Used Control Valve for sale (49,212)

Condition: excellent (used), Year of construction: 2017, Batch mixer, type WBX 1100 1 control unit for the mixer with frequency converter 1 cutter head, 5.5 kW 1 manual shut-off valve 1 separate control panel ("remote control")  maximum useful volume: 770 liters  mixing product: plastic granules  bulk density: ~0.7 - 0.8 kg/liter  product properties: free-flowing  mixing time: < 3 min. MACHINE DESCRIPTION Mixing drum  horizontal cylindrical mixing drum  end walls screwed to the drum Mixing system  mixing tools, such as ploughshares or inclined blades, screwed to blade arms in pockets Bearing  bearing of the shaft in flange bearing housings located outside the mixer, with roller bearings Sealing  shaft sealing by easily replaceable packing glands, packing glands cleaned by air Feeding  2 nozzles with flange, according to dimension sheet Ventilation  through 1 nozzle with flange, according to dimension sheet with filter bag incl. bracket and welded-in protective grid Discharge  via a dead-space-free closing flap, pneumatically operated  1 outlet nozzle with flange, according to dimension sheet Liquid feed option  none Inspection and cleaning  through 1 flap at the front of the drum, (1700 x 550) Flap closed by quick-release fastener  occupational safety and accident prevention by locking magnet and limit switch (not wired) Itodpfsza Ap Tsx Ah Dek Materials  mixing drum made of: stainless steel 1.4306  mixer shaft made of: stainless steel 1.4306  mixing tool made of: stainless steel 1.4306 Subject to prior sale Please send inquiries only by email Note: The machine is in storage and can be inspected on site. The buyer must arrange for shipping. This is not included in the quoted price.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: QP-25-AF, type of input current: three-phase, input voltage: 400 V, Qualipack QP-25-AF The fully automatic filling cycle begins by completely closing the bag valve and also registering the bag's weight. The next phase fills the bag, which is located on a load cell, with a rapid feed via a pneumatically operated slide gate and a screw conveyor. When the weight reaches a pre-set amount (typically around 95% of the required total), the slide gate closes to a slower feed rate until the required weight is reached, after which it closes completely. Once the screw conveyor has transferred all the product, it stops, and the valve seal is automatically released, ready for the bag to be removed. Itedpfxszgtv Aj Ah Djk - Conveyor belts for filled bags - Sealers for filled bags - Weighing capacity: 5-50 kg - Accuracy: Within 25g - Filling rate: Up to 4 tons per hour - Filling method: 2-stage via a screw conveyor - Valve grip: Pneumatic (fully closed) - Bag support: Height-adjustable gravity rollers - Product feed: Controlled by a pneumatic gate

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, Used for drying coated glass, furniture, and wood-like materials. Consists of: - Tunnel 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW - Tunnel 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW - Tunnel 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU - Roller conveyor CEFLA TR 3000 Heating medium - Electricity 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h (heating register 90 kW) 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 115 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Isdsw H Aw Sepfx Ah Dstk Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Installed electrical power: 115 kW Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Output electrical power: 1.5 kW; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h PR-Antifreeze for heating register no. 1, with sensor and automatic control of the shut-off valve. 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives is very efficient for achieving increased heat exchange due to the high air velocity. The ventilation unit consists of: - Fresh air and recirculation fan: 3 kW; Flow rate: 6000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6000 m³/h Digital adjustment of the ventilation via touchscreen. The air knives are installed transversely across the entire tunnel area. Air velocity at the air knife outlet max. 32.5 m/sec Overall length: 3000 mm Usable width: 1300 mm Overall width: 1783 mm Usable height of the passage: 80 mm Max. tunnel height: 1780 mm (excluding conveyor) Installed electrical power: 4.5 kW Machine control via LCD 5.7" touch TT 4000 slat conveyor with double chain, steel guides and chrome-plated slats: 4. Roller conveyor CEFLA TR 3000 Motorized with PVC-coated rollers Length: 3000 mm Photoelectric barrier for thin panels, thickness 4 mm (Changes and errors in technical data as well as prior sale are reserved)

Condition: good (used), Valve block, hydraulic control block for hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve -Control block: Hydraulic control block -Valves: 23 P1 M/10 D4 P4-S1/20H -Individual components: see photos -Shipping/Price: complete Itsdpfx Ahov U Rimo Dok -Dimensions: 270/270/H315 mm -Weight: 27 kg

Condition: good (used), Bosch Turbo Scara SR6 Swivel-Arm Robot The SR6/SR8 robot system consists of robust robot mechanics with four freely programmable axes. Thanks to its high speed and payload capacity (up to 8 kg), the robot is ideal for assembly work and fast pick-and-place movements. The turboscara SR6 and SR8 are swivel-arm robots (SCARA robots) with four axes and offer the following advantages: • Minimal cycle time with maximum precision • Large workspace and various strokes • Defined mechanical interfaces • PC control with diverse communication options • Complies with international standards • Brushless drive technology reduces repairs • Integrated user installation, optional: gripper for connecting a tool connector • Integration of safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS programming language is quick to learn and enables the creation of clear and understandable programs; New with BAPSplus: graphical user interface • Expandable via compact and flexible input/output modules: B~IO modules or decentralized CAN I/O modules • Expandable via the VTS02 valve block system with CAN connection for time-saving installation Technical specifications: Nominal load: 2 kg Maximum load: 8 kg Nominal moment of inertia: (axis 4) 500 kgcm² Maximum moment of inertia: (axis 4) 1000 kgcm² Horizontal force: continuous/max. 60/150 N Vertical force: continuous/max. 200/300 N Torque: (Axis 4) continuous/maximum 5/10 Nm Weight: 48.5 kg Ijdpfx Ahsiuzqtj Dotk Maximum speeds SR6 Axis 1+2: 5.9 m/s Axis 1: 350 °/s Axis 2: 480 °/s Axis 3: (∅20 mm) 1600 mm/s Axis 3: (∅25 mm) 1200 mm/s Axis 4: 1200 °/s Cycle time (cycle 25-300-25): < 450 ms Including controller Controller consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S Swivel range / Technical data see image Since this item is available multiple times and the robots have different Work tools these are only sample images and may vary. Item condition: Used (Subject to changes and errors in the technical data, information is subject to change!) In addition to approximately 50 paternosters, countless other machines such as presses, robots, ovens, industrial vacuum cleaners, etc. are available. A wealth of workshop equipment, workbenches, workshop trolleys, tools, forklifts, and shelving are available. A total of 24,000 m² of production space will be dismantled and sold. Please also note our other offers. The amount is due within 7 business days of purchase. You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2007, functionality: fully functional, Nordson Asymtek Axiom X-1020 fluid dispensing system: Positioning & Accuracy * Drive System: Linear encoded X-Y drive system with a closed-loop control circuit. * Accuracy: High precision up to ± 0.050 mm. * Sensors: Equipped with sealed glass linear encoders for accurate position measurement. [1, 2] Dispensing & Valve Options * Valve Compatibility: Suitable for advanced dispensing heads such as the DJ-9000 / DJ-9500 DispenseJet (for non-contact jetting) and the DP-3000 or DV-7000 Heli-flow pumps. [2, 3, 4] * Process Control: Patented Mass Flow Control (MFC) and Calibrated Process Jetting (CPJ™) modules for automatic weight measurement and fluid flow adjustment. [5, 6] * Applications: Optimal for flip-chip & CSP underfill, dam-and-fill, die-attach, and thermal paste applications. [2] Electrical & Pneumatic * Power Supply: 180–260 VAC (adaptive for 200–240 VAC), single-phase, 30A, 50/60 Hz. * Air Pressure: Requires a minimum of 6.2 bar (90 psi) stable compressed air supply. Itedszundkjpfx Ah Dek * Heating: Integrated substrate heating (pre-dispense, dispense, and post-dispense stations) for a stable thermal environment. [5, 6, 7] Dimensions & Weight * Machine Weight: Approximately 435 to 490 kg, depending on the exact internal configuration. * Certifications: Complies with international industry standards such as CE, SEMI-S2, SEMI-S8, and SMEMA. [5, 7]

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Iedpfx Ahjzu Aibs Dstk Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: good (used), Year of construction: 2015, CNC milling machine, milling and engraving machine, MECANUMERIC, MECA EASY 1510 – used: Price ex works: €23,500 (net)! Manufacturer: MECANUMERIC Type: MECA EASY 1510 Year of manufacture: 2015, former DEMO MACHINE Three-axis milling machine in a flat-bed gantry design. Working travels X, Y, Z axes: 1,050 / 1,550 / 200 mm. Table frame and gantry: Designed as a solid, stress-free, fully welded steel structure, powder-coated. Heavy table substructure for mounting the vacuum table VAC-CAISSON, designed as a cassette, with air passage holes in a 10 mm grid. Feed rate: Itedpfx Aszbybijh Djk 300 mm/sec (18 m/min) in rapid traverse and feed mode! Guidance on rails, slide shoes with upstream ball screw. Transmission: Precision ball screws Ball screw on all axes Maintenance-free, brushless servo drive motors (750 W on X and Y, 300 W on Z) Repeat accuracy: +/- 0.025 mm Mechanical resolution: 0.0006 mm Numerical control: Mecanumeric CN 7000 ISO-G-Code Machine operation via a 10" touch screen display Complete documentation and CE declaration of conformity in accordance with the basic safety and health requirements of Vacuum table 1,020 x 1,500 mm Support/work table designed as a closed aluminum plate, on which vacuum passage holes are arranged in a 10 mm grid. The table is divided into 2 main areas, which can be switched on manually. Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. Milling spindle HF40-ATC24 ENC Conversion Module APSG-A Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. High-frequency motor milling spindle 4KW Power: 4KW Speed range: up to 24,000 rpm. Fast tool change with pneumatic ejection, ISO30 taper. Tool holder: Clamping diameter up to 2-16 mm. Cooling with compressed air 6 bar 20 m/h Converters and switching elements are included in this position. Safety enclosure for the machine Front with door and safety lock - Position PROTCHOC omitted - Preparation of the electrical control and switching elements as well as the output socket for a high-performance industrial vacuum cleaner. Changer CH 6 S Condition: good Available: immediately Location: Delmenhorst

Condition: excellent (used), Year of construction: 2021, operating hours: 14,600 h, functionality: fully functional, machine/vehicle number: 248760, clamping force: 40,000 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,650 bar, injection weight: 1,030 g, mold height (min.): 450 mm, ejector force: 964,000 N, ejector stroke: 250 mm, opening stroke: 1,000 mm, plate length: 1,450 mm, plate width: 1,200 mm, plate height: 1,100 mm, installation height: 3,650 mm, total length: 7,740 mm, total width: 2,340 mm, total height: 2,300 mm, overall weight: 25,600 kg, heating capacity: 29 kW (39.43 HP), pressure: 200 bar, number of injections: 1, pump power: 56,000 W, power: 118 kW (160.44 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 213 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition, having been well-maintained. The machine comes with a Viper12 robot, which was originally supplied with it and can be seen in the accompanying photos. The robot’s control system is not integrated with the machine, so the robot can be removed and used separately, or another robot can be installed in its place. The machine has three air valves and two hydraulic valves, Euro map signals, and a signal for the dispensing unit’s rotation speed. The machine also has a strip guard, which is not included but can be arranged separately. The extruder’s heating elements are insulated with thermal insulation. Due to the guard, the machine can operate with the rear door open. It also has a water tank with 8 zones and two additional blocks with 8 outlets each. The machine has 8 zones for heating the tooling. Only PS material has been injection molded on this machine. Itodozqbk Nepfx Ah Dek

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total width: 1,700 mm, total height: 1,500 mm, total length: 3,050 mm, briquette diameter: 90 mm, overall weight: 5,800 kg, type of input current: three-phase, power: 80 kW (108.77 HP), year of last overhaul: 2014, Equipment: cooling unit, emergency stop, Complete, turnkey production line for wood briquettes based on the C.F. Nielsen BP 6000 mechanical briquetting press – a benchmark for high-density, round briquettes. The line covers the entire technological cycle and is offered as a single package with all auxiliary units. Process: raw material storage → metered screw feeder → high-pressure pressing → cooling line → automatic squaring saw → roller conveyor → two-stage Kallfass packaging (film wrapping + heat shrinking). Iedpfxsztq Hxe Ah Dotk Key data – C.F. Nielsen BP 6000 press: Round briquette Ø90 mm Output 1,200–1,800 kg/hour (depending on the material) Main motor 55 kW with soft starter Siemens PLC control Lubrication on bronze bearings Dimensions ~3,050 × 1,700 × 1,550 mm, weight ~5,800 kg Included: 2 flywheels, control cabinet, Grundfos oil cooler, Ø90 mm dies Scope of supply (complete line): C.F. Nielsen BP 6000 mechanical briquetting press Feed hopper (~1,300 × 1,300 × 1,200 mm) Mixing and transport screws Feeder with rotary valve + control cabinet OBL MB 75 PP metering pump (max. 420 l/hour) Cooling line – 10 × tube Ø90 × 3,000 mm, with supports Most MBC 100 P squaring saw (disc Ø350/30 mm, cut 100 × 100 mm) Roller conveyor (3,500 × 490 mm, 46 rollers) Kallfass Wrapmat 900 wrapping machine Kallfass 950 Uni heat shrinking tunnel (27 kW) with KORA PACKMAT friction feeder Condition: according to documentation, machines are fully refurbished and stored in original packaging, unused. Some units (cooling line, saw) are still in crates; the feeding section is shown installed. Offered as a single, complete line, sold “as is” – inspection is welcome. Ideal for manufacturers of wood/biomass fuel briquettes (sawdust, wood chips, wood shavings) who are looking for a proven European line at the price of a single used press. Price: €80,000 net (excluding VAT), entire line with all components. Delivery – self-collection, location on request. Photos and technical documentation – upon request.

Condition: used, System Overview A complete, cGMP-compliant Water for Injection (WFI) generation and storage system. Produces high-purity, endotoxin-free water for pharmaceutical and biotech applications via multiple-effect distillation. This item can be crated and shipped internationally. Please contact us for a quotation ----- Main Components - Finn-Aqua 200-S3 Distillation Unit – three-effect evaporator/condensers with falling-film design, pyrogen separation, and continuous blowdown. - 600 L WFI Storage Tank – 316L stainless steel, atmospheric vent filter, level and temperature sensors. - 600 L Jacketed Holding Tank – 316L stainless steel, insulated, steam/hot water jacket for temperature control. - WFI Distribution Pump – sanitary centrifugal pump for loop circulation. - Utility Connections – plant steam (3–8 bar), cooling water, feed water, condensate return, and instrument air. Itedpfxoxqq Dxj Ah Dok - Instrumentation – pressure, temperature, conductivity, and level transmitters with safety and relief valves. - Control Panel – PLC-based automatic operation, alarm handling, data logging, and local/remote control. ----- Key Features - Multi-effect distillation for high purity and energy efficiency. - Degassing and three-stage separation for endotoxin removal. - Fully stainless, drainable, and sanitary construction. - Compact, skid-mounted design with integrated utilities. - Designed for validation and GMP compliance (USP/EP WFI quality).

Condition: used, Year of construction: 2006, Masterfill Filling Machine S 500 The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products. Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards. The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill S 500 integrates seamlessly into existing production lines. Key Features - High-precision volumetric filling system - Suitable for liquid and semi-viscous products - Hygienic stainless-steel construction - Easy-to-use control interface - Adjustable filling speed and volume - Low maintenance and easy cleaning - Compact and space-efficient design Applications - Milk and dairy products - Yogurt and desserts - Cream and sauces - Beverage and liquid food products Materfill S500 6 head fill while rise filler M2-AF Serial number 4716 YOM 2006 Filling capacity 2ml to 2000 ml The filler is a 6 head automatic filler, with the capacity to store 50 separate preset menus, Brief FDS • Controlled by Siemens S7 PLC via Mitsubishi Beijer HMI Iodpfjywuczjx Ah Dstk • Jars feed in vis constant stainless steel slat band • Jars indexed via program-controlled infeed and outfeed pneumatic gates. • Jars filled via positive pressure within 50 ltr holding tank (this could be changed easily to a constant positive pressure into manifold via modulating pump) • Volume controlled via Nixon BNO turbine flow meters communications with siemens high speed counter. • Liquid feeds into jar with rise during fill or above jar for fill time • Full SIP, CIP, and flush capability programs available Dico CapperSerial number 3/379Brief FDS  Capper with rotating starwheel  Will cap Square of round Jar/ Bottles (change parts included)  Jar enters, signals PEC starwheel turns 90⁰ under capping head  Capping lowers on cam, retracts on cam  Jar/ bottle clamp activated of adjustable cam onto 5/2 valve  Starwheel turns 90⁰ onto exit conveyor  Current capping head removable, for 40mm cap (no alternative head)  All systems work on cams and relays, no PLC  Motor runs on DOL for capping (clutch adjusted and variable speed gearbox)  Cam motor uses inverter. Guards with interlocked access doorway Required services.  3 Phase 32-amp electrical supply  7 Bar air pressure Main control panel Cap sorter and feederRNASRC-N 400-2LSerial no 00801Brief FDS  40mm cap sorter and feeder  Vibrating bowl agitates caps upwards  Air jets and cut outs sort caps placing in correct orientation  Cap chute allows smooth passage to dispensing head with some adjustment  Cap dispenser works on bottle/jar passing under and catching cap, this allows the retaining jaws to open and release cap  Side or over independent speed controlled wheel assists in cap leveling Required services.  240V electrical supply  3 Bar air pressure Filling volume: 25-2000 ml Controls: SIEMENS S7 via Mitsubishi H...

Condition: excellent (used), Year of construction: 2007, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, injection pressure: 1,865 bar, injection weight: 192 g, mold height (min.): 200 mm, ejector stroke: 100 mm, Year of manufacture: 2007 Injection shot weight: 192g Injection unit 410 Screw diameter: 40 mm Specific injection pressure: 1865 bar Injection volume: 217 ccm Injection shot weight: 192 g Screw L/D ratio: 20 Mold closing unit 100 Mold plate dimensions: 600x600 mm Distance between columns: 420x420 mm Ijdpfx Ajzt I Rnjh Detk Ejector force: 35 kN Mold height: 200 mm Ejector stroke: 100 mm Weight: 5000 kg Control system: NC4 Tooling: - 2 x hydraulic core - pneumatic valve - Euromap 67 connector

Year of construction: 2026, condition: like new (used), functionality: fully functional, - inside diameter 900 mm and inside length 2500 mm - door with the locking system (manually) - fan inside the tank with the electrical engine outside - water cooled - 8 vacuum ports - electrical heating about 15 kw coils - Working pressure 10 bar - Adjustable AIR max. working temperature 180 °C - Equiped with related valve and pipes -With an inside trolley and outside cart -With 1 set of installation accessories -With automatic control system - PLC unit is Siemens Simatic S7 -With the installation air accessories Itodpfx Aezkwh Djh Dok - weight 1300 kg

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, center width: 1,600 mm, center height: 275 mm, spindle speed (max.): 3,500 rpm, bed width: 420 mm, controller model: Fagor  8055, TECHNICAL DETAILS Maximum turning height: 275 mm Distance between centers: 1,600 mm Turning diameter over bed: 550 mm Turning diameter over carriage: 310 mm Turning diameter over removable bed: 790 mm Bed width: 420 mm Spindle bore: 82 mm Spindle speed: 80–3,500 rpm Max. workpiece weight: 2,000 kg Ijdpszuwwtjfx Ah Djtk MACHINE DETAILS Control method: Teach-in Controller: Fagor 8055 Connected power: 15.5 kW Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,150 x 2,200 mm Shipping weight: 5,000 kg Shipping packages: 2 pcs. EQUIPMENT CE marking

Condition: good (used), Year of construction: 2012, Hydraulic pump, hydraulic power unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: Toyoki, hydraulic control block from CNC machining center Santenberg GTC S 2 -Control valves: HD3-2W-BcA-025AY-WYD2 / HD3-2WD-BcA-025A-WYD2 -Pressure reducing valve: HG3H-P-D3-025Y -Check Valve: HK3H-P-Q1-025Y Iodpfxoktm Dxo Ah Detk -Individual components: see photos -Submission/Price: complete -Dimensions: 300/135/H250 mm -Weight: 14.8 kg

Condition: new, Year of construction: 2022, functionality: fully functional, Manufacturer: Schneider Electric Model: EF593816 Type: Power Connector Block Configuration: 3-Pole (3P) Mounting Type: Front-connected, fixed installation Series: Ecofit Condition: New Isdpfxew I Twqo Ah Dstk Availability: In stock 16 pc Product Overview: The Schneider Electric EF593816 is a 3-pole Ecofit power connector designed for front-connected fixed breakers. This compact and robust unit is ideal for integration into low-voltage power distribution systems, particularly in industrial switchboards and control panels. Features: Compact 3-pole connector block Designed for fixed circuit breaker applications Front terminal access for easy installation Engineered for compatibility with Schneider Electric low-voltage breakers Suitable for panel building and retrofit projects Complies with industrial safety and quality standards

Condition: used, Year of construction: 2006, First registration: 11.04.2006 Fendt 307 CI Year of manufacture: 2006 Operating hours: 3,445 Engine: Deutz 4-cylinder turbocharger Displacement: 4,038 cm³ Rated power: 80 HP Max. torque: 423 Nm at 1500 rpm Tank capacity: 108 l Transmission: 40 km/h, 21/21 overdrive, shuttle transmission PTO: Powershiftable 540 / 750 / 1000 Hydraulics: tandem pump 70 l/min at 200 bar Rear lift capacity: 48.9 kN 2 double-acting spool valves, cross control lever Brakes: hydraulic brakes Cabin: air-suspended driver's seat, roof hatch, height and tilt-adjustable steering column, heater (no air conditioning) Front loader with parallel guidance, without third control circuit Sale subject to margin taxation in accordance with § 25a UStG Itjdpfsyv S Ulex Ah Djk Location: not specified

Year of construction: 1993, condition: excellent (used), functionality: fully functional, For sale: original Amafilter B.V. stainless steel pressure leaf filter with approx. 5 m² filtration area. Complete automatic filtration unit with PLC control cabinet, pneumatic valves, sensors, piping, fittings and support frame/platform. Main data: - Manufacturer: Amafilter B.V., Alkmaar, Holland - Type: vertical pressure leaf filter - Filtration area: approx. 5 m² - Filter vessel: stainless steel - Vessel volume: approx. 450 L - Max. working pressure: 6 bar - Max. working temperature: 150 °C - Year of filter vessel: 1993 - Automation: included - Control: PLC control cabinet - Valves: pneumatic valves - Includes sensors, piping, fittings, hoses and support frame/platform - Condition: used, fully functional according to seller information - Location: Serbia Suitable for filtration of vegetable oil, rapeseed oil, sunflower oil, soybean oil, technical oils, biodiesel and oleochemical applications. The filter can be used for crude oil clarification, post-degumming filtration, bleaching earth filtration and general liquid-solid separation in oil processing. The unit is sold as shown in the photos. Inspection possible. Loading possible. Zum Verkauf steht ein originaler Amafilter B.V. Edelstahl-Druckblattfilter mit ca. 5 m² Filterfläche. Komplette automatische Filteranlage mit PLC-Schaltschrank, pneumatischen Ventilen, Sensoren, Rohrleitungen, Armaturen und Tragrahmen/Plattform. Technische Daten: - Hersteller: Amafilter B.V., Alkmaar, Holland - Typ: vertikaler Druckblattfilter - Filterfläche: ca. 5 m² - Filterbehälter: Edelstahl - Behältervolumen: ca. 450 L - Max. Betriebsdruck: 6 bar Itjdpfjzfyafox Ah Dsk - Max. Betriebstemperatur: 150 °C - Baujahr Filterbehälter: 1993 - Automatisierung: inklusive - Steuerung: PLC-Schaltschrank - Ventile: pneumatische Ventile - Sensoren, Rohrleitungen, Armaturen, Schläuche und Tragrahmen/Plattform inklusive - Zustand: gebraucht, laut Verkäuferangabe voll funktionsfähig - Standort: Serbia Geeignet für Pflanzenöl, Rapsöl, Sonnenblumenöl, Sojaöl, technische Öle, Biodiesel und oleochemische Anwendungen. Einsetzbar für Rohölklärung, Filtration nach Entschleimung, Bleicherdefiltration und allgemeine Fest-Flüssig-Trennung in der Ölverarbeitung. Verkauf wie auf den Fotos. Besichtigung möglich.

Condition: good (used), Flow control valve Removed from an Arburg 420C 1000-350/150 - 2K PRICE REDUCED FROM 600 TO 500 EUR!!! Iodow Ru D Ropfx Ah Dstk

Condition: used, This listing is for the Spectrum Labs KrosFlow KR2i TFF System The unit is in full working condition and is ready for immediate release The KR2i TFF System is a versatile tangential flow filtration system, suitable for running volumes from 2 mL up to 10 L. It consists of a pump, tablet controller, scale, module stand, and real-time data collection software. The KR2i can mount up to two pump heads, allowing users to add an additional one if desired. Key Features of KR2i TFF System: Hollow fiber filter for 2 mL to 10 L / Flat sheet cassettes can process 12 mL to 15 L Itsdpfjxwc Eujx Ah Dek Auxiliary pump (900-1893): 600 RPM SAW-KR21 Scale: Capacity up to 20 kg with readability of 0.2 g Scale platform size: 18 x 18 cm Tablet control for ease of operation and real-time monitoring IP33-rated plastic enclosure is easy to clean Assortment of accessories included (see photos) The KR2i pump is designed to handle abrasive slurries, corrosive fluids, and highly viscous fluids with minimal wear. The system ensures that the fluid only comes into contact with the tubing and tube material, eliminating valves that could clog and making the inner surfaces easy to clean. With its compact footprint and versatility, the KR2i is an ideal choice for small-volume, R&D-scale microfiltration and ultrafiltration

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: BR-BTRS-100-250003, As-new Brinkmann Technology BTRS100 screw conveyor, year of manufacture 2025, equipped with control unit, flushing valves, adapter pieces, adjustable motor power, and Easy-Clean cleaning package. We have only tested the screw conveyor. Due to a change in technology, it has never been put into operation. Manufacturer: Brinkmann Technology GmbH Year: 2025 Type/Model: BTRS100 Designation: BTPS100 pipe screw conveyor Serial number: BR-BTRS-100-250003 Power: 1.5 kW Original price: €13,000 (net) Iodpoytql Nefx Ah Dotk Further documents (technical drawings, operating manual, invoice, etc.) available upon request. If you have any questions or require more information, feel free to send us a message or call us.

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 18019, Manufacturer: BOILER – Peder Halvorsen A/S Type: Boiler Factory Location: Flekkefjord, Norway Isdpozka Tpjfx Ah Dotk Power rating: 37.5 kW Voltage: 230 V Maximum pressure: 3 kp/cm² (approximately 2.94 bar or 300 kPa) Factory/Serial number: 18019 Year of manufacture: 1995 Large industrial steam-jacketed mixing kettle, commonly used in food processing facilities. Here are the features that stand out: Central stainless-steel kettle with a hinged lid, used for cooking or heating products. Two side support columns, which likely contain the drive mechanism and support the kettle for tilting. Control panel on the left with: Temperature controller/display. Start/stop buttons. Several control switches (possibly for mixing, heating, and tilting). Steam exhaust/vent stack above the left side, suggesting steam heating. Outlet/valve connection on the front-right of the kettle for draining finished product. This type of equipment is commonly used for: Soups Sauces Jams and preserves Fruit pulps Dairy products Confectionery (caramel, syrups) Large-scale cooking of vegetables or meats

Condition: used, functionality: fully functional, The 16-channel FT2M control system from MTS was in use until recently and is now for sale. All 16 system cables for 16 control channels—force, displacement, and servo valve—are included. PC and system software are included. Equipment: 16 pcs: Dual Valve Driver Board 497.26 16 pcs: AC Amplifier Board AC Cond 497.13B 16 pcs: Dual DC Amplifier Board 497.22C 4 pcs: 497.01 Analog Chassis (19" rack) 4 pcs: Power supply +-15V/+5V 4 pcs: Station Control Card 497.34 Itsdpfx Ahjwv Uqij Dek 4 pcs: RS232 Communication Card 497.36 1 pc: Hydraulic Control Panel 497.05 for 4 stations 1 pc: Global Resources III Card 498.71B 4 pcs: ADDA Card 498.65 2 pcs: PROC CPU 498.96-3

Condition: excellent (used), Bosch Turbo Scara SR6 Swivel-Arm Robot The SR6/SR8 robot system consists of robust robot mechanics with four freely programmable axes. Thanks to its high speed and payload capacity (up to 8 kg), the robot is ideal for assembly work and fast pick-and-place movements. The turboscara SR6 and SR8 are swivel-arm robots (SCARA robots) with four axes and offer the following advantages: • Minimal cycle time with maximum precision • Large workspace and various strokes • Defined mechanical interfaces • PC control with diverse communication options • Complies with international standards • Brushless drive technology reduces repairs • Integrated user installation, optional: gripper for connecting a tool connector • Integration of safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS programming language is quick to learn and enables the creation of clear and understandable programs; New with BAPSplus: graphical user interface • Expandable via compact and flexible input/output modules: B~IO modules or decentralized CAN I/O modules • Expandable via the VTS02 valve block system with CAN connection for time-saving installation Technical specifications: Nominal load: 2 kg Maximum load: 8 kg Nominal moment of inertia: (axis 4) 500 kgcm² Maximum moment of inertia: (axis 4) 1000 kgcm² Horizontal force: continuous/max. 60/150 N Vertical force: continuous/max. 200/300 N Torque: (Axis 4) continuous/maximum 5/10 Nm Weight: 48.5 kg Maximum speeds SR6 Axis 1+2: 5.9 m/s Axis 1: 350 °/s Axis 2: 480 °/s Axis 3: (∅20 mm) 1600 mm/s Axis 3: (∅25 mm) 1200 mm/s Axis 4: 1200 °/s Isdpfx Ashtrdcoh Detk Cycle time (cycle 25-300-25): < 450 ms Control system consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S You can find more items - new and used - in our shop! International shipping costs on request!