Used Copier Printer Scanner for sale (2,702)

Condition: used, EOS Type: P100 Technical Data: External dimensions: 1320 mm x 1067 mm x 2204 mm Technology: SLS Material class: Polymers Materials: PA220 Build volume: 200 x 250 x 330 mm Laser type: CO2; 30 W Capable of producing delicate components with wall thicknesses down to 0.4 mm. Fits through a standard door (1067 mm width); therefore, it can be installed in regular premises. Rjdpfexpux Rox Abdjp + 6 filled powder containers PA2200 (PA12) + 2 build frames 400 V +6%/-10% at 50/60 Hz; CEE 5-pole Condition: used Scope of delivery: (see image) (Subject to technical modifications and errors. All information is provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-state Nd: YVO4with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000mW at the resin surface under standard conditions) Zaphyr TM coating system: Process: Replaceable coating agent Adjustment: Self-leveling and self-correcting Production layer: Minimum 0.05mm Maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Detection of large lines Nominal: 0.76mm Maximum drawing speed Edge detection: 3.5m/sec. Detection of large lines: 25m/sec. Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Ambient conditions Temperature range: 20-26°C Rsdpfx Absnkalgodjp Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirement: Size (WxDxH), unpacked: 1260mm x 2200mm x 2280mm Weight packed (no RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Concept Laser M2 cusing Multilaser: System technology for the safe processing of aluminum and titanium alloys, etc. External dimensions: 2542 x 1818 x1987 mm (WxDxH) Weight: 2300 kg 2 lasers 400W Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Protective gas possible through 2 connections for external N2 generators (optional) Installation space 250 x 250 x 280 Layer thickness 20-80μm Production speed 2-20cm³ (depending on material and laser power) Operating conditions 15-35 degrees Celsius Laser service life Laser 1: 501 hours Laser 2: 503 hours Other devices: Inox 200 lifting device Weight: 102 Kg Max lifting capacity 135 Kg Protection class IP65 Rodpfx Abeu Ebybjdep Wet cutter NA 7-11 H CL EU Zone 22 Dimensions 800x480-570x755-850 mm Drive type: alternating current Power 1.25 kw Voltage 230 V 9.2 A Protection class IP65 Frequency 50 Hz Housing: sheet steel Performance 130 m³/h Permanent negative pressure -145 mbar Short-term negative pressure -235 mbar Liquid volume 7 l Water consumption: 0.26 l/h Weight: 50 kg QM powder Automatic Sieving Station Power supply: 3/N/PE AC 400 V +/- 10% 50/60 Hz Max. current consumption: 3A / phase Inert gas: 5 bar Condition: used / used Scope of delivery: (See picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. Thus, even large models can be manufactured without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one print run. 3D color printer with enormous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. Redehb Dtpspfx Abdjp This eliminates the need for dedicated support structures, even for complex and detailed prints with these 3D printers. The unconsolidated powder supports the parts during printing and is then recycled semi-automatically. Areas of application Communication of form and design, installation analysis, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for thermoforming, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of full color 3D printing systems. Technical data: ZPrinter ProJet 660 Pro 3D Printer Size: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum detail size: 0.1 mm Automation: Complete (automated set-up and self-monitoring, automated print

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Redpfx Abjk Hz Nqodop Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), German RepRap 3D Printer Here we offer you a German RepRap 3D printer. The X1000 from German RepRap is a large capacity 3D printer that produces industrial quality objects. 3D Printer Datasheet: Rjdpfoivpdwjx Abdop German RepRap X1000 Manufacturer: German RepRap Country: n.a. Material: Standards (PLA, ABS, PP ...) Technology: Fusion layering (FDM/FFF) Pre-assembled: n.a. Dimension: 1725 × 1500 × 1320 mm (67.91 × 59.06 × 51.97 in.) Weight: 400 kg / 881.8 lbs Nozzle diameter: 0.4 / 0.6 mm ( in.) Minimum print density: n.a. Print speed 150 mm/s mm/sec Precision XY: XY : 20 µm µm Max. Volume: 1000 × 800 × 600 mm File format: n.a. Software: Simplify3D Connectivity: Wi-Fi OS compatibility: n.a. Power: n.a. Other features: Touchscreen Type: German RepRap X1000 Condition: used / used Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: ready for operation (used), Year of construction: 2021, total height: 1,950 mm, overall weight: 350 kg, number of axes: 3, General Data Measurements width 940 mm Measurements depth 900 mm Measurements height 1950 mm Machine weight 350 kg Main Drive Rsdpjx D Sqmsfx Abdsp Number of axis 3 Additional Equipment Double extrusion head per print module, equipped with a cleaning system for the print head to print complex geometry with soluble support. 3 print modules with different temperature specifications specially developed for the different materials. This 3-axis 3DGence Industry F420 was manufactured in 2021, featuring Fused Filament Fabrication with a dual extrusion head and a cleaning system for complex geometries. It includes three print modules for various materials, a 380 × 380 × 420 mm working chamber, and temperatures up to 500°C for the print head. If you are looking to get high-quality 3D printing capabilities, consider the 3DGence Industry F420 machine we have for sale. Contact us for more information about this machine. Application Types 3D Printing

Condition: ready for operation (used), Used,good condition Rodpfxoynwd Ij Abdjp

Condition: good (used), At least 10 Sato SP40 label printers - 203 dpi, thermal printing, USB, fast, compact - used - : Price per unit from location: only €159 (net)! Rjdpfxjvx E R Ho Abdep Manufacturer: Sato Type: SP40 Year of manufacture: unknown Print technology: thermal printing (direct) Print resolution: 203 dpi, for razor-sharp and easy-to-read labels Maximum print width: 104 mm, perfect for common label formats Maximum print speed: Up to 152 mm per second for fast print jobs Media: Suitable for labels, tags and paper rolls with a width of 25 to 110 mm User-friendly: Easy operation thanks to a clear LCD display and simple button control Compatibility: Supports common label software and a variety of barcodes such as Code 128, EAN, UPC and many more Connections: USB, serial (RS-232) and optional LAN - flexible in integration into your existing system Compact and robust: The space-saving design ensures a long service life and fits into any work environment The Sato SP40 label printer is the perfect choice for anyone looking for a reliable and easy-to-use printer for labels and search for barcodes. With its compact design, it fits into almost any office or work environment and offers fast and precise printing performance. Ideal for small and medium-sized businesses, it helps you efficiently create labels for products, shipping or warehouse management. Condition: good Available: immediately Location: Braunschweig

Condition: good (used), approx. 7 pieces Sato printer CG408DT-LAN thermal printer with LAN connection | label printer - used - : Price per piece from location: only €85 (net)! Manufacturer: Toshiba Type: CG408DT-LAN Year of manufacture: unknown Sato printer CG408DT-LAN - label printer with LAN connection Sato printer CG408DT-LAN, a reliable thermal printer for professional labeling in various areas of application such as warehouse, logistics or office. The LAN connection means the printer can be easily integrated into the network, which ensures flexible use. Product details: • Model: Sato CG408DT-LAN • Print technology: Thermal printing (direct thermal printing) • Print resolution: 203 dpi • Print speed: Up to 152 mm/s • Media width: 25 mm to 112 mm • Connection: LAN connection (network capable) • Areas of application: Label printing for logistics, shipping, warehouse, retail The printer is in perfect condition and offers high print quality with fast turnaround times. Ideal for a variety of label formats. Rsdpfevx E Raox Abdjp Condition: good Available: immediately Location: Braunschweig

Year of construction: 2015, condition: excellent (used), Dip-Tech GlassJet AR6000, Digital Printer for Glass, year 2015 Print resolution: 360 dpi (real) DIP SPECTRUM INK: Ceramic ink for both tempered and fired annealed glass Ink colors: Black, white, etch imitation, and various spot colors There are currently 7 print heads in operation: 4 black and 3 white. They enable the printing of black and white. Maximum glass size: 3300 x 6000 mm Minimum glass size: 400 x 400 mm Glass thickness: 2 – 19 mm Operators: 1 Inline functions: Continuous conveyor Overall dimensions: 6071 x 7746 x 1600 mm (width x length x height) Image format: All common graphic formats including: PDF, PS, EPS, Tiff, BMP and JPEG Ambient temperature: 18 – 25 C Rsdpfxorhkp Eo Abdep Installed power: 400 VAC x 16A, 3 Ph. 50/60Hz In very good condition. Dismantled in February 2024. Available: NOW

Condition: good (used), Year of construction: 1999, Position scanner, laser, barcode scanner Rjdpfeb A N T Nsx Abdsp -10-30 V DC -DS2100 -PG220 -Weight: 2 kg

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,504 h, Equipment: ABS, compressor, Printer is fully functional and it is still under power. Printer was not used much often only 1504 working hours Redpow Imk Rsfx Abdep There are available all model materials licences available in 2019. New PM Kit is on site and it will be installed just before printer dispatch to the new customer Support removal unit type EFT-900 is available

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: UMF00631, Speed: prints Up to 70 p / m. Counter: Print Total: 1‘618‘150 Equipment / Additional information: Rsdpfexzg Diex Abdjp - Envelope printing - Stapling - 2 or 4 hole punching - Folding - Three-knife trimmer - Scanning Printing method: color laser printing Print resolution: 2,400 x 2,400 dpi Max. Paper capacity: 7,650 sheets (A4 / A3) Max. Output capacity: 11,200 sheets (A4, 80 g / m²) Possible formats: Paper cassettes 1, 2 and 3: Standard formats: A4, A4R, A5R, A3, SRA3, maximum 330 x 483 mm Multi-purpose tray: Standard formats: A4, A4R, A5R, A3, SRA3, maximum 330 x 483 mm Envelopes: No.10 (COM10), Monarch, ISO-C5, DL Possible grammages: Standard cassettes: 52 to 220 g / m² Multi Purpose Tray / Optional Paper Trays: 52 to 300 g / m² Double-sided printing: 52 to 300 g / m² 2 complete sets of toners THE FOLLOWING NEW & ORIGINAL CANON TONER CARTRIDGES ARE AVAILABLE FOR PURCHASE: 2x Canon imagePRESS Toner T01 Yellow 2x Canon imagePRESS Toner T01 Magenta 2x Canon imagePRESS Toner T01 Cyan 2x Canon imagePRESS Toner T01 Black Very good condition / Totally revised 3 months ago (approx. 9000 CHF)

Condition: good (used), Position scanner, laser, barcode scanner Rodpfob A Sniex Abdsp -Voltage: 230VAC 50Hz 110mA -Sec: 10 V 1000 mA 10 VA -Laser class: 2 -Weight: 2 kg

Condition: good (used), Position scanner, laser, barcode scanner Redpfx Ajb A Spgsbdop -Type: LS50HR3 -Voltage: 4.75-28 VDC Price: per piece Quantity: 2 available -Weight: 0.7 kg

Condition: refurbished (used), functionality: fully functional, Year of construction: 2019, total length: 1,450 mm, total height: 1,800 mm, total width: 1,100 mm, type of input current: three-phase, overall weight: 3,000 kg, warranty duration: 12 months, table width: 1,450 mm, tank capacity: 19 l, table length: 1,100 mm, workpiece weight (max.): 150 kg, PRICE 95,000 EUR (excl. VAT) SERVICE INCLUDED IN THE PRICE: - Wood crate for international shipping - Installation and calibration delivered by a former Massivit employee, certified on Massivit systems - On-site operator training delivered by a former Massivit employee, certified on Massivit systems - Post-installation remote technical assistance hardware and software ( g-code production) - 1 year warranty included Professional installation delivered by a former Massivit employee, certified on Massivit systems. Possibility to run sample prints upon request DESCRIPTION of the Machine Large-scale industrial 3D printer Massivit M1800 Pro, model year 2018, professionally refurbished and fully functional. Installation, operator training and post-installation technical assistance are included and provided directly by Massivit-certified personnel. This ensures correct setup, optimal calibration and a fast, reliable start of production. The machine is equipped with dual independent print-heads and offers a build volume of 145 × 111 × 180 cm, making it suitable for the production of oversized parts, molds, master models and display elements. The system operates with GDP (Gel Dispensing Printing) UV-cured technology, enabling high-speed manufacturing of large components with reduced support requirements, resulting in lower material consumption and reduced post-processing time. The printer has been refurbished using original-spec components and has undergone full mechanical alignment, calibration and functional testing. The machine can be inspected under power by appointment. Typical applications include visual communication, automotive and marine components, architectural elements, industrial prototyping, scenic construction and composite mold manufacturing. TECHNICAL DATA Machine type: Industrial large-format 3D printer Manufacturer: Massivit Model: M1800 Pro Year of manufacture: 2018 Build volume: 145 × 111 × 180 cm Print system: Dual independent print-heads Technology: GDP – UV-cured gel deposition Support requirements: Reduced Maximum part height: 180 cm Machine weight: approx. 3,000 kg Electrical connection: Three-phase Material compatibility: Dimengel 90, Dimengel 100, Dimengel 300 Transparent Material tank capacity: 19 L Condition: Professionally refurbished Functionality: Fully functional, testable under power REFURBISHMENT DETAILS - Dispensers refurbished with new stators, bearings, and couplings - Hydraulic pump refurbished with a new stator Rsdoxx S Diepfx Abdop - Gel filtration system refurbished with new filters installed - UV curing modules tested and calibrated - XYZ belts tensioned and full table alignment performed - Complete system functionality refurbished and verified before sale PRICE 95,000 EUR (excl. VAT)

Condition: not inspected (used), Dear Sir or Madam We hereby offer you the following device for sale: Rjdpfxjwktwkj Abdep Keyence Agilista 3200W 3D printer. The machine is sold with the equipment documented in the photos and recorded in the advert text. Location: 40764 Langenfeld ATTENTION: The device comes from an insolvency. We are auctioning it for the highest bid on behalf of the creditor/bank. This is a closed auction. We do not give any information about the current highest bid. Your bid becomes binding upon receipt by e-mail. Please inform us of your binding bid by 07.12.2025 at 10 am. You will be informed of the outcome of the auction within 72 hours of the end of the auction.

Condition: used, functionality: unexamined, machine/vehicle number: EVO-lizer A4, Year of construction: 2015, operating hours: 4,413 h, total length: 720 mm, total height: 720 mm, total width: 540 mm, type of input current: AC, overall weight: 64 kg, input voltage: 230 V, input current: 4 A, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, positioning accuracy: 0.05 mm, table width: 270 mm, tank capacity: 11 l, table length: 195 mm, noise level: 46 dB, number of print heads: 2, Used FDM 3D Printer EVO-lizer A4 Device Data: Printer dimensions (W x D x H): 540 x 720 x 710 mm Weight: 64 kg Connection data: 230 VAC; 50/60 Hz; 4A Ambient temperature: 15 – 35 °C Ambient humidity: 30 - 70 % Acoustic Data: Idle mode: 40 dBA Operating mode (1 m distance): 46 dBA Operating mode (40 cm distance, door open): 62 dBA Technical Data Sheet: Print bed size (W x D x H): 270 x 195 x 205 mm Minimum layer thickness: 0.10 mm Positioning accuracy: 0.05 mm Redpjxu I R Dsfx Abdjp Nozzle temperature range: 160 – 260 °C Print bed temperature range: 30 – 100 °C Filament material: ABS, PLA Filament diameter: 1.75 mm Software/slicing program: EVO-lizer

Condition: ready for operation (used), Mitsubishi K7PRFE Printer Interface Unit, serial no. according to photo, with connection cable, in leatherette bag, used, normal traces of use, 100% functional, scope of delivery according to photos Rodpfx Abji Eb Nhodep

Condition: ready for operation (used), Accu-Sort-Systems 45L Laser Barcode Scanner, serial no. according to photo, used, normal signs of wear, 100% functional, scope of delivery according to photos Rodoi D Ttdepfx Abdsp

Year of construction: 2026, condition: new, new PMH filament line Rsdpjch Sfqofx Abdop extruder 30 mm - 28 l/d with noozle for 3D-filament with cooling tank with blow-up system for adhesive water with Laser control system (option) with puller with filament accumulator (option) with winder and traverse guide MADE in GERMANY

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, DMG MORI DMG MORI LASERTEC 30 SLM (2nd Gen.) Metal 3D Printer 600–1000 W Fiber Laser For sale is a DMG MORI LASERTEC 30 SLM 2nd Generation, a professional industrial system designed for metal 3D printing using the Selective Laser Melting (SLM) process. This machine is ideal for highly precise functional components, prototypes, lightweight structures, and small-batch production in industry, aerospace, medical technology, and toolmaking. The system has been professionally operated and maintained, and is in excellent condition. Machine Specifications: Model: LASERTEC 30 SLM 2nd Gen. Year of manufacture: 2019 Weight: approx. 1300 kg Dimensions: approx. 1900 × 1100 × 2000 mm Build volume: 300 × 300 × 300 mm Layer thickness: 20–100 µm Laser type: Ytterbium fiber laser Laser power: 600–1000 W Materials: Stainless steel, tool steel, titanium, aluminum, CoCr, Inconel, etc. Control: CELOS Touch-Screen Electrical Data: Supply: 400 V ±10 %, 50/60 Hz Power consumption: 17.3 kVA Max. current draw: 25 A Recommended circuit protection: 25–32 A DC control voltage: 24 V AC control voltage: 400 V Shielding Gas Supply: Gas: Argon 4.6+ Minimum consumption (flooding): 1000 L Average consumption: 72 L/h Gas pressure: 6–8 bar Connection: W21.80 × 1/14" Cooling System (HYDAC RFCS-G2-002600): Refrigerant: R134a Cooling capacity: 2.2 kW Pump capacity: 15 l/min at 3 bar Dimensions: 871 × 610 × 639 mm Weight: approx. 80 kg Fire Extinguishing System: Automatic LIFDESTM system Rjdpsx Ei Smsfx Abdjp Activation temperature from 110 °C Optical & acoustic alarm (95 dB) Important Note: "The table shown in the photos is not included in the sale." Condition: used The system was fully operational until dismantling, clean, well-maintained, and is in excellent technical and optical condition. Scope of delivery: (see picture) - DMG MORI LASERTEC 30 SLM machine - HYDAC industrial cooler - DMG MORI SmartKey USB dongle - Comprehensive documentation (several folders) - Integrated powder sieving machine - Filter element - Accessories as pictured (Subject to technical changes and errors in specifications!) For further questions, please do not hesitate to contact us by phone.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 50 h, total length: 1,000 mm, total height: 500 mm, total width: 500 mm, type of input current: AC, overall weight: 550 kg, temperature: 280 °C, ambient temperature (min.): 15 °C, ambient temperature (max.): 28 °C, positioning accuracy: 0.1 mm, wall thickness: 1 mm, space requirement length: 2,715 mm, space requirement height: 2,765 mm, space requirement width: 2,170 mm, High-performance materials: Best-in-class print heads With its nozzles, the STUDIO G2 is ready for printing with fiber-reinforced and other industrial-grade materials at maximum speed and precision. The specially designed extruder achieves a high level of detail with layer thicknesses as low as 0.1 mm on objects up to one meter long. This allows for more options for perfecting a part's mechanical properties. Optimal printing temperatures: The temperature-controlled build chamber The STUDIO G2's enclosed, temperature-controlled print chamber creates perfect conditions for printing with industrial-grade materials. The transparent doors allow users to visually monitor the printing process with safe and easy access to the print bed. User-friendly features such as automatic pausing when the housing is opened ensure a smooth and safe printing process. Redpfxjwgbcyo Abdjp Independent Temperature Control: Heated Filament Chambers The STUDIO G2's integrated heated filament chambers ensure that the printing materials remain dry in a constantly controlled environment, guaranteeing print quality unmatched in this class. The filament chamber exceeds industry standards by offering temperature control independent of the print room. Optimal Print Temperatures: Fast-Heating Print Bed Low setup time thanks to a fast-heating print bed. Increased bed temperature up to 100°C improves adhesion for a wider range of materials. New inductive sensor for fast, precise semi-automatic bed leveling. Simple & Intuitive: The New Slicer The user-friendly BigRep "BLADE" slicing software allows for greater control over printing parameters and offers presets for all BigRep-compatible materials, enabling a quick, hassle-free start to print. BLADE is one of the fastest and most precise slicers on the market, specifically optimized for large-format printing. Large enough for every idea: The large print area Create space for innovation with the STUDIO G2's large 500 mm x 1000 mm x 500 mm print area, packed into a compact housing and with features optimized for fast, high-resolution printing of large-format, industrial-grade parts.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, DIP-TECH AR 6000 (2013) + Integrated Drying Module Rsdpfxjymb Tqe Abdop Technical specifications: • Max glass size: 3000 × 6000 mm • Min. glass size: 500 × 500 mm • Glass thickness: approx. 4–19 mm • Printing technology: Digital ceramic ink printing directly on glass • Drying module: Integrated dryer included • Ink type: Ceramic inks – tempering compatible • Printing technology: Digital ceramic in-glass printing • Application: Architectural & interior glass • Glass types: Float, tempered, laminated Key Advantages ✔ Large-format industrial printer (6-meter capability) ✔ Integrated drying module – faster production cycle ✔ Improved ink stabilization before tempering ✔ Reduced print defects and handling risks ✔ Suitable for façade, architectural and interior glass ✔ Machine in production – ready for immediate operation Inspection possible under power.