Used Coordinate for sale (762)

Condition: not inspected (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 400 mm, table width: 730 mm, table length: 1,170 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS X-axis travel: 500 mm Y-axis travel: 650 mm Z-axis travel: 400 mm Table dimensions (L x W x H): 1,170 x 730 x 160 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,700 mm x 1,100 mm x 2,300 mm Machine weight: 900 kg EQUIPMENT Granite inspection plate Manual control Documentation and CDs Dsdpfoyr H Drex Ag Rokk External reference: Lot 9

Year of construction: 2020, condition: used, machine/vehicle number: 70066220, Model: 191-125, with 1 motorized swivel head RENISHAW PH10MQ, 1 control unit RENISHAW PHC10-3 PLUS, 1 control unit MITUTOYO UC480-2, 1 hand controller MITUTOYO JSBOX-M2 (JR24), 2 probe changer systems RENISHAW FCR25, each 3-position, with RENISHAW aluminium frame, various accessories Dkjdpfxjyztiuj Ag Rok

Condition: used, Year of construction: 1997, x-travel 1500 mm y-travel 800 mm z-travel 600 mm weight of the machine ca. 2,7 t dimensions of the machine ca. 2,66 x 1,60 x 3,10 m CNC-controlled Coordinate Measuring Machine for fully automatic measuring of workpieces. Incl. Measuring Software MDM Metrosoft Dkjdpfx Aed Il A Reg Rjk Level 2 for measuring of: - Points, surfaces, circles, cylinders, cones, distances and angles. - SPC software for statistic evaluation of the measurements Machine not operational!

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 22320321, total height: 2,300 mm, total width: 1,200 mm, total length: 1,300 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 300 mm, overall weight: 1,000 kg, Equipment: documentation/manual, MITUTOYO CRYSTA-PLUS M 574 coordinate measuring machine - incl. granite measuring plate - plate dimensions: 1200 x 840 mm - incl. documentation, calibration sphere, probe, and hardware Attention: The item must be definitively collected between 21.04. and 30.04.2026, on a date yet to be agreed upon. Dkodpfxeym R S Nj Ag Rsk FCA D-96257 Marktgraitz – loaded on truck

Condition: good (used), functionality: fully functional, machine/vehicle number: 9B810117, total height: 700 mm, total width: 700 mm, total length: 800 mm, overall weight: 150 kg, KEYENCE XM - T 1000 3D Coordinate Measuring Machine - incl. measuring head, Type: XM C 1000 - Camera: 4 megapixels, CMOS image sensor - Central wavelength of light reception: near infrared, measuring range: 300 x 250 x 150 mm - Smallest display unit: distance 1µ, angle: 0.0001° - Measuring repeatability with locked measuring table: ±3µ - Measurement deviation with locked measuring table: ±8µ - Maximum load capacity: 25 kg - Number of probes: 1 - incl. handheld probe Note: The item must be collected between 21.04. and 30.04.2026 on a binding date to be agreed upon. Djdpfx Agoym R R Ss Rekk FCA D-96257 Marktgraitz - loaded onto truck

Condition: not inspected (used), Year of construction: 1997, Attention: Sale on behalf of the seller ● Serial number: CMM970103039 ● Availability: By arrangement ● Payment terms: Advance payment – by bank transfer ● Internal no.: S3 Technical data: ● Measuring range X/Y/Z: 500/550/515 mm Scope of delivery: ● Available manuals ● Available measuring accessories as shown in the pictures Dimensions & weight: ● Installation dimensions L x W x H approx.: 1500 x 1500 x 2400 mm ● Weight approx.: 1000 kg Additional notes: ► On request, we can offer transport to the place of destination Dkjdoyyx Tpepfx Ag Rok ► The offer price is net, plus VAT ► Goods are sold with exclusion of any warranty ► Technical data subject to change without notice ► Subject to prior sale ❗ Sale exclusively to businesses ❗

Condition: excellent (used), Year of construction: 2020, Measuring head: LM -1100 Image sensor: B/W CMOS, 1", 20 megapixels Dkjdpjywk Nqsfx Ag Rek Display: 10.4" LCD monitor (XGA: 1024x768) Measuring mode with wide field of view: 225 x 125 mm High-precision measuring mode: 206 x 106 mm For further data, please refer to the PDF file!

Condition: like new (used), Year of construction: 2013, operating hours: 400 h, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 20 kg, total height: 890 mm, total width: 986 mm, total length: 705 mm, overall weight: 170 kg, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, SPECIAL OFFER with optional full service (delivery, commissioning) Technical Specifications of the HEXAGON OPTIV CLASSIC 321 GL tp Measuring Machine Year of manufacture: 2013 Maximum traverse speed in X, Y, Z axes: 160 mm/s Maximum workpiece weight: 20 kg Measurement resolution: 0.05 µm Measurement accuracy in X, Y axes (optical sensor): Ex, Ey = (1.6 + L/250) µm Measurement accuracy in XY axes (optical sensor): Exy = (2.0 + L/250) µm Measurement accuracy in Z axis (optical sensor): Exy = (3.9 + L/200) µm Measurement accuracy in X, Y axes (touch-trigger probe): Ex, Ey = (2.0 + L/250) µm Measurement accuracy in XY axes (touch-trigger probe): Exy = (2.5 + L/250) µm Measurement accuracy in Z axis (touch-trigger probe): Ez = (2.9 + L/200) µm Measuring volume Optical Sensor: X 300mm Y 200mm Z 150mm Measuring volume tactile sensor: X 230mm Y 200mm Z 150mm Dimensions (L x W x H): 705 x 986 x 890 mm Machine weight: 170 kg Measuring machine features: 3-axis microprocessor CNC with vector path control Metrology software: PC-DMIS Vision Dkodpfx Agexmgvps Rok Vision sensor for non-contact measurement of the smallest and most precise components CCD camera with 6.5x motorized CNC zoom DC servo motors TESA touch probe system (1 body and 1 module) Modular probe changer: TESASTAR with 4 slots and 4 modules Linear guides on all axes Coaxial LED incident light (white LED) LED backlight (green LED + diffuser) Multi-segment LED ring light Including evaluation computer by Dell Optional services: Delivery (extra charge) Commissioning (extra charge)

Condition: used, Year of construction: 2014, x-axis 1.200 mm y-axis 3.000 mm z-axis 1.000 mm solution 0.0001 mm max. workpiece height 1.200 mm max. workpiece weight 3.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Dodpfx Agjxyaf Ds Rjkk Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 640 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, total height: 2,320 mm, total width: 920 mm, total length: 1,130 mm, compressed air connection: 4 bar, Equipment: documentation/manual, Aberlink Axiom too 600 CNC CMM Machine Type: CNC Co-Ordinate Measuring Machine Dkodpfx Agjyap R Ro Rjk Version: Axiom too 600 Year: 2007 Condition: Like New as had very little use Includes Upgrade to full CNC Auto Temperature Compensation SMC Refrigeration Air Dryer Aberlink Software PC & Monitor Description When the original Axiom CMM was released in 1997 it revolutionised CMM design utilising extremely innovative CMM technology. The Axiom was hugely successful but now Aberlink have taken all the best features from the original model and improved upon them. The Axiom too offers a larger measurement volume and higher accuracy than its predecessor, incorporating the very latest in materials technology. This Axiom too is the 600 size and is full the CNC version. Technical Specifications Measuring Volume: 640 x 600 x 500mm Accuracy: B89 0.008/300mm (VDI (U3) 0.0035 + L/250mm) Measuring System: Renishaw readheads and tape scale Resolution: 0.0005mm Probe System: Renishaw Max Velocity Vector: 500mm/sec Max Acceleration Vector: 1000mm/sec2 Bearings: Air Bearings on all axes Z Axis: Pneumatically counterbalanced Max Balance Weight: 1kg Air Consumption: 23 I/min (0.8 cfm) at 4 bar Required Air Pressure: 4 bar (60psi) Software: Full Graphical Interface designed for Windows Dimensions: 1130 x 920 x 2320mm Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Dkjdpfx Agexyungo Rok Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control. Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2016, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, Coordinate measuring device for simple inspection of components directly on the production floor. Measurement routines can be visually displayed step by step for untrained operators. The device was purchased in 2016 but was used only briefly as it proved unsuitable for the intended application. It is in nearly new condition and comes in its original packaging. Manufacturer: Keyence Model: XM-1000 Year of Manufacture: 2016 Measuring range: 300 x 250 x 150 mm Repeatability: ±3 µm Measurement deviation: ±8 µm Dkedjyy R Irjpfx Ag Rjk Equipment: - XM-1000 measuring system - XM-1500 measurement computer - XM-P1000 measuring probe - Several probe heads / balls - Documentation - Original packaging

Condition: ready for operation (used), Year of construction: 2020, General Data Machine weight 2350 kg Measurements height 2700 mm Dimensions Machine Length 2100 mm Main Drive Number of axis 3 Movement X-Axis Movement 600 mm Dkodpfx Agox D Hvqe Rjk Z-Axis Movement 500 mm Y-Axis Movement 700 mm This 3-axis EROWA CMM Qi was manufactured in 2020. It features a travel range of 600mm on the X-axis, 700mm on the Y-axis, and 500mm on the Z-axis. The machine can handle a maximum workpiece weight of 650kg and includes advanced components like the PH10MQ touch probe system and FCR25-L6 touch probe changer. Ideal for precise measurements in quality control processes. Contact us for more information about this machine. Application Types Measuring

Condition: good (used), Year of construction: 2005, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 405 mm, workpiece weight (max.): 180 kg, total height: 2,200 mm, total width: 1,100 mm, total length: 1,100 mm, travel distance X-axis: 505 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 405 mm, overall weight: 520 kg, input voltage: 230 V, operating temperature: 1,626 °C, pressure: 4 bar, Very nice and visually appealing 3D CNC measuring machine at a very attractive price. Three-dimensional measuring within three microns! Fully meets its specifications. Inspection and demonstration are possible. Measuring range: X-axis 505 mm Y-axis 405 mm Z-axis 405 mm Specification ISO 10360-2 MPEE = [2.9 + 3.0L/1000] µm (at a temperature of 16 ... 26 °C). Dkjdpfxoywd Elo Ag Rok Resolution 0.0001 mm CNC speed 520 mm/sec Maximum acceleration 0.23 g Can be loaded with workpieces up to 180 kg Height 220 cm Width 110 cm Length 115 cm Air-bearing axes (5 Bar supply) Operates on 230 Volt to controller (CMM itself is low-voltage) Includes PC, monitor, mouse/keyboard Software MCOSMOS-1 v3.0 (upgrade possible)

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Used Machine - Mitutoyo Crysta Apex C7106 Here I offer a very well-maintained 3-D coordinate measuring machine from the manufacturer Mitutoyo. The machine is built in 2004. The machine was used exclusively in an air-conditioned measuring room. It is a TOP equipped machine with which you can start immediately! Of course, we can also offer transport, setup and commissioning as well as calibration (factory or DAkkS) so that you do not have to worry about the individual items! Specifications see attached PDF. Dedjvpdhxspfx Ag Rskk Leasing possible. (All prices are NET)

Condition: ready for operation (used), With this offer, you are purchasing a used Keyence WM-3000 mobile coordinate measuring system. Item for sale: 1 x Keyence WM-3000 with the following equipment: Includes camera tripod Includes laptop with measuring software Includes Messtatser battery Includes transport case Dksdpfx Agjxzn E Uj Rek Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. For more information, please feel free to contact us personally.

Condition: ready for operation (used), Year of construction: 2010, Main Drive Number of axis 3 Movement X-Axis Movement 800 mm Y-Axis Movement 1000 mm Z-Axis Movement 700 mm Additional Equipment Probes: 2 included Dsdex D Nrhjpfx Ag Rokk This 3-axis Wenzel XO 87 was manufactured in 2010. It features a robust CMM machine design with X-axis travel of 800mm, Y-axis at 1000mm, and Z-axis at 700mm. If you are looking to get high-quality measuring capabilities, consider the Wenzel XO 87 machine we have for sale. Contact us for more information. Application Types Measuring

Year of construction: 1998, condition: excellent (used), Coordinate measuring machine ETALON Derby 454 Measuring range 457x508x406 mm Dimensions LxWxH 895x885x1575 mm weight approx 220 kg Renishaw TP8 measuring head Dkedpfxjkvm Txj Ag Rok last calibration 2020

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 46270311, total height: 2,400 mm, total width: 1,100 mm, total length: 1,200 mm, travel distance X-axis: 550 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 300 mm, overall weight: 1,500 kg, Equipment: documentation/manual, MITUTOYO CRYSTA-PLUS M 544 3D coordinate measuring machine - incl. granite measuring plate - Plate dimensions: 880 x 830 x 160 mm - incl. gauge rings and documentation Note: The item must be definitively collected between 12.05. and 22.05.2026 on a mutually agreed date. Dkodpsyvr Ekefx Ag Rjk FCA D-74821 Mosbach – loaded onto truck

Condition: good (used), Year of construction: 1987, We offer you: Jig Grinding Machine Manufacturer: HAUSER Model: S3-DR Year of manufacture: 1987 Technical specifications: Travel: - X-axis: 400 mm - Y-axis: 250 mm - Z-axis: 300 mm Accessories, depicted tools and clamping devices are included in delivery only if specified in the additional information. Subject to changes and errors in technical data and information, as well as prior sale! Djdpfxjxw Sx Ro Ag Rekk

Condition: ready for operation (used), Year of construction: 2020, An optical 2D coordinate measuring machine Werth is available. Measuring range X/Y: 400mm/200mm, electrics: VDE 0113, magnification: 0.2x. Machine dimensions X/Y/Z: approx. 800mm/600mm/1200mm, weight: approx. 200kg. Including two computers, software, and one replacement glass pane. Documentation available. An inspection on site is possible. Dodpsyxq U Asfx Ag Rokk

Condition: repair required (used), Renishaw InVia Raman Microscope Spectrometer Complete with MSC20 Encoded Stage Controller RL532C50 HPNIR Laser Source A-9803-0625 CCD Device is missing some parts to make fully operational. Device is missing Renishaw Ramen Filters as seen in images. Device also is missing original Renishaw Key to open access panel. Dkjdpeym Dt Hefx Ag Rok

Condition: used, functionality: fully functional, measuring range X-axis: 510 mm, measuring range Y-axis: 410 mm, total height: 2,150 mm, total width: 1,100 mm, total length: 980 mm, travel distance X-axis: 510 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 340 mm, overall weight: 1,000 kg, input voltage: 400 V, table width: 650 mm, table length: 890 mm, DEA SWIFT coordinate measuring machine (CMM) in used, fully functional condition. Robust bridge-type coordinate measuring machine with granite measuring plate, ideal for precise 3D measuring tasks in industry and quality assurance. The machine offers a measuring range of approximately 510 x 410 x 340 mm (X/Y/Z) and is equipped with a touch probe system. Measuring accuracy is approximately 2.5–3.5 µm, enabling high-precision measurement of workpieces and components. The stable granite measuring plate (approx. 890 x 650 mm) and bridge construction ensure high rigidity and repeatability. The air-bearing guides provide smooth and precise movement. Machine dimensions: approx. 980 x 1100 x 2150 mm Machine weight: approx. 1000 kg Fields of application: Dedpfsyw R U Tsx Ag Rekk • Quality assurance • Toolmaking • Mechanical engineering • Metalworking The machine is immediately ready for operation and ideally suited for precise measuring tasks in industrial applications. Inspection possible by appointment.

Condition: good (used), In good technical condition and fully functional. (Like new) Dkodpfowi H S Eox Ag Rek Type: Crysta Plus M544 Manufacturer: Mitutoyo MCOSMOS manual version V4.

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements width 890 mm Measurements depth 788 mm Measurements height 939 mm Machine weight 180 kg Dedjx D H Nwopfx Ag Rokk Main Drive Number of axis 3 This 3-axis Hexagon Optiv Performance 322 was manufactured in 2019. Ideal for precise measurements, this CMM machine represents a reliable solution for enhancing quality control processes. Consider the opportunity to buy this Hexagon Optiv Performance 322 CMM machine. Contact us for more information. Application Types Measuring