Used Wood Drying for sale (8,488)

Condition: new, XPLAN is the result of nearly 50 years of Incoplan's experience in delivering highly efficient and energy-saving wood drying solutions worldwide, in all climate conditions. Compared to conventional air exchange systems, condensation drying with XPLAN requires about one-third of the electrical energy. This is a gentle drying method, particularly suitable for both hardwoods and softwoods, preserving their qualities, but it can also be used for firewood drying. With the XPLAN PRO KIT, it is also suitable for drying resinous woods down to 8% moisture content. Djdew Ug Atspfx Aaxoki Suitable for both demanding hobbyists and professional woodworkers, these systems guarantee the best price/performance ratio for wood drying. Build or purchase your own structure, install and plug in XPLAN and start your drying process. For example, cargo containers can be adapted for this purpose.

Year of construction: 2021, condition: used, For sale: NARDI INTERNATIONAL K 200 wood drying chamber / kiln (2021) The unit is in excellent technical condition, complete and ready for operation. Equipped with a LEONARDO 3.0 control system and heat recovery system. — 1. Basic specifications Load capacity: approx. 115 m³ Usable (internal) dimensions: • Width (loading side): 10.8 m • Depth: 8.9 m • Height: 4.1 m Dksdeyf Uynspfx Aaxji Loading door: 10.9 × 4.2 m, sliding type Max. drying temperature: 75°C Heating: hot water 80°C, max 2 bar Heating capacity: 345,000 Kcal/h (401 kW) Power supply: • 400V / 50 Hz • 230V / 50 Hz (controls) — 2. Construction Chamber made entirely of oak acid-resistant aluminium. Aluminium panels insulated with glass wool (140 mm). INOX (stainless steel) screws, eliminating thermal bridges. External sheathing of trapezoidal sheet with ventilation ducts. Construction resistance: • Snow load up to 120 kg/m² • Wind resistance up to 100 km/h — 3. Air circulation • 6 tunnel fans (100% reversible) • 4 kW motors, IP55 • High-temperature bearings • Individual frequency inverters Ensures uniform and energy-efficient drying. — 4. Heat recovery • Centrifugal fan • Double heat exchangers • 6 Belimo dampers • PLC control • Acid-resistant INOX ducting The system significantly reduces energy consumption. — 5. Control system CE-compliant control cabinet, IP55. PC with LEONARDO 3.0 software (Windows 7). Features: • multi-stage cycle programming, • parameter archiving, • graphical process visualization, • control of up to 32 chambers. — 6. Sensors • 6 wood moisture probes • 2 temperature probes • 2 EMC probes • RCU module — 7. Commercial information • Price: 72,000 EUR / unit • Availability: 5 units (5-chamber module) • Sale only as a set of 5 units • Terms: EXW (38-120 Czudec, Poland) – Incoterms 2020 For enquiries please contact us via email or WhatsApp.

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, Drying chamber Make: Mühlböck Type: ZLSM Dkodpewr Tzfjfx Aaxoi Year of construction: 2003 Internal dimensions approx. 7400 x 4500 x 4250 mm (LxWxH) 3 fans each 3 kW 10 measuring points With frequency converter With control system Heating power 223 kW Water temperature 85 °C Water quantity 14 m³/h Voltage 230/400 Volt Connected load 12 kW Fans 3 x 3 kW Control program MB Intellevent 5000

Condition: new, functionality: fully functional, Capacity: from approx. 200 up to over 2,000 EPAL pallets (1.2 × 0.8 × 0.15 m) Product description: The Superplan is a professional system for drying and heat‑treating pallets in full compliance with the ISPM‑15 standard, ensuring proper sanitization for export. Designed to handle any type of wood, it reliably achieves a core temperature of 56 °C for at least 30 minutes, guaranteeing the elimination of pests and pathogens in accordance with international regulations. Available heating options: Djdpfxsw Hfv De Aaxoki - Gas - Electric - Hot water / steam Its modular design allows for front loading or tunnel configurations, optimizing hot‑air circulation and improving thermal efficiency through controlled internal ventilation and dedicated core‑temperature sensors. Key benefits: - Variable capacity: from 200 up to over 2,000 EPAL pallets per cycle. - Guaranteed compliance with ISPM‑15 export requirements. - Flexible heating options: gas, electric, or steam/hot water. - Energy‑efficient with precise ventilation control and core‑temperature monitoring. - Robust and adaptable: ideal for high‑productivity industrial operations. Superplan is built for pallet manufacturers and wood processors exporting worldwide — combining efficiency, regulatory compliance, and flexible energy options in a single, high‑performance solution.

Condition: new, Capacity: 3 to 20 m³ — the ideal “pocket” system for small and medium-sized producers Product Description: The Mobileplan is a high-quality, fully mobile drying kiln designed for maximum versatility. Engineered for rapid deployment and user-friendly operation, it can handle all wood species and greatly simplifies both timber drying and ISPM-15 pallet heat treatment without requiring a fixed installation. Plug-and-play setup: No permanent anchoring required. Easily movable by forklift or crane. Ultra-fast installation: Delivered pre-assembled and factory-tested; ready for operation in less than one day. Fully automatic operation: Automated control of drying cycles for true set-and-forget convenience. Dkodpfxsw Hf Ads Aaxoi Heating options: - Electric - Hot water / steam - Gas Key advantages: - Compact, transportable design for genuine mobility - Installation within 24 hours – reduces set-up time and labor costs - Pre-assembled unit minimizes transport and assembly expenses - Suitable for drying both softwood and hardwood, as well as ISPM-15 compliant pallet treatment - Low running costs thanks to the modular plug-and-play system - Industrial-grade reliability in a compact form factor Mobileplan is the ideal solution for professionals seeking a premium drying system that offers mobility, rapid commissioning, and low operating overheads—perfect for workshops, small sawmills, or on-site operations.

Condition: new, Volumes: available in 10 m³ or 20 m³ versions Dsdpfxsw Hfzao Aaxoki Product description: The Easyplan is a compact yet powerful drying system designed for both softwood and hardwood drying, as well as for ISPM-15 compliant pallet and wood packaging heat treatment. It guarantees full phytosanitary compliance and consistently provides high-quality drying results across a wide variety of timber species. Installation is completed in less than one day, making it ideal for rapid deployment in small to medium-sized production facilities. The process is fully automated: simply load the kiln and let the system manage the entire drying or heat treatment cycle. Available heating options: - Electric - Gas - Hot water / steam Key benefits: - Capacities of 10 m³ or 20 m³ to match different production requirements - Suitable for both softwood and hardwood - ISPM-15 compliant pallet and wood packaging heat treatment - Fully automatic drying process - Fast installation in under 24 hours - Flexible heating solutions to suit available energy sources Easyplan is the ideal solution for companies seeking a compact, fast-to-install timber drying and ISPM-15 pallet treatment system that does not compromise on performance or quality.

Condition: used, SAGA HFVD45-SA 4.5 m³ wood vacuum drying chamber 3 phase, 380V, 50Hz-40KVA OUTPUT POWER: 30 kW TANK DIMENSIONS: 5700 * 2150 * 2000 mm STACKING SIZE: 4500*1000*1000 mm Dodpfx Aaow Ac Hfoxeki Stacking capacity: 4.5 m³ INTERNAL DIAMETER: Φ1.7m Manual feeding, automatic feeding with motor HYDRAULIC PRESSURE: 3 tons (2 units) VACUUM PRESSURE: -0.093 MPa. Motor Power: 7.5 kW

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: Dkedpeq Nfuzefx Aaxei - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Year of construction: 2022, condition: new, functionality: fully functional, Lauber wood dryer longitudinal ventilation Chamber with stacking trolley Net volume 7.2 m3 Dsdpfx Ajmidtreaxski with wood temperature measuring point -> new / unused / original packaging -> available immediately (standard delivery time approx. 3/4 year) -> see detailed description in the photos -> collection, loading, etc. by buyer -> transportation, customs clearance and insurance by buyer

Year of construction: 2026, condition: reconditioned (used), functionality: limited functionality, machine/vehicle number: 559, Dryer optimized for thick timber or hardwood Usable length: 5000 mm Usable height: 1100 mm Dkedpfxsya Ik Ae Aaxji Usable width: 1100 mm New electrical cabinet and sensors Controlled drying function Missing external rail and trolley (can be supplied or we will assist the buyer with fabrication) Dryer can be inspected in department 74

Year of construction: 2014, condition: like new (used), fully automatic supply and exhaust Dodpfxevzuute Aaxjki 3 chambers chamber dimensions 6.5 x 4 x 4.1m furnace power 350kW

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: Nr.50086, New machine for sale due to circumstances: 6 connection points with ventilation duct. Collection only! Price ex location 31637 Rodewald. Dsdpfxow Uf S He Aaxjki

Condition: used, 2 fans: 2/ 0.75KW Dksdpfx Aom H Utfeaxei Compressor: 5KW Water heater: 9KW Refrigerant: R134A-3.8kg Tension: 380V Congestion: 110cm/80cm/H185cm Weight: +-500kg Voltage: 380V 6900 € Reference: Wood dryer with dehumidification system

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 4,850 kg, total height: 2,900 mm, total length: 10,000 mm, total width: 2,300 mm, Used wood thermal modification chamber. Made of high-quality materials, it ensures effective thermal modification. An ideal solution for wood processing professionals. The chamber was purchased new in 2021 from SUKHOVIY LLC, model KTMD 9. Very rarely used, it was decommissioned in 2023. The chamber modified spruce and pine wood, but also suitable for other species. Operation and thermal processing process are very simple; all you need is electricity and a water. The chamber has a retractable loading cart and a foldable frame that allows the cart to be rolled out. Basic parameters: Dkjdpfx Aajx E Slvexsi - Total volume: 28.5 m³ - Load capacity: up to 10 m³ at a time - Power: 48 kW - Maximum power consumption: 260 kW/m³ - Minimum power consumption: 150 kW/m³ - Maximum internal temperature: 235°C - Dimensions (L x W x H): 10.0 x 2.3 x 2.9 m - Weight: 4,850 kg The chamber comes with an instruction manual in Polish and an EC Declaration of Incorporation.

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. Dkodpswp Rqfjfx Aaxji SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Year of construction: 2019, condition: ready for operation (used), overall weight: 12,000 kg, total height: 4,500 mm, This LINYI JIANZHONG WOOD MACHINERY JJC-CP was manufactured in 2019. It features a maximum pressure of 500 tons, adjustable for various applications, and can handle filling sizes up to 1300 x 2500 mm. With a capacity of 6 batches per hour and a total weight of 12000 kg, this carcase press is CE marked, ensuring compliance with safety standards. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max pressure: 500 t (adjustable) • Filling height: 900 - 1300 mm • Max filling size: 1300 x 2500 mm • Press position: approx. 500 mm below floor level • Feeding table: 2000 x 1960 mm • Pick-up table: 2350 x 2500 mm Dedpfxoyaqgms Aaxjki • Capacity: 6 batches per hour • Ce marking Extra Information Machine still under power Dimensions Machine Depth 3600 mm

Condition: used, Year of construction: 2024, The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistatic moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Dkjdpjun N Auefx Aaxoi Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Size of the machine: Width: 2,280 mm Installation length: 500mm

Condition: reconditioned (used), Year of construction: 2019, machine/vehicle number: WM1000MEH40S, functionality: fully functional, operating hours: 197 h, power: 30 kW (40.79 HP), type of input current: AC, cutting width (max.): 1,700 mm, actuation type: electric, total length: 10,000 mm, year of last overhaul: 2025, A powerful and extremely robust industrial sawmill with an impressive cutting capacity of up to 170 cm trunk diameter is available for sale. The machine is fully operational and in very good condition with only 197 operating hours. Ideal for professional users, large-scale woodworking and businesses with high demands on precision and performance. Technical data & equipment: - 30 kW electric motor – powerful and efficient - Log diameter up to 170 cm Ø - Electric height adjustment - Electric feed Dkedpfjypkc Hjx Aaxoi - Integrated cutting thickness calculator for precise results - Cutting length 6.5 m, optionally extendable - Includes 10 m rail system - Year of manufacture: 2019 - Only 197 operating hours - Fully operational - 2-year warranty This is an opportunity to purchase a powerful machine with very low mileage at well below the original price. Item number: 25-G07 / WM1000MEH40S Note: The photos shown are examples and may differ from the sawmill actually offered. If you are interested or have any questions, please do not hesitate to contact us. We will be happy to send you further information at any time upon request.

Condition: reconditioned (used), Year of construction: 2022, operating hours: 1,025 h, functionality: fully functional, machine/vehicle number: LT70LG57SDH15-3.0AC, cutting length (max.): 8,400 mm, overall weight: 3,000 kg, height adjustment type: electric, tooth pitch: 22 mm, saw band length: 4,670 mm, saw band width: 38 mm, input current: 16 A, Equipment: chassis, LT70 mobile sawmill – built in 2022 – top-of-the-range equipment – 57 hp – 1-year warranty A very well-equipped mobile sawmill (built in 2022) with approx. 1,025 operating hours is for sale. The machine is in good condition and ready for immediate use. Thanks to its extensive range of features, it is ideal for professional users, contract sawmills or larger wood processors. Technical data & features: Dksdpfx Aoypiz Ueaxsi - 57 hp petrol engine - up to 95 cm Ø - AccuSET II cutting thickness calculator - Cutting length 8.4 m (optionally extendable) - Electric feed & height adjustment - Pre-cutter - LubeMizer belt lubrication system - Radio remote control - Hydraulic package 15 log turner, centre clamp, 4 pull-down clamps, 3 compensation rollers, 1 of which is driven, loading arm) - 3.0 t double axle - Year of manufacture: 2022 - Approx. 1,025 operating hours - 1 year warranty Item number: 25-G04 / LT70LG57SDH15-3.0AC

Condition: used, Year of construction: 2005, functionality: fully functional, cutting length (max.): 6,500 mm, input voltage: 400 V, - Year of manufacture: 2005 - Electrical diagram - Electric motor: 15 kW - Log cutting length: up to 6.5 meters - Control: stationary control panel - Additional equipment: - Hydraulic loading - Hydraulic hold-down - Hydraulic log turner - Roller adjustment - Debarker (for removing bark prior to cutting) - Dual-function hold-down - Side stops - Leveling rollers Djdjyrdg Djpfx Aaxoki Machine dimensions: - length: 750 cm - width: 220 cm - height: 240 cm - weight ~1700 kg

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: MB200MEH3SP-E, functionality: fully functional, cutting length (max.): 3,962 mm, cutting height (max.): 203 mm, cutting width (max.): 1,420 mm, Lightly used Woodmizer Slabmizer MB200. This machine is ideal for surfacing large planks and live edge slabs. The Slabmizer MB200 is renowned for its precision and reliability. Includes extraction unit. Specifications: Brand: Woodmizer Model: Slabmizer MB200 Year of manufacture: October 2021 Power supply: 380 volt / 16 amp Motor: 2.9 kW Extraction unit: Power supply: 380 volt / 16 amp Capacity: 2,950 liters per minute Asking price for Slabmizer including extraction: €11,950 excl. VAT Additional information: Maximum material width: 1,420 mm Maximum material height: 203 mm Maximum material length: 3,962 mm (or longer with optional 1.5 m extensions) Minimum material length: 558 mm (22") Maximum cutting depth: 3.2 mm (1/8") Minimum cutting depth: 0.4 mm (1/64") Cutterhead: 127 mm (5") with five four-sided carbide knives Cutterhead speed: 5,500 RPM Powered cutterhead: Directional control and variable feed rate Dkjdpfx Aaoyh Ng Sexji Sanding head: Optional 7" orbital sanding head Dust extraction port: 90 mm (3.5") diameter Country of manufacture: Poland

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Dksdpfxsya Hvqs Aaxoi Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Condition: good (used), QUICK WOOD RO800 structuring brush machine or intermediate sanding machine Working width 700 mm, working height 200 mm Dkjdsyk H Eaepfx Aaxei 2x4 special brushes Brush rotation speed control Rotation speed control for the 2 blocks of 4 brushes each Feed speed adjustment Electric adjustment of the spacing of the 2 conveyor belts Electric raising and lowering of the brushes

Condition: as good as new (ex-display), Year of construction: 2023, cutting width (max.): 550 mm, overall weight: 800 kg, Wood-Mizer MS750L Panel Saw for Professional Cutting of Furniture Boards Machine used for training and demonstrations, serviced and factory-set. Processing parameters: Max. cutting thickness (perpendicular): 97mm Max. cutting thickness at 45°: 69mm Cutting length: 3020mm Technical specifications: Main saw blade Spindle diameter: 30mm Saw blade diameter: 300-400mm Blade tilt adjustment range: 0-45° Saw blade speed: 4500 rpm Scoring unit Dkjdpjyr Dg Dofx Aaxei Scoring spindle diameter: 20mm Scoring blade diameter: 120-125mm Scoring blade speed: 8000 rpm Sliding table (aluminium) Table length: 3020mm Table width: 416mm Table stroke length: 3580mm Working table (cast iron) Table length: 1050mm Table width: 550mm Table height: 885mm Table extension: 895x1000mm Main motor: 6kW Scoring motor: 0.75kW Electric adjustment of blade height and tilt Pneumatic longitudinal clamp with distribution Extraction ports: 1x100mm, 1x60mm Weight: 800kg

Condition: as good as new (ex-display), Year of construction: 2022, Wood-Mizer MS300 High-precision table saw Machine used for training and demonstrations, checked and factory-adjusted. Processing parameters: Max. thickness at perpendicular cut: 100 mm Max. thickness at 45° cut: 65 mm Technical specifications: Circular saw Arbor diameter: 30 mm Saw blade diameter: 315 mm Max. blade width: 4 mm Blade tilt adjustment range: 0–45° Distance between blade and parallel fence: 800 mm Saw blade speed: 4,500 rpm Sliding table (aluminum): Table length: 1,400 mm Table width: 350 mm Sliding stroke: 1,235 mm Sliding table extension: 500 x 360 mm Dodpoyr Dfaefx Aaxski Working table (cast iron): Table length: 900 mm Table width: 750 mm Table height: 850 mm Table extension: 520 x 150 mm Motor: 3 kW Extraction ports: 1x100 mm, 1x60 mm Weight: 260 kg