Used milling machines - univ.NC/CNC 0-399mm X-axis travel for sale (20)

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg Nkodoydvzdopfx Aacju can be demonstrated if required

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar Nodevt D D Uepfx Aacoku - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 3 Pro CNC milling machine (training machine) directly from the manufacturer. F 3 PRO - The OPTIMUM CNC milling machine with Siemens control SINUMERIK 808D Advanced is characterized by performance, speed, precision and long service life. All linear guides with stainless steel covers Automatic central lubrication Servo drive from SIEMENS in all axes (open control loop) Max. Spindle speed 4000 min-1 Machine light in the work area Portable, electronic handwheel with enabling switch and emergency stop switch. Makes running in programs considerably easier Tools can be changed at the touch of a button Access doors very generously designed to reduce cleaning and maintenance time to a minimum Software package "SINUMERIK 808D on PC" included. (Practical training software so that workpieces can be programmed and simulated offline on the PC. Software can be downloaded free of charge at). SINUMERIK 808 ADVANCED - CNC technology from the technology leader, paired with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC control. The compact and user-friendly entry-level solution is used for simple milling applications. Features such as simple operation, commissioning and maintenance are the perfect basis for equipping CNC machines. Compact and robust Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments. The small dimensions allow it to be used in compact machines INCLUDED RJ45 Ethernet port 8.4" LCD color display with 800 x 600 resolution Prepared for remote maintenance Dimensions and weights Length approx. 1410 mm Width/depth approx. 1372 mm Height approx. 2007 mm Weight approx. 1000 kg Drilling/milling capacity Cutter head size max. 50 mm End mill size max. 25 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 5 kVA Horizontal milling table Length 620 mm Width 180 mm Distance vertical spindle - milling table min. 50 mm Distance vertical spindle - milling table max. 295 mm T-slots size 12 mm Number of T-slots 3 T-slot spacing 50 mm Nkedpfxoymkkfo Aacju Load max. 30 kg Accuracy Repeat accuracy ± 0.02 mm Positioning accuracy ± 0.01 mm Coolant system Coolant pump(s) Drive power 95 W Tank capacity 30 l Travel distance X-axis automatic 355 mm Y-axis automatic 190 mm Z-axis automatic 245 mm Vertical spindle Spindle holder BT 30 Speed range 4000 min¯¹ Explanation Speed range Please note that the maximum spindle speed must be reduced by approx. 20 % in continuous operation Power drive motor continuous operation S1 1.5 kW Power drive motor S6-30 % operation 2.2 kW Torque drive motor continuous operation S1 9.5 Nm Torque drive motor 30% operation S6 14 Nm Feed rate Speed X-axis 10000 mm/min Y-axis 10000 mm/min Z-axis 10000 mm/min Feed motor torque X-axis continuous operation S1 1.9 Nm Y-axis continuous operation S1 3.5 Nm Z-axis continuous operation S1 3.5 Nm

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine, direct from the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control stands out with its power, speed, precision, and long service life. • Machine in rigid cast frame design for high stiffness • Carousel tool changer with eight tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive on all axes (closed loop) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel with enabling button and emergency stop facilitates program setup significantly • Coolant system with 70-liter coolant tank • Tool change is automatic or by button press (electropneumatic tool clamping system) • Massive, precision-milled work table – large and precisely ground surface • Large access doors designed to minimize cleaning and maintenance time • LED machine light for complete workspace illumination • SIEMENS options package with material defect liability and free on-site OSS service SINUMERIK 808D • Control-identical software package for process reliability • LED tool number display • MCP with rotary switch for feed and spindle override • Absolute encoders – no homing run required • Higher accuracy Control system • 8.4” LCD color display with 800 x 600 resolution SIEMENS OSS options package • 12 months; Item No. 3589010 • 36 months; Item No. 3589012 Dimensions and weights Length approx. 2030 mm Width/depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 10 kVA Work table horizontal Length 690 mm Width 225 mm Vertical spindle-table distance min. 90 mm Vertical spindle-table distance max. 410 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 63 mm Max. load capacity 150 kg Accuracy Repeat accuracy ± 0.015 mm Positioning accuracy ± 0.015 mm Pneumatic connection Operating pressure 6 bar Travel X-axis automatic 330 mm Y-axis automatic 220 mm Z-axis automatic 320 mm Spindle-column distance min. 280 mm Spindle-column distance max. 280 mm Vertical spindle Spindle taper BT 30 Speed range 10,000 rpm Drive motor power continuous operation S1 3.7 kW Drive motor power S6-30% duty 5.5 kW Drive motor torque continuous operation S1 24 Nm Drive motor torque 30% duty S6 36 Nm Feed rates X-axis 15,000 mm/min Nsdpfx Aaeymkdxjcjku Y-axis 15,000 mm/min Z-axis 15,000 mm/min Feed motor torque X-axis continuous operation S1 3.5 Nm Y-axis continuous operation S1 6 Nm Z-axis continuous operation S1 6 Nm Tool changer Type: carousel Number of tool stations: 8 Maximum tool diameter: 100 mm Maximum tool length: 200 mm Maximum tool weight: 6 kg Tool-to-tool change time: 7 s

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Nkjdpfx Aaoya H Nksceu Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, The LabCenter 260 CNC is a robust and compact Vertical Machining Center designed specifically for CNC training and the production of small workpieces. This innovative machine offers the full functionality of larger production machines while being mobile and professional, making it ideal for laboratories and training environments. Equipped with the SIEMENS 808D Advance control, the LabCenter facilitates an intuitive introduction to CNC applications. It boasts a continuously variable main spindle speed of up to 5000 revolutions per minute and features precisely machined cast iron frames, durable dovetail guides, and preloaded ball screws with servo drives on all axes. With a maximum travel of 160 mm on the X-axis and a table size of 400x145 mm, this C-Frame Vertical CNC Center enhances productivity with its efficient 4-station tool changer and mobile base, which allows for convenient tool and material storage. Ensure seamless operation with the included electronic hand-wheel, central lubrication, and comprehensive operating manual. KNUTH guarantees quality and precision in all aspects. To experience the benefits of this Vertical Machining Center, order online today. Nedpsuy Ihhefx Aacsku

Condition: used, Year of construction: 1989, x-travel 300 mm Nedpfxsx Ndbqo Aaceku y-travel 300 mm z-travel 400 mm CNC-control DIALOG 11 spindle taper ISO 40 spindle turning speed range 31 - 5.000 U/min table-size 620 x 390 mm table load 250 kg power capacity 5,5 kW feeds -stepless- 2 - 6.000 mm/min quill stroke 80 mm voltage 380 V total power requirement 11,0 kVA weight of the machine ca. 1,65 t dimensions of the machine ca. 1,85 x 1,90 x 1,80 m electric cabinet 1,35 x 0,70 x 1,70 m - Serial-No.: 2836-0175 - control: DIALOG 11 - electrical hand wheel - horizontal milling spindle - coolant equipment

Condition: good (used), Year of construction: 2007, operating hours: 1,211 h, functionality: fully functional, machine/vehicle number: Q1FV4302, table load: 20 kg, overall weight: 700 kg, 4-Axis Milling Machine Emco Concept MILL 155 – for Small Parts Production Description Manufacturer Emco Model ConceptMill 155 Nsdpfeymy R Iox Aacjku Year of manufacture 2007 Specifications: Travel X-axis: 300 mm Travel Y-axis: 200 mm Travel Z-axis: 300 mm Min. distance spindle nose – table surface: 85 mm Max. distance spindle nose – table surface: 285 mm Table dimensions (L x W): 520 x 180 mm T-slots: number, width, pitch: 3 x 12 x 45 mm Max. table load: 20 kg Max. feed force: 2500 N Number of tool stations: 10 Tool selection: directional logic Max. tool diameter: 70 mm Max. tool length: 200 mm Machine dimensions (L x W x H): 1502 x 1284 x 1925 mm Weight: 700 kg Required compressed air: 6 bar Additional equipment Walter NC indexing device

Condition: good (used), Manufacturer: Mikron Kunzmann | Model: WF 3SA | Serial number: 09-100597 | Axes: X / Y / Z | Digital position display for X, Y, and Z axes | Cross table with T-slots | Mechanical feed in X, Y, and Z directions | Vertical milling head | Speed adjustment via stepped gear | Electromotoric main drive | Coolant system present | Separate control panel; TNC 114 control | Machine vise and cabinet with accessories; | Dimensions: approx. 1800 mm x 1300 mm x 1600 mm (HxLxD) | Stated dimensions are approximate. All other information without guarantee. | Green | Steel Nedpoyibv Ujfx Aacoku

Condition: used, Year of construction: 2007, Milling machine Röders RXP 800 DS, year of manufacture 2007 Nkodpfjyiln Ujx Aacju

Condition: used, Maho 700 and 900C milling machines Nkjdpfx Aaoxuduxecou

Condition: used, Year of construction: 2011, Milling machine Quaser MV 184, year 2011. The machine is sold complete, as shown in the pictures. Includes hydraulic vices, power unit, chip conveyor, belt filter system and extraction unit. Nodpfxjyfm T Hs Aacjku

Condition: used, Year of construction: 2015, Maho MH-C 800 milling machine. The machine underwent a retrofit in 2015. The machine is connected to the power supply and can be inspected. Njdpjw D Hdksfx Aaceku

Condition: good (used), Offered for sale is a partially overhauled DECKEL FP1 Aktiv universal milling machine, equipped with a 3-axis Heidenhain digital readout TNC 113 and a dividing rotary table with a three-jaw chuck. Thanks to its compact design, this machine is ideal for smaller hobby workshops or garages. Manufacturer: DECKEL Model: FP1 Machine no.: 2102-3314 - Travel X/Y/Z 300 x 160 x 340 mm - Spindle speed range 40–2000 rpm - Stepless feed in all three axes - Rapid traverse in all three axes Nkodpfxoxmggue Aaceu - Vertical milling head - 100 mm adjustable vertically - Horizontal milling attachment - 3-axis Heidenhain digital readout TNC 113 - Coolant system - Dividing rotary table with a three-jaw chuck Total power requirement: 1.9 kW Machine dimensions (L x W x H): 1.30 x 1.10 x 1.60 m Weight: approx. 850 kg Price is quoted net, ex-works, loaded. Condition: Used.

Condition: good (used), Year of construction: 1983, functionality: fully functional, Universal Production and Tool Milling Machine Type: UWF 700 PH Nsdpfx Aaox Ry Atecsku Machine No.: 5670 Serial No.: 034650 Year of manufacture:1983 Control system: Positioning and path control incl. display HEIDENHAIN TNC 135 3-axis manual input control TECHNICAL DATA Working area X-axis (longitudinal) manual/automatic: 410/390 mm Y-axis (transverse) manual/automatic: 310/290 mm Z-axis (vertical) manual/automatic: 400/380 mm Quill travel vertical: 63 mm Clamping surface, vertical: 830 x 224 mm Number of T-slots: 4 Angular table clamping surface: 700 x 285 mm 6 T-slots: 12 H8/45 mm Workpiece weight: 200 kg Distance table – spindle nose (vertical): 0 – 515 mm Distance table – spindle center (horizontal): 30 – 565 mm Drive power (at 1500 rpm): 2.2 kW Speed range: 45 – 2000 rpm Number of speeds: 12 Speed progression (geometric steps): 1.4 Tool holder (DIN 2079): ISO 40 Feed range (all axes): 2 – 1500 mm/min Rapid traverse (all axes): 1.5 m/min Operating voltage: 380 V/50 Hz Machine dimensions: 1.2 x 1.6 x 1.7 m Space required: 2.1 x 2.1 m Machine weight: 1100 kg EQUIPMENT / ACCESSORIES  Hand operation and CNC program control  Vertical and horizontal machining  Swiveling vertical milling head  Adjustable-angle vertical milling head  Various tool holders  Manual quill feed (vertical)  Angular table 700 x 285 mm  Coolant system  Coolant and chip tray  Electrically secured chip guard in work area  Mounting elements  Machine lamp  Documentation Condition: Control system overhauled, workshop tested

Condition: repair required (used), Year of construction: 1987, For sale is a small milling center of the brand Maho and type 300 C The power supply unit is defective but can be repaired Technical data: YEAR OF MANUFACTURE 1987 Type: MH 300 C CNC control Phillips 432 Table: 550x275 mm Nksdeir U H Ejpfx Aacju Travel x/y/z : 300/350/220 mm SK 40 holder Spindle speed: 20-4000 rpm Main drive: 3.3 kw Rapid traverse: 3 m/min Quill stroke: 50 mm Dimensions: 2000 x 2000 x 2000 mm Weight: approx. 1900 kg Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, mount diameter: 30 mm, total height: 1,800 mm, total width: 950 mm, total length: 2,000 mm, table width: 120 mm, table length: 420 mm, Operating voltage: 230 V Frequency: 50 – 60 Hz Rated current: 2.8 A Control: EMCO EASY 2 CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840) Tool holder: presumably SK 30 Max. tool clamping length: 35 mm Table dimensions: 420 x 120 mm With 2 slots and a special EMCO vise Jaw width: 60 mm Travel distances: X: approx. 190 mm Y: approx. 140 mm Z: approx. 260 mm Including suitable mobile workbench with various matching contents Including 7-position tool changer, collets, and various suitable tool holders Nkedpfxsw Ivu Eo Aacju

Condition: used, Univ. NC tool milling machine KUNZMANN type WF 3/4 Machine. No. 341020 Year of construction 1998 Travel X: 400 mm Y: 320 mm Z: 400 mm Table size 650 x 350 mm Spindle holder SK 40 Spindle speed 40 - 2500 rpm. Feed rates X, Y and Z-axis 0 - 1000 mm/min. infinitely variable Rapid traverse X, Y-axis 4000 mm/min. Rapid traverse Z-axis 3000 mm/min. Vertical pinol adjustment 60 mm Nkodpelvyrbjfx Aacju Drive power spindle motor 3 KW Mains connection 400 Volt, 50 Hz - CNC line control Heidenhain TNC 124 - Spindle speed via 2 gear stages and infinitely variable via electronically controlled variator gearbox - Vertical milling head can be tilted +/- 90 - Hydraulic tool clamping - Fixed angled table - Control cabinet fixed to the machine - Coolant tank with pump adjacent - central lubrication - central lighting Space requirement L x W x H 1800 x 1800 x 1900 mm Weight 1300 kg Good condition

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,300 h, functionality: fully functional, machine/vehicle number: Q4A124301, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Working Area Travel X-axis: 350 mm Travel Y-axis: 250 mm Travel Z-axis: 300 mm Min. distance spindle nose – table: 120 mm Max. distance spindle nose – table: 420 mm Table Clamping surface: 500 x 300 mm T-slots (number/size/pitch): 5x 45x100 mm Nodsxa Araspfx Aacsku Max. table load: 100 kg Table – floor distance: 880 mm Spindle Speed range: 50 – 10,000 rpm Spindle motor power (S6): 8.5 kW Spindle torque (S6): 41 Nm Tool holder: ISO 30 Tool Change Number of tool stations: 20 Max. tool diameter: 63 mm (without adjacent tools) Max. tool length: 200 mm Max. tool weight: 5 kg Tool change time: 2.5 s MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 1,600 x 1,700 x 1,980 mm Weight: 1,970 kg Power supply: 9 kVA Operating hours: 17,300 h EQUIPMENT 30 holders 2 Gressel vices Note: The machine will remain powered until 21.09.2025.

Condition: like new (used), Year of construction: 2016, operating hours: 290 h, functionality: fully functional, machine/vehicle number: F1F 161101, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, rotational speed (max.): 14,000 rpm, Milling machine including engraving spindle and 4th axis, as well as automation setup! The machine was used for training purposes and has only approximately 290 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive: Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Njdpfx Aaev Ip Izjceku Average position variation: 0.008 mm MACHINE DETAILS Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg Spindle hours: 290 h EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic handwheel - Swivel table with keyboard extension - Pneumatic vise 72 mm - 4th axis with three-jaw chuck - Engraving spindle unit (4:1 ratio) including 6 collets (1/1.5/2/2.4/3/3.2 mm) and union nut - Pneumatic automatic door and clamping device - I/O expansion board, robotics and DNC interface - Comprehensive tool set for operation, operating manual with spare parts list