Used Counter Bracket for sale (5,745)

Condition: like new (used), Year of construction: 2005, total height: 3,900 mm, total width: 1,700 mm, total length: 7,600 mm, type of input current: three-phase, overall weight: 4,000 kg, For Sale: Neat and in good condition: Brand: Affeldt type of conveyor: Affeldt E350 DG5 type of counter: Affeldt 275 8EV type of packaging machine: Affeldt 773 Hodpfx Ajxztaqeddong includes: conveyor belt + counting machine + vertical packaging machine Suitable for both PE and PP film. dimensions: (L x W x H) 7600 x 1700 x 3900 mm tube diameter: 180 mm weight approx. 4000 KG documentation and electrical diagrams available Year of manufacture: 2005 It has run very little and is complete. It is possible to inspect the machine at our location. If you have any questions or comments, please feel free to contact us. Kind regards, Leo Holland

Condition: used, This listing is for 1 of 2 Handilaz Mini Particle Counter The unit is in full working condition and is ready for immediate use Key Features Simultaneous Particle Counting: Sizes and counts particles in three fixed channels (0.3 µm, 0.5 µm, 5.0 µm) High Sensitivity: Detects particles from 0.2 µm to 10 µm, with resolution down to 10 nm Flow Rate: Consistent 0.1 CFM (2.83 L/min) with quiet pump and internal flow control Power Options: Can be powered via direct supply or portable with four high-capacity, quick-change, rechargeable NiMH AA batteries Data Management: Stores up to 10,000 samples Five distinct sampling modes CSV export via USB or SD card Data output through RS-232C or RS-485 Includes data download software Display & Interface: Touchscreen with one-button operation for ease of use Build Quality & Compliance: Diode laser light source ISO 21501-4 calibrated Hsdpfx Adoxhf Tiodsng Includes IQ/OQ (Installation/Operation Qualification) documentation Extras: Compounding procedure templates provided Applications Cleanroom Certification: ISO 14644-1 certification and re-certification ISO classification for cleanrooms Routine Monitoring: Point-of-use particle measurements Ongoing cleanroom surveillance for compliance Contamination Troubleshooting: Locating local particle sources Verifying filter performance Filter & Leak Testing: Efficient detection of filter leaks and performance validation Compounding: Suitable for pharmaceutical or sterile compounding operations using pre-designed templates

Condition: excellent (used), High Speed Counter 25/500 kHz, PLC control, counter module, counter assembly -Manufacturer: Siemens, Simatic S5 High Speed Counter 25/500 kHz Ovp -Type: 6ES5 385-8MB11 Hsdpjb Nkuhsfx Addjng -Number: 3x High Speed Counter available -Price: per package -Dimensions box: 140/110/H60 mm -Weight: 0.3 kg/piece

Condition: good (used), Included in delivery: 01x holder f. slide-through protection, used material color: sendzimir galvanized total length: approx. 200 mm total width: approx. 80 mm opening dimension: approx. 42 x 37 mm (WxH) for rectangular tube: 40 x 35 mm hole spacing: approx. 50 mm number of drill holes: approx. 2 pieces drill holeØ: approx. 9 mm material thickness: approx. 3,00 mm weight/pc.: 0,320 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: Hnsdpfspbcfgox Addog This item is offered for pickup only. A desired transport or shipment of this or a dispatch of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: used, This listing is for theStuart SC6 Colony Counter The unit is in full working condition and is ready for immediate use The Stuart SC6 Colony Counter is an electronic device designed to streamline and improve accuracy in counting bacterial or fungal colonies on Petri dishes. Here’s what it offers Key Features Pressure-sensitive counting: Place a Petri dish on the built-in pad, tap a colony with a felt-tip pen or probe, and it registers a count on the digital display (0–999), with an optional audible beep Average count facility: You can count multiple plates, and the device automatically calculates averages and standard deviations Adjustable pad sensitivity: Customize the tap sensitivity via a dial to prevent miscounts Viewing options: Features bright, glare-free LED lighting with the option to switch backgrounds (light or dark) to enhance colony visibility Hedpfjxhfyvjx Addong BioCote® antimicrobial coating: The surface is treated with silver-based antimicrobial protection for enhanced hygiene

Condition: good (used), Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 265 by 215 mm, 30 mm high -Drawing: in the photos -Number: 2x counter bearings available -Price: per piece Hnedpfsd Aqtusx Addeg -Dimensions: 390/130/H260 mm -Weight: 30 kg

Condition: good (used), Technical data: Manufacturer: BITO Pro Version: left 24310 Included in delivery: 01x holder for push-through protection, used material color: sendzimir galvanized total width: approx. 93 mm total depth: approx. 93 mm opening dimension f. profiles: approx. 51 x 46 mm (HxW) Hnsdpfxei El S No Addsg material thickness: approx. 3,00 mm number of hooks: 2 hooks Grid spacing: approx. 50 mm Weight/pc.: 0.189 kg

Condition: used, This listing is for a Merck Millipore Scepter 3.0 Automated Cell counter The unit is in full working condition and is ready for immediate release The Scepter™ 3.0 Cell Counter is the only automated cell counter that's both portable and handheld. This compact device brings the accuracy and consistency of Coulter impedance counting directly to your culture hood, eliminating the need for bulky benchtop equipment. While traditional automated counters rely on vision-based systems, object recognition software, manual focusing, and clunky loading chambers, the Scepter™ 3.0 avoids all of these issues. It offers true automation without the risk of human or software error. Featuring a microfabricated, precision-engineered sensor, the Scepter™ 3.0 handles all aspects of cell assessment and calculation, delivering accurate and reliable counts in under 30 seconds. Features: Handheld, portable, and ergonomic design Hnodpfx Adsxv D Dpsdeg Uses the Coulter Principle for precise, reproducible results Compatible with two sensor sizes (40 μm and 60 μm) Displays cell concentration, average size, average volume, and histograms Stores up to 999 counts for PC download and further analysi

Condition: good (used), High speed counter 25/500 kHz, PLC control, counter module -Manufacturer: Siemens, Simatic S5 IP 240 counter modules -Type: 6ES5 240-1AA11 Hnjdpfx Adjhzh Eledsg -Dimensions packaging: 210/275/H40 mm -Weight: 0.6 kg

Condition: used, This listing is for a Pharmagraph S1816 Particle Counter (1 of 8) The unit is in full working condition and is ready for immediate release. The S1816 series is a continuous-monitoring airborne particle counter designed for use in pharmaceutical cleanrooms, isolators, filling suites and similar controlled environments. Hedpfxextnque Addong It is built by Pharmagraph (UK) and intended to meet stringent regulatory/clean-room requirements (e.g., for EU GMP Annex 1 compliance). The unit houses a laser-based sensor (in particular a Met One 6015 sensor) in a stainless-steel enclosure, intended for permanent monitoring rather than portable spot checks

Condition: good (used), Bracket, holder, support block, retaining support Hnedpfolry S Hex Addsg -Bracket: solid construction, 2 pieces -Hole: Ø 48 mm -Screw holes: Hole spacing 165 x 40 mm / Ø 25 mm -Price/Sale: complete -Dimensions: 205/80/H370 mm -Weight: 50 kg

Condition: used, This listing is for a Pacific Scientific 3313LL Met One Particle Counter The unit is in full working condition and is ready for immediate release. Operational & Practical Notes / Behavior The 3313LL counts particles by passing a laser (or light source) through the sampled air stream; when particles pass through the beam, they scatter light, which is detected by a photodetector. By having multiple size channels, the instrument can bin the counts into different particle-size ranges (for example: 0.3 µm, 0.5 µm, 1.0 µm, 3.0 µm, 5.0 µm, 10.0 µm). It likely offers programmable sampling intervals, hold times, alarm thresholds, etc. (common features in Met One/Met One‑type instruments). Hnodpfx Adsxv Ab Hedog Data export via serial is standard, allowing integration with control or data acquisition systems. Because it’s a relatively high‑flow device (1 CFM), it can sample a substantial volume of air (improving statistical confidence in counts). The stainless steel construction helps with durability, cleanliness, and possibly resistance to corrosion or harsh environments. As a used / legacy device, calibration, maintenance, and replacement parts (filters, laser, pump, optics) may be important considerations.

Condition: good (used), Counter support, counter bearing, bearing block, pillow block, bearing for milling machine, milling machine horizontal -Manufacturer: WMW, counter bearing from milling machine FW 400 x 1600 -Dimensions: see drawing in the photos -Transport dimensions: 1505/400/H345 mm Hedpfxegxqtxo Addeng -Weight: 370 kg

Condition: used, This listing is for a Malvern Instruments Multisizer APA2000 Particle Counter Hnedpfx Adoxzg Rcodjg

Condition: good (used), Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 145 by 190 mm, 30 mm high -Drawing with the photos -Dimensions: 290/85/H210 mm -Weight: 12 kg Hnedpfx Asb A I Utjddjg

Condition: used, This listing is for 1 of 2 Morgan Mini Monitor Series 900 Geiger Counter Hnsdpoxzgz Isfx Addeg Over the years Mini Monitor 900s have earned an excellent reputation for reliability, performance, versatility, ease of use and value for money. The 900 series continues to be a popular choice in education, research, medicine, industry and amongst environmentalists and enthusiasts.

Condition: good (used), Bracket, holder, support block, support for conveyor belt, belt conveyor, transport belt, belt conveyor, roller conveyor -Support stand: height-adjustable, swiveling -Height: up to approx. 620 mm -Width: 540 mm -Dimensions: see photos -Number: 2x holders available -Price: per piece Hodoh Eciyopfx Addeng -Overall dimensions: 665/150/H617 mm -Weight: 13.4 kg/pc.

Condition: good (used), Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 275 by 220 mm, 40 mm high -Drawing: in the photos -Quantity: 1x counter bearing available -Price: per piece -Dimensions: 450/110/H300 mm -Weight: 12 kg Hodpfx Ajd Aqtveddeng

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping Hsdpfx Adoxugx Hjdsng -Table surface: 535x250 mm, height 400 mm -Wall thickness: 36 mm -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 97 kg

Condition: good (used), Tensioning device for automatic band saw, saw band rollers, saw band guide -Holder, from Behringer HBP automatic band saw Hedpfjgcct Rox Addsng -Bore: Ø 80 mm -Dimensions: 380/140/H50 mm -Weight: 8.2 kg

Condition: good (used), Bracket, holder, support block, retaining support for conveyor belt, belt conveyor, transport belt, belt conveyor, roller conveyor -Support stand: height-adjustable, swiveling Hnsdeh Ecirjpfx Addeg -Height: up to approx. 650 mm -Width: 550 mm -Dimensions: see photos -Number: 12x holders available -Price: per piece -Overall dimensions: 665/150/H650 mm -Weight: 15.3 kg/pc.

Condition: good (used), Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 85 by 120 mm 25 mm high -Drawing with the photos Hnsdpfxjc Ih Tvs Addjg -Dimensions: 235/100/H270 mm -Weight: 15.5 kg

Condition: good (used), Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 215 to 274 mm, 41 mm high -Drawing with the photos Hjdpec N Dqaofx Addjng -Number: 2x counter bearings available -Price: per piece -Dimensions: 505/180/H295 mm -Weight: 19 kg

Condition: good (used), Sales counter, counter, stainless steel, cabinet, work table -Drawers: 2 -Table dimensions: 700/1600/H830 mm -Roof dimensions: 1800/1670/H2330 mm -Design: stable -Transport dimensions: 2060/730/H870 mm Hjdpfxsb Uhnis Addong -Weight: 120 kg

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 39 mm -T slots: slot width 18 mm Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 100 kg Hnodpexunupsfx Addsg