Used Construction Lift Machine for sale (89,226)

Year of construction: 2008, operating hours: 133 h, condition: used, JBM - Wood Chipper Type 630 MDX on Single-Axle Chassis / Car Trailer > Kubota diesel engine 44 kW (60 HP) > Sprung, braked single-axle chassis > Wide feed: 310 x 220 mm > Max. log diameter: up to 220 mm > Adjustable wood chip length: 0 – 25 mm Hjdpfx Aozyf Htsl Aou > Weight approx. 1,690 kg > Only 133 hours! > Year of manufacture: 2008 On request, we can provide a leasing or financing offer. Mr. Mihm (phone) will be happy to assist you. Further information can be found on our website. Errors and prior sale excepted. = Further Information = Please contact Tobias Ebert for more details.

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Hodjydvzdjpfx Al Aou Spindle Taper: BT 30 Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required

Condition: good (used), Year of construction: 2013, 480mm swing over bed, 257mm Swing over the Cross-slide, 1250mm between centres, 80mm spindle bore, 25-2500rpm spindle, 7.5kW Spindle Motor, coolant, Prototrak SLX Control, 3 jaw chuck, QCTP & holders, tailstock. Hjdpfxezqr Hne Al Aeu

Condition: used, Year of construction: 1996, Haarup planetary mixer with skip hoist and traks. Ideal for face-mix in paving block production or for the face-mix concrete layer. Hsdpfeyyl Adjx Al Aju Dismantled, ready for loading.

Condition: excellent (used), functionality: fully functional, Krupp/Hydraulic Hammer/Demolition Hammer/Chisel • Quick coupler: CW30, used • 2 hydraulic connections • Total weight: 1500 kg • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions. Hjdszi Dnzjpfx Al Aeu

Condition: good (used), Year of construction: 2001, mast type: telescopic, fuel type: electric, color: red, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 2.600 kg Functional Lifting capacity: 200 kg Working height: 2.800 cm Dimensions of cargo space: 731 x 87 x 197 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Remanufactured: Yes Delivery terms: EXW Max. horizontal reach: 2600 m Hodpfx Ajzymlksl Aju Max swing of platform in degrees: 999 Latest inspection: 2026-09-02 Production country: DK Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Hjdpfxszb Ipzo Al Aeu Coolant pump and tank

Year of construction: 2006, operating hours: 7,913 h, condition: used, Terex Pegson AX 877 E/M Trak jaw crusher, year of manufacture: 2006, operating hours: 7,913, engine: CAT [149 kW/200 hp], magnetic separator, 80% chain undercarriage, remote control, weight: 29,390 kg, German machine On request, we are happy to offer you a leasing or financing package. Mr. Mihm (phone) will be pleased to assist you. More information is available on our website. Errors and prior sale excepted! Hedpfx Ajzwluxel Aju = Further Information = Please contact Tobias Ebert for more details.

Condition: used, Westtech Woodcracker G850 Root Rake - New machine In stock - Working width: 850 mm - Own weight: approx. 585 kg - Hydraulic flow rate: 40-60 l/min - Operating pressure: 200-250 bar - Carrier vehicle: approx. 7.5-15 t - 2x hydraulic gripping arms - Optional: Fine rake attachment Numerous adapter plates available on request. We are an official Westtech Woodcracker distributor and service partner, Magni telehandler distributor and service partner, JCB construction machines distributor and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We offer the complete Westtech Woodcracker range for you! Rental possible = Further information = Hjdpfoyfplfjx Al Aeu New: Yes Contact Tobias Ebert for more information.

Condition: used, Westtech Woodcracker G1650 Root Rake - New machine, in stock - Working width: 1650 mm - Own weight: approx. 1610 kg - Hydraulic flow rate: 50-90 l/min - Operating pressure: 200-250 bar - Carrier vehicle weight: approx. 20-25 t - 2x hydraulic gripping arms - Optional: fine rake attachment Numerous adapter plates available on request. We are an official Westtech Woodcracker sales and service partner, Magni telescopic handler sales and service partner, JCB construction equipment dealer and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles in stock, one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range! Rental possible = Further information = New: Yes Contact Tobias Ebert for further information. Hodpfsyfrgljx Al Aou

Year of construction: 2014, operating hours: 20,914 h, condition: used, = More information = Hsdpfx Aloyxkmxe Aou Please contact Tobias Ebert for further details.

Condition: good (used), Fountain industrial bagging machine, suitable for the automated weighing and packing of fresh produce and other food products into bags. Designed for use within a commercial food-processing/packing environment and suitable for integration with an upstream weighing or feeding system. Hodpfszzzm Eox Al Aju

Condition: new, Maximum Lifting Capacity: The Krachtarmlift boasts an impressive lifting capacity of 600 kg, allowing heavy loads such as steel beams and lintels to be effortlessly moved and hoisted into position. Ease of Use: Thanks to the simple hand crank operation, loads can be lifted and positioned with minimal effort and with millimeter precision. Safety: Featuring a solid and stable construction, this lift provides maximum safety during operation. Mobility: Fitted with swivel casters, the lift can easily be moved to different locations on the construction site or indoors through door frames. The Krachtarmlift Lintel Lift MUBA is an indispensable tool on any construction site, designed to significantly simplify the lifting and positioning of heavy loads. Renowned for its robust build and user-friendly operation, this lift offers an efficient solution for handling beams, lintels, and other heavy construction materials. Hedpfjw Eu Hisx Al Asu Maximum lifting capacity and range: With a load capacity of 600 kg and a maximum height of 2.75 meters (with an optional adapter, the height can be extended to 3.00 m), the Krachtarmlift can lift heavy objects with ease. This makes it ideal for installing lintels and other structural elements at height. Easy to operate: The lift features a smooth and effortless hand crank mechanism, allowing loads to be positioned precisely without excessive physical exertion. The crank is ergonomically designed, ensuring lasting comfort during prolonged use. Safety first: Safety was a critical consideration in the design of the Krachtarmlift. Its robust base ensures stability, even at maximum load. Additionally, the wheels are equipped with brakes, keeping the lift securely in place during operation. Mobility and flexibility: Equipped with swivel casters, the Krachtarmlift can be easily moved by a single person. This makes it simple to transport the lift to various locations on the jobsite, contributing to overall efficiency and flexibility of operations.

Condition: like new (used), Year of construction: 2008, Tipping Device and Concrete Spreader VOLLERT WECKENMAN Year 2008 Never used Lifting device capacity: 5 tons. With synchronized control Concrete spreader cover: 7.5 tons, with internal blade auger Hodpfsxza Nfox Al Aou In perfect condition

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Hsdpfxoxftqds Al Aou Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: used, Westtech Woodcracker CS750 Smart Available immediately Features: - Endless rotating tiltator - Cutting diameter: 750 mm - Gripper opening width: 1,280 mm Hjdpjyfqz Uofx Al Aju - Own weight (basic/fully equipped): 820/980 kg - Recommended hydraulic flow rate: 65–110 l/min - Recommended operating pressure: 230–280 bar - Carrier vehicle operating weight: 15–30 t - Saw box: actively suspended - Saw chain lubrication: grease - Optional: Power tiltator, endlessly rotatable Multiple units in stock / fits perfectly on Magni RTH 6.30 SH & Magni RTH 6.35 SH. Can also be supplied in combination with a Magni machine. Also compatible with Merlo. We are official Westtech Woodcracker sales and service partners, Magni telehandler sales and service partners, JCB construction equipment sales and service partners, Mercedes-Benz service partners, Iveco service partners, and with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range! Rental available = Further information = New: Yes Contact Tobias Ebert for more information.

Condition: used, For enquiries about the attachment, Mr. Herden will be happy to assist you (by phone). Kinshofer Pallet Clamp / Block Stacking Clamp / KM 332 V – 1100 / NEW Price: €8,790.00 net / €10,460.10 gross Insertion depth (mm): 1,100 – 1,650 Load capacity at min./max. insertion depth (kg): 1,900 / 1,350 Opening width A min./max. (mm): 400 – 1,400 Height (without motor) (mm): 1,315 – 1,865 Weight (without clamping rails) (kg): 340 Operating pressure at flow rate: 20 – 26 MPa (200 – 260 bar) at max. 75 l/min and 20 – 37 MPa (200 – 370 bar) at max. 40 l/min The technically advanced KM 332 block stacking clamp offers versatile usage for both palletized and non-palletized building materials. - Fixed or adjustable insertion depth with hydraulically operated parallel opening and closing grab arms. - Versatile application thanks to opening widths from 400 mm to 1,400 mm, ideal for loading single concrete elements such as kerbstones as well as complete brick packs. - Adjustable insertion depths – perfect for loads with varying heights. - Synchronisation of the grab arms by two hydraulic cylinders, interconnected via a differential system. - Safety ensured by an overpressure valve in the hydraulic system to protect against overload. A check valve prevents release of the clamped package, even in the event of pressure loss in the carrier. - Durability thanks to generously sized bearings, integrated lubrication reservoir, automatic main bearing wear compensation, and spherical central cylinder mounting. We have a large selection of various attachments immediately available from stock! Mr. Herden (Tel.) will be happy to assist you. On request, we are pleased to provide you with a tailored financing offer. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. Hjdpjyfm Ecjfx Al Aeu We are an official Iveco sales and service partner. With 800 used commercial vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. Subject to prior sale and errors excepted! = Further Information = New: Yes Please contact Tobias Ebert for further information.

Year of construction: 2006, operating hours: 704 h, condition: used, Rental possible Hedpfxsyxkm Ee Al Aju = Further information = Contact Tobias Ebert for more information.

Condition: new, functionality: fully functional, Year of construction: 2025, Vacuum Lifter for Forklift – Safely and Quickly Move Large Wooden Beams! Are you looking for an efficient and safe way to move large, heavy wooden beams with your forklift? This vacuum lifter attachment makes heavy work easy and immediately saves valuable time on the shop floor. With this professional vacuum lifter, you can effortlessly lift and move long wooden elements without damaging the wood or causing physical strain on your staff. It is an ideal, ergonomically friendly solution for sawmills, timber merchants, carpentry workshops, and the construction industry. Product Features & Benefits: - Easy to mount on the forks of a forklift Hedpfx Alszb U Nho Aou - Powerful vacuum suction for a firm and secure grip - Suitable for long and heavy wooden beams/panels - Prevents damage to the material - Increases productivity and improves working conditions (ergonomics) 📍 This vacuum lifter is currently for sale!

Condition: used, Year of construction: 2004, machine/vehicle number: 90380, Edgebanding machine, year of manufacture 2004 Hsdpfxoxxzk So Al Aou

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: SCK 60 0 0 00 10 318 98 5, empty load weight: 680 kg, maximum load weight: 2,820 kg, overall weight: 3,500 kg, axle configuration: 2 axles, permissible axle load (axle 1): 1,750 kg, permissible axle load (axle 2): 1,750 kg, first registration: 07/2001, next inspection (TÜV): 03/2028, suspension: steel, tire condition: 85 %, maximum speed: 100 km/h, color: grey, trailer brake: trailer braked, Year of construction: 2001, operating hours: 300 h, Equipment: trailer coupling, from the vehicle registration document "permissible drawbar load, kingpin load or axle load in compliance with the total weight: drawbar load 150 kg, 1st axle 1750 kg, 2nd axle 1750 kg, tandem axle 3500 kg" 2 movable ramps; non-slip birch plywood floor; threaded support wheel; overrun brake; manual cable winch; rear fog light; 8 lashing hooks; 4 recessed, folding lashing rings; 2 wheel chocks; Extra: 2 motorcycle mountings with screw fixation Hodpfx Aeyvul Tjl Aeu

Condition: like new (used), functionality: fully functional, fuel type: electric, overall weight: 900 kg, lifting height: 26 mm, drive condition: 100 %, Year of construction: 2025, hydraulic flow rate: 9,000 l/min, For sale is a new, unused, ex-display EVAK ETP submersible slurry pump, designed for pumping heavy and highly abrasive slurries. This pump offers an attractive price alternative to slurry pumps of a similar class offered by TOYO and Dragflow. It is designed, among other applications, for pumping mixtures of water with sand, sludge, gravel, bentonite, slag, coke, and other sediments containing heavy solid particles. It can be used for desilting tanks, cleaning sedimentation tanks, extracting aggregates and minerals, and in construction and dredging works. The pump is equipped with a mechanical agitator, which stirs up the material at the bottom and facilitates its transport to the impeller. The components most susceptible to wear – the impeller, the inlet plate, and the agitator – are made of high-chromium steel containing 24–28% chromium. The low-speed, six-pole motor, operating at 960 rpm, reduces the wear of hydraulic parts when working with abrasive materials. The pump has a closed impeller, replaceable wear plates, and adjustable clearance for the lower plate. Key parameters: Motor power: 37 kW Power supply: 400 V / 50 Hz Rated current: 71 A Maximum flow rate: up to 550 m³/h Maximum head: up to 26 m Maximum solid particle size: 60 mm Allowable dry solids content: up to 50% by weight Rotational speed: 960 rpm Motor insulation class: F Maximum medium temperature: 40°C Maximum immersion depth: 20 m Hodpozlz T Hjfx Al Aeu Power cable: 20 m, H07RN-F Direct-on-line (DOL) starting or soft-start/inverter starting is possible. Factory-installed suction basket and agitator. Condition of the equipment – the pump is: new and unused an ex-display unit covered by a 60-day start-up warranty available for immediate sale.

Condition: good (used), Year of construction: 2011, lifting height: 31,630 mm, fuel type: diesel, Empty weight: 31.200 kg Lifting capacity: 1.000 kg Working height: 3.363 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: NL Please contact Christian Theißen for more information Manufacturer: Holland Lift Model: G-320DL30 4WDS/N Year of build: 2011 Condition: Used Data: Hsdpfx Asz D Txijl Aeu Max. working height: 33,63 m Max. platform height: 31,63 m Lifting capacity: 1000 kg Lifting capacity on extension: 1000 kg Drive type: Diesel Platform dimensions LxW: 6,56 x 2,68 m Platform length pushed out: 9,56 m Total dimensions LxW: 7,05 x 3,01 m Transport height with / without railing: 3,62 / 2,87 m Movable up to working height: 33,63 m Ground clearance: 0,21 m indoor use only: nein Empty weight: 31.200 kg Special features: White tires, automatic outrigger leveling, 230V connection on platform, hydraulic outriggers, 4-wheel steering, all-wheel drive, anchor points for restraint systems (PPE) provided.

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Hodpfjzav D Dox Al Aeu Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Hedpfx Aeyzf Naol Aju Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.