Used Copper for sale (477)

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Dodjgwt Ryopfx Ac Necg Furnishing • Precision underfloor circular saw • Miter adjustment left 45º / 90º / right-45º degrees • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 125 mm • Saw blade 350mm • Saw blade not included!

Condition: new, Year of construction: 2026, pressure: 6 bar, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Dcodpfxogcbwge Ac Nog

Condition: new, Year of construction: 2026, The UK 500 HA semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 500 HA has an infinitely adjustable miter range of up to 30° on the left and 0° on the right. The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) Dcedpfxogwt R Do Ac Nsg • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 180 mm • Saw blade 500mm • Saw blade not included! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, laser power: 3,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, table length: 3,000 mm, table width: 1,500 mm, TRUMPF TruLaser 5030 3kW Fiber with LiftMaster! Laser head replaced in 2024 TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Cutting heads: 1 Maximum sheet thickness (mild steel): 20 mm Dcedpfx Aceygw Rls Nog Maximum sheet thickness (stainless steel): 15 mm Maximum sheet thickness (aluminium): 15 mm Maximum sheet thickness (copper): 4 mm Maximum sheet thickness (brass): 3 mm Laser power: 3,000 W Laser source: TruDisk3001 (4C) MACHINE DETAILS Control unit: CNC Last documented maintenance: 10-12 September 2025 Operating hours: as of September 2025 – 53,082 h (currently approx. 54,000 h) Dimensions & Weight Required space: 9,300 x 4,700 x 2,200 mm Weight: 12,700 kg Electrical connection: 40 kVA / 80 A Power consumption: 23 - 33 kW EQUIPMENT CE documentation and manuals LiftMaster Automatic nozzle changer Extraction/filtration system Operating manual Chiller + extraction Compressor not included Please note: Transport of the machine requires 1 standard truck and 1 truck with 3 m width.

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 137 kW (186.27 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,795 kg, input voltage: 400 V, total width: 2,020 mm, total length: 3,800 mm, total height: 1,970 mm, warranty duration: 6 months, heating capacity: 154 kW (209.38 HP), Aircooled chiller/Heat pump GALLETTI MLE144PS2A 137 kW/154 kW Cooling capacity: 137 kW / 38.96 tons (12/7 — 35°C) Heating capacity: 154 kW / 43.79 tons (40/45 —7°C) Year of manufacture: 2025 Options: Heat pump. Hydraulic module. 4-pipe system. Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Danfoss DSH161A4ALD (scroll, soft starter) Type of refrigerant: R454B Number of fans: 4 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump EBARA 3M40-125/2.2-Q7AE-NEDN Dimensions: 3.8x2.02x1.97 m. Weight: 1795 kg. Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup Dodpfx Aey H Dhlsc Necg After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2026, Take advantage of our portfolio of plastic abrasive media for processing softer materials such as brass, copper, or aluminum. Plastic abrasive media offer a gentler and less aggressive treatment. Like ceramic abrasive media, plastic abrasive media are available in a wide range of grit strengths, shapes, and sizes. We select the optimal media for your components and processes to ensure the best results. Overview of the different geometries and their properties: - Cones (K) have a high mass, resulting in efficient material removal. Their rounded shape enables gentle processing. - Pyramids (P), with their edges, are ideal for deburring operations. Thanks to their pointed design, these media can reach difficult areas such as boreholes. - Tridents (DZ) are especially suitable for processing complex components, such as gear parts or workpieces with grooves. - Paraboloids (PA), similar to cones, use their rounded shape to excel at smoothing and polishing, delivering gentle and even surface treatment. - Lenses (L), with their lower weight, are well suited for soft materials and deliver gentle and consistent material removal. - The Wedge (K), thanks to its versatile geometry, is an optimal abrasive for deburring. Its pointed shape means it can easily access narrow slit areas. Dedpfxjyq N S Ne Ac Nocg - Tetrahedrons (T) function similarly to pyramids, with their edges providing efficient deburring. Their sharper corners allow them to better access complex areas. As an experienced partner, we provide expertise in the field of vibratory finishing. Together with you, we develop efficient solutions to achieve optimal process results. If you are interested, we look forward to hearing from you. We will gladly provide you with non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations take place via telecommunications (e-mail, telephone, messaging platform). We will initially send you a non-binding offer, which will also include our general terms and conditions with legal notice and information about your right of withdrawal, before any purchase or contract is concluded.

Condition: new, Year of construction: 2026, Aluminum circular saw UK 800 HA, semi-automatic The UK 800 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 800 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! Dcjdpsidun Iefx Ac Neg equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 800 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Dcjdogwt Rvepfx Ac Nog

Condition: new, Year of construction: 2026, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling Dcedjgwt S Espfx Ac Nog • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: like new (used), Year of construction: 2025, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, table width: 800 mm, table length: 1,200 mm, Machine type: Die-Sinking EDM Machine Manufacturer: ONA Model: IRIS6 Year of Manufacture: 2025 Condition: As new – demonstration machine. Technical Data X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Table length: 1200 mm Table width: 800 mm Description Demonstration machine in a showroom – has not been used in production. ONA IRIS 6 X: 1000 mm Y: 600 mm Z: 500 mm C axis 360° Positioning resolution: 0.001 mm XYZ positioning resolution: 0.0001 mm Feed rate: 3000 mm/min Rapid traverse: 18000 mm/min Work tank dimensions: 1700*1000*600 mm Door type: automatic drop-down doors Table dimensions: 1200*800 mm Maximum dielectric height: 565 mm Maximum workpiece height: 515 mm Distance from head to table without C axis: 800 mm; with C axis: 760 mm Maximum electrode weight: 50 kg Maximum table load: 4000 kg Machine dimensions: 3300 x 3370 x 2930 mm Machine weight: 7400 kg 21" touchscreen color TFT display Generator: 100 A Maximum material removal rate with copper (mm3/min): 550 Maximum material removal rate with graphite (mm3/min): 660 Copper volume wear: < 0.10% Dcedpfx Ajy D R Sfoc Njg Graphite volume wear: < 0.05% Filtration system: ONA eco self-cleaning long-life filter (no cartridges) Flushing: via central tool holder / tank – both programmable within 1–31 Additional equipment installed on the machine: - precision pressure measuring scales - central automatic lubrication system - C axis + automatic Erowa ITS 100 chuck - machine head prepared for vapor extraction - 9-position automatic tool changer - CNC access to shared files in Windows networks - machine file sharing in Microsoft Windows networks - 1650 liters of ONA dielectric fluid - ISL function – online diagnostics - dielectric chiller matched to 100A generator performance - 3 mm measuring probe

Condition: used, Year of construction: 2017, Working hours laser on: 28.313 h Working hours beam on: 8.421 h Laser power: 6000 Watt Working range laser: 3048 x 1524 x 70 mm Max. steel: 25 mm Max. stainless steel: 30 mm Max. aluminium: 30 mm Max. copper: 12 mm Max. brass: 12 mm Length: 11000 mm Width: 6050 mm Height: 2565 mm Machine weight: 12000 kg Electrical connected load: 31 kW Standard configuration - Maximum positioning speed parallel axis x, y: 120 m/min- Maximum simultaneous positioning speed: 170 m/min- Positioning accuracy Pa: +/- 0,05 mm- Repeatability Ps: +/- 0,025 mm- Maximum workpiece weight: 1100 kg- Operation via panel: ByVision Touchscreen and manual control unit Extended machine accessories - nozzle changer 40 positions- Detection Eye - Cut Control- Power Cut Fiber Dsdpfxsyrfxzo Ac Nocg Automation - ByTrans Extended

Condition: used, Equipment: type plate available, Powerful TIG Welding Unit for Professionals Dsdpeyililefx Ac Nocg The EWM TIG 350 DC FWD is a high-quality, water-cooled DC TIG welding unit from EWM, engineered for demanding applications in metal construction, industry, and professional workshop environments. This high-performance machine enables precise DC TIG welding with up to 350 A welding current and offers superior arc stability, high weld quality, and efficient cooling – ideal for steel, stainless steel, nickel alloys, copper materials, and other metal workpieces. 🔧 Welding Performance and Technology Direct current TIG welding (DC) with an adjustable range up to approximately 350 A – powerful penetration and precise control. Robust inverter electronics ensure stable arc performance and high efficiency. The water-cooled design allows continuous operation even under heavy-duty conditions. ⚙️ Features and Operator Comfort Proven operation with an intuitive control panel – easy adjustment of welding parameters. Connection options for remote control and torch functions for added convenience. Splash-proof housing rated to IP23, suitable for tough workshop environments. Energy-efficient operation thanks to high efficiency and standby function. Dimensions: 1000 x 520 x 900 mm Weight: approx. 180kg All information subject to change or errors.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 100 h, Demo unit for sale, not used in production. APEX3R (83 x 168 Inch or 2108 x 4267mm) APEX3R includes Phenolic Table Top, Work Area (2108 x 4267mm), Single Piece All Welded Tube Frame, Stress Relieved and Milled axis Datums, All axis Servo Drive system, X&Y axis Planetary Gear box, Helical Racks & Pinions on X & Y Axis, Z axis Ball Screw, Repeatability +/-0.025mm, Max Slew Rate 70m/min Phenolic Vacuum Grided Table Top, Pop Up Pin Ready; Right Front Pins 3-306-R16; Right Front Pins Locator Pins; Front Right Location 4 Zone High Pressure Manual Ball Valve Vacuum Table Plumbing Units in Millimeters Controller Display Main Electrical Enclosure Kit; Apex3R 380V 3P CE MACHINE VOLTAGE 380V/415V 3PHASE CE Standard Grid Vacuum table 30mm block grid using 6mm gasket tape CE Safety Machine Configuration 300 Standard WidthGantry; 6 inch clearance ATC Spindle: 10 HP (7.S kW) HSD HSK63 (ER40/ 240O0 rpm) 380V 3PH CE Fan Cooled Spindle: Max Shaft Size 1 inch (25-26mm) Pneumatic Controlled Dust Boot Linear Spindle Tool Changer System - Single Row 11 Position HSK63 Dcodpfx Aey Hpkxjc Nog Tool Holder Kit HSK63 QTY 3 - Includes metric collets in various sizes Techniks HSK63 Stand & ER40 Torque wrench Kit Spindle Only Z Carriage; No Knife Kit Surface Probe and Auto Calibration Sensor Apex3R Operator Hands Free material surfacing setup Auto Misting / Lubricating System for ATC spindles Design Designed for ATC spindle machines. Includes both rigid copper and flexiable Loc Line nozzles. Maglube Misting Fluid (1 gallon) Seed based lubricant that works well for Non Ferrious material cutting. Evaporates quickly after initial wipe off. Single Zone Safety Light Curtain Kit Individual Mirror Beam Bender Stanchion Cross Hair Laser Pointer Allows operator to easily set 0,0 location on material to start job using visual red crosshairs Operations Roller Workstation with All in One 24" PC Includes Keypad Stand, Maintenance Override Switch & CE Safety Reset Butto

Condition: used, Fiber laser, fiber laser cutting machine with flatbed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer DURMA Type HD-F III 3015 III BH-IPG 2kW Serial no. 822817712 Year of construction 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area 3000 x 1500 mm Pipe cutting device up to Ø 400 mm Laser power: 2000 watts (fiber laser) Output power: 0.2..2 kW Wavelength: 1070..1080 nm IPG power requirement: 6.4 kW/hour - Polarization random - Collimating focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter in single mode 50,100,200,300 µm - Max. power consumption 42 kW - Machine power consumption 20 kW - Filter power consumption 4 kW - Cooler power consumption 10+1 kW - Resonator power consumption 7 kW Mild steel Sheet thickness max. 12 mm - Stainless steel Sheet thickness max. 6 mm - Aluminum Sheet thickness max. 6 mm - Copper Sheet thickness max. 3 mm - Brass Sheet thickness max. 6 mm Dcsdpfx Acskdnv Te Nog Working range X-axis 3060 mm Working range Y-axis 1530 mm Working range Z-axis 160 mm Sheet size max. 3048 x 1524 mm Sheet weight max. 200 kg/m² - IPG fiber laser resonator opposite - Water recooling unit for laser source and cutting head opposite - Under-table extraction and extraction filter system opposite - with 2-fold shuttle table - Tube laser with 4-jaw chuck and large spindle bore next to the flatbed - Lynettes for Rorlaser on linear guides - with CAD software - with nesting software - with tube laser software very good condition

Condition: new, Year of construction: 2026, OSTERBERGER KSBP 2500 Universal Brand new combined universal long-belt sander - brushing machine - polishing machine in portal construction. Sanding length and width can be customized according to customer requirements, also available with two sanding belts in parallel for two workstations, allowing for pre-sanding and finishing without changing the belt, as well as a brush and polishing head with automatic longitudinal adjustment to the left and right. The machine is suitable for coarse and fine sanding, structuring (brushing), polishing, and high-gloss polishing of a wide variety of surfaces including painted workpieces, natural workpieces, and various metal sheets made of stainless steel, aluminum, brass, copper, bronze, and various plastics. Combined long-belt sanding machine with brushing and polishing unit for workpieces up to 650 mm in height: Dsdpfoy Afu Eox Ac Necg - Motorized movement of the brushing and polishing unit from left to right and back - Manual movement of the support table forwards and backwards - Motorized adjustment of the support table up and down Worktable size: 2,500 x 1,000 mm (other sizes available upon request) Sanding belt dimensions: 8,200 mm x 150 mm Drive power of brushing and polishing unit: 3 kW Drive power of sanding belt unit: 3 kW Dimensions approx. 4,200 x 1,600 x H 2,100 mm Weight approx. 1,000 kg

Year of construction: 2016, condition: used, The metal separator, 3 units, from Sesotec, is available for sale. Our GF metal detectors for pneumatic applications provide optimal protection against production downtime, stoppages, and customer complaints. Dedpfx Acoyrl Nys Necg Suitable for steel, copper, non-ferrous metals, and stainless steel.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,400 mm, total width: 1,600 mm, total length: 1,500 mm, table width: 500 mm, type of input current: three-phase, distance table to quill: 550 mm, workpiece length (max.): 800 mm, workpiece width (max.): 480 mm, workpiece height (max.): 250 mm, control cabinet length: 880 mm, control cabinet width: 700 mm, control cabinet height: 1,860 mm, input voltage: 400 V, overall weight: 1,240 kg, tank capacity: 280 l, Equipment: documentation/manual, Sinker EDM Machine CM323Z Technical Data Maximum table travel (X x Y): 300 x 200 mm Maximum head travel (Z): 300 mm Orbital movement (deflection) U-V travel: ± 5 mm Distance head/table: 250 to 550 mm Table size: 500 x 350 mm Maximum workpiece weight: 500 kg Work tank dimensions: 820 x 500 x 300 mm Dielectric tank volume: 280 l Maximum electrode weight: 15 kg Smooth linear guides Glass scale encoders on all 3 axes Required space (W x D x H): approx. 1600 x 1500 x 2400 mm Weight: 1000 kg Generator / Power Supply Unit 75 EZ Technical Data Maximum machining current: 75 A Power consumption: 5 kVA Maximum possible feed rate: 550 mm³/min Achievable surface finish: 0.45 µm/Ra Electrode wear rate: 0.2 % Dcedpfxey A If To Ac Neg Required space (W x D x H): approx. 700 x 880 x 1860 mm Weight: 240 kg Additional options included: Orbital and Z-axis deflection system – CNC controlled. Programmable Z-axis allows for both roughing and finishing in a single operation; thread eroding is also possible. Fire extinguisher Permanent magnetic chuck 150 x 300 mm Rapid tank filling system Safety switch for tank door Manual quick-change chuck Included accessories: Quick-change system with approx. 20 electrode holders Electrode materials: copper and graphite Drill chuck, collets Tool cabinet Dielectric fluid Operator training at our facility in 1110 Vienna included The machine has rarely been used (1,083 operating hours) and is therefore in very good condition, and can be demonstrated under power. Inspection possible during our business hours or by appointment. Sale due to upcoming retirement.

Condition: new, Year of construction: 2026, CORMAK MSM250 Belt and Disc Sander with Stand – A Professional Machine for Multiple Applications The CORMAK MSM250 multifunctional belt and disc sander is a modern and efficient combination sanding machine designed for industrial, workshop, and woodworking use. By combining both belt and disc sanding functions, this unit offers maximum flexibility and efficiency when working with metal, wood, and plastics. Equipped with high-quality NSK bearings, this sander operates extremely quietly, smoothly, and reliably over long periods. This sets it apart from the competition and ensures professional-grade performance. The belt sander with stand features a balanced rotor supported by ball bearings and a powerful motor with copper windings, delivering high torque – essential for intensive sanding tasks. An integrated 38 mm dust extraction port allows easy connection to a dust collection system, improving both comfort and safety during operation. Additionally, the CORMAK MSM250 disc sander with stand is equipped with an adjustable work rest and an IP54 protection rating – ensuring precision and operator safety. If you're looking for a reliable bench sander with universal application, the MSM250 model will meet the expectations of even the most demanding users. Key Features: Combination belt and disc sander – maximum functionality Industrial-grade NSK bearings – quiet operation and high durability Suitable for sanding metal, wood, and plastics – versatile applications Copper-wound motor – reliability and performance 38 mm dust extraction port – clean and safe workspace Stable stand – user comfort and ergonomic design Technical Specifications: Specification Value Disc size 250 x 32 mm Disc bore diameter 32 mm Disc grit K 40 Belt size 1020 x 75 mm Belt grit P 80 Rotational speed 2960 rpm Motor power (S1 continuous duty) 0.9 kW Motor power (S6 intermittent) 1.5 kW Voltage 400 V Dimensions 570 x 310 x 1410 mm Weight 32.5 kg Dodpsxfgw Refx Ac Necg S1 – Motor power for continuous operation under full load S6 – Motor power for intermittent operation with idle periods up to 40%

Condition: used, Year of construction: 1999, Overview The micro brewery was manufactured in 1999 by theGerman manufacturer BERAPLAN. All equipment is in good condition. A new wort copper was added in 2018.  List of equipment: 1. Mash Tun Made by Beraplan in 1999 Cylindric shape with conical ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1600 mm Height conical part: 20 0mm Volume: maximum 38 Hl Double sidewall Insulation Heated by steam, which can be regulated Hot and cold water inlet at the bottom Can be emptied through the bottom 4 CIP balls PT100 2 agitators Mach pump with variable speed drive 2. Lauter Tun Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1200 mm Volume: maximum 37 Hl Filtering ground with trapezoidal perforations High precision valve to regulate the flow rate Hot and cold water inlet at the bottom 4 CIP balls PT100 3. Wort Copper Made by FRACCHIOLLA in 2018 Heated by steam Cleanning balls Temperature sensor Transfer pump from Alfa Laval Solid C-2 (3 kW) 4. Whirlpool Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1250 mm Volume: maximum 40 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (2,2 kW) 5. Hot Water Tank Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 2700 mm Volume: maximum 85 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (7,5 kW) Heated by steam with temperature regulation 6. Heat Exchanger Made by MDC (France) Plate heat exchanger double zone model: RDC 307 Capacity: 30 Hl/h from 85°C to 16°C 7. Ice Water Unit Capacity: 1000 l New pump Dodpfjl Hxmdex Ac Nscg

Condition: used, Year of construction: 1998, Overview  This all-copper brewhouse of type CBS-15 was manufactured by the German manufacturer Wachsmann in 1998 and first put into operation in 1999/2000. It is currently in storage in Bavaria and has recently been professionally overhauled - including new controls and motors. The system is available immediately. The brewhouse is being sold at a much more attractive price than previously invested. Originally, a recommissioning was planned as part of our own brewing project, but this could not be realized due to the lack of a building permit. Technical details  Design: all-copper brewhouse incl. copper-clad smoke pipe and dummy extractor hood Hot wort: 17 hl Pouring: approx. 270 kg Commissioning: 1999/2000 Floor space: approx. 5.25 × 1.80 m (with control cabinet: 2.25 m) Recommended room height: min. 4.2 m Weight (empty): approx. 4,000 kg Control system: renewed after 2017 Dcodow Afhfjpfx Ac Nog

Year of construction: 2025, operating hours: 1 h, condition: new, functionality: fully functional, nominal power: 5.5 kW (7.48 HP), pipe diameter (max.): 1,600 mm, rotational speed (distance/time): 36,000 mm/min, sheet thickness (max.): 2 mm, sheet thickness copper (max.): 1 mm, sheet thickness steel (max.): 1 mm, sheet thickness stainless steel (max.): 1 mm, Equipment: emergency stop, scorer, HVAC – Spiral duct forming machine (SPIRO) for sheet metal, length 120–8000 mm, strip width 137 mm, sheet thickness: galvanized 0.4–1.2 mm / stainless steel 0.4–0.8 mm / aluminium 0.5–1.5 mm / copper 0.5–1.2 mm, speed 1–36 m/min, PLC, cutting with saw blade (4 kW), main drive 5.5 kW. Dcsdpfx Acsykpb Rj Neg This machine is the heart of production: it feeds the strip and outputs spiral ducts at high speed. Spiro duct diameter 80–1600 mm. Includes spare guide rollers and strip bars for various duct diameters. More information available on our website. Pictured in transport configuration.

Condition: excellent (used), Schechtl HBM 310 Dcjdpfsymz Rijx Ac Neg The machine is equipped with: -a foot pedal -10 mm insert rail -a sheet metal support table (optionally also a back gauge) -Capacity: 1.0 mm steel sheet (1.50 mm aluminium, 1.25 mm copper, and 2.50 mm zinc) -Working length: 3100 mm -Weight: approx. 1,480 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 966 h, MAZAK OPTIPLEX NEXUS 3015 FIBER - 4 kW CNC Fiber Laser Cutting Machine Price: EUR 190,000 net Condition: Used – VERY LOW OPERATING HOURS Resonator: IPG YLS-4000 U VERY LOW WORKING HOURS The machine has exceptionally low operating hours. The IPG resonator and critical components are in near-factory condition: - Practically full remaining lifespan of the IPG resonator (rated for up to 100,000 h) - Minimal wear on the optical system, Multi-Control Torch 2.1 head, and linear guideways - Cutting quality and precision comparable to a new machine - Operating hours confirmed by CNC readout – documentation available upon request or during inspection TECHNICAL SPECIFICATIONS Model: Optiplex Nexus 3015 Fiber Laser Type: Ytterbium fiber laser Resonator: IPG YLS-4000 U Laser Power: 4.0 kW Max. Sheet Size: 1,525 x 3,050 mm Max. Pallet Load: 930 kg Travel (X/Y/Z): 3,100 / 1,580 / 150 mm Rapid Traverse (X/Y): 60 m/min (85 m/min combined) Drive X1/X2/Y: Rack & pinion, direct-drive Drive Z: Servo, ball screw Accuracy X/Y: ±0.05 mm / 500 mm Repeatability: ±0.03 mm Head: Multi-Control Torch 2.1, F125-F200 mm Assist Gases: O2, air, third gas; 0.02–2.5 MPa CNC: Mazatrol Preview G, 19" touchscreen Pallet Changer: Automated, 2-pallet Weight: Approx. 12,850 kg Power: 380–480 V, max. 18 kW CUTTING CAPACITY (4 kW) Mild steel O2: 20 mm Mild steel N2: 4 mm Stainless steel N2: 15 mm Aluminum N2: 15 mm Copper O2: 8 mm Brass N2: 8 mm INTELLIGENT FUNCTIONS (INCLUDED) Automatic nozzle changer (8 nozzles), auto focus positioning, focus detection, auto profiler calibration, auto nozzle cleaning, beam diameter control, pierce/plasma/burn detection, fine power ramping, flash cut. SCOPE OF DELIVERY (INCLUDED IN PRICE) Dcsdpfxey Dgxue Ac Neg Cast-iron frame (foundation-free installation), Mazatrol Preview G CNC 19", Multi-Control Torch 2.1 head with 8-position nozzle changer, OPTIPOD module, automatic 2-pallet changer, chiller with 6 m hoses, cutting nozzles 1.2/2.0/3.0 mm plus 5 adapters, laser edge detection, numerical gas pressure control, multi-tap transformer, slatted table (100 mm spacing), tools, documentation (PL/EN). OPTIONAL EQUIPMENT – NOT INCLUDED The laser system can be purchased separately for EUR 190,000. Options below are available at additional cost. OPTION A – PRESSURE-BOOSTING UNIT – EUR 15,000 net Allows cutting with compressed atmospheric air instead of expensive nitrogen, greatly reducing operating costs. Components: 1. Compressor SK 25 / max. 15 bar / SK.2-13318 2. Condensate Drain Ultramat UFM-D03 3. Economizer Ultra-Filter DF 0035 - DF 1100 4. Ultra-Filter DF 0035 - DF 1100 5. Pressure vessel, 500 l Air cutting capacity: mild steel up to 6 mm, stainless up to 4 mm. OPTION B – SHEET LOADING CRANE – EUR 5,500 net Sheet loading crane, lifting capacity up to 700 kg. Enables safe and quick loading of sheets onto the laser pallet. PRICE SUMMARY (NET, EUR) Machine only: EUR 190,000 Option A (pressure unit): EUR 15,000 Option B (loading crane): EUR 5,500 Total with both options: EUR 210,500 COMMERCIAL TERMS - All prices are net, in EUR (VAT not included) - Offer valid for 30 days - Payment and delivery terms to be agreed - Inspection and test cutting available by appointment

Year of construction: 2021, condition: ready for operation (used), A laser cross-welding system is offered. Fiber laser 1500W water-cooled, cooling unit integrated, pallet truck guide, shielding gas supply, weld seam pressing device, remote access RMACC01 SECOMEA, strip width max.: 110mm, strip material: steel: 0.25mm-3.0mm, C steel: 0.25mm-2.5mm, aluminum: 0.25mm-2.5mm, copper: 0.20mm-1.2mm, dimensions W/H/L: 650mm/2054mm/1050mm, weight: approx. 650kg. Inspection possible by appointment. Dcsdeyugl Uspfx Ac Nsg

Condition: used, This listing is for a Shell Lab SC05A-2 CO2 Series CO2 Incubator. The unit is in full working condition and is ready for immediate release. The Shell Lab SC05A-2 CO2 Incubator is expertly designed to meet the stringent requirements for sensitive tissue and cell culture applications. Here’s a concise look at its key features and specifications: Key Features: Fast CO2 Recovery: The infrared (IR) CO2 sensor swiftly restores CO2 levels after door openings, essential for maintaining pH stability in cell cultures. Exceptional Temperature Uniformity: With a unique air jacket design, it delivers outstanding temperature uniformity of ±0.25°C at 37°C, crucial for consistent incubation conditions. Humidity Control: Maintains humidity levels through evaporation, allowing for up to 95% relative humidity—perfect for sensitive cultures that require a moist environment. Advanced Contamination Control: Patented Copper-Caged HEPA Filter: Enhances air quality by trapping contaminants while utilizing copper's antimicrobial properties. Heated Door: Reduces potential condensation on the inner glass, maintaining temperature integrity. Dsdoxxygxepfx Ac Nscg Heated Copper CO2 Inlet: Prevents moisture from entering the chamber, further safeguarding culture conditions. Durable & Easy to Clean: The stainless steel interior ensures longevity and simplifies maintenance, while the autoclavable shelving provides additional sanitation options. Data Logging Capabilities: Enables tracking of environmental conditions for compliance and research documentation. Technical Specifications: Model: SCO5A Part ID: SCO5A Exterior Dimensions: 27.5" W × 28.5" D × 37.8" H (699 mm × 724 mm × 960 mm) Interior Dimensions: 20.5" W × 19.8" D × 21.5" H (521 mm × 503 mm × 546 mm) Volume: 5.0 . (142 L) Shelf Dimensions: 19.1" W × 17.8" D (485 mm × 251 mm) Unit Weight: 200 lbs (91 kg) Interior Metal: 300 Series Stainless Steel Exterior Metal: Painted Cold Roll Steel Operating Temperature Range: Ambient +5°C to 60°C Temperature Uniformity (Midrange): ±0.25 °C Temperature Stability (Midrange): ±0.1 °C Controller Type: Digital Display Resolution: 0.1 °C Power Requirements: 110-120 VAC, 50/60 Hz, 6.0 Amps Safety Certifications: UL 61010-1, EN 61010-1, CSA 61010-1, CE