Used Continuous Beam Facility for sale (11,134)

Condition: used, tank capacity: 5,000 l, GENERAL INFORMATION Equipment: Ball valve Design: Suspended Remarks: Top cover made from V2A (1.4301); 4 support feet made of steel; minor material wear inside the vessel Internal diameter: 1,880 mm Total height: 3,550 mm Heating/Cooling: present Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: Removable / hinged top cover Agitator type: Beam agitator Stand type: Feet Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Volume: 5,000 liters Cylinder wall thickness: 10.2 mm Product-contacting material: V4A 1.4429 (AISI316) Condition: Used Cylindrical height: 1,580 mm Last application: Chemical industry Kedpfjxqawuex Ahzswt HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manway / Dome: On the top cover (Ø 450) Outlet: DN40 DIN 11851 Note: Light residues, motor/gearbox missing MATERIAL SPECIFICATION Top cover material: AISI304 (V2A) 1.4301 Temperature control system material: V2A 1.4301 (AISI304) Flange material: Steel AGITATOR 1 Agitator manufacturer: Fluid TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8.3 mm Agitator arrangement: Centered in top cover Top cover wall thickness: 4.5 mm

Condition: used, tank capacity: 5,650 l, GENERAL Equipment: Lifting lugs Design: Suspended Remarks: Lugs made of steel; the insulation jacket has partially detached in the area of the lower base (see photos) Speed: 55.8 rpm Outer diameter: 2,100 mm Inner diameter: 1,800 mm Explosion-proof: Motor is explosion-proof (compliance with current ATEX guidelines under local conditions must be verified) Overall height: 3,750 mm Heating/Cooling: available Kwedpfexqah Hex Ahzst Insulation: available Power: 2 kW Max. permitted operating temperature: 200 °C Max. permitted operating overpressure: 6.0 bar Max. excess pressure: 3.2 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Beam agitator Support design: Feet Location: Bremen Cylinder tempering: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 5,650 liters Double jacket volume: 166.0 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Last intended application: Pharmaceutical chemistry VESSEL Max. permitted operating temperature: 200 °C Number of legs: 4 pieces HEATING/COOLING JACKET Bottom tempering: Half-pipe coil INSULATION Insulation jacket: bolted Insulation material: PU foam Insulation jacket material: galvanized steel EQUIPMENT Manhole/dome: in top head (DN 500) Outlet: 140 mm MATERIAL SPECIFICATION Tempering system material: V2A 1.4301 (AISI304) AGITATOR 1 Voltage: 220/380 Volt Agitator mounting: central in the top head Agitator equipment: Provisions for flow breakers inside the vessel (flat plates for flow breakers not present; see photos)

Condition: used, tank capacity: 60,000 l, GENERAL Equipment: Venting, spray head, crane lugs Design: Upright Outer diameter: 3,880 mm Inner diameter: 3,700 mm Total height: 9,200 mm Insulation: available Agitator: Beam agitator Base type: Skirted base Location: Outdoor storage Volume: 60,000 liters Kodpfx Ahjx Dmcqjzjwt Product-contact material: V2A 1.4301 (AISI304) Condition: used Last previous application: Food TANK Bottoms: Conical bottom EQUIPMENT Manhole / dome: in the shell AGITATOR 1 Bottom bearing: Agitator arrangement: eccentric on top head

Condition: used, Year of construction: 2006, tank capacity: 10,000 l, GENERAL INFORMATION Equipment: Crane lugs Design: Vertical Year of manufacture: 2006 Remarks: Nameplate no longer available; cylinder manhole diameter 600 mm; minor dent on the side of the vessel Internal diameter: 2,500 mm Total height: 3,800 mm Power: 3 kW Top head: Flat bottom Agitator: Beam agitator Support design: Height-adjustable feet Location: Outdoor storage Technical documentation: Drawing Volume: 10,000 liters Cylinder wall thickness: 3 mm Product-contact material: V4A 1.4401/04 (AISI316) Kodpfx Ahex Dmbajzjwt Condition: Used Cylindrical height: 2,000 mm Last product processed: Sludge VESSEL Max. allowable operating temperature: 80 °C Specific gravity of medium: 1.8 (to/m³) Bottom head: Conical bottom Number of feet: 3 pcs EQUIPMENT Manhole/Dome: In cylinder, in top head (Ø 430 mm) Outlet: Flange DN80 Note: Minor residues MATERIAL SPECIFICATION Foot material: Stainless steel AGITATOR 1 Agitator manufacturer: Fluid Voltage: 380/660 volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm Agitator positioning: Eccentric in top head

Condition: good (used), Year of construction: 2005, total length: 4,200 mm, total width: 2,500 mm, total height: 1,800 mm, product height (max.): 4 mm, overall weight: 7,000 kg, Capacity 4 mm, cutting length 3050 mm, motor 18,5 KW, mot. back gauge, shadow line, frontarms with scale, foot pedal, pneumatic rear support, new IMEX SPS-control, dimension 420x250x180 cm, weight ca. 6500 kgs Kedpfstp I S Aex Ahzjwt

Condition: ready for operation (used), General Location Kundl (Austria) Condition used Tank volume 118,000 liters Vacuum 0.25 bar Max. Overpressure 0,99 bar Floors dished bottom Construction form upright Stand frame Insulation insulation available insulation jacket riveted Technical data / dimensions Diameter inside 4,410 mm Diameter outside 4,700 mm Cylindrical height 6,500 mm Total height 10,860 mm Equipment Technical documents Drawing Manhole / dome in cylinder, in top Type plate Outlet Flange DN100 Kedpol Avmcefx Ahzewt Material Properties Material in contact with product V4A 1.4571 (AISI316)

Condition: used, Hydr. swing cut guillotine shears HERA type HSS III No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Stand projection 200 mm Blade strokes 25 strokes/min. Mains connection 380 Volt, 50 Hz Motor power 3 kW - Motorized adjustable backgauge 1070 mm - Actual value digital display for the backgauge - Cutting gap adjustment - Cutting length adjustment Kodpjq A I Upjfx Ahzjwt - Front side stop left 1000 mm - 4 sheet metal support arms 1000 mm - el. foot switch Space requirement without sheet support arms L x W x H 3630 x 2200 x 1600 mm Weight approx. 4000 kg good condition

Condition: used, Load capacity 10t Kjdpstq Siijfx Ahzewt

Condition: used, Year of construction: 2002, Empty weight: 75 kg - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 991 - Voltage [V]: 230 - Current consumption [A]: 0.07 Kodpfxjwtx Ums Ahzowt - Power [kW]: 0.1 - Transport weight [kg]: 75kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, functionality: fully functional, Year of construction: 2026, Beam extensions for gantry cranes – increase the reach of your crane Beam extensions are professional accessories for gantry cranes that allow you to increase the working width of the structure. They are used wherever the standard crane width is insufficient – particularly in wide production halls, warehouses and industrial facilities. Manufactured from durable and resistant materials, they ensure reliability and long service life even in intensive working environments. Greater functionality and safety The extensions allow for easy adaptation of the crane to individual requirements, expanding its range of applications without the need to purchase a larger model. The maximum lifting capacity of the crane with extensions is 800 kg. However, it should be noted that when the extension exceeds 200 mm, the load capacity is further reduced. For this reason, it is essential to follow the manufacturer’s guidelines and carry out regular technical inspections of all crane components, including the extensions. Key product features: Enable quick and safe increase of the crane’s working width Simple installation – the set includes two extensions ready for mounting Robust construction – high-strength steel profiles Operational safety – compliant with industrial standards and health and safety requirements Compatible with CORMAK gantry cranes and other structurally compatible models Usage guidelines: Gantry crane extensions should be used in accordance with the manufacturer’s recommendations, particularly with regard to the reduction in load capacity after installation. The minimum extension width is 200 mm, and each additional increase results in a further reduction of the maximum lifting capacity. Regular technical inspections and proper maintenance are essential to ensure full operational safety. Applications of beam extensions The product is ideally suited for industries such as logistics, industrial manufacturing, steel structure assembly, the automotive industry and others. Versatility, durability and build quality make it an excellent choice for companies that expect flexibility and reliability from their equipment. Kwsdpfsycqh Nex Ahzot By choosing CORMAK beam extensions, you invest in efficiency, functionality and safety. Extend the capabilities of your gantry crane and adapt it to changing production or warehouse requirements! Technical parameters: Length 520 mm Width 131 mm Height 70 mm Number of pieces per set 2 Set weight 20 kg

Year of construction: 2012, condition: excellent (used), Now available: Mueller Apparatebau 6612 cutting system with complete pile stacking line This machine is equipped wih following for processing continues feed, cutting and stacking - unwinder - Mueller apparatebau merger - Mueller apparatebau cutting system - Mueller apparatebau automatic collating table - Mueller apparatebau output belt Kodpshx Rkcofx Ahzjwt Now available for a very good price!

Condition: refurbished (used), Schon Kaev 6005 Hydraulic Cutting Machine with Returning Hammer Pressing force: 40T Working area: 1600mm x 650mm Motor: 5.5kW Maximum clearance: 220mm Stroke: 15mm - 180mm Weight: approx. 3500kg Kedpfxjya Twuj Ahzewt Complete manufacturer's documentation included Machine in very good technical condition, fully serviced

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,672 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,900 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 4,000 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 355X65-15, overall weight: 9,800 kg, empty load weight: 6,800 kg, total height: 2,550 mm, total length: 2,100 mm, total width: 2,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, pallet forks, sideshift, 🔶 COMBILIFT C3000XL – 2011 – 5672 HOURS – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 Kwodpfxsybaluj Ahzst 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for operation. No compromises. This COMBILIFT C3000XL is not just a machine — it is a guarantee that your logistics will proceed smoothly, reliably, and without interruption. Designed for demanding applications and fully reconditioned both technically and visually, the forklift presents as new and is ready for immediate use. 📌 Key Technical Data: 📅 Year of manufacture: 2011 ⏱️ Operating hours: 5672 🔥 Drive: LPG 💪 Load capacity: 3000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1340 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Super elastic (100%) 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2550 mm | Length 2100 mm | Width 2300 mm 📦 Overall height: 2900 mm 🛞 Tyres: SE – Front 23x10-12 | Rear 355x65-15 🏗️ Free lift: 2000 mm 📦 Perfect for: 📚 Narrow aisle warehouses 🪵 Steel, timber and pipe industries 📏 Handling long loads 🏭 Indoor and outdoor operations FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 3,310 h, load capacity: 4,000 kg, lifting height: 4,100 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, motor manufacturer: KUBOTA V2403-T, gearing type: hydrostat, fork carriage width: 4,000 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,100 kg, empty load weight: 6,100 kg, total height: 2,400 mm, total length: 2,300 mm, total width: 2,300 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🔶 COMBILIFT C4000 – 2017 – 3310 HOURS – DIESEL – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for operation. No compromises. This COMBILIFT C4000 is not just a machine — it is a guarantee that your logistics will run smoothly, reliably, and without downtime. Designed for demanding working environments and fully serviced both technically and visually, the truck presents itself as new and is ready for immediate use. 📌 Key technical specifications: 📅 Year of manufacture: 2017 ⏱️ Operating hours: 3310 🔥 Drive: Diesel 💪 Lifting capacity: 4000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1320 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Superelastic (100%) 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2400 mm | Length 2300 mm | Width 2300 mm 🏗️ Overall height: 2800 mm 🛞 Tyres: SE – Front 200/50-10 | Rear 27x10-12 📦 Ideal for: 📚 Narrow-aisle warehouses 🪵 Wood, steel, and pipe industry Kwsdpfx Aoybahpjhzst 📏 Handling long loads 🏭 Indoor and outdoor use FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: good (used), Frame: 6500*1050*93 mm Beams 2800*110 CE mm, 2400 kg/level Kwedpfx Ahodlnk Tszst If you require racks or accessories in other configurations or designs, please contact us. Shipping: To receive a freight quote, please provide your postcode, location, and the desired quantity of items.

Condition: excellent (used), Double STDN pancake baking carousel system. Superb system designed for reliable high volume production of pancakes and crepes, blinis etc. Extremely hard to find on the used market. diameters can be adjusted from 30mm to 240mm and weights from 8g to 100g. New cost of this system is in excess of 500,000. We also have a continuous waffle manufacturing line for sale. Kwjdpfexlra Rjx Ahzjt

Condition: used, machine/vehicle number: 008215, Max working length: 2300 mm Kodjx A Tihepfx Ahzewt Max working width: 1300 mm Pressure Exerted: 15 Kg/cm2 No of Pressing cylinders: 4 No of Daylights: 10

Condition: good (used), Code: 0279 Brand: ALBERTI V. Model: PCC 33/18 Continuous cycle hot press for veneering, furniture, doors, panels, composite materials and various Max working length 3300 mm Max working width 1800 mm Opening 200 mm N° 6 pistons diameter 100 mm Solid platens Kodpsx I Nz Hefx Ahzswt Diathermic oil heating Loading conveyor

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,672 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,900 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 4,000 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 355X65-15, overall weight: 9,800 kg, empty load weight: 6,800 kg, total height: 2,550 mm, total length: 2,100 mm, total width: 2,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, pallet forks, sideshift, 🔶 COMBILIFT C3000XL – 2011 – 5672 HOURS – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 Kjdpfx Aoyal Ekohzowt 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for operation. No compromises. This COMBILIFT C3000XL is not just a machine — it is a guarantee that your logistics will proceed smoothly, reliably, and without interruption. Designed for demanding applications and fully reconditioned both technically and visually, the forklift presents as new and is ready for immediate use. 📌 Key Technical Data: 📅 Year of manufacture: 2011 ⏱️ Operating hours: 5672 🔥 Drive: LPG 💪 Load capacity: 3000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1340 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Super elastic (100%) 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2550 mm | Length 2100 mm | Width 2300 mm 📦 Overall height: 2900 mm 🛞 Tyres: SE – Front 23x10-12 | Rear 355x65-15 🏗️ Free lift: 2000 mm 📦 Perfect for: 📚 Narrow aisle warehouses 🪵 Steel, timber and pipe industries 📏 Handling long loads 🏭 Indoor and outdoor operations FT LOGISTICS – Quality you can rely on. Service you can trust.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2025, Ice water facility L 100 model Recommended batch size up to: 30 liters Continuous output * (cooling output): 60 liters Peak cooling performance * with ice bank: 180 liters / h Ice bank: 20kg Cooling capacity (CECOMAF) t = -5 ° C: 1189 W Voltage: 230V; 50Hz Power consumption: 575W Water connection: 1/2 " Water flow at 2 bar: 8 liters / min Device dimensions L x W x H mm: 950 x 530 x 560 Weight empty / operation approx .: 60kg / 130kg Kwodefmcikspfx Ahzjt Energy consumption at 100 liters: 1-2 KWh NEW device with warranty * with + 17.5 ° C inlet and + 2.5 ° C outlet. Technical changes reserved. Option: Underframe Visit us at the Milbrandt outlet shop

Condition: used, functionality: fully functional, We currently have a Roundo bending machine available for sale. This machine is capable of bending large-size wide-flange beams — even when cold — into radii or cambered shapes. It is a robust and versatile unit, ideal for companies looking to enhance or expand their steel-forming capabilities. Kodpexn I Rwsfx Ahzowt

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), -300 mm x 2600 mm max. timber cross-section Kedscbq Nwjpfx Ahzjwt -circular saw blade D 900 mm determination of the value 8.000 € new flat motor 18.5 kW / 1450 r/min with flange 4.300 € new positioning gearmotor 1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount 8.500 € new electrical control cabinet 22.500 € without steel construction and without assembly -the special saw was only used for about 5 hours after the overhaul >>Made in West Germany 100% massive steel construction with movable portal and mounted saw unit from above, circular saw motor 18.5 kW, 1450 rpm with electronic brake travel drive 2.5 kW with frequency converter, travel speed infinitely variable saw blade max. D 900 mm, cutting height max. approx. 300 mm if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and completely covered. machine overhauled without additional safety devices >> The working width can also be increased by conversion

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 3,310 h, load capacity: 4,000 kg, lifting height: 4,100 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, motor manufacturer: KUBOTA V2403-T, gearing type: hydrostat, fork carriage width: 4,000 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,100 kg, empty load weight: 6,100 kg, total height: 2,400 mm, total length: 2,300 mm, total width: 2,300 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🔶 COMBILIFT C4000 – 2017 – 3310 HOURS – DIESEL – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for operation. No compromises. This COMBILIFT C4000 is not just a machine — it is a guarantee that your logistics will run smoothly, reliably, and without downtime. Designed for demanding working environments and fully serviced both technically and visually, the truck presents itself as new and is ready for immediate use. 📌 Key technical specifications: 📅 Year of manufacture: 2017 Kedpfx Ahox Tz D Rezowt ⏱️ Operating hours: 3310 🔥 Drive: Diesel 💪 Lifting capacity: 4000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1320 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Superelastic (100%) 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2400 mm | Length 2300 mm | Width 2300 mm 🏗️ Overall height: 2800 mm 🛞 Tyres: SE – Front 200/50-10 | Rear 27x10-12 📦 Ideal for: 📚 Narrow-aisle warehouses 🪵 Wood, steel, and pipe industry 📏 Handling long loads 🏭 Indoor and outdoor use FT LOGISTICS – Quality you can rely on. Service you can trust.

Year of construction: 1993, condition: used, machine/vehicle number: 93 - 034, Beam press for gluing blocks, max. pressing dimension 2,240 x 880 mm, motorized height-adjustable counter bearings, 4 pressure beams, can be switched on and off individually, 4 pendulum grids, Kedeul Uy Hspfx Ahzewt ex location Seevetal, Sold in "as is" condition as viewed, without transportation, subject to prior sale

Condition: used, Concrete sample press for concrete and material testing Kedexb Nv Ujpfx Ahzjwt Flexural strength test Determination of compressive strength