Used Counterweight for sale (151)

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 31 h, 3D Coordinate CNC measuring device Profitech Innometrik Advanced in gantry design (demo unit at a special price) Open Cable Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Nsdpfsdyah Sex Adcswk Passive vibration isolation pads Technical specifications Measurement paths: X: 500mm Y: 600mm Z: 400mm Max workpiece weight: 250kg Weight of the machine: 850kg Dimensions over everything: 1290x1160x2350mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.2μm Volumetric length measurement deviation: MPEE = 2.2+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 90NI / min Also configurable as a complete package with touch probe, software commissioning and training. (Annual maintenance & calibration can also be offered)

Condition: used, functionality: fully functional, Floating grabber excavator plant, complete with floating conveyor belt Manufacturer: Rohr Bagger GmbH Type: RS 8.0/280-G Base year of construction: 1992 Grabber capacity: 8 m³ Crawler undercarriage with lifting mechanism and counterweights Hydraulic grabber Raking grate with oversized material slide Oscillating feeder Dewatering screen, Svedala, year of construction 1998, type H2PP 6000 x 2500 Nwodpfx Ajzkmmvjdcek Excavator discharge conveyor, Bleichert Rohr, year of construction 1996, type TRV 9.1/1000 Transformer station Schneider, year of construction 1996, type TS 61440, 800 kVA Floating conveyor belt system Year of construction: 1992 Total length approx. 250 m, belt width 800 mm Barge / oversized material barge, year of construction 2005, 15 m x 5 m x 2.75 m, loading volume 40 m³, approx. 45 t.

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 3,715 h, machine/vehicle number: S4513-18437, power: 35.8 kW (48.67 HP), load capacity: 227 kg, mast type: free lift with telescopic boom, lifting height: 13,720 mm, platform length: 2,440 mm, platform width: 910 mm, overall weight: 7,037 kg, empty load weight: 6,811 kg, transport length: 8,480 mm, transport width: 2,300 mm, transport height: 2,490 mm, construction height: 2,490 mm, next inspection (TÜV): 02/2026, fuel type: diesel, fuel tank capacity: 125 l, tire condition: 80 %, Equipment: all wheel drive, Genie S45 Telescopic Boom Lift Swing arm, diesel, 4x4, 16 m Technical Features Chassis and Engine Engine: Deutz D2011L03i: air/oil-cooled 3-cylinder diesel engine Fuel tank capacity: 125 l Power: 35.8 kW Travel speed: 1.1 km/h (working) - 7.1 km/h (road) Gradeability: 40% Tilt angle: 4.5° Turning radius (inside/outside): 2 m / 4.78 m Nwedpjza Tu Hsfx Adcok Dimensions and Performance Overall dimensions (L x W x H): 8.48 x 2.3 x 2.49 m Platform dimensions (L x W): 2.44 x 0.91 m Empty weight: 6,811 kg Max. outreach of the turntable counterweight: 0.86 m Lifting structure and performance Platform load: 227 kg / number of people: 2 Platform height / working height: 13.72 m / 15.72 m Maximum outreach: 11.18 m Swing arm inclination: 135 ° Negative height: -1.5 m Turret rotation: 360 ° Platform rotation: 160° Allowable lateral force: 400 N Max. wind speed: 12.5 m/s Equipment Active swing axle Telescopic swing arm Non-marking tires Safety Tilt limiter with tilt interlock Overload limiter with overload interlock Electric emergency pump for emergency lowering Reversing warning The telescopic boom lift shows signs of use, but is in perfect technical condition. Despite our best efforts, errors in the advertisement cannot be ruled out. Vehicle inspection only by telephone appointment. Further details are available by phone at +49 160 99188290

Condition: excellent (used), mileage: 192,459 km, fuel type: diesel, color: orange, lifting height: 37,500 mm, mast type: telescopic, Year of construction: 2008, General Information Year of manufacture: 2008 Drivetrain Drive: Wheel Functional Mast: Telescopic (3 sections) Mast length: 29 m Lifting capacity: 40,000 kg Body brand: GROVE GMK 2035E + jib CE marking: Yes Condition Technical condition: Very good Visual condition: Very good Financial Information Price: On request GROVE GMK 2035E CRANE + JIB DRIVE 4X4X4 COUNTERWEIGHT 6 TON. CHASSIS 192,459 KM AIR CONDITIONING AUTOMATIC TRANSMISSION TYRES 60% GOOD SIZE 385/95/R25 Nwodpfxsuxqgws Adcjk UPPER STRUCTURE AIRCO + HEATING 1 TIMBER BLOCK 1X WINCH MAX LIFTING CAPACITY: 40,000 KG. MIN / MAX BOOM LENGTH 8.9 M / 29 M JIB: 8.5 M CENTRAL LUBRICATION SYSTEM RADIO REMOTE CONTROL SUPERSTRUCTURE ENGINE: MERCEDES-BENZ DRIVING SPEED: 85 KM/H ALL DOCUMENTS AND PAPERS AVAILABLE CE CERTIFICATE FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPANOL

Condition: used, color: red, Year of construction: 1996, operating hours: 14,547 h, Make of engine: HINO EM100 Mast: lattice Mast length: 3.100 cm Lifting capacity: 65.000 kg Delivery terms: EXW Counterweight: 22800 Production country: JP Please contact Christiaan Dekker for more information Hitachi KH230-3 Year: 1996 Nsdpfsyc E R Eex Adcjwk Hours: 14547 65 tons crane 3th winch Winches with free-fall option PAT Kruger lifting computer 31 meter boom( more boom available) CE Hino EM100 engine

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 6,958 h, load capacity: 4,500 kg, lifting height: 3,400 mm, free lift: 160 mm, fuel type: gas, mast type: duplex, construction height: 2,515 mm, fork carriage width: 1,219 mm, fork length: 2,000 mm, empty load weight: 6,368 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,450 mm, opening width: 1,300 mm, LPG forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: normal Front tires type: Super elastic Front tires condition: 60 - 80% Rear tires type: Super elastic Nedpfx Adjyt Tnyjcjwk Rear tires condition: 20 - 40% Description: Machine fully workshop-inspected, cleaned, with new UVV safety check and inspection! Damaged paint areas can be retouched or filled upon request. Fork positioner, 3rd valve, front work lights, front windshield, CE certificate, special build, rotating beacon, wiper, seat, counterweight increase, Monotrol, external foldable restraint system, half-cab.

Condition: used, Year of construction: 2016, operating hours: 6,824 h, Equipment: all wheel drive, * Radio * On-board computer * Rear-view camera * Air-suspended driver's seat * Seat heating * 360-degree warning light, orange Nwedpfxjiikgkj Adcok * Cruise control ---Superstructure: ROPS driver's cabin with heating, engine: Komatsu SAA4D107E-1, 4-cylinder diesel, 90 kW, fully automatic 3-speed transmission, 8-wheel configuration, track width approx. 2,550 mm, dozer blade, hydraulic axle support, counterweight, adjustable boom, 5 additional hydraulic connections at the front, excavator bucket 1,150 mm with teeth. Rear camera and side camera on the right. For sale to commercial customers only. IN THE CASE OF EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION IS WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis of all purchase contracts, invoices, proforma invoices, orders and sales negotiations.

Condition: new, Year of construction: 2025, load capacity: 500 kg, 3-Axis Rotation and Tilting Positioner – 500, 1000, 2000, 3000 kg Load Capacity, Clamping Plate Diameter 0.5, 0.65, 0.8, 1.0 meters HDL 500: - Minimum height: 1000 mm - Maximum height: 1500 mm - Clamping plate diameter: 500 mm - Reach radius: 800 mm (cantilever) - Speed: 0.1 – 1 rpm These positioners have proven themselves in the fields of construction and agricultural machinery, commercial vehicles, industrial trucks, as well as in the aerospace and energy sectors. They are suitable for welding, assembly, machining, and more. With their stable and robust construction, flexible three-axis positioning (including overhead), and easy operation, they facilitate welding, assembly, and handling of large workpieces. - Faster production and increased productivity - Optimal positioning of the workpiece improves welding quality and enables higher deposition rates - Enhanced safety by significantly reducing dangerous crane handling - Simultaneous positioning along up to three axes without cumbersome re-clamping - Easy and ergonomic operation protects and relieves the operator - Flexibility thanks to modular adaptability and custom configurations Basic Principle: Nwjdpfxoulaxbo Adcsk Due to the arrangement of the swivel arm rotation axis above the clamping plate, the arm acts as a counterweight to the workpiece. As a result, these machines are significantly more powerful than tilt rotary tables or tilt-rotational positioners. This principle allows handling of the specified loads in any position. Thanks to the endless rotation of two axes and additional height adjustment, all workpiece positions (including overhead) are possible. Table rotation speed is continuously adjustable from 0.1 to 1.0 rpm; from 2000 kg load capacity, 0.05 to 0.6 rpm. Supplied with wireless remote control. - Rotation range: 360° continuous - Swivel range: 360° continuous - Lift: 1000 – 1500 mm; from 2 tons load capacity: 1250 – 2000 mm - Arm outreach up to 1000 kg: 1 meter; from 2000 kg: 1.5 meters

Condition: used, Year of construction: 2019, operating hours: 10,000 h, Chains D8N, 1-link ground plates, 710 mm U-shaped blade, 4300x1700 mm, with straight cutting edges, capacity 11.8 m3 Rear counterweight Nwedjzk Ahpjpfx Adcjk Please note: The machine offered comes from our rental fleet, therefore the stated operating hours may vary. Location: Welzow

Condition: new, Year of construction: 2017, operating hours: 10,400 h, Transport dimensions (L x W x H): 0 x 0 x 0 ---- Double-pendulum suspension, base plates 710mm, air conditioning, U-shaped sign 4300mm x 1700mm, rear counterweight, Trimble ready Nwsdpjzk Agfefx Adcjk Location: Welzow

Condition: new, Year of construction: 2018, Storage location number: 100325836 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Reach: 62.5m Including counterweight Hoisting mechanism: 45kW 120HC counter-rotating upper carriage Nedpfx Aszkz Nledcowk Full-view cab Including radio remote control with feedback Including undercarriage with 4.6m track width, including spindles and support plates 2x 12.5m tower Including central ballast Location: Nuremberg

Condition: new, Year of construction: 2020, Storage location number: 100285907 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Equipment: Standard equipment: 1b) Standard version with 27.0 m outreach 2c) Radio remote control 2d) Small control panel Nsdpfx Adjzkz Rvocewk 3a) Complete with pyramid-shaped counterweights 7) Collector for continuous rotation 8) MICROMOVE positioning mode 9) Cast ballast with 4 x concrete ballast blocks of 910 kg each Location: Regensburg

Condition: new, Year of construction: 2023, Storage number: 100518723 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Equipment: Hook height 21m Outreach 33m Color: yellow and gray in the new Liebherr design Includes counterweight: 9 plates, each weighing 1530kg Includes slew and trolley travel limiters Includes rear axle adapter Includes transformer, 1.5 kVA Nodezkztqspfx Adcewk Extension cable Location: Passau

Condition: new, Year of construction: 2019, Storage location: 100287504 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Equipment: Hook height 21m Outreach 33m Color: yellow Includes counterweight with 9 plates, each weighing 1530kg Includes slew and trolley travel limiters Includes rear axle adapter Includes transformer 1.5 kVA Extension cable Nwedozkzr Tepfx Adcsk Location: Passau

Condition: new, Year of construction: 2018, Storage number: 100229812 Transport dimensions (L x W x H): 0 x 0 x 0 ---- KUD 120HC Lifting mechanism 37kW EMS display Includes ABB Reach 60m including counterweight Cabin Slip ring housing Nwsdpfxjzkzlye Adcjk Central lubrication system Radio Lighting transformer 4.7kVA Wind speed indicator Cross with 4.6m track width including pyramid and central ballast 2x tower section 12.5m Location: Nuremberg

Condition: new, Year of construction: 2007, Storage location number: 100253758 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Undercarriage with 6m track width including central ballast Tower for 30m hook height Slew radius 60m including counterweight Tower system 200HC/256HC Cabin Nwodpfx Adezkzk Nscek Radio ABB Central lubrication system 45kW hoisting gear Location: Nuremberg

Condition: new, Year of construction: 2007, Storage location number: 100102375 Transport dimensions (L x W x H): 0 x 0 x m, outreach including counterweight Lifting mechanism: 65 kW Power supply cable: 60 m Lighting transformer: 4.7 kVA Radio system: HBC Central lubrication system Assembly platforms Nwedpezkznhefx Adcek Undercarriage: 6.0 m track width Tower sections for 30 m hook height Location: Nuremberg

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, maximum load weight: 13,400 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,750 mm, loading space width: 2,480 mm, total length: 9,925 mm, total width: 2,550 mm, total height: 3,150 mm, suspension: air, tire size: -, tire condition: 100 %, Additional Information Tandem Platform Trailer Type TPS 180, Standard construction with forklift mount Chassis: Central axle trailer Fine-grain steel welded construction Outer frame slightly angled, new design with Load-Lock profile for securing tie-down straps 1 pair of geared support legs at the front, with straight lower part and single-sided operation on the right-hand side Partial wheel arches 2 plastic toolboxes, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock Mount for a carried forklift at the rear, including 2 fork pockets, 2 extendable support tubes, and a mount for chain securing with a locking pin. Underrun protection with light unit that can be folded away. The forklift mount shifts the axles to the rear; please consider load distribution when driving without a forklift. Customer risk! Note! Forklift mount! Carrying a forklift can significantly reduce the vertical load. Counterweight at the front is required! On wet and slippery roads, additional ballast weight or a load at the front of the trailer, weighing at least 2 tons, is necessary; the speed should then be reduced, and the driving style adapted to the road and driving conditions. The forklift must always be secured with chains during transport. The distance between the lift mast and the trailer body should be a maximum of 45 mm, or the vertical forklift tines must rest against the forklift pockets at the end. We assume that the towing vehicle does not have a steering or lift axle, or that the steering axle is always locked or the lift axle is always on the ground. Coupling System: Central axle trailer Drawbar with tested 50 mm drawbar eye, freight forwarding design Lower coupling on the drawbar Nwjdpfx Aendwdhedcjk Folding mount with spring support on the drawbar, for guiding the connecting cables to the truck Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axle/suspension to reduce tire wear and fuel consumption Air suspension with raise and lower valve 1st axle: automatic lift axle with proximity switch, for lift axle Wheels and Tires 385/65R22.5, according to manufacturer's choice Steel rims, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake Vehicle - Driving Stability System Duomatic connection at the front, with connecting cable to the towing vehicle, connection on the right-hand side EBS, Electronic Braking System with EBS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights in LED, side yellow LED lighting, license plate lighting in LED

Condition: used, mileage: 132,360 km, power: 240 kW (326.31 HP), first registration: 11/2008, fuel type: diesel, overall weight: 39,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2027, color: yellow, gearing type: automatic, Year of construction: 2008, Equipment: ABS, crane, electronic stability program (ESP), TADANO FAUN ATF 50 G3 MOBILE CRANE | 40 M TELESCOPIC BOOM | 10 T BALLAST | 6X6X6 VIN: WFN3RUKR382042164 VEHICLE: Faun Tadano ATF 50 G3 Mobile Crane * Year of Manufacture: 2008 * First Registration: 11/2008 * German Registration * Mileage: 132,360 km * Operating Hours: 14,465 h Nwodpozd Iixjfx Adcek * Drive: 6 x 6 x 6 * Tires: 385/95 R25 (14.00 R25) * Remaining Tire Tread: 1. 10/60 % // 2. 80/70 % // 3. 10/20 % * Mercedes-Benz 6-cylinder OM 624 engine * 240 kW / 326 hp * ZF AS Tronic transmission * 12 Forward Gears / 2 Reverse Gears * Central lubrication system for the upper carriage CRANE STRUCTURE: 40 m Telescopic Boom * 5-section main boom * 10 t Counterweight * Load chart available * Outrigger diagram available WEIGHTS: * Total Weight: 39,000 kg * 10t Ballast ACCESSORIES: Complete Documentation * Inspection books * Operating manual * Spare parts drawings * 4 new spare tires * 1 spare wheel on rim * 1 new hoisting rope * 1 used hoisting rope * Extensive spare parts package * Various electrical, mechanical, and hydraulic parts OTHER: From 1st owner * Very good overall condition * Regularly maintained * Last maintenance at 132,326 km / 14,462 operating hours * MOT: 06/2027 * Vehicle Inspection: 12/2026 * Crane Safety Inspection: 05/2027 * Tachograph Inspection: 11/2026 -- We will be happy to assist you with loading and organizing the transport. Contact us! We speak the following languages: German, English and Russian! No liability for printing & typographical errors, changes, prior sale and errors reserved! -- WHO ARE WE? -- Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The special strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! -- OUR SERVICE FOR YOU -- Loading of vehicles We will be happy to help you with loading your purchased vehicles. Organization of special transports We will be happy to help you organize special transports. Day registrations / Export license plates We will be happy to help you obtain export license plates / short-term license plates. Handling of customs formalities We will be happy to help you with handling customs matters.

Condition: new, sheet width 1050 mm plate thickness 2,0 mm distance between columns 1050 mm down holder 1 Stück fence Tisch 80 - 480 mm fence Breiten 0 - 600 mm table-size 1300 x 600 mm work height max. 760 mm total power requirement manuell kW weight of the machine ca. 413 kg. range L-W-H 2,0 x 1,04 x 1,6 m - Including adjustable stop on the work table for miter cuts - The knife can be lifted easily thanks to the counterweight on the back - Large work table for safe placement of the sheet metal plates - Sheets can be pushed through, i.e. longer sheets can be cut - Handwheel on the front to adjust the back gauge - Comes with a robust cast iron base as standard Nwjdpfexabdhox Adcok - Long service life thanks to knives made of quality steel - Standard with hold-down device including quick-release clamp - Robust machine construction for high stability Furnishing: - manual lever shears - stable execution - hold-down bars - Side scale with unit of measurement - Table stop / width stop

Condition: used, Year of construction: 1989, Manufacturer : Rayneri / VMI Model : Ultramix ME 120 RB Type: Stirrer - Mixer on stand Year: 1989 Agitation : rotor stator Motor power: 1.5 kW – 1,500 rpm Speed variation: mechanical Adjustment of the height of the mixing head from the floor: 0–85 cm Length of stirring shaft: 90 cm Up and down: manual with counterweight Nwsdeyzt Uqjpfx Adcsk Leg clearance: max. 70 cm Machine dimensions: W 100 x D 130 x H 230 cm

Condition: new, functionality: fully functional, machine/vehicle number: M30-4, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 5,000 mm, free lift: 1,833 mm, fuel type: diesel, mast type: triplex, construction height: 2,689 mm, fork length: 1,200 mm, empty load weight: 6,000 kg, total length: 4,701 mm, drive type: Diesel, construction width: 1,927 mm, All-terrain forklift Chassis number: M30-4 Fork width: 125 mm Nwsdpfxoy R Hmxs Adcjk Fork thickness: 40 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: New machine Technical condition: New Front tires type: Pneumatic Front tires condition: New Rear tires type: Pneumatic Rear tires condition: New Description: 12-month factory warranty / Maximum 2,000 operating hours 3rd valve, 4th valve, rear work lights, front work lights, fully enclosed cab, full free lift, CE certificate, exterior mirrors, rotating beacon, wiper, LED, seat, - Mast tilt 15° / 12° forward-back - Mast tilt holding valve - Fork carriage with guide rollers, width 1,470 mm FEM 4 - Hydraulic line for distributor - Hydraulic kit function for triplex mast with free lift FLT 50 - Hydraulic kit function for triplex mast with free lift FLT 50 - Hard connection for 3rd and 4th hydraulic circuit - Front tires: Alliance A323 405/70-20, off-road tread - Rear tires: Alliance A317 10.5-18 10PR, off-road tread - Full cab - Differential lock - Mechanically suspended plastic seat - LED front work lights (2x) - LED rear work lights (2x) - Orange LED rotating beacon - Reinforced battery capacity 12V 180Ah 900A - Reversing warning signal in counterweight - CE machine homologation - Easy Link Standard Module

Condition: new, functionality: fully functional, machine/vehicle number: MSI30, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,658 mm, fuel type: diesel, mast type: triplex, construction height: 2,386 mm, power: 37 kW (50.31 HP), fork carriage width: 1,260 mm, fork length: 1,200 mm, empty load weight: 4,400 kg, total length: 3,034 mm, drive type: Diesel, construction width: 1,330 mm, Off-road forklift Chassis number: MSI30 Load centre of gravity: 500 Fork width: 100 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: New device Technical condition: New Front tyres type: Solid rubber Front tyres size: Solideal Camso ED Plus 300-15/18 Front tyres condition: New Rear tyres type: Solid rubber Rear tyres size: Solideal Camso ED Plus 7.00-12/12 Rear tyres condition: New Description: 12 month factory guarantee / Max. 2000 operating hours Nwjdoy R Hmrspfx Adcsk 3rd valve, 4th valve, rear work light, front work light, STVZO, full cabin, full free lift, CE certificate, joystick, rotating beacon, LED, seat, Load suspension Mast tilt valve Street lighting Hi+Vo Halogen Air-suspended fabric seat GRAMMER MSG95 Cyclone pre-filter Raised vertical exhaust on counterweight Lockable diesel tank cap Cross lever 3rd + 4th function Reverse warning signal 3rd + 4th function Hydraulic kit for mast with triplex free lift Fixed connection for the 3rd + 4th hydraulic circuit Increased battery capacity 12V speed increase for hydraulic functions with cross lever Front fender extension metal 1300mm wide

Condition: excellent (used), mileage: 124,471 km, fuel type: diesel, axle configuration: 8x2, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, fog lights, navigation system, parking heater, power mirror, soot filter, spoiler, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Low noise - Speed limiter - Refrigerator - LED lights - Air suspension - Air horn - Particulate filter - Sun visor - Stability control - Auxiliary heater - Toolbox - Power take-off (PTO) - Towing jaw = Additional Information = General information Year of manufacture: 2018 Transmission Gearbox: I-SHIFT, automatic Axle configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Twin wheels Rear axle 2: Lift axle; steered Weights Unladen weight: 30,455 kg Functional Mast: telescopic (14 sections) Mast length: 36 m Lifting capacity: 26,180 kg Lifting height: 3,600 cm Crane: EFFER 1855/8S + JIB 6S HEAVY DUTY, behind the cab Superstructure brand: EFFER 1855/8S + JIB 6S HEAVY DUTY CE marking: yes Condition Technical condition: very good Nwodjyiuq Ijpfx Adcek Visual condition: very good Financial Information Price: Upon request VOLVO FH 650 8X2 TRUCK-TRACTOR COMBINATION WITH EFFER 1855/8S CRANE + JIB 6S HEAVY DUTY + WINCH EURO 6 | PACKAGE 650 HP DRIVE 8X2 LAST AXLE LIFTED AND STEERED 10-TONNE FRONT AXLE WHEELBASE 510 CM AIR SUSPENSION FH SLEEPER CAB WITH FULL EQUIPMENT AIR CONDITIONING, AUXILIARY HEATER, NAVIGATION, FRIDGE, MICROWAVE I-SHIFT AUTOMATIC GEARBOX COMPLETE INNERLINER CHASSIS FROM FACTORY TRACTOR-TRAILER COMBINATION TRUCK ADJUSTABLE FIFTH WHEEL + TRAILER COUPLING MANY TOOLBOXES EFFER 1855/8S CRANE + JIB 6S HEAVY DUTY + WINCH 2X OIL COOLERS FOR CRANE HYDRAULICS TOTAL 14X HYDRAULIC EXTENSIONS + 3 MANUAL MAX WORKING HEIGHT 36 METERS!! MAX LIFTING CAPACITY 21,180 KG MAX LIFTING CAPACITY AT 31.94 METERS 1,640 KG 5th + 6th FUNCTION ON JIB CRANE CAN WORK IN FRONT OF THE CAB USING FRONT OUTRIGGER 5X OUTRIGGERS LARGE HYDRAULIC WINCH WITH HOOK AND ROLLERS RADIO REMOTE CONTROL PREPARED FOR REMOVABLE COUNTERWEIGHT FLATBED FOLLOW US ON INSTAGRAM, FACEBOOK AND TIKTOK TO SEE OUR VIDEOS OF TRUCKS/COMMERCIAL VEHICLES AND MACHINERY FOR SALE WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPANOL

Condition: used, functionality: fully functional, power: 194 kW (263.77 HP), fuel type: diesel, operation weight: 30,620 kg, drive condition: 75 %, Year of construction: 2022, operating hours: 3,656 h, Equipment: UVV, cabin, Hyundai, Crawler Excavator, HX300ANL Nsdszdqrpepfx Adcjwk Year of manufacture: 2022 Operating hours: approx. 3650 ENGINE Cummins B6.7 / STAGE V Engine power: 260 hp (194 kW) at 2200 rpm. HYDRAULIC SYSTEM ELECTRIC POSITIVE FLOW CONTROL (EPFC) 3 Power modes, 2 work modes, user mode Variable power control Pump flow rate control Flow rate control for attachment mode Automatic engine idling Electronic fan control CABIN AND INTERIOR CABIN ACCORDING TO ISO STANDARD Top-mounted windshield wiper Radio/USB player Hands-free mobile phone system with USB 12-V socket (voltage converter 24 VDC to 12 VDC) Electric horn All-weather steel cabin with 360° panoramic view Safety glass, tempered Windshield as a sliding window Sliding glass window (left) Lockable door Heating and cooling box Storage compartment Transparent cabin roof cover Sun visor Door and cabin locks, one key Pre-control pressure-supported joystick Height-adjustable console system AUTOMATIC CLIMATE CONTROL Air conditioning and heating Defroster Cold weather starting aid (intake air preheating) CENTRAL MONITORING 8" LCD display Engine speed indicator or odometer/accelerometer Engine coolant temperature indicator Automatic power boost function Creep/travel mode Automatic idling Overload warning device Connected engine diagnostics Air filter monitoring Eco indicators Fuel level indicator DEF level gauge Hydraulic oil temperature gauge Fuel preheater Clock SEAT Mechanically sprung, heated driver's seat CABIN WITH ROPS ROPS (Roll-Over Protective Structure) ISO 1211 7-2 SAFETY Main battery switch Rear view camera Four work lights front (2 on boom, 2 on front frame) Driving alarm Automatic swing brake Boom holding system Stick holding system Safety valve for boom cylinder with overload warning device Three exterior mirrors OTHER Removable radiator dust screen for cleaning Removable storage container Fuel preheater Fuel prefilter Self-diagnosis system Hi MATE (Remote Management System) Batteries (2 x 12 V × 100 Ah) Double-acting line set (grapple, etc.) Accumulator for lowering attachments UNDERCARRIAGE Lower frame cover (standard) Bottom plates Triple-grouter bottom plates (600 mm) Track roller guides, 2 each Boom 6250 mm Boom safety valves Stick 3050 mm Stick safety valve Counterweight 5100 kg With bucket linkage Upper carriage for mono boom 2-way lines for hydraulic hammer and grapple, proportional Proportional lines for swivel function Lines for quick coupler Long tracks, narrow frame Track chains 600 mm (3-grouter plate) 20 mm 43-link Long track guide Std. lower frame plates Proportional joystick Air-suspended, heated seat SmartKey + Start/Stop button + Auto-Shutdown Radio and USB Rain protection Fuel filling pump Standard paint finish Standard guard rails Work light front on the cabin (LED) Work light rear LED With work light on the boom (LED) All-Around View Monitoring (AAVM) Driving alarm Standard frame Laminated 7 mm window glass Fuel preheater Central lubrication Beka (Europe) Biodegradable oil Panolin - synt 46 Cyclone air prefilter With quick coupler With 1 bucket