Used Corn Chopper for sale (264)

Condition: ready for operation (used), functionality: fully functional, loading space width: 1,400 mm, loading space length: 2,900 mm, total length: 6,600 mm, total width: 2,150 mm, total height: 2,550 mm, TECHNICAL DETAILS Loading area length: 2,900 mm Loading area width: 1,400 mm Cutting shaft: 1 MACHINE DETAILS Crodsxw U Hqjpfx Ab Deg Total installed power: 48 kW Cutting shaft motor power: 37 kW Dimensions (L x W x H): 6,600 x 2,150 x 2,550 mm

Condition: new, Year of construction: 2023, Corner crimping machine FOM INDUSTRIE BAIHA L Machine in stock - Max. profile height 200 mm - Hydro-pneumatic drive - Three pneumatic clamps - Min/max height of blade position from 0 to 180 mm - Kit for profile support - Digital counters for profile positioning - No. 2 right tool-holder - No. 2 left tool-holder - No. 2 knives 2 mm thickness - No. 4 tools 5 mm thickness - No. 2 fold-away profile fences Credjd E Eimepfx Ab Dsg

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Crodpox R D Efjfx Ab Dsg Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Crjdjv Ivnzepfx Ab Deg Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Csdpfx Ajv Ivn Usb Dsrg Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: new, Year of construction: 2021, Exhibition machine Year of manufacture: 2021 (Table machine) For stationary profiling of head edges on soft-forming and post-forming workpieces. Also for edge trimming on thick PVC edges with right-angled workpieces and multi-sided gluing. The processing of symmetrical and asymmetrical soft-forming and post-forming profiles is possible after manual profile depth adjustment. The motor feed is performed manually by sensing the workpiece. Basic equipment: - Workpiece stop system - Pneumatic clamping cylinder - 1 milling motor, 0.8 kW, steplessly adjustable up to 27,000 rpm, standardly equipped with radius cutter R=2. Sensing is performed by a guide ring on the workpiece. - Aggregate guidance on precision linear guides. Credpfxskwhape Ab Dsg Technical data: Workpiece thickness: max. 55 mm Workpiece width: min. 80 mm Workpiece length: min. 110 mm Soft-forming profile depth: max. 50 mm Edge thickness: max. 4 mm (depending on the edge material) Milling tool: Radius cutter R 2 Electrical connection: 230V / 50Hz / 1 phase Total connection: 0.8 kW Pneumatic connection: 6 bar Space requirement: approx. 740 x 460 x 500 mm Net weight: approx. 45 kg Availability: short-term Location: Solingen

Condition: used, Year of construction: 2023, functionality: fully functional, OMEGA ALLPRO 90 (2023 model) - FOLDERF-GLUER - Microbox device - Servo motors on the feeder and stacker - Remote control - Left and right-hand side-register sections - Retractable center carrier in the final folding section - Third carrier in PF1 and PF2 Credpfx Aszlqzgeb Dog - Camera at the feeder to monitor the delivery section entry - Motorized carriers with positioning readout - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Air-assisted folding system for crash-lock bottoms - Safety pull-cords - ERO cold glue system (3 guns + side glue wheel with reservoir)

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range +5°C - +45°C for temperature testing Test chamber volume approx. 1300 l Crjdpfovz U Ersx Ab Deg Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range +5°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Omega 130 folder-gluer - 4- 6- corner - ALLPRO 130 (2016 model) - Camera at the feeder to monitor the entry to the delivery section - Vacuum feeder - Servo-driven feeder - Left and right side-register sections - Remote control - Motorized transport belts - Motorized upper carriers for heavy materials - Electronic servo system for 4- and 6-corner boxes Crjdpfx Abozlqwzj Djg - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Safety pull-cords - LAMBERTONI hot-melt gluing system (2 guns) + side disc with cold glue pot - Option to install a ZATOR cold-glue system (4 guns) without pump and encoder

Condition: ready for operation (used), Year of construction: 2018, overall weight: 2,722 kg, controller manufacturer: MITSUBISHI, controller model: M800, number of axes: 5, This 5-axis Mitsubishi MV1200R was manufactured in 2018 and features advanced capabilities such as X-Axis Travel of 15.7", Y-Axis Travel of 11.8", and Z-Axis Travel of 8.7". It includes a Mitsubishi M800 control, Auto Wire Threading, and a Chiller for enhanced performance. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200R machine we have for sale. Contact us for more information about this machine. Additional Equipment • Auto Wire Threading • Chiller • Remote 360 Installed • Round Diamond Guides Included • 1GB Partition • Wire Chopper • Angle Master Advanced Tapering • Angle Master Precision Taper Software • CFAST Compact Flash Card • Chiller Chopper • DNC Hardware Ethernet FTP • FS Power Supply • High Precision Alignment Gauge • Wire Alignment Gauge Included Csdpox D Ryyjfx Ab Djrg Machine Benefits Technical machine benefits: • X-Axis Travel: 15.7" • Y-Axis Travel: 11.8" • Z-Axis Travel: 8.7" • U/V Axis Travel: 2.4" x 2.4" • Degree Taper Cutting: 15 @ 8" • Glass Scale Feedback: X, Y, U, V • Workpiece • Precision: .000002" • Table • Inside Tank Dimensions: 31.9" x 27.6"

Condition: used, machine/vehicle number: 711065, Eckenrundstossmaschine / Corner Rounding Machine Krause Y6R Codpfx Aboiq Tlvs Derg Serial No. 711065/031 Tisch Modell / Table model Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Credjv Ivn Ispfx Ab Deg Weight approx. 480 kg + 130 kg lighting module

Condition: used, Hydropneumatic operation Max. punching height: 90 mm Abutment stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Codpfx Abow Inude Dsrg Max. profile height: 100 mm Weight: approx. 280 kg

Year of construction: 2016, operating hours: 50 h, condition: like new (used), functionality: fully functional, Impiantinox Easybräu SCB 500 brewing system Crodsq H Azzepfx Ab Djg consisting of mash/boiling kettle, lauter tun, hot water tank Agitator in the mash tun Chopper in the lauter tun Electrically or steam heated Electrical connection 40 kW Steam condenser in the boiling kettle Brewing volume from 3.5- 7 HL Complete internal piping with pumps, electric heating Heat exchanger for wort cooling Wort aerator

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 41/640, clamping force: 250 kN, Four-point injection molding machine, Rutil MP4 model, with a platen size of 260 x 240 mm and a clamping force of 25 tons. The machine is in working condition. Cjdpfx Abeyb Rn Te Dorg

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 30617 0494, grinding length: 1,500 mm, grinding width: 500 mm, total height: 2,550 mm, total length: 6,150 mm, total width: 3,900 mm, grinding height: 400 mm, feed rate X-axis: 25 m/min, -WR 110- Here, we offer a used Elb Schliff Brilliant B15 Unicorn. Technical data: Grinding area: 1500 x 500 x 400 mm Grinding wheel: 400 x 100 x 127 mm Year of manufacture: 1994 Grinding spindle: 15 kW, 1500 – 3500 RPM Table feed (X): hydraulic, 1 – 25 m/min Crsdpeznclvefx Ab Dsg Machine main dimensions: L 6,150 x W 3,900 x H 2,550 mm Weight: 6,700 kg Magnetic table: 1500 x 500 mm Other/Features: - V- and flat guide - Feeds perpendicular (Y) and transverse (Z) - via AC motor and ball screw - Linear guides - Incremental glass scales for the Y-axis - Incremental rotary encoders for the Z and X axes The machine is located in an external warehouse near Solingen. An inspection under power can be arranged until July 31, 2026.

Condition: used, Kompleksowo przetestowany, używany mieszalnik lemieszowy produkcji Winkworth (Anglia) model RT400 wykonany ze stali kwasoodpornej AISI 316. Materiał: stal kwasoodpornej AISI 316 Pojemność robocza: 400 litrów (w zależności od produktu) Wymiary komory mieszającej: długość 1300 mm x średnica 800 mm Typ rozładunku: zawór klapowy pneumatyczny, umieszczony centralnie na spodzie Mieszadło: szybkoobrotowy wał z przyspawanymi łopatami w kształcie "T" Silnik: napęd produkcji SEW z silnikiem elektrycznym o mocy 22 kW Dodatkowe wyposażenie: - 1 boczne mieszadło intensywne (chopper - Refiner) napędzane bezpośrednio silnikiem elektrycznym o mocy 7,5 kW, możliwość podłączenia drugiego mieszadła Poniżej dostępny jest link do filmu ukazujący mieszalnik podczas testowego uruchomienia: Specifications: Bowl Volume: 105.7 gal Motor Power: 22 kW Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Codpfeykn Shjx Ab Djrg Horsepower Of Choppers: 10.057 Vacuum Internal (Y/N): N Jacket (Y/N): N Dimensions: 1300mm Long x 800mm Diameter

Condition: excellent (used), functionality: fully functional, VEMAG HP30E | Vacuum filler with chopper and loading system Manufacturer: VEMAG Maschinenbau GmbH Credeziqr Topfx Ab Djg Model / Type: HP30E Power supply: 400 V / 50-60 Hz / 3 phases Hopper capacity: 350 liters Filling capacity: Up to 8700 kg/h Portioning range: From 1 to 99,999 g Portioning speed: Over 600 portions/min The VEMAG HP30E is one of the most powerful and reliable vacuum fillers in the industrial class, designed for continuous, high-performance operation in large meat processing plants, slaughterhouses, delicatessen facilities, and large-scale catering operations. Thanks to the use of a unique dual auger technology (VEMAG Duo-Drive), the raw material is handled extremely gently, which eliminates stress on the meat structure and guarantees a perfect, clear cross-sectional appearance of the finished product. A key advantage of this unit is its integration with a filling chopper. This system allows for simultaneous final comminution of the product to the desired granulation and removal of hard particles (tendons, cartilage) just before the portioning process. The machine performs excellently not only in the production of raw, scalded, or baked sausages, but also in the precise dispensing of meat mixtures, pet food, and other thick food products directly into packaging lines or clipping machines.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 37,021 h, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, total height: 2,220 mm, total width: 2,400 mm, wire diameter (max.): 0.33 mm, overall weight: 4,400 kg, controller manufacturer: AGIE, controller model: Software version 07.08.01., product length (max.): 2,800 mm, number of axes: 3, wire diameter (min.): 0.07 mm, This AGIE Agiecut VERTEX 3 Erosion machine was manufactured in the year 2006 in Switzerland and has 37021 erosion hours. It is equipped with an Agievision 5 Software version 07.08.01 control unit. • Control: Agievision 5 (software version 07.08.01) • Condition: Excellent; regular maintenance; major service recently completed; fully operational; can be tested under power • EDM operating hours: approx. 37,021 h • Travels (U/V): ±70 / 70 mm • Distance for clamping: 1,100 mm • Max workpiece dimensions: 1050 × 650 × 250 mm • Max workpiece weight: submerged 400 kg / non-submerged 800 kg • Max cutting height: up to 250 mm • Taper capability: ±30° / 100 mm • Positioning • Max manual speed: 2 m/min • Max programmable speed: 3 m/min • Resolution: 0.0001 mm • Geometric tolerances: per manufacturer specifications • Wire system • Wire diameter range: 0.07–0.33 mm (standard 0.20 mm) • Wire spool capacity: up to 25 kg • Wire tension: 0–25 N • Wire speed: 60–300 mm/s • Wire feed: semi-automatic • Wire disposal: chopper system • Equipment & features Crsdpfx Aoy D N I Esb Deg • Automatic wire threading system • Threading nozzles: 2 mm (optional 1 mm / 0.6 mm) • Combined wire guide system and cylindrical wire guide • Electronic handwheel (manual control) • Remote control with LCD display • TFT control screen (1024 × 768) • Keyboard and mouse control Dimensions Machine Depth 2800 mm

Condition: used, machine/vehicle number: 246292, Eckenrundstossmaschine - Corner Rounding Machine Polygraph Y6RSerial-No. 246292 Gerdes Messer / Straight Knife Stapelhöhe max. 55mm Crjdpfx Aeh Axdweb Deg Hub 65mm Handhebel / Table model Manual Operation Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 294203, Eckenrundstossmaschine - Corner Rounding Machine Kolbus EHSerial-No. 294203 Rundes Messer Nr. 11 / Round Knife No. 11 Stapelhöhe max. 55mm Hub 65mm Handhebel / Table model Manual Operation Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Credpfoh Axdtjx Ab Djg Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 19632, Eldan Super Chopper SC1412T for tyres, cable, wood, plastic or waste Credpfxel Tn Uis Ab Djg Hägglunds NB 400 S N 02 12 heavy duty frame vibrating extractor hopper cabinet very clean machine

Condition: excellent (used), Complete PVC Line – Automatic Double Head Welding Machine URBAN AKS 3900 + Automatic PVC Corner Cleaning Machine URBAN SV 305 – Year 2006 Professional URBAN production line composed of Automatic Double Head Welding Machine AKS 3900 and Automatic Corner Cleaning Machine SV 305, ideal for the production of PVC windows and doors. --> Automatic Double Head Welding Machine – URBAN AKS 3900 Year: 2006 Automatic 2-head welding machine – URBAN AKS 3900 Professional automatic welding machine designed for high-precision welding of PVC profiles with angle processing from 30° to 180°. The machine guarantees precise welds with weld bead limitation and excellent operational reliability. Thanks to the automatic head positioning system and fully adjustable working parameters, it allows fast and efficient production cycles. Main features No. 2 automatic welding heads Angular welding from 30° to 180° Automatic head positioning system Electronic temperature adjustment Welding time and pressure control Two-hand safety control system Adjustable profile supports Independent thermostatic controllers Controlled heating elements CE-compliant safety devices User manual available Working capacity Profile height: 30 – 130 mm Maximum profile width: 140 mm Useful welding length: 440 – 2500 mm Production capacity: approx. 200 welds / 8 hours Technical data Installed power: 3 kW Power supply: 230/400 V – 50/60 Hz Operating pressure: 8 bar Air consumption: approx. 36 l/cycle Weight: approx. 550 kg Csdpfxsy R Tvye Ab Dsrg Noise level: 67 dB(A) --> Automatic PVC Corner Cleaning Machine – URBAN SV 305 Year: 2006 Automatic PVC Corner Cleaning Machine – URBAN SV 305 Automatic machine designed for cleaning and finishing welding seams on PVC windows, doors and profiles. The URBAN SV 305 allows complete processing of welded profiles, including cleaning of surfaces, external corners, internal grooves and gasket slots, also on acrylic-coated profiles. Thanks to the automatic profile recognition system and intuitive SPS control, the machine ensures high precision and easy operation. Main operations Cleaning of upper and lower welding seams External corner milling with carbide cutters Cleaning of upper and lower internal grooves Processing of internal and external gaskets Drilling of gasket grooves Inclined chamfers Equipment Tool turret for 3 cutter units Cleaning knives Adjustable milling unit Upper and lower drilling unit Adjustable pneumatic system SPS operator control panel Soft-start system and electronic motor brake User manual available Working capacity Profile height: 30 – 150 mm Profile width: 40 – 145 mm Minimum window dimension: approx. 210 mm Technical data Spindle/milling speed: 2800 rpm Installed power: 1.7 / 2 kW Power supply: 230/400 V – 50/60 Hz Operating pressure: 7 – 8 bar Machine weight: approx. 530 – 550 kg Noise level: 78 dB(A) Fully working line, ideal for PVC window and door manufacturers looking for a complete, reliable and ready-to-use production solution.

Condition: used, Year of construction: 2009, functionality: fully functional, 1 Universal Testing Machine Type H 10 KM Used device with Windows 11 software for tensile, compression, and bending tests; comes with one pair of wedge grips up to 10 kN and a certificate for tensile and compression displacement measurement. For testing in tension, compression, shear, bending, etc. • This is a dual-spindle benchtop model. • The machine complies with DIN 51220 and 51221, Class 1. • Digital display for force and displacement, 4½ digits, with peak value memory. • Five-range automatic switching for force and displacement measurements. • Digital speed adjustment from 0.5 to 1000 mm/min in increments of 0.1 mm. • Break detector and automatic return function are standard features. • Driven by a precision servo motor with high-frequency chopper control unit and digital feedback for load-independent, constant speed. • Quiet operation thanks to toothed belt drive and ball screw spindles with bellows cover. • Fully computer-controllable via RS 232 interface. Max. load: 10 kN in tension and compression Max. travel: 1150 mm without grips Force measurement: Strain gauge Measurement principle: Temperature-compensated Displacement measurement: Built-in optical encoder, 0.01 mm resolution Codexghlfopfx Ab Djrg Power supply: 220-250 V, 50-60 Hz Power consumption: 1.0 kW Dimensions: Height 1575 mm, Width 635 mm Clear width of frame: 410 mm Weight: approx. 95 kg Includes: 10 kN load cell and certificate for force and displacement.

Year of construction: 2010, condition: used, Case maker Kolbus DA 270 Year: 2010 For fully automatic production of book cases, files, display cards, calendar backs or game boards. Description: - Automatic setting - Motorised setting - Automatic case counter - Board pre stacking conveyor: 1700 mm - Board cutter: PS - Centre strip infeed (flexible) Csdpfx Abox Ary Es Dsrg - Waste chopper - Cloth feeder: Non-Stop - Glue unit - Preheated glue tube - Viscosity control - Device for inside lining with hotmelt - Device for producing padded cases - Pressing station - Stacking delivery Max. mechanical speed: up to 65 cycles/min Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 140 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!