Used Coordinate Measuring for sale (6,522)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 500 mm, Zeiss CNC coordinate measuring machine Prismo MP5 Year of manufacture: 8/1999 Last calibration: 9/2023 Measuring range: X = 700 mm, Y = 900 mm, Z = 500 mm Features, Equipment: C98 control system with control panel RDS sensor system with RST 5-way probe change magazine RST 5x probe system Reference probe Probe accessories Calibration sphere Computer with monitor Calypso Basic 5.4 software Loading system Further accessories and options available Complete retrofit of the C99 and the current Calypso version possible Lajdpfxjufgbns Al Nec Available at short notice

Condition: excellent (used), The probe was used on a Zeiss Prismo Ultra as a replacement probe with few operating hours. Laedsy Epm Ijpfx Al Noc

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 400181806, Mitutoyo CV-3200H4 CONTOUR MEASURING CONTRACER; MFG: 2018, code no.: 218-482-10D, SN: 400181806, made in Japan. Expands measurement range while reducing workpiece interference. Mitutoyo’s newly designed detector arm lowers workpiece interference while expanding the measurement range in the Z1 axis (detector). Auto stop feature assures safety even during high-speed movement The detector includes a safety mechanism (auto stop upon collision) to assure measurement safety even during high-speed movement. If the arm is removed or shifts during measurement, the safety mechanism is triggered and stops the machine. Measuring range: X axis -100mm Measuring range: Z2 axis (column) travel range 3 - 60mm (±30mm in horizontal situation) Z2 axis (column) travel range: 3 - 500mm Detector (Z1 axis (detector unit)) Lasdpfx Aowz Sxnel Nsc Scale unit - Arc scale Resolution 0.04µm Stylus up/down motion: arc movement Measuring direction: both pulling and pushing directions Measuring face direction: downward or upward Measuring force: 30mN (by adjusting weight) Stylus traceable range: Ascent 77°; Stylus traceable range: Descent 83° (with one-sided cut stylus: standard accessory); Drive unit Scale unit: Separate type linear encoder Z2 axis (column) ABS encoder Resolution X axis 0.05µm Resolution Z2 axis (column)1µm Drive speed X axis 0 – 80mm/s and manual operation Drive speed Z2 axis (column) 0 – 30mm/s and manual operation Measuring speed X axis 0.02 – 20mm/s; Straightness (when the X axis is horizontal) X axis 0.8µm/100mm X axis inclination angle: X axis ±45° Accuracy (20°C) CV-3200 X axis ±(0.8 + 0.01L) µm L = Drive length (mm) Wide range: 1.8µm/100mm Narrow range: 1.05µm/25mm; Accuracy (20°C) CV-3200 X Z1 axis (column) ± (1.4 + | 2H | /100) µm H = Measurement height from the horizontal position; External dimensions (W×D×H): Main unit: 756×482 ×1166mm External dimensions (W×D×H): Controller: 221×344×490mm External dimensions (W×D×H): Remote box: 248×102×62.2mm Mass: Main unit: 150kg Mass: Controller: 14kg Mass: Remote box: 0.9kg Operating temperature range: 15 – 25°C (within ±1K temperature fluctuation on calibration and measurement) Operating humidity range: 20 – 80%RH (with no condensation) Rvcunpih32 Storage temperature range: −10 to 50°C Storage humidity range: 5 – 90%RH (with no condensation) Price: 12.700 Euro + VAT, negotiable, Ex Works Oradea, Romania. Please make an offer. Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale /

Condition: like new (used), Year of construction: 2013, operating hours: 400 h, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 20 kg, total height: 890 mm, total width: 986 mm, total length: 705 mm, overall weight: 170 kg, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, SPECIAL OFFER with optional full service (delivery, commissioning) Technical Specifications of the HEXAGON OPTIV CLASSIC 321 GL tp Measuring Machine Year of manufacture: 2013 Maximum traverse speed in X, Y, Z axes: 160 mm/s Maximum workpiece weight: 20 kg Measurement resolution: 0.05 µm Measurement accuracy in X, Y axes (optical sensor): Ex, Ey = (1.6 + L/250) µm Measurement accuracy in XY axes (optical sensor): Exy = (2.0 + L/250) µm Measurement accuracy in Z axis (optical sensor): Exy = (3.9 + L/200) µm Measurement accuracy in X, Y axes (touch-trigger probe): Ex, Ey = (2.0 + L/250) µm Measurement accuracy in XY axes (touch-trigger probe): Exy = (2.5 + L/250) µm Measurement accuracy in Z axis (touch-trigger probe): Ez = (2.9 + L/200) µm Measuring volume Optical Sensor: X 300mm Y 200mm Z 150mm Measuring volume tactile sensor: X 230mm Y 200mm Z 150mm Dimensions (L x W x H): 705 x 986 x 890 mm Machine weight: 170 kg Measuring machine features: 3-axis microprocessor CNC with vector path control Metrology software: PC-DMIS Vision Vision sensor for non-contact measurement of the smallest and most precise components CCD camera with 6.5x motorized CNC zoom DC servo motors TESA touch probe system (1 body and 1 module) Laedpfxsxmgvpo Al Njc Modular probe changer: TESASTAR with 4 slots and 4 modules Linear guides on all axes Coaxial LED incident light (white LED) LED backlight (green LED + diffuser) Multi-segment LED ring light Including evaluation computer by Dell Optional services: Delivery (extra charge) Commissioning (extra charge)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, measuring range X-axis: 4,000 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 2,100 mm, Hexagon Mercury DCC C1 Mfg date: 4/2014 Model: 40.16.21 Working area: 4000x1600x2100 mm Ljdpoxy Iz Hefx Al Noac System: B3CLC Head: TesaStar-m Sensor: TP20 Safely dismantled and prepared for transport directly by Hexagon Metrology.

Condition: excellent (used), Year of construction: 2021, Renishaw Type: Equator 500 Year of manufacture: 2021 Item description: For sale is a Renishaw Equator™ 500, a high-precision industrial 3D measuring and inspection system designed for series production and process control on the shop floor. The Equator 500 is not a traditional coordinate measuring machine (CMM), but a comparative measurement system developed specifically for fast, repeatable measurements directly in the production environment. It is ideal for mass production, in-process measurements, and automated inspection routines. The unit is perfectly suited for checking dimensional accuracy, geometric tolerances, and position tolerances of workpieces, and can provide feedback to CNC machines. The software loads correctly, system status as per display: "Started OK" (see photos). Features & Application Areas: - 3D measurement of workpieces - Comparative measurement principle (very fast inspection cycles) - High repeatability in the micrometer range - Real-time temperature compensation - Suitable for shopfloor use - Automation ready (e.g. robot loading) - Ideal for series production, spot-checks, and process control Typical Industries: - CNC manufacturing - Metalworking - Automotive / supplier industry - Mechanical and tool engineering Technical Data (manufacturer information / approximate values) Manufacturer: Renishaw Model: Equator™ 500 (H+150) Device type: Comparative 3D measuring system / CMM Measuring range: Ledpoybbqxsfx Al Njac X / Y: approx. Ø 500 mm Z: approx. 150 mm Measurement principle: Comparative coordinate measurement technology Temperature-compensated measurement Accuracy: Very high repeat accuracy Measurement accuracy in the micrometer range (depending on application and strategy) Control & Software Controller type: Equator 500 Software version: 2.5.21.1 RRTLOS version: 5.1.12 Operation via PC-based Renishaw software Electrical Data: Supply voltage: 230 V AC Frequency: 50 / 60 Hz Power requirement: approx. 1 kW Dimensions (approx.) Total height: approx. 1,900 mm Footprint / diameter: approx. 1,200 mm Weight (approx.): 130 kg Condition: used Scope of delivery: (see photos) - Renishaw Equator™ 500 measuring system - Controller / industrial PC - Monitor - Keyboard and mouse - Base frame - Accessories as shown in the photos (Subject to technical modifications and errors. All data provided without liability!) For further questions, we are happy to assist you over the phone.

Condition: used, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, Equipment: type plate available, Mitutoyo coordinate measuring machine type Crysta Apex C776 Temperature compensation on all axes Measuring range X-axis = 700 mm Measuring range Y-axis = 700 mm Ledpewhfh Asfx Al Noac Measuring range Z-axis = 600 mm Measurement uncertainty = 1.9 + 3L/1000 (µm) Renishaw probe head PH10MQ Renishaw change rack SCR200 Renishaw sensor TP200 Renishaw TP200 modules = 6 pcs Measuring software MCosmos PC system WIN10, 27" monitor Reference sphere / calibration sphere Software upgrade optional Hardware upgrade optional Full service upon request

Condition: used, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Equipment: type plate available, Mitutoyo Crysta Apex C7106 coordinate measuring machine Temperature compensation on all axes Active vibration isolation system from BILZ X-axis measuring range = 700 mm Y-axis measuring range = 1000 mm Z-axis measuring range = 600 mm Measurement uncertainty = 1.9 + 3L/1000 (µm) Renishaw PH10MQ probe head Renishaw SCR200 interchangeable rack Renishaw TP200 sensor Renishaw TP200 modules = 6 units MCosmos measuring software WIN10 PC system, 27" monitor Reference sphere / calibration sphere Optional software upgrade Optional hardware upgrade Full service available upon request Lasdowhb A Nspfx Al Njc

Condition: good (used), Year of construction: 2007, 2nd unit MORA-GEMODEK Type: MICROSPEED 10 Year 2007 Measuring machine control cabinet with remote control. Lodpfx Ajr Igwnol Neac

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° Ljdpfxew Title Al Neac The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and resolution Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.

Condition: used, Werth Type: Werth SCOPE- CHECK 400 3D coordinate measuring machine Technical data: Measuring capacity (X x Y x Z) : 400 x 200 x 200 [mm] Work table with integrated electrical cabinet : 1600 x 950 x 780 [mm] Max. Weight on table : 20 [kg] Operating conditions, * relative humidity, 40 - 70 [%] * Temperature; 10 - 40 [°C] Measuring precision (20°C, 8 kg, magnification 5X, resolution 0.5 micron) On table, E1 = 1.8 + L/120; E2 = 2.0 + L/150 All positions, E1 = 2.5 + L/120; E2 = 2.9 + L/100; E3 = 4.5 + L/75 Incremental dimensions Ball screw drive with servo motor Optical magnification (video) : 0.5X to 5X Optical field (video) : 13 x 10 [mm] to 1.3 x 1 [mm] Movement on linear guide with ball Combinable illumination : diascopic, episcopic ring LED/axial Voltage: 230 [V] Frequency: 50 [Hz] Power: 2 [kW] Weight: 300 [kg] Accessories CN Lighting Control via software Video sensor IP for detection of measuring contour (screen display) Electronic control for table movement Manual control for table by joystick Lodpfou Iub Rjx Al Noac Predisposition for mechanical probe Calibration, 3D measurement, probe communication software Scope of delivery: (Werth coordinate measuring machine with accessories as shown) Condition: used (Changes and errors in the technical data, specifications are reserved!) Please ask about transportation options before purchasing. We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2020, Keyence KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Professional handheld measurement system for precise 3D measurements directly in production environments. Item description: For sale is a used KEYENCE XM-2000 coordinate measuring system including the XM-H1000 handheld probe. This innovative system enables precise 3D measurements directly at the workplace – without a dedicated measuring room, complex setup, or special CMM expertise. The device is ideally suited for manufacturing operations, quality assurance, initial sample inspection reports (ISIR/PPAP), in-process controls, as well as for reverse engineering. Technical Data – KEYENCE XM-C1000 / XM-H1000 (XM Series) Measuring System (General) Specification: Measurement range (XYZ): approx. 600 × 300 × 200 mm (depending on setup) Measurement accuracy: ±(8 + L/80) µm (L = measured length in mm) Repeatability: ±3 µm (typical) Resolution: 1 µm Measuring principle: Optical tracking with camera-based detection Calibration: User calibration with calibration sphere possible CAD Comparison: Directly on the device (STEP, IGES, etc.) Export formats: PDF, Excel, CSV, DXF Tolerance analysis: Automatic with color mapping XM-C1000 – Control and Evaluation Unit (Controller) Component: Display: 15” touchscreen Connections: USB, LAN, HDMI, power Storage options: Internal + USB export Software functions: Measurement, CAD comparison, report generation Operation: Touchscreen + pushbutton operation Languages: Multilingual (including German) XM-H1000 – Handheld Probe Specification: Probe type: Handheld with pressure button Feedback: LED status indicator, vibration signal Probe tip: Interchangeable, various tips available Tracking: Detected via controller’s camera system System Characteristics Laedpfewxvmdox Al Nsc Specification: Operating temperature: 10 – 35 °C Power supply: 100–240 V AC, 50/60 Hz System dimensions (complete): approx. 800 × 600 × 800 mm (depending on setup) Total system weight: approx. 25–40 kg (depending on configuration) Mounting: On table or optional measuring table Scope of delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld probe XM-C1000 (Controller) Camera unit / tracking module Connection cables and power supplies Condition: Used, fully functional, in very good condition. Shipping & Delivery: Shipping via freight forwarding Collection by appointment possible. International shipping available on request. If you have any questions, need further information or wish to arrange a viewing appointment, please feel free to contact us. (Subject to changes and errors in the technical data and information!) We are also happy to answer any further questions by phone.

Condition: used, For sale is a high-quality 3D CNC coordinate measuring machine from the renowned manufacturer Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. This device stands out for its precision, reliability, and versatility in industrial metrology. Features & Equipment: - CNC-controlled 3D coordinate measuring machine - Multi-sensor capable (optical and tactile measurements possible) - Moving-bridge design (MB/Z) for high stability and flexibility - High precision measurement of complex workpieces - Robust construction, designed for continuous industrial use Lodpfx Aloxcwxge Neac - Suitable for quality control, production monitoring, and R&D applications Additional Equipment – Renishaw TP200 Probe System: The high-precision, touch-trigger Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It allows for quick probe change-outs and precise measurements even with long probe styli. Key Features: - Strain gauge technology: Minimizes deflections are registered with high accuracy; typical errors such as “lobing” are avoided - High precision: Repeatability up to 0.4 μm, 2D probing uncertainty ±0.8 μm - Fast changeover: Automatic probe change with SCR200 rack, no recalibration required - Durability: Probe module lifetime exceeds 10 million triggerings - Flexibility: Standard- (SF) and low-force (LF) modules for sensitive materials - Compatibility: Usable with Renishaw PH10 probe heads and extensions up to 300 mm Technical Specifications (excerpt): - Connection: M8 connector, PI200 interface - Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) - Probing force XY: 0.02 N, Z: 0.07 N - Overtravel force XY: up to 0.4 N, Z: up to 4.9 N - Weight (sensor + module): 22 g - Stylus threads: M2 Technical Data: - Manufacturer: Werth Messtechnik - Model: Scope-Check 650×750×500/MB/Z - Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm - Supply voltage: 115–230 V AC - Power consumption: max. 10 A Scope of Supply: - Werth Scope-Check 650×750×500/MB/Z - Renishaw TP200 probe system including probe modules - Accessories as shown in the attached images Important note: "The table shown in the photos is not included in the sale." (Specifications and technical details subject to change and errors!) We are happy to answer further questions by phone.

Condition: good (used), Hexagon Type: Hexagon Optiv Performance 442 Product description: The Optiv Performance 442 3D multisensor coordinate measuring machine combines optical and tactile measurements in one system. The system supports multi-sensor measurements with vision sensor, tactile sensor, TTL laser (Through-The-Lens) and the innovative chromatic white light sensor (cws). The basic device with vision sensor can be modularly expanded with all available sensors. Areas of application: ٠ Use on level ground ٠ Versatile geometry measurements and GD&T analyses with standard accuracy Construction ٠ Design principle: " Low-vibration granite construction with fixed bridge and movable table " Integrated substructure with optional vibration dampers ٠ Guides: " Precise mechanical linear guides in all axes ٠ Drives: " DC servomotors, power transmission via backlash-free ball screws in the center of gravity ٠ Length measuring system; " Incremental length measuring system ٠ Resolution; 0.1 pm Hexagon Optiv 442 multi-sensor measuring device equipped with camera, laser and Renishaw touch probe. - Measuring range single sensor: 410x410x200mm - Dimensions: 1232x910x1663mm - Weight: approx. 940kg - max. load weight: glass plate 30kg - Accuracies: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L= measuring length in mm) - Max. travel speed per axis: 200mm/s - Camera with 2-stage zoom - laser - LED ring light - Renishaw 6-fold probe changer - Renishaw TP200 touch probe - Monitor operation - Windows 7 Ultimate evaluation station - Measuring machine HEXAGON Optiv 442 Electrical connection values: Voltage 115/230 V ± 10% Mains frequency 50/60 Hz ± 5 % Power consumption 1000 VA Weight: approx. 1100 kg Condition: second-hand / used Lajdpfx Aeu Szpmol Noc Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Projector make: Baty Model: SM 20 E 220 volts Laodpjxlzxiefx Al Nec 3 objectives: 10x, 20x, and 50x magnification Coordinate stage with Werth Digimy ZV 5 Digital readout, 2 axes Glass disc diameter: 510 mm Transport dimensions: Length: 1000 mm Width: 600 mm

Condition: used, functionality: unexamined, measuring range X-axis: 1,970 mm, measuring range Y-axis: 1,470 mm, measuring range Z-axis: 1,220 mm, CNC portal measuring machine LK, model G 80 Granite worktable dimensions: 3490 x 2080 x 500 mm Travel in X-axis: 1970 mm Travel in Y-axis: 1470 mm Travel in Z-axis: 1220 mm Year of manufacture: 1987, put into operation: 1991 Includes Renishaw measuring system Special export price: €4,500 Laodpfx Aegbdy Rsl Nsc

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm MITUTOYO Euro-M 544 Coordinate measuring machine Measuring machine Size of the base plate: 850x850mm Information on the scope of delivery The package contains only the ordered product. Additional decorative items or other Lodstycucepfx Al Njac items shown in the product images are not part of the delivery.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, repeat accuracy: 0.09 mm, Metris, Nikon Lc60dx scanner for use on a 3D measuring machine. This scanner is supplied including OPCD and installation on an existing measuring machine (connectivity is a prerequisite). Compatible with Wenzel, Pantec, Mitutoyo. Other brands need verification. Very little used scanner that still works perfectly on a 3D measuring machine. Optionally, we can add an ACR3 change rack so the scanner can be automatically exchanged on the measuring machine. Ledewx R Nyjpfx Al Njac

Condition: like new (used), Year of construction: 2014, functionality: fully functional, repeat accuracy: 0.002 mm, If you want to achieve faster measurement speeds with your existing measuring machine, adding a 3D laser scanner is certainly worthwhile. With the filter techniques implemented in the LC15DX scanner, you can scan shiny parts and automatically scan components with extremely high precision. In short, it is a very fast and easy way to gain insight into existing products that previously would have required hours of measuring machine time. Lsdpowx R N Tsfx Al Neac The scanner is supplied with an OPCD and installed on the measuring machine, depending on the machine’s location. We can also offer an ACR3 changing system, which we have available; however, this is not included in the price.

Condition: as good as new (ex-display), Year of construction: 2014, functionality: fully functional, machine/vehicle number: RA-7535, measuring range X-axis: 1,750 mm, measuring range Y-axis: 1,750 mm, repeat accuracy: 0.04 mm, Very neat measuring arm from the brand Romer Hexagon. With a measuring range of 3500mm and an accuracy of < 0.04mm, this measuring arm in combination with PolyWorks software is a very user-friendly system that allows you to perform accurate measurements for years to come. A HP-L-8.9 3D scanner has been added to the 6-axis measuring arm, making it a complete measurement system. The PolyWorks Inspector software, including scanning, version 2019, is included. Ljdpfx Aou Hqfpel Nsac

Condition: used, functionality: unexamined, input voltage: 220 V, Used Leitz Wetzlar Measuring microscope setup (UWM) with external XY readout and power supply for lighting. Manufacturer: Ernst Leitz GMBH Wetzlar Lodpfx Aowm Hqcsl Noac Movement possibility on X and Y axis, and adjustable in height. Camera can be added on top for making recordings. Digital readout X and Y axis by means of Sony Magnescale LH31A-2

Condition: used, functionality: unexamined, machine/vehicle number: Euro-C-A574, Used Mitutoyo Euro-C-A574 measuring table, 3-axis, in unknown functional condition (for parts or repair) Manufacturer: Mitutoyo Model: EURO-APEX574 | CMMC-F | TEMPIF-UC2 (& RENISHAW pi200-3) Lsdpfxjw Hqrwe Al Noac With red securing material for transport (see photo) Measuring range: 500 x 700 x 400 mm Weight: ~450 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, Equipment: type plate available, Including control panel, control PC, and software as shown in the pictures. EXW – self-collection on site. The purchasing company must sign a sales contract and disclose/confirm its beneficial owners. Furthermore, the signatory must complete a Postident identification. Lsdpfjyam S Sox Al Noac

Condition: good (used), Year of construction: 2008, Hydraulically Height-Adjustable Pallet Truck from Witte - Alufix for loading coordinate measuring machines With Hovercraft Air Bearing Plate Pallet truck with hydraulic height adjustment from approx. 660 mm to 950 mm. Table top coated with a roller on the broad side for bridging height differences between the table and measuring plate. Internal dimensions approx. 900 x 700 mm. Eurofix air bearing plate with handle and integrated air valve for easy movement and positioning of heavy workpieces on coordinate measuring machines. The surface is equipped with 50 mm grid pattern boreholes. The holes have a diameter of 12.5 mm, a depth of 7 mm, and M6 threaded inserts at the base. The air supply can be activated via the valve integrated in the handle, allowing the entire plate with the mounted measuring object to be moved very easily. Usable area (aluminum) is approx. 600 x 600 mm. Ideal for Witte Alufix clamping systems for fixture construction in the automotive sector, etc. Dimensions approx. 1000 x 800 x 660/950 mm (LxWxH). Weight approx. 100 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse. See "more offers from this supplier." Lodpfxew Nylke Al Njac

Condition: used, functionality: fully functional, In this offer you purchase a used mobile coordinate measuring system ‘Keyence WM-3500’ Object of sale: 1 x Keyence WM-3500 with the following equipment: incl. camera tripod incl. laptop with measuring software incl. WM-B1 measurement battery incl. battery charger WM-BC1 incl. transport case Condition: Laedpfxjv Id Uvo Al Nsc This is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function For further information you can of course contact us personally.