW/h Includes: - 12 electric heating plates (each 1100 x 5000 x 10 mm LWH / 57 kg / 1,25 kW) - 2 internal condensers (turbofan of 0,55 kW each 380 VCa with stainless steel pipes) - 1 one-way valve (clapet: one ¾” for vacuum circuit) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1620 x 2300 mm LWH Weight approx. 2900 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Blsdpsvc Axpjfx Adhep Terms of delivery: ex location

Condition: new, No. 3183 Vacuum dryer / drying chamber ISVE ES 3 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1300 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 790 mm Net wood volume: approx. 2,5 m3 Installed electrical power: 8,80 kW Average hourly power input: 4,4 kW/h Includes: - 9 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (65 m3/h / 1,8 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 internal condensers (turbofan of 0,37 kW each 380 VCa) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1300 x 2000 mm LWH Weight approx. 2000 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Blsdpfx Adsu Tipkshop Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, No. 3171 Vacuum drying kiln ISVE ES 2 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1000 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 400 mm Net wood volume: approx. 2 m3 Installed electrical power: 5,27 kW Average hourly power input: 2,7 kW/h Includes: - 6 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (40 m3/h / 1,1 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 6100 x 1150 x 1300 mm LWH Weight approx. 1300 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Bjdpfxouvi Sae Adhjlp Terms of delivery: ex location

Condition: used, This listing is for the Eppendorf thermostat C Dry Block Heater The unit is in full working condition and is ready for immediate release Description Peltier technology enables comfortable and precise temperature control from -10°C to +110°C Heating and active cooling in all common vessel and plate formats from 5μL to 50mL Precise maintenance of various temperature levels Reliable prevention of condensate formation with optional ThermoTop™ (tect™) lid Highly flexible due to large selection of exchangeable SmartBlocks Dry incubation for improved lab hygiene Simple and intuitive operation due to predefined temperature keys (4, 16, 37, 56 and 95°C) Individually store up to 15 programs Comprehensive range of program functions Eppendorf Thermostat C is the ideal device to accurately set and maintain temperatures. The ThermoStat C features excellent temperature management. Peltier technology provides the comfortable and precise temperature control of all conventional lab vessels. The operation is easier and more intuitive than ever before. Predefined temperature keys provide quick access to five important experimental temperatures. Due to comprehensive program functions, you can also individually store 15 programs. With an extensive range of exchangeable SmartBlocks, the ThermoStat C adapts to any application. Key Features Heating and active cooling in all common vessel and plate formats from 5 μL to 50 mL Excellent temperature management Precise temperature control from -10°C to 110°C (110°C can be set when using the 12 mm and cryo SmartBlocks.) Precise maintenance of various temperature levels Reliable prevention of condensate formation with the optional ThermoTop® (tect) lid Maximum flexibility thanks to large selection of exchangeable SmartBlocks™ Dry incubation for improved lab hygiene Simple and intuitive operation due to predefined temperature keys (4°C, 16°C, 37°C, 56°C and 95°C) Comprehensive range of program functions 2 second block exchange due to quick release system of SmartBlock Bjdpfx Adexwc Nmehslp

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw Bjdpfswclkysx Adhjlp - Conveyor belt for waste wood disposal - Stacking machine - Strip magazine not for sale - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately.

Year of construction: 2014, condition: like new (used), fully automatic supply and exhaust 3 chambers Blodpfxevzuuts Adhep chamber dimensions 6.5 x 4 x 4.1m furnace power 350kW

Condition: ready for operation (used), Year of construction: 2017, operating hours: 8,060 h, functionality: fully functional, overall weight: 1,750 kg, total width: 2,300 mm, total height: 2,400 mm, total length: 7,500 mm, input voltage: 400 V, year of last overhaul: 2026, transport width: 2,350 mm, Equipment: documentation/manual, Year of manufacture: 2017 – Engine: 15 kW Cutting dimensions: – Maximum log diameter: 95 cm – Clear distance between rollers: 73 cm – Maximum cutting width (plank): 64 cm – Maximum cutting height above the blade: 39 cm – Maximum cutting length: 6.2 m The sawmill is equipped with a complete hydraulic system: – Hydraulic leveling system – Side stops – Material press – Toothed rotator – 2 loading arms Cutting head equipment: – Automatic device for setting the cutting thickness – Electric adjustment of the head height: up/down – Electric forward/backward feed of the head, with continuously adjustable speed – Electric blade guide arm – Hydraulic blade tensioning system with air cushion Blsdpo Aavnfjfx Adhjp – Bark remover

Condition: used, Year of construction: 2020, Wood-Mizer MP360 – Four-sided planer/moulder • Condition: Lightly used • Four-sided planing: maximum width 350 mm; working height 10–50 mm as standard, up to 160 mm optional • Two-sided planing: width 410 mm; working height 10–230 mm • Single-sided planing: maximum width 510 mm; maximum height 230 mm • Cutter motors: top 5.5 kW; bottom 4 kW; side motors 2 × 3 kW • Feed speed: 3–15 m/min; feed motor 0.75 kW Bsdpfs Af Ha Nox Adholp • Total power: 16.25 kW • Cutter speed: 6,000 rpm at 50 Hz • Dimensions (L × W × H): 2,970 × 1,125 × 1,430 mm • Weight: 675 kg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: HS-14E, overall weight: 185 kg, total width: 135 mm, total length: 144 mm, total height: 228 mm, fuel: electricity, SCHORR Log Splitter 14t HS-14E PRO Where conventional electric splitters with 12 tons reach their limit, the HS-14E goes further: 14 tons of splitting force drive the splitting wedge through hardwood, dry and knotted logs, evenly and without jamming. The powerful hydraulic cylinder with a 9.5 cm diameter reliably delivers the pressure, stroke by stroke. Splitting is done vertically with a splitting length of up to 104 cm: meter-long logs fit with room to spare, as do shorter sections from 56 cm. This allows you to quickly work your way through the pile of logs, piece by piece. The most strenuous part of the splitting process is not the splitting itself, but lifting the logs. The HS-14E is equipped with an integrated log lifter specifically for this purpose: hook the log, lever it, and the section aligns itself effortlessly into the splitting position, without straining your back and shoulders. When not in use, the log lifter serves as a stable protective bar on the machine. Operation is performed via the two-hand safety control, and the massive, robust design with a weight of 185 kg ensures a secure stand, even at full splitting force. The HS-14E does not require a tractor or a power take-off: the 400 V electric motor with 3.5 kW is connected to the standard 16 A socket and delivers its power quietly and without emissions. This allows you to split wood in the barn, in the hall, or on the farm, where gasoline engines would be disruptive and a tractor is not available. The technology is deliberately kept simple, robust, and repairable: hydraulics, steel frame, electric motor – no unnecessary frills. The HS-14E is delivered pre-assembled and with hydraulic oil already filled: simply connect it and start splitting. Wear and replacement parts are in stock, and we handle repairs in our own workshop. You buy directly from the manufacturer and receive personal advice. And for those who want to combine a power take-off and electric power, the HS-22PE with 22 tons is the larger model. Technical data -- Manufacturer: SCHORR -- Type: HS-14PE -- Splitting force: 14 t -- Weight: 185 kg -- Drive: 400 V electric motor (3.5 kW, 16 A) Bledpfxezwmypo Adhjp Dimensions: -- Length: 1440 mm -- Width: 1350 mm -- Height: 2280 mm -- Splitting wedge: 17.5 cm -- Splitting diameter: max. 30 cm / min. 10 cm Your advantages at a glance -- Ready for immediate use – no long waiting time -- Massive design – 185 kg weight for maximum stability -- Comfortable log lifter for heavy wood -- Spare parts always available -- Competent service & advice Whether delivery or collection in 48465 Schüttorf – we offer the right solution.

Condition: excellent (used), Year of construction: 2024, Wood-Mizer CNC5003 CNC Machining Center – practically unused Key data • Category: CNC machining centers / CNC routers for wood (nesting) • Year of manufacture: [2024] • Condition: practically unused, demo / showroom unit • Location: [KOŁO], Poland • Availability: 2 units in identical specification — discount available if both are taken • Sold directly by the manufacturer, no intermediaries Description Bsdpfx Aeyr Dawjdhelp An industrial-grade CNC machining center at a mid-range machine price. Why this machine is worth considering • Only premium, branded components — no generic parts: FANUC, HSD, HIWIN, ATLANTA, FESTO, BECKER. Each of these components is serviceable and supported worldwide, independently of us as the machine builder. • FANUC control — the world's most widely used CNC platform, standard ISO G/M code, ready to interface with any CAM system. Support, training, and service are available from any authorized FANUC partner or CNC integrator. • Gantry design with dual drive — high stability and accuracy, high-resolution digital servos, low vibration. • 3095 × 1535 mm working area accommodates a full 3050 × 1530 mm panel — an entire sheet is machined in one setup, with no pre-cutting and no repositioning. • 6-zone vacuum nesting table with 216 vacuum points — exceptional flexibility in work-holding: panels, irregular parts, and porous materials. • The machine is on-site and available for inspection and a test cut before purchase, along with the available technical documentation. Technical data Specification Value Actual working area X / Y 3095 × 1535 mm (max. raster table area) Z-axis travel 200 mm Rapid traverse X / Y / Z 60 / 30 / 15 m/min Spindle HSD 11 kW, HSK63F, 24,000 rpm, inverter-driven, ceramic bearings Tool changer ATC — 12-position carousel on the gantry, service access hatch Drives and guideways ball screw, linear guides, and carriages by HIWIN; rack and pinion by ATLANTA Control FANUC, ISO G/M code, PC and CAM interface, built-in server Table grey extruded polypropylene raster table; 6 zones × 36 points = 216 individual vacuum points, each zone with its own valve Vacuum pump BECKER, 126 m³/h, 4 / 5.5 kW, max. vacuum 0.9 bar Pneumatics FESTO Chip extraction articulated extraction hood Control panel movable, on wheels — access from 3 sides of the table; local operation or via network Frame size (footprint) 1570 × 4150 mm Total length / width / height 4460 / 3000 / 2400 mm Materials: wood, sheet materials, plastics, foam, composites, light alloys (aluminum). Terms of sale — stated openly • Sold as-is, without a manufacturer's warranty and without service support from our side — our CNC project has been discontinued. This is the only reason for this price. • Service and wear parts are available directly from the component manufacturers (FANUC, HSD, HIWIN, BECKER, FESTO) and from independent CNC integrators. • Inspection and a test run on-site are welcome — bring your own material and file. • Net price, EXW [KOŁO]. Loading is our responsibility; transport and unloading are the buyer's responsibility. Intra-community supply (0% VAT) for EU buyers with a valid VAT ID. • We can connect you with companies offering commissioning and operator training (third-party service, priced separately).

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 4,500 kg, fuel type: electric, Shredding machine MRZ 1530, Main motor: 55 kW; 400 V - 50 Hz - 3 phase incl. turbo coupling Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3 phase Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Hopper opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 m³ hydraulically operated slide Screen opening: 12 - 15 mm Suction nozzle Ø 200 mm Weight approx. 4,500 KG Dimensions (l x w x h) approx. 2765 x 2520 x 1730 mm Turbo coupling Standard features include: - Profile rotor for maximum throughput Bjdpfe Aa Nq Tex Adhslp - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput performance - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Special guides for hydraulic slide - Vibration-damping machine feet - CE compliant The shredder is designed for shredding untreated wood, chipboard, and MDF with a maximum hardwood content of 10% per hopper filling. If the hardwood content is higher, we recommend our MGZ series wood shredders. Other materials after testing and approval by the manufacturer. When shredding veneer or paper, a special scraper (at extra cost) is required to prevent the thin materials from getting under the hydraulic slide and causing it to jam. Requirements for the raw material: - The moisture content (oven-dry) must be below 14% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear - For an optimal shredding process, the material to be shredded must be pre-broken to a maximum of 140x80x30 cm before being fed into the wood shredder. The shredder is placed higher to prepare for the conveyor belt. The conveyor belt is not included!!!!!