Used Condensate Valve for sale (7,208)

Condition: used, Little used 11.6 MW Condensing Steam Turbine Generator, TGM Kanis Turbinen GmbH, 2017 Reported to have less than 100 operating hours due to project cancellation. Includes turbine, synchronous generator, auxiliaries, and controls. Turbine Manufacturer: TGM Kanis Turbinen (Germany) Gtodpfoyhc Tusx Aadju Type: CT32-54 Condensing Steam Turbine Year: 2017 Live Steam Conditions: 43 bar @ 398 °C Exhaust Conditions: 0.064 bar @ 38 °C Power Output: Max continuous 11,615 kW Speed: 7,200 rpm Generator Manufacturer: Elin Motoren Type: HTM290E04, synchronous generator Rating: 14,631 kVA Voltage: 11,000 V Current: 768 A Frequency: 50 Hz Enclosure: IP54 Weight: 30,600 kg Year: 2017 Auxiliaries Voith Turbo I/P Converter Type: DSG-B07143 Supply voltage: +24 VDC Input pressure: 8 bar Output pressure: 2–5 bar Sirocco Cooling System Type: 2x16 KDL-E-50-2-1850-2-1.8 Motor power: 253 kW Air flow: 29,664 m³/h (65/35 °C, 2x0.065 kPa) Water flow: 2×25 m³/h (25/29 °C, 10 kPa) Pressure: 10–15 bar Controls Turbine control system included. Turbine was intended to be fed by boiler (not included in sale) with steam production capacity of 52570 kg/hour.

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. System described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Full documentation for equipment available. Gedpfx Ajyhc Ifjadotu

Condition: good (used), Solenoid valve, disc valve, flap valve, electromagnetic valve, solenoid valve, gas solenoid valve -Manufacturer: Kromschröder, gas solenoid valve -Type: MK 5 R3 B2891 -Pmax.: 130 mbar -Voltage: 220/240 V -Dimensions: 375/115/130 mm Gtedpfxjgh Dwve Aadou -Weight: 7 kg

Condition: used, Manufacturer : Gericke Model : 150 BS Type: Rotary valve for pneumatic transport Direct connection to pneumatic transport pipes Hopper with level sensor: 20 litres Gsdpfx Aaoykcamodetu Input/Output: DN1 : Ø60 mm DN2 : Ø75 mm Bearing: air purge

Condition: excellent (used), Rexroth Valve 4WRKE27W3-500L3X/6EG24 MNR: R900972662 MNR: R900619277 for Krauss Maffei The photos are sample images. Valve may differ from the photos. Gedpsyitg Iofx Aadstu

Condition: used, Air flow and discharge valves for storage tanks 50 - 150 cbm (ex-rated) - condition: used Gsdpfet Dw Nzex Aadstu - location: Bremen, Germany - remarks: Last used in a tank farm of liquor products; each valve was used for a 100 - 150.000 liter tank; ex-rated

Condition: good (used), Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, Valve manifold type MPAL-VI 569926 -Solenoid valves: Type 573718 / 533342 5 pieces -Individual components: see photos Gtedpfx Aasyhbp Uodsu -Price/Fee: complete -Dimensions: 150/140/H70 mm -Weight: 0.9 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 1,971 h, load capacity: 4,000 kg, lifting height: 4,100 mm, fuel type: electric, mast type: other, construction height: 2,800 mm, battery capacity: 930 Ah, remaining battery capacity: 88 %, battery voltage: 80 V, DGUV certified until: 02/2027, fork length: 1,800 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 Electric Forklift with the following specifications: Lifting capacity: 4,000 kg Lift height: 4,100 mm Overall height: 2,800 mm Year of manufacture: 2019 Operating hours: 1,971 STILL 4.0 ton electric forklift with full cab and heating, very few hours, excellent battery, good tyres (new at the rear), telescopic full free-lift mast, Meyer fork positioner with side shifter, mini-levers, two-pedal system, Blue Spot front and rear, lighting, fork length 1,800 mm, charger included. The following options/upgrades are available upon request (price on application): - Single-pedal system instead of two-pedal - Different fork length - Lighting according to German Road Traffic Regulations (StVZO) Gtjdsyhu Uwjpfx Aadeu Ex-works price, including 1,000-hour service as per STILL manufacturer guidelines and valid FEM (UVV) inspection upon sale. Viewing, demonstration, and test drive available by prior telephone appointment. Sale exclusively to business customers. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift cost-effectively with our own ramp low-loader (transport costs on request). Further information and offers can be found on our newly redesigned website.

Condition: good (used), Ultrafilter ultraaqua autoclean 0016 AC Donaldson Ultrafilter ultrafiltration system for compressed air compressor condensate Oil/water separator for compressed air condensate. ● Treatment plant for separating compressed air condensate and condensates with difficult separation properties (e.g. stable emulsions) by means of cross-flow filtration ● Physical separation principle guarantees residual oil content of < 5 mg/l in water Gtedpjidx Uisfx Aadou Intelligent control concept with programmable control for safe analog operation, incl. plain text display by means of text display, Fault monitoring via alarm messages with potential-free contacts and optional external network connection Optimized cleaning by comparison of input/output extends cleaning intervals and saves operating costs ● Thermally and chemically highly resistant ceramic membrane with long service life ● Antifreeze protection with integrated heating ● High-quality, corrosion-resistant materials for vessels, piping, pumps, seals, and valves Manufacturer: Donaldson Ultrafilter System type: ultraaqua autoclean 0016 AC Electrical data: 3 x 380 V, 50 Hz, 2.6 kW Compressed air: pmin: 5,5 bar, pmax: 8,5 bar, Pneurop 4 Water: pmax: 5 bar Membrane: pHmin: 1, pHmax: 11, tmin: 5°C, tmax: 70°C Financing through our bank is also possible. komplett-konzept.leasingo.de You can find additional filtration systems in other sizes—new and used—in our shop! International shipping costs upon request!

Condition: new, Moog Servovalve Unit D665-5703 & D661-5623C High-Performance Valve Module For sale is a fully functional, industrially used, high-performance servovalve unit from MOOG, consisting of two perfectly matched valves. Also available as individual components! Moog D661-5623C – High-Response Valve Technical Specification Value Model Designation D661-5623C Type Code G18H0A0NSA0HP Valve Type 4-Way, 2-Stage with Bushing Spool Nominal Flow 120–200 l/min (depending on version) Operating Pressure P, A, B Max. 350 bar Return Pressure T (internal) 210 bar Return Pressure T (external) 280 bar Control Pressure 25–350 bar Gedpfxoxltkke Aadstu Coil Stroke ±0.13 mm Control Area (AK) 1.35 cm² Operating Time (0–100%) Approx. 14 ms Hysteresis < 0.6% Zero Offset < 1% Supply Voltage ±15 V DC Input Signal ±10 V Protection Class IP65 Weight approx. 5.7 kg Connection diagram ISO 4401-05-05-0-94 Moog D665-5703 – High-Performance Valve Technical property Value Model designation D665-5703 Type code K15HXJW4NSM0-P Valve type 4-way, 3-stage, ServoJet Nominal flow rate 1500 l/min Δp = 5 bar per control edge Operating pressure P, A, B max. 350 bar Return pressure T (internal) max. 100 bar Return pressure T (external) max. 280 bar Control pressure min/max min. 25 bar above T / max. 350 bar Control spool stroke ±8 mm Control area (AK) 9.6 cm² Hysteresis < 0.2% Zero offset (55K ΔT) < 2% Zero leakage current (total) max. 11 l/min Supply voltage ±15 V DC Input signal ±10 V Protection class IP65 Weight approx. 73.5 kg Connection diagram ISO 4401-10-08-0-94 Connections X and Y external (ServoJet required) Description & Use: Condition: New (see pictures). Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs upon request!

Condition: new, ABEL molded membrane with valve rod for piston membrane high-pressure pump, filling pumps, chamber filter presses. NEW ! We are your ABEL pump supplier, service and spare parts partner for ABEL pumps. Pumps and spare parts available from stock or at short notice. Gsdeiyqilepfx Aadotu

Condition: new, ABEL valve seats for ABEL piston diaphragm high-pressure pumps. NEW ! Gtedpfx Aasiyqipodou We are your supplier for ABEL piston diaphragm high-pressure pumps, service and spare parts partner for ABEL pumps. Spare parts available from stock or at short notice.

Condition: new, ABEL valve ball on valve seat for ABEL piston diaphragm high pressure pumps. NEW ! Gjdeiyqizspfx Aadjtu We are your supplier for ABEL piston diaphragm high-pressure pumps, filling pumps, chamber filter presses, service and spare parts partners for ABEL pumps. Spare parts available from stock or at short notice.

Condition: new, ABEL degassing valve for ABEL piston diaphragm high pressure pumps. NEW ! Gtedpfx Aaoiyqi Nsdeu We are your supplier for ABEL piston diaphragm high pressure pumps and service and spare parts partner for ABEL pumps. Spare parts available from stock or at short notice.

Condition: new, ABEL valve ball for ABEL piston diaphragm high-pressure pumps. NEW ! Godpsiyqitjfx Aadjtu We are your supplier for used and new piston membrane high-pressure pumps / filling pumps for chamber filter presses, service and spare parts partner for ABEL pumps. Spare parts available from stock or at short notice.

Condition: new, ABEL degassing valve for ABEL piston diaphragm high pressure pumps. Gtodpoiyqi Eefx Aadsu NEW ! We are your supplier for ABEL piston diaphragm high pressure pumps and service and spare parts partner for ABEL pumps. Spare parts available from stock or at short notice.

Year of construction: 1993, condition: used, Used Injection Valve Putzmeister Gtodpfsbpi Insx Aadju Year of manufacturer: 1993 Nominal diameter: DN200 Nominal pressure: PN100 Manual: no Two machines are on stock.

Condition: used, Quantity available: 29 units Manufacturer: GEA Tuchenhagen Type : Butterfly valve Model T-smart 7 / 7881 TM1.P2AAL/81 Nominal diameter : DN 65 Setting air pressure : min 4,8 bar / max 8 bar Gedpfeygnb Ijx Aadotu Fluid pressure : 10 bar max Stainless steel : 316 L

Condition: new, Hydraulic cable winch HAW3000 with electric valve and radio remote control for wheel loader, excavator, crane, mini-excavator, tractor, tractor in viticulture, horticulture, building construction, civil engineering and many other applications. With the HAW3000 hydraulic winch you can make many applications easier. Maximum cable capacity at 3000 kg tractive force 40 m with 8 mm wire rope. Maximum rope capacity at 1700 kg tractive force 70 m with 6 mm wire rope. Maximum rope capacity with 3000 kg traction force 70 m with 6 mm plastic rope. Maximum rope capacity with 2000 kg traction force 100 m with 5 mm plastic rope. Maximum rope capacity with 1000 kg traction force 220 m with 4 mm plastic rope. Basic equipment 30 m 8 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture ⦁ In building construction, civil engineering and road construction ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and excavators ⦁ As a winch for tractors, working machines and grape harvesters A robust steel construction with 3-sided screw-on possibilities (left, right, rear) with M 12 threaded holes. This provides many possibilities for fastening the winch. Gtedpjfn Tu Tjfx Aadsu (Threads are cut and painted. They have to be re-cut before use because of the rust protection) Large lubricated pulley for long life of the steel cable. ⦁ Maximum working pressure: 240 bar peak ⦁ Oil flow rate up to 125 l/min short-term max.150 l/min ⦁ Maximum tractive force 3000 kg ⦁ Rope speed 100 m/min with oil quantity 1 [...]

Condition: new, HAW4000 hydraulic winch without valve for wheel loader, excavator, crane, mini excavator, tractor, tractor in viticulture, horticulture, civil engineering and many other applications. HAW4000 hydraulic attached winch can make many applications easier for you. Maximum rope capacity at 4000 kg pull 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg pulling force 90 m at 8 mm wire rope. Gsdsfn Tvijpfx Aadstu Maximum rope capacity at 1700 kg tractive force 150 m with 6 mm wire rope. Maximum rope capacity at 3500 kg tensile force 150 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg tractive force 220 m with 5 mm plastic rope. Basic equipment 50 m 10 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture. ⦁ In building construction, civil engineering and road construction. ⦁ Pulling out rootstocks and trees ⦁ As an attachment winch on backhoe cranes and excavators ⦁ As winch for tractors, work machines and grape harvesters A robust steel construction with 3-sided bolt-on option (left, right, rear) with M 16 threaded holes. This allows many possibilities for attaching the winch. (Threads are cut and painted. They must be recut before use due to rust protection). Large lubricatable pulley for long life of the steel cable. ⦁ Maximum working pressure: 210 bar peak. ⦁ Oil flow rate up to 200 l/min short time max.240 l/min. ⦁ Maximum tractive force 4000 kg. ⦁ Rope speed 140 m/min with oil quantity 200 l/min ⦁ Weight: 170 kg ⦁ Color red The winch can be installed in different positions. There is an optional hydraulic brake. Depending on what pulling speeds and pulling forces you need, we can gladly offer you different options. Contact us, we will be happy to advise you. Dimensions: ⦁ Length: 850 mm ⦁ Length with rope inlet 970 mm ⦁ Front width: 200 mm ⦁ Width rear: 300 mm ⦁ Width bearing: + 50 mm ⦁ Width motor: + 300 mm ⦁ Total width: 650 mm ⦁ Height: 420 mm

Condition: new, Hydraulic cable winch HAW1700 with electric valve incl.manual operation and radio remote control for mounting on wood splitter, crane, mini excavator, tractor, stacker, mower crawler and telescopic loader, in viticulture and horticulture, agriculture, construction and forestry and many other applications. With electric hydraulic valve and radio remote control. With the HAW1700 hydraulic winch you can make many tasks easier. Maximum cable capacity 30 m with 6 mm wire rope. Basic equipment 20 m 6 mm wire rope ⦁ Pulling firewood to the log splitter and setting it up ⦁ Pulling logs onto a trailer ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and small excavators ⦁ As a winch for small tractors and narrow-track tractors Godpfofn Tvhjx Aadetu A robust steel construction with screw-on options on both sides (bottom, back, top) with M 12 thread. This gives you the possibility to use the winch flexibly. Large rope pulley mounted on bearings on both sides for long service life of the wire rope. The standard pulling force is 1700 kg. The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on the pulling speed and pulling force you need, we can offer you different options. Please contact us, we will be pleased to advise you. ⦁ Maximum working pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation 380 Nm ⦁ Maxima [...]

Condition: new, Hydraulic winch for wood splitter, crane, mini excavator, tractor, tractor, viticulture, horticulture and many more applications. With hydraulic mounting winch you can simplify many applications: -Firewood to the wood splitter drag and set up -The logs move trailer -Remove rootstocks and trees -As growing winds at Rueckekraene and small excavators -As a winch for small tractors and narrow track tractors A robust steel construction with 3-sided bolt-on option (left, right, rear) 12 threaded holes, this provides many options to attach the winch (threads are cut and painted. You must cut before using with the taps because of the rust protection). It is a 20 m long and 6 mm strong steel cable mounted. Large pulley for long service life of the steel rope. We attach the hydraulic motors from 50 to 630 CC (default = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar top Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 nm peak Torque in continuous operation: 380 nm Godpfx Aajdf Ufdodetu Maximum tractive effort: 1700 kg Weight: 49 kg Line speed: 47 m / min for 60 L / min hydraulic oil Color: Red Dimensions: Length: 500 mm Pendant length: 570 mm Front width: 120 mm Rear width: 180 mm Wide storage: + 30 mm Wide engine: + 200 mm Height: 250 mm The winch is there to the

Condition: new, Hydraulic winch for wood splitter, crane, mini excavator, tractor, tractor, viticulture, horticulture and many more applications. With hydraulic winch mounted to help to many applications. -Firewood to the wood splitter drag and set up -The logs move trailer -Remove rootstocks and trees -As growing winds at Rueckekraene and small excavators -As a winch for small tractors and narrow track tractors A robust steel construction with 3-sided bolt-on option (left, right, rear) 12 threaded holes, this provides many options to attach the winch (threads are cut and painted. You must cut before using with the taps because of the rust protection). It is a 20 m long and 6 mm strong steel cable mounted. Large pulley for long service life of the steel rope. We attach the hydraulic motors from 50 to 630 CC (default = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar top Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 nm peak Torque in continuous operation: 380 nm Maximum tractive effort: 1700 kg Weight: 49 kg Godpfx Ajdf Ud Ssadotu Line speed: 47 m / min for 60 L / min hydraulic oil Color: Red Dimensions: Length: 500 mm Pendulum length: 570 mm Front width: 120 mm Rear width: 180 mm Wide storage: + 30 mm Wide engine:

Condition: new, Hydraulic cable winch HAW4000 with electric valve for wheel loader, excavator, crane, mini excavator, tractor, tractor in viticulture, horticulture, building construction, civil engineering and many other applications. With the HAW4000 hydraulic mounted cable winch you can make many applications easier. Maximum cable capacity at 4000 kg tractive force 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg tractive force 90 m with 8 mm wire rope. Maximum rope capacity at 1700 kg traction force 150 m with 6 mm wire rope. Maximum rope capacity with 3500 kg traction force 150 m with 6 mm plastic rope. Maximum rope capacity with 2000 kg traction force 220 m with 5 mm plastic rope. Basic equipment 50 m 10 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture ⦁ In building construction, civil engineering and road construction ⦁ Pulling out rootstocks and trees Gjdpfx Aefn Tvkoadstu ⦁ As winch for mounting on backhoe cranes and excavators ⦁ As a winch for tractors, working machines and grape harvesters A robust steel construction with 3-sided screw-on possibility (left, right, rear) with M 16 threaded holes. This provides many possibilities for fastening the winch. (Threads are cut and painted. They have to be re-cut before use because of the rust protection) Large lubricated pulley for long life of the steel cable. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow rate up to 200 l/min short-term max.240 l/min ⦁ Maximum tractive force 4000 kg ⦁ Rope speed 140 m/min with oil quantity 200 l/min ⦁ Weight: 170 kg ⦁ Color [...]

Condition: used, BOSCH proportional valve NG16, NG6- removed from K-Tec 350 3F - removed from running machine Gtjdst Sbfvspfx Aadsu - fully functionalmanufacturer: BOSCH  type: NG16, NG6 manufacturer no.:   spare part no.: 1type code: 4WRLE 16 X200M-3X/G24K0/A1WG02M-776 The number before the first slash describes the appliance series. For this reason, this digit of the type code on your old spare part may differ. If you have any questions, please do not hesitate to contact us. Dition: gebraucht