Used Conventional Lathe for sale (5,968)

Condition: used, Year of construction: 2007, centre distance 200 mm max. workpiece diameter 25 mm Travel path of front cross slide 70 mm Travel path of rear cross slide 60 mm Travel path main slide 100 mm spindle turning speed range 1.180/1.830/2.750 U/min Number of tool holders 5 pos. Cutting device shaft size 12 mm shaft 16 mm tailstock quill diameter 30 mm Lsdpfey Dh U Rox Amneaa tailstock quill stroke 90 mm Quill mount MK 2 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2009, greates pass round over bed 1050 mm dist. between centers 6000 mm centre height 520 mm turning length 4810 mm workpiece weight max. (main spindle) 6000 kg Lodpfx Amsygxy Uenoaa Maximum workpiece weight with steady rests 8000 kg max. torque on the spindle 12500 Nm number of spindle speeds 2,8-560 1/min feed per revolution 0,08-56 mm chuck diameter 630 mm Maximum travel distance of the longitudinal slide 4810 mm Maximum travel distance of the cross slide (suppor 530 mm Maximum travel distance of the tool slide (support 340 mm Tailstock quill diameter 150 mm total power requirement 31 kVA weight of the machine ca. 10500 kg dimensions of the machine ca. 7860 x 1970 x 1480 mm Equipment/accessories: -2 x face plates -3 jaw chucks -2 x steady rests -Multifix holder -Turning tools -Various tips -Technical documentation

Condition: new, functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 58 mm, turning diameter over bed slide: 430 mm, center height: 215 mm, turning length: 760 mm, quill stroke: 127 mm, quill diameter: 58 mm, total length: 1,885 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,680 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Tip height: 215 mm Center width: 760 mm Spindle bore: 58 mm Spindle nose according to DIN 55029 Camlock D6 Motor power: 7.5 kW Spindle speed range: 20-2000 mm Weight approx. 1680 kg Lajdpfx Aeu T E Ehjmnsa Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: new, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Tip height: 235 mm Center distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 7.5 kW Spindle speed range: 20-2000 mm Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates Ledju T Hiuepfx Amnoaa

Condition: new, functionality: fully functional, turning diameter over cross slide: 620 mm, spindle bore: 153 mm, turning diameter over bed slide: 860 mm, center height: 430 mm, turning length: 3,000 mm, quill stroke: 250 mm, quill diameter: 120 mm, total length: 5,250 mm, total width: 1,700 mm, spindle speed (max.): 680 rpm, spindle speed (min.): 8 rpm, bed width: 510 mm, overall weight: 6,800 kg, quill mount: MK 6, Center height: 430 mm Center distance: 3300 mm Spindle bore: 153 mm Spindle nose (DIN 55026) A2-11 Gear stages: 12 Spindle speed range: 8-680 rpm Drive power: 22 kW Laodpfxem E U Ufo Amnoa Weight approx. 6800 kg Features include Rapid traverse in X- and Z-axis Star-delta gearshift Fixed steady rest with rollers (max. clamping range 300 mm) Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Foot brake Manual central lubrication Complete coolant system with rear splash guard and splash guard on the slide Sliding chuck guard Switch rod with 4 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: new, functionality: fully functional, turning diameter over cross slide: 438 mm, spindle bore: 85 mm, turning diameter over bed slide: 660 mm, center height: 330 mm, turning length: 1,500 mm, quill stroke: 165 mm, quill diameter: 85 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 15 rpm, bed width: 400 mm, quill mount: MK 5, Equipment: rotational speed infinitely variable, Tip height: 330 mm Center distance: 1500 mm Spindle bore: 85 mm Spindle nose according to DIN 55029: Camlock D8 Gear stages: 12 Spindle speed range: 15-1500 rpm Drive power: 11 kW Weight approx. 2135 kg Features and more: Each gear stage is infinitely variable from 50% to 100% Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Lodpsm E Umijfx Amnjaa Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: new, functionality: fully functional, turning diameter over cross slide: 330 mm, spindle bore: 78 mm, turning diameter over bed slide: 520 mm, center height: 260 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,160 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,810 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Centre height: 260 mm Centre distance: 1000 mm Spindle bore: 78 mm Spindle nose according to DIN 55029 Camlock D8 Spindle speed range: 20-2000 rpm Drive power: 7.5 kW Features include: Hardened and precision-ground Z-axis guideways Lsdsh Rvxhopfx Amneaa Turcite coatings (on mating surfaces) for tool and cross slide Manual central lubrication with a pump for longitudinal and cross slide Complete coolant system with rear splash guard plate and splash guard on the slide Chuck guard Shifting rod with 3 adjustable cams Machine light Fixed centre Set of machine levelling plates

Condition: new, functionality: fully functional, turning diameter over cross slide: 330 mm, spindle bore: 78 mm, turning diameter over bed slide: 520 mm, center height: 260 mm, turning length: 1,500 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,670 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 2,135 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Center height: 260 mm Distance between centers: 1500 mm Spindle bore: 78 mm Spindle nose according to DIN 55029 Camlock D8 Spindle speed range: 20-2000 rpm Drive power: 7.5 kW Weight approx. 2135 kg Equipment includes: Rapid traverse on Z-axis Hardened and precision-ground Z-axis guideways Laedpectutmofx Amnsa Turcite coating (on counterpart) for the carriage and cross slide Manual central lubrication with a pump for the longitudinal and cross slide Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch bar with 3 adjustable cams Machine lamp Fixed center Set of machine mounting plates

Condition: new, functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 58 mm, turning diameter over bed slide: 430 mm, center height: 215 mm, turning length: 760 mm, quill stroke: 127 mm, quill diameter: 58 mm, total length: 1,885 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,680 kg, quill mount: MK 4, Tip height: 215 mm Center width: 760 mm Spindle bore: 58 mm Spindle nose according to DIN 55029 Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Weight approx. 1680 kg Equipment including Lodjcir Anjpfx Amnsaa Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: new, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Tip height: 235 mm Center distance: 1000 mm Lasdpfx Aocirniemnea Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Features include Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: used, Year of construction: 1960, spindle travel 3000 mm spindle stroke - max. 330 mm 2820 Laedpjyukh Tsfx Amnsa

Condition: new, turning diameter 760 mm turning length 3000 mm swing diameter over bed slide 520 mm centre height 380 mm reus 17 (7,5 - 1015) U/min tail stock MK6 quill stroke 225 mm diameter of quill 105 mm spindle bore 132 mm feed längs 0,039 - mm/min feed quer 0,02 - 9 mm/min total power requirement 15 kW weight of the machine ca. 4700 kg dimensions of the machine ca. 4900 x 1650 x 1650 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears Laedpfxeqv Iw Te Amnja *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE

Condition: used, Year of construction: 1989, turning diameter over bed 300 mm turning diameter over slide rest 150 mm turning length 800 mm Lajdpfxerdwfzj Amnsa spindle bore 36 mm turning speed range 42 - 2000 U/min feeds 0,011 - 0,91 mm/U tailstock quill taper MT 3 total power requirement 2,2 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,7 x 0,8 x 2,0 m Machine had been active in the school centre very little used!

Condition: new, Centre height: 260 mm Centre distance: 1000 mm Swing diameter over bed: 520 mm Swing diameter over cross slide: 265 mm Bed width: 320 mm Spindle bore: 62/110 mm Spindle mount: Camlock 6/8" Spindle speed range: 0 - 2000 rpm Spindle power: 10.7 kW Rapid traverse X/Z: 3 m/min Feed force X: 250 daN Lajdeyxb Dnjpfx Amnsa Feed force Z: 500 daN Dimensions (L x H x D): 2532 x 1506 x 1790 mm Weight: 2150 kg

Condition: ready for operation (used), turning length 800 mm turning diameter over bed 330 mm turning diameter over slide rest 170 mm turning speed range 24 - 1900 U/min spindle bore 38.0 mm centre height 165 mm total power requirement 3.5 kW weight of the machine ca. 850 kg. dimensions of the machine ca. 1850 x 800 x 1700 mm from a vocational school - in good condition (!!) Laedpfsxmaktox Amnoa particularly suitable for medium-precision turned parts - in checked conditions - machinenvideo - ?v=GDoJ0Z7Dckw Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 770” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - TRIPAN steel holder with 3x inserts - Sliding tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - EMERGENCY stop button - Operating instructions

Condition: ready for operation (used), Year of construction: 2017, turning length 4000 mm turning diameter 850 mm turning dia. in gap 1150 mm turning diameter over slide 520 mm turning speeds 5.0 - 630 U/min quill: 6 MK quill travel 250 mm spindle bore 100 mm workpiece weight max. 4000 kg bed width 600 mm travel -x axis 500 mm travel -z axis 3700 mm rapid traverse X 1800 mm/min rapid traverse Z 3640 mm/min feeds X : 0.04 - 4.8 mm/min feeds Z : 0.08 - 9.6 mm/min feeds Z1 : 0.02 - 2.4 mm/min engine output 20.0 kW weight of the machine ca. 6800 kg. dimensions 6150 x 1500 x 1500 mm good / well-maintained condition (!!) original price at the time approx. 65.000 euros special price on request Description: - particularly heavy, heavily ribbed and wide machine bed - in a rigid one-piece monoblock design - induction-hardened and ground guide prisms - guarantee long-term accuracy and minimal wear - solid headstock - with high-precision, tapered roller bearing main spindle . and 100 mm spindle bore - excellent smooth running at maximum spindle speed - joystick switch for X and Z feed directly on the support - manually switched 4-stage countershaft gear, - powerful main spindle motor enables exact adjustment of the speed . and high torque for heavy machining - rapid traverse for X and Z axes enables quick positioning of the support . and reduces idle times - adjustable overload clutch in the lock case protects the feed mechanism . against damage and failures - central, handy control for feeds and thread pitches - the feed gear offers a wide range of . diametric, inch, module and metric threads - support and top slide are designed for large cutting forces - higher working precision - user-friendly functions Scope of delivery: - SINO position indicator - TOS 3x jaw chuck .. Ø 400 mm - 4-jaw faceplate chuck Ø 800 mm - 4-way tool holder - Fixed steady rest 40-350 mm - Follow-on steady rest 30-120 mm - Fixed centering point - Reducing sleeves - Chuck protection - Coolant device - Machine leveling feet - Work light Lajdpfsxabh Tjx Amnoa - Operating tools - Operating instructions

Condition: ready for operation (used), Year of construction: 1983, turning length 1500 mm turning diameter 475 mm turning dia. over face-slide 290 mm turning dia. in gap 655 mm turning speed range 14.0 - 2000 U/min feeds - longitudinal 0.05 - 0.736 mm/min spindle passage 61.0 mm tail stock MK 4 quill stroke 200 mm diameter of quill Ø 70.0 mm spindle head DIN 55022 GR 6 bed width 330 mm voltage 380 V total power requirement 7.5 kW weight 2400 kg range L-W-H 3080 x 1160 x 1485 mm From a maintenance workshop (university hospital) in good condition (!!) With original documentation + machine card Features: - Robust electric motor-driven conventional lathe - KLOPFER 4-jaw chuck Ø 200 - MULTIFIX steel holder with 3x inserts - Movable steel holder guard - Adjustable bed stop - Movable tailstock incl. center point - Swiveling machine light - Machine swing feet Lodpoxfwc Rsfx Amneaa - Chip guard (movable from behind) - EMERGENCY stop button at the front - Original operating instructions + machine card

Condition: new, turning length 2000 mm turning diameter 560 mm turning diameter over slide 350 mm turning speeds 25.0 - 1500 U/min swing diameter over bed slide 350 mm turning dia. in gap 785 mm quill travel 180 mm quill: 5 MK spindle bore 105 mm spindle taper DIN 55029 D 1-8 engine output 7.5 kW weight of the machine ca. 2720 kg Ljdpfx Amsxabtpsnsaa range L-W-H 3340 x 1150 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Clamping disc 450 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - 2 centering points - Initial filling with Shell Tellus 46 - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Slip clutch - LED machine light - Change gears - Reduction sleeve - Chip back wall - Operating tool

Condition: new, turning length 1500 mm Lsdjxaam Ispfx Amneaa turning diameter 560 mm turning diameter over slide 350 mm turning speeds 25 - 1600 U/min swing diameter over bed slide 350 mm turning dia. in gap 785 mm quill travel 180 mm spindle bore 105,0 mm engine output 7,5 kW spindle taper DIN 55029 D 1-8 quill: 5 MK weight of the machine ca. 2.370 kg. range L-W-H 2.840 x 1.150 x 1.460 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Clamping disk 450 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - 2 centering points - Initial filling with Shell Tellus 46 - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Slip clutch - LED machine light - Change gears - Reduction sleeve - Chip back wall - Operating tool

Condition: excellent (used), Year of construction: 1980, turning diameter 300 mm turning length 1700 mm Lsdoytg Uyepfx Amnsaa swing diameter over bed slide 600 mm total power requirement 12,5 kW

Condition: used, Year of construction: 2024, controller manufacturer: Heidenhain, controller model: ND 7013, _____ Description: Year of manuf. : 2024 Control : Heidenhain ND 7013 Spindle bores : 71 mm Turning diam. : 345 mm Turning length : 1500 mm Technical data Center height :260 mm Swing diameter over bed :535 mm Swing diameter over facing slide :345 mm Center width :1.500 mm Spindle head :DIN 55027/DIN ISO 702-3 size 6 Ljdpfxoyu Ilij Amnoaa Spindle bore :71 mm Spindle diameter in front bearing :100 mm Drive power :7.5 kW Speed range :33 - 1,500 min-1 Metric thread :0.5 - 28 mm Quill diameter :65 mm Quill stroke :120 mm Internal taper :DIN 228 MK 4 Standard equipment :- Roller conveyor cover for leading and traction spindle :- Chip guard rear panel :- Chuck guard with limit switch monitoring :- Chip deflector :- Longitudinal stop with micrometer screw :- Change wheel door with limit switch monitoring :- Braking device for the main drive :- Starting clutch :- LED machine light in the chip guard rear panel :- Multi Suisse size B quick-change steel holder :- incl. 1 BD 25120 quick-change holder :- Coolant device incl. coolant pump 30 l/min. at 0.2 bar :- Tapered sleeve MK5 for the main spindle :- Fixed center point MK5 :- Central lubrication :- Tropical insulation up to max. 45° air temperature and max. 80% relative humidity :- Oil pusher press :- Set of operating keys :- Documentation Additional equipment :- Set of installation plates, 8 pieces :- Num. Position indicator mounted on : Support arm above headstock :- Packaging

Condition: used, Year of construction: 1989, centre distance 2000 mm 600 weight of the machine ca. 3,2 t Passage 49 mm Digital Lasdoyi Hvvspfx Amnoa Lynette

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine just arrived and will be cleaned soon. turning diameter over bed: 400mm distance between centers: 1000mm spindle size: 50 mm Ledpfxoyh Ndws Amnsaa chuck size 200mm speed range 40 rpm to 2000 rpm machine weight: 1700kg including 3 jaw chuck and tool holder

Condition: used, spindle bore: 150 mm, spindle mount: MK 6, Conventional Lathe Brand: ECHEA Model: DN 500 Serial no.: 4.075 Distance between centers: 6,000 mm Spindle bore: 150 mm Swing over bed: 1,000 mm Swing over gap: 1,300 mm Swing over cross slide: 980 mm Swing over compound rest: 780 mm Bed width: 670 mm Number of speeds: 24 (4–520) Morse taper in tailstock: 6 Hardened and ground bed. 400 mm gap in front of the chuck. Laedpfxeyu Hyxj Amnea Powered carriage. Includes 2 interchangeable carriages: - Tool post for conventional turning (tool post 280 x 280 mm, for tools up to 80 mm height) - Grinding attachment with 500 mm wheel and 10 HP motor – 1450 rpm Included: - TdG 3-jaw chuck 500 mm with outside jaws, inside jaws, and soft jaws - Grinding attachment for 500 mm wheel and 10 HP – 1450 rpm motor - Cable winder for powered carriage - Coolant tank with pump - 2 open steady rests with special non-seize pads, for approx. 250 mm diameters - 1 open conventional steady rest for approx. 200 mm diameter - 1 closed conventional steady rest for approx. 450 mm diameter - 23 grinding wheels for grinding attachment included, see photos.

Condition: as good as new (ex-display), The TDM S 430/1000 is a highly versatile Conventional Horizontal Lathe from KNUTH, designed to meet the demands of both single part and small batch productions in tool making and device construction. With an inverter that allows spindle speeds of up to 2,000 rpm and a user-friendly control panel, this lathe is ideal for training applications. Its robust construction features a one-piece heavy-duty cast-iron bed, ensuring increased rigidity and stability during operation. A modern 3-axis position indicator, adjustable longitudinal stops for automated feed shut-off, and a powerful coolant system further enhance its functionality. The TDM S 430 also includes an easy-to-read digital display for spindle speed, ergonomic selector levers for effortless control, and comprehensive standard equipment such as a 4-station tool holder and a robust LED work lamp. Experience precision and efficiency in your machining tasks with the TDM S 430/1000. Request a quote today to explore how this exemplary Conventional Horizontal Lathe can elevate your production capabilities. Laodpfx Amjuyg Dnonja