Used Continuous Furnace for sale (5,216)

Year of construction: 2016, condition: new, heated length: 4000 mm Ijdpfjcdizfsx Adiea conveyor belt width: 900 mm temperature: max. 950 ° C

Year of construction: 2001, condition: used, machine/vehicle number: 12117, Continuous Furnace / Brazing Furnace Max. operating temperature: 1120°C Normal operating temperature: 1050°C Conveyor Belt: Useful width of conveyor belt: 250mm Useful height of conveyor belt: 150mm Heating Chamber: Heating Chamber Length: 1530mm Ijdpfjwku N Uex Adiea Heating Chamber Width: 500mm Height: 500mm Installed Power, Gas: 33kW Number of Heating Zones: 3 Number of Control Zones: 3 Voltage: 3 x 400/230V Frequency: 50Hz You are welcome to visit us by appointment.

Year of construction: 2020, condition: like new (used), functionality: fully functional, Fully automatic sintering continuous furnace system Manufacturer: Sarnes Model: 600-G/CQI-9 Year of manufacture: 2020 (commissioned 2021) Programmable, with online diagnostic system. Fuel: natural gas Iodpfjxfcdyex Adioa Hydrogen + nitrogen (N2+H2) operation integrated The system has seen very little use and is in excellent condition. Offer / Quotation Date: 18.1.19 620 mm belt width, gas heated, N2/H2 operation, LED dewaxing zone, rapid cooling section (Pos 2), flameless discharge and ceramic muffle, Heating: low NOx RS Rekudrall burners, SiSiC burner tubes, installed heating capacity 320 kW in 8 zones, dual thermocouples, 100 mm usable height. LED 3 dewaxing zones ("low energy dewaxing" – utilization of chemically bound energy of the waxes and improved burnout conditions especially for heavy PM parts (>0.9 kg)). Dimensions: - Infeed table 2 m (target-actual belt speed compensation) - LED3 dewaxing zone: 1.5 m - Sintering zone length 7.5 m - Rapid cooling length 1 m - Convective cooling zone length 2 x 4 m - Flameless discharge with air shower 2 m - Outfeed table 2.7 m - Total system length 23.7 m - Width 2.3 m Connection ratings: Heating: installed power 320 kW Natural gas: 25 m³/h (80 mbar) N2: 45-65 m³/h (max. 80 mbar) H2: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temp.

Year of construction: 2007, condition: repair required (used), functionality: not functional, Belt width: 650 mm, usable height: 220 mm, heated length: 3250 mm. The furnace has 3 heating zones and a heating capacity of 125 kW. The furnace has been stored in a hall for several years, and many components need to be sandblasted and repainted. In addition, the interior of the furnace needs to be relined, and some parts need to be newly manufactured. The furnace can also be completely overhauled by us to meet current technical standards. Iodpfxjxdants Adioa

Condition: good (used), Year of construction: 2012, LENZEN ATT 800C CONTINUOUS TEMPERING FURNACE 300kg/h Capacity Iedpfx Ajw Ecy Dsdioa

Condition: ready for operation (used), A long furnace Löcher with charging trolley operation is available. The furnace was part of a bending plant for the production of flange rings. Interior dimensions X/Y/Z: approx. 14000mm/500mm/1500mm, max. temperature: 1200°C, total furnace dimensions X/Y/Z: approx. 4100mm/3850mm/16000mm, control: CNC. The machine has a control defect. Documentation available. On-site inspection is possible. Isdpfxswkiipo Adisa

Condition: excellent (used), Mesh belt continuous furnace CIEFFE Isdpexpuahefx Adioa type: FNC procedure: tempering, carbonitriding, case hardening lenght: appr. 52 m belt (H x w x d): 25 X 930 X 9300 mm production output: 80-1000Kg/ h connected load: 170kW (HTO) + 35kW (wash) + 135kW (tempering) Heating capacity of natural gas: 768kW (annealing furnace) + 643kW (tempering furnace) annealing furnace: Belt speed: 20 -172 mm/min max. temperature: 910°C temperature uniformity: ± 7°C (area 1-3), ± 5°C (area 4-6) washing machine: wide conveyor belt: 1000 mm washing sink: 1800 lt rising tank: 1200 lt quantity per hourly production: 700dm3/h tempering furnace: belt speed: 60 - 234 mm/min max. temperature: 650°C temperature uniformity: ± 5°C (150-600°C)

Year of construction: 2019, condition: new, Electrically heated continuous furnace, make VEI-Engineering type: DLNTO-EB 830-500 heat treatment: tempering temperature max. 500°C working temperature: 220-450°C clear dimensions (w x h): 800 x 210 mm heated length: 4.950 mm heating power: 2 x 30 kW Isdpfjd Sg Hhex Adija fans: 2 x 5,5 kW Cooling water for 2 heat exchangers: inlet max. 2 bar PLC: Siemens S7

Year of construction: 2015, condition: used, external dimensions: lenght: 3900 mm Iedpfsclupdsx Adiea width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm mesh belt: 480 mm width clear height 140 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 electrical connected loads: three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7

Year of construction: 2012, condition: ready for operation (used), System type: - Pressing station with subsequent continuous furnace (curing) and sorting station - Year of manufacture: 2012 - Condition: Fully functional Process description: - Ceramic slabs are manually placed on a buffer belt - Transport of the slabs under the pressing station - Pressing under pressure and heat - Further transport of the slabs into the continuous furnace - Curing at constant temperature Iodpfxswbt N Uo Adisa Temperatures: - Pressing station: 120 °C - Continuous oven: 120 °C Oven length: 4m

Condition: like new (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, As new! Used for only 15 production days. Hot Air Furnace — Capacity: 2,000,000 kca This unit is in excellent condition, practically as new, with only 15 days of operation. Ideal for industrial heating or drying applications. Ijdpfx Ajxq Rv Ijdiea For more details or photos, please contact us.

Condition: new, Year of construction: 2025, functionality: fully functional, Your advantages at a glance Modular operating equipment system: Enables quick and clean handling of operating resources. Highest protection class IP55: Dust and splash-water protected, ideal for demanding production environments. Iodpfxewpr I Ej Adija Maintenance-friendly: Easy maintenance due to the modular print head and a single, long-lasting filter element. Intuitive operation: Large 10-inch touchscreen display for simple setup and handling. Printing of up to 5 lines with various fonts and flexibly controllable data sources. Efficiency and sustainability: Low solvent consumption and durable components sustainably lower operating costs. The continuous inkjets are particularly suitable for industries such as cosmetics, dietary supplements, food and beverage production, pet food, chemicals, as well as logistics and packaging. Thanks to the robust construction and flexible printing options, the devices can be individually adapted. Easy integration into your system.

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Isdpod Sm Diefx Adisa Max temperature: 700 C °

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. Iodjq Nyzbepfx Adisa 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: ready for operation (used), functionality: fully functional, pressing force: 400 t, stroke length: 150 mm, number of cylinders: 10, cylinder diameter: 120 mm, TECHNICAL DETAILS Maximum pressing dimensions: 1,500 x 4,400 mm Maximum stroke: 150 mm Pressing force: 400 t Number of cylinders: 10 Cylinder diameter: 120 mm Material of press plates: aluminium Plate thickness: 90 mm MACHINE DETAILS Iodpfxexw R N Io Adisa Electrical data Connected load: 7.5 kW Voltage: 380 V Type of heating: Oil Dimensions & Weight Dimensions (L x W x H): 13,000 x 2,400 x 2,400 mm Weight: 25,000 kg EQUIPMENT With infeed and outfeed conveyor Heating boiler included

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total width: 2,350 mm, total length: 6,000 mm, inner dimension length: 3,000 mm, inner dimension width: 1,600 mm, TECHNICAL DETAILS Oven dimensions: 3,000 x 1,600 mm MACHINE DETAILS External dimensions (L x W): 6,000 x 2,350 mm Firing: Gas Orientation: Vertical, for use with vacuum bags; connection to vacuum port inside oven EQUIPMENT 2 x trolleys included Iodpfexur Ndjx Adisa The following data is from a general offer; the seller accepts no liability for its accuracy. This also applies to the data sheet in the appendix. Electrical Voltage: 400 V Current: 16 A Frequency: 50 Hz Gas Type: Natural gas / Propane / LPG Connection: 1"1/4 Gas pressure: 20–60 mbar Propane/LPG consumption (4 burners): 8 kg Propane/LPG consumption (8 burners): 16 kg Natural gas consumption (4 burners): 9.6 m³ Natural gas consumption (8 burners): 19.2 m³ Temperature range (4 burners): 40–150 °C Temperature range (8 burners): 40–320 °C Power output (4 burners): 96 kW Power output (8 burners): 192 kW

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 700 mm, rotational speed (max.): 2,800 rpm, TECHNICAL DETAILS Minimum panel length: 170 mm Maximum panel length: 2,500 mm Minimum panel width: 50 mm Maximum panel width: 700 mm Drilling head positioning: NC Spindles for vertical drilling: 40 Spindles for horizontal drilling in "Y" direction: 6 Motor power: 3 kW Max. speed: 2,800 rpm Spindles for vertical drilling: 4+4 Motor power: 2.2 kW Max. speed: 2,780 rpm MACHINE DETAILS Number of injectors: 2 Number of storage tanks: 2 Iedpfoxw U Arox Adisa EQUIPMENT Control system: WINDOWS Wooden dowels Ø8 Note: Tools are not included in the offer.

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Iedpfxoh Uyg Ne Adisa

Condition: good (used), We offer you here a used pass-through frame of the manufacturer Bito to the purchase. Included in delivery are: 01x pass-through frame, used Manufacturer: Bito material color frame: similar cream white/ sendzimir galvanized material colour rollers: anthracite segment length: approx. 2.700 mm Segment depth: approx. 1,350 mm track spacing: approx. 175 mm Iodpsg Nt Uzofx Adioa roller width: approx. 25 mm pitch: approx. 26 mm Diameter of rollers: approx. 25 mm Material rollers: plastic Bars per continuous frame: 16 pcs.

Condition: used, Electrically heated tempering furnace with protective atmosphere Type: TSK-8-10-12-80 Temperature: max. 950°C Internal dimensions (W x H X D):800 x 1050 x 1200 mm Heating power: 80 kW Isdpfx Asxcphmjdisa Atmosphere fan: 4,0 kW

Condition: used, Nabertherm Nabertherm N 2260/S Chamber Furnace with Wire Heating up to 1300 °C Iedow Ec Egepfx Adisa Technical Specifications – Nabertherm N 2260/S Feature / Value Model: Nabertherm N 2260/S Maximum Temperature: 1300 °C Voltage / Connection: 400 V, 3~ (three-phase current), PE (protective earth) Heating Power: 75 kW Heating Zones: 5-sided (sides, floor, door, optionally ceiling) Internal Dimensions (Firing Chamber) Dimension / Value Width: 1,500 mm Depth: 1,000 mm Height: 1,720 mm Volume: approx. 2,580 liters External Dimensions (Complete Unit) Dimension / Value Length: 2,000 mm Width: 2,250 mm Height: 2,850 mm Weight: approx. 3,100 kg Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical data and information!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Annealing furnace Make Naber Ijdpforwfqnex Adija Type 41 S 12 kw YEAR OF MANUFACTURE 1972 Dimensions of the annealing chamber : width 350 mm height 220 mm depth 500 mm Transport dimensions : Length 1350 mm Width 850 mm Height 1560 mm with pallet Weight 320 kg

Condition: good (used), continuous welding machine, film welding machine Ijdpevyq Dujfx Adisa -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg

Year of construction: 2014, condition: excellent (used), functionality: fully functional, BVL Oberflächentechnik DAD 2BL (YUKON) Year of manufacture: 2014 For clean components in continuous operation Continuous-flow cleaning system made of stainless steel, equipped with an oil separator for uninterrupted material throughput. The workpieces are conveyed continuously—or in a clocked manner, if required—through successive treatment zones. Cleaning is performed as the parts pass through fixed nozzle systems. Suitable for parts with dimensions approx. 400 x 100 mm A wire link chain conveyor transports the components through the cleaning system, either lying flat or standing. • Surrounding nozzle frame – the offset nozzle arrangement enables thorough, all-round cleaning • Separation of treatment zones reduces cross-contamination • Nozzle frames and nozzles can be adapted to suit the parts • Usable dimensions, load capacities, and pump performance can be customized The process steps are carried out in successive treatment zones: • Spray cleaning with sequential wet-treatment zones (washing, degreasing, phosphating, rinsing, passivation) • Drying Tank volumes: Washing tank: 800 liters Rinsing tank: 500 liters Heating capacity: Washing tank: 48.0 kW Rinsing tank: 30.0 kW Pump, washing tank: 3.0 kW Pump, rinsing tank: 2.2 kW Washing pump pressure: 3 bar Rinsing pump pressure: 2 bar Drying fan: 2.2 kW Ijdpfjxcun Eox Adiea Drying heater: 18 kW Operating temperature: min. 45°C to max. 60°C Each machine comes with stainless steel drip pans for spill protection. These are included in the price and will be supplied with the machines. WE HAVE 2 IDENTICAL MACHINES AVAILABLE

Condition: excellent (used), Here we offer a Despatch lab oven. Despatch Laboratory Ovens + 8 "WAFER LCC: Maximum temperature 260 ° C Lockable circuit breakers turn on the control panel for easy maintenance Protocol 3 control with large LCD display, built-in data logging capabilities and USB port for easy oven setup and data export Edelstellenne room with interior seams welded continuously on the insulation side to protect the working space from pollution Programmable door locking prevents the operator from opening the oven door while the cycle is running The door lock switch turns off the heating when the door is open The rolled air flow consists of 100% HEPA (High Efficiency Particulate Air) and is filtered to ISO Class 5 (Class 100) throughout the process cycle The Magnehelic Manometer monitors the pressure drop of the HEPA filter so you know when to replace the filter Electric door unlocking for ergonomic operation UL & C-UL Listed Control Panel Open Modbus communication connection (RS485) for remote monitoring and recording Chamber measure L 350 mm Chamber measure B 350 mm Chamber Measure H 350 mm Maximum temperature 260°C Digital screen Yes Electric connection 230 V Total size L 830 mm Total dimensions B 910 mm Total Measure H 560 mm Type: LCC1-16NV-3 Ijdpfsd Nfq Iex Adija Condition: used/used Delivery: (See picture) (Changes and errors in technical D