Used Counterweight for sale (145)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, maximum load weight: 13,400 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,750 mm, loading space width: 2,480 mm, total length: 9,925 mm, total width: 2,550 mm, total height: 3,150 mm, suspension: air, tire size: -, tire condition: 100 %, Additional Information Tandem Platform Trailer Type TPS 180, Standard construction with forklift mount Chassis: Central axle trailer Fine-grain steel welded construction Outer frame slightly angled, new design with Load-Lock profile for securing tie-down straps 1 pair of geared support legs at the front, with straight lower part and single-sided operation on the right-hand side Partial wheel arches 2 plastic toolboxes, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock Mount for a carried forklift at the rear, including 2 fork pockets, 2 extendable support tubes, and a mount for chain securing with a locking pin. Underrun protection with light unit that can be folded away. The forklift mount shifts the axles to the rear; please consider load distribution when driving without a forklift. Customer risk! Note! Forklift mount! Carrying a forklift can significantly reduce the vertical load. Counterweight at the front is required! On wet and slippery roads, additional ballast weight or a load at the front of the trailer, weighing at least 2 tons, is necessary; the speed should then be reduced, and the driving style adapted to the road and driving conditions. The forklift must always be secured with chains during transport. The distance between the lift mast and the trailer body should be a maximum of 45 mm, or the vertical forklift tines must rest against the forklift pockets at the end. We assume that the towing vehicle does not have a steering or lift axle, or that the steering axle is always locked or the lift axle is always on the ground. Godpfx Asndwdhsd Rsui Coupling System: Central axle trailer Drawbar with tested 50 mm drawbar eye, freight forwarding design Lower coupling on the drawbar Folding mount with spring support on the drawbar, for guiding the connecting cables to the truck Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axle/suspension to reduce tire wear and fuel consumption Air suspension with raise and lower valve 1st axle: automatic lift axle with proximity switch, for lift axle Wheels and Tires 385/65R22.5, according to manufacturer's choice Steel rims, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake Vehicle - Driving Stability System Duomatic connection at the front, with connecting cable to the towing vehicle, connection on the right-hand side EBS, Electronic Braking System with EBS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights in LED, side yellow LED lighting, license plate lighting in LED

Condition: used, power: 110 kW (149.56 HP), fuel type: diesel, first registration: 06/2018, Caterpillar M316F with EGSON tiltrotator – Engine: 110 kW – 1 x bucket – Hoses for auxiliary functions – Air conditioning – Counterweight – 2 x support legs – Total weight: 18,000 kg – = Further information = Godpfez Ey N Rjx Ad Rsui Year of manufacture: 2018 Model year: 2018 Operating hours: 9,679 Drive: Wheeled Unladen weight: 17,930 kg CE marking: yes Please contact Miguel Cubas for further information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: new, Long Reach Boom & Arm for Excavators – Custom Made up to 22 m | Dredging, Canal Cleaning & Deep Excavation | Galen Manufacturer Gsdpfx Ajzfwdbod Rsui Custom-built long reach boom and arm systems manufactured by Galen for excavators that need extended digging depth and reach. Our long reach excavator boom is engineered for dredging, river and canal cleaning, pond and reservoir maintenance, deep foundation and basement excavation, slope profiling and embankment work – any job where a standard boom simply cannot reach far or deep enough. We manufacture long reach booms made to order, with reach up to 22 m and beyond, built from Hardox and Strenx high-strength steel for the best balance of reach, durability and weight. Each long reach boom-arm system is produced with full structural calculation, so that machine stability, hydraulic flow and bucket capacity are correctly matched to the extended geometry. The result is a properly balanced long reach system – not just a longer arm – that works safely at full extension. Supplied as a complete long reach boom + arm conversion or as individual sections, including correct hydraulic piping, cylinders and counterweight recommendations. We produce for all major excavator brands and models – Caterpillar, Komatsu, Hitachi, Volvo, Hidromek, Hyundai, Doosan, Liebherr and others – with mounting matched to your exact machine. Typical applications: dredging and waterway maintenance, canal and ditch cleaning, deep excavation, lake and pond work, slope and embankment shaping, and reach work over water or soft ground. As a manufacturer (not a reseller), Galen offers fully custom geometry, OEM/private-label production, engineering support, and export to Gulf, Balkan, Central Asian and European markets. CE-compliant production available on request. Why choose Galen long reach boom-arm: Custom reach engineered to your machine – up to 22 m+ Hardox & Strenx construction: high strength, low added weight Engineered for stability – balanced geometry, correct hydraulics & counterweight advice Complete long reach system or individual boom/arm sections For dredging, canal cleaning and deep excavation Manufacturer pricing, structural support, worldwide shipping Send us your excavator brand, model, operating weight and target reach, and we will engineer a long reach boom-arm system sized exactly to your machine.

Condition: excellent (used), power: 95 kW (129.16 HP), fuel type: diesel, color: other, axle configuration: 4x4, number of seats: 1, first registration: 12/2025, Equipment: air conditioning, all wheel drive, General information Year of construction: 2025 Gedpfx Ads Aiuvfe Rjui Operating hours: 389 Registration number: T-16-HFZ Technical information Number of cylinders: 4 Engine capacity: 3.800 cc Chassis type: articulated Steering: articulated Make axles: Michelin Engine type: Komatsu SAA4D101E Measures and weights Empty weight: 10.585 kg Dimensions (LxBxH): 650 x 225 x 300 cm Wheelbase: 260 cm Functional Working height: 382 cm Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - Blower - Boom suspension - Central lubrication - Electric mirrors - Hydraulic quick coupler - Mudguards - Radio - Seat heating - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage V / Tier V General Country of production: Duitsland Demo machine packed with options including: Hydraulic quick coupler (Volvo system), pallet forks and 1.7 m³ bucket with bolted cutting blade, central lubrication, air conditioning, ECSS suspension system, 3rd and 4th hydraulic functions with drain line, Rear hydraulic function, K-SLS joystick control (CDC), air-suspended luxury seat with seat heating, LED work lights front and rear, rear flasher lights, reversing camera, hydrostatic drive with speed control, reversing fan, Michelin XLD 550/65R25 tires, power connection on arm, extra counterweights, auto-inch function, cruise control, extended warranty until 26-11-2027

Condition: new, 9D715US crankshaft balancing machine is adapted for balancing crankshafts of various designs, including crankshafts of V6, V8, V10 and V12 engines, with balancing weights on the connecting rod pins: - Balancing of crankshafts of any design - Shaft weight up to 300kg - Shaft length up to 1400mm - Drilling module for unbalance correction The machine design allows balancing crankshaft separately, as well as crankshaft complete with flywheel and clutch, which guarantees minimum unbalance during engine operation. MACHINE HIGHLIGHTS • Hard-bearing supports - safe operation with high initial unbalance at low speeds. • Roller cassettes with large diameter spherical rollers and provide the required accuracy for balancing heavy shafts. • Replaceable antifriction prismatic V-blocks allow balancing of crankshafts with low mass or with special bearing journals. • Narrow support stands of the machine allow balancing of crankshafts with complex configuration and with “narrow” bearing journals. The 9D715US machine has a cassette width of 27 mm, which is the best in its class. • For balancing V-shaped crankshafts, the machine can be equipped with counterweights (variable weight) to simulate the weight of connecting rods. • A vertical drilling module mounted on its own guides allows unbalance in the crankshaft counterweights to be corrected directly on the machine. • The frequency converter drive provides smooth acceleration and deceleration of the electric motor and infinitely variable speed control of the rotor. MEASUREMENT AND CONTROL • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • Measuring balancing system has additional necessary functions for crankshaft balancing: - recalculates the unbalanced mass to the drilling depth, taking into account the drill diameter and the permissible drilling depth. - It recalculates the unbalance on several correction planes, so that unbalance can be corrected in neighboring crankshaft counterweights. SPECIFICATIONS Weight range of balanced rotors 3 - 300 kg Maximum rotor diameter (above the bedding) 1100 mm Diameter of rotor support journals 20 - 140 mm Distance between centres of rotor journals 150 – 1350 mm Guodjwk Ittjpfx Ad Rei Support type Rollers / V-blocks Transmission element for rotor rotation Belt Minimum achievable residual specific unbalance 0.4 g.mm/kg Rotor speed range 300 – 1500 rpm Electric motor power 2.2 kW Parameters of the supply network 380V, 3 Ph, 50Hz VTM Group balancing machines will allow you to do your job well and get positive feedback and attract more customers. Do you need a machine for a different load capacity, diameter or length? We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇

Condition: new, fuel type: gasoline, overall weight: 1,300 kg, operation weight: 1,200 kg, maximum load weight: 1,500 kg, lifting height: 1,000 mm, Year of construction: 2026, Equipment: hydraulics, Befard XM1200 - NEW TECHNICAL SPECIFICATION: • Lifting capacity 1200 kg - PICK&CARRY • Lifting capacity 1500 kg - with optional equipment • 3 hydraulic extensions Gsdpewkgq Refx Ad Reui • Arm opening angle 65 degrees • Vertical reach 10 m - with optional equipment • Non-marking tracks • Extendable chassis in the range of 780-1250 mm • Radio control • Column rotation 50 degrees • Knee gear • Possibility of using a 500 kg or 990 kg winch - optional • LED lighting fixed + magnetic AVAILABLE POWER SUPPLY VERSIONS: 3in1 - petrol engine, electric motor (230 V, 400 V, 110 V to choose from) and lithium-ion batteries Combustion - powered only by internal combustion engine, Combustion electric - powered by internal combustion engine and electric 230 V, 400 V or 110 V OPTIONAL EQUIPMENT AVAILABLE: • Winch 500 kg or 990 kg to choose from • Manual JIB arm - increases the reach by 1 m - You can use 2 pcs. Manual Jib for the crane • Searching hook - works in 6 positions, increases the reach by 0.5 m • Hydraulic blade - An additional support blade at the front of the machine extends manually and lowers hydraulically. Additional options are available for the blade: • Forks • Tow hitch: Increases stationary lifting capacity to 1500 kg. Increasing the stationary lifting capacity to 1500 kg and the possibility of using an additional Jib arm • Radio control with display • Platform for standing on the machine - Platform for standing on the machine, as an increase in counterweight (not necessary in standard use) • Extension to the loading platform - Removable extension to the loading platform by approx. 500 m • Suction cup with hydraulic head - Suction cup with hydraulic head controlled from the remote control. Possibility of removing the suction cup and installing the hook. Head mounted at the end of the hydraulic extension • Holder for XP attached to the platform - Holder for XP glass gripper attached to the platform • RAL color - Choice of machine color from the RAL palette • Tow hook - Possibility of using a tow hook for the crane's transport platform • Ramps - Aluminum ramps 2.5 m long Befard XM1200 is a modern mini Pick & Carry crane designed for maximum functionality and mobility in difficult working conditions. Thanks to its compact dimensions, it easily fits through a standard door, and extendable tracks up to 1250 mm wide ensure stability and safety during crane operations. This versatile model offers an impressive reach of up to 10 meters - which allows work at the height of the second floor. The XM1200 mini crane can move with a load of up to 1200 kg, and with the use of support legs its maximum lifting capacity increases to 1500 kg. Optional equipment in the form of a winch additionally increases the flexibility of applications, making the XM1200 mini crawler crane an ideal solution for assembly, service, industrial or construction work. Possibility to test the equipment before purchase. * The price in the offer refers to the basic version powered by a petrol engine * ​​Product on order * Net price

Condition: new, Year of construction: 2026, operating hours: 1 h, Radio-controlled carrier vehicle with forestry mulcher – vehicle in preparation. The Energreen RoboEVO is a radio-controlled carrier vehicle that can also be used in particularly difficult and hard-to-reach terrain with slopes of up to 55°. It is equipped with a powerful 40 hp diesel engine and two double-acting hydraulic control units to ensure compatibility with various attachments. * 150m range of the radio remote control * Optimal maneuverability * Traction in all directions up to 55° * Special oil pan for safe engine lubrication * Multifunctional use * High performance, fast completion of work * Best traction on any surface Special equipment: * Hydr. quick couplings "CEJN" * Radio remote control EU DUAL BAND with tilt sensor * Bio-hydraulic oil PANOLIN HLP SYNTH 46 * Standard color Orange RAL 2011 / Grey RAL 7021 * Rear radiator guard Gujdpov R E Hfofx Ad Roi * Counterweights Comp. 70 kg * 2 LED work lights * LED rotating warning light 12 Volt with bayonet fitting * Pre-installation for hyd. winch Attachment: Forestry mulcher Forestry Head 130H with hydr. quick couplings "CEJN", rotor with hammer flails and material guide frame. Robust, reliable forestry mulcher made of Strenx® steel, ideal for cutting grass, bushes and reeds up to a diameter of 4 cm. Rotor with flails for shredding the cut material. TECHNICAL DATA Cutting width: 1200 mm Oil pressure: 290 bar Number of tools: 22 Oil flow: 55 l/min Hydraulic motor: 23 cm3 Weight: 355 kg We have other grass mulchers, forestry mulchers, brush cutter heads, and a stump grinder in stock. Other attachments such as double knife bars, mowing booms, and many other attachments are available on request! We would be happy to offer you a suitable financing, rent-to-own or leasing option. Delivery or shipping by arrangement. We always have a selection of used and new equipment in stock, and more equipment for demonstration. Please contact us! We also rent out all equipment with or without an operator. Other notes: * Trade-in and purchase of vehicles and machines possible. * Selling price excluding transport * No liability for printing and typographical errors. * Errors, changes and prior sale reserved. * Offer subject to change. * Photos may vary. Price applies to existing condition. * All information without guarantee. Further information Engine power: 41 hp (30 kW) Price: On request

Condition: ready for operation (used), Year of construction: 2011, Features: * Used telescopic belt conveyor * Condition: fully functional, with signs of wear * Ideal for fast material transport * Professionally disassembled and packaged * Color: Blue * 2 units in stock * Price per unit Technical data: Manufacturer: Budde Year of manufacture: 09/11 Model: TGF03 Overall length: 14,530 mm Conveyor length: 14,000 mm Length retracted: 5,000 mm Length extended: 14,000 mm Overall width: 1,240 mm (including control cabinet) Width: 990 mm Belt width: 600 mm Condition: good (used) Belt type: smooth Gedpsd S Hkijfx Ad Rjui Overall height: 750 mm Weight: 2,200 mm Includes counterweights at the rear. Telescopic belt conveyor The telescopic belt conveyor is ideal for linking machines or workstations in the picking area and optimizing internal processes. During transport, the telescopic belt conveyor can transport sensitive and differently sized containers, boxes, or other packaging and item units to the input or output station and can also be used as a connecting section before or between production and processing machines. In addition, it enables efficient parts transport within the company and warehouse and serves to transport significant quantities and distances. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully completed projects for companies in a wide range of industries, such as logistics, pharmaceuticals, trades, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or additional components such as picking shelves or containers.

Condition: new, Year of construction: 2026, operating hours: 1 h, power: 36 kW (48.95 HP), Radio-controlled carrier vehicle with grass mulcher New unit in preparation - example images The Energreen RoboFIFTI RS is a radio-controlled carrier vehicle that can also be used in particularly difficult and hard-to-reach terrain with slopes of up to 55°. It is equipped with a powerful 50 hp Perkins diesel engine and two hydraulic quick-release couplings to ensure compatibility with various attachments. * 150m range of the radio remote control * Optimal maneuverability * Traction in all directions up to 55° * Special oil pan for safe engine lubrication * Multifunctional use Geds Aip R Hjpfx Ad Reui * High performance, fast completion of work * Best traction on any surface Special equipment: * Hydr. quick couplings "CEJN" * Radio remote control EU DUAL BAND with tilt sensor * Bio-hydraulic oil PANOLIN HLP SYNTH 46 * Standard color: Orange RAL 2011 / Grey RAL 7021 * Rear radiator guard * Counterweights Comp. 70 kg * 2 LED work lights * LED rotating warning light 12 Volt with bayonet fitting * Preparation for hydraulic winch Attachment: Energreen Head 155 with hydr. quick couplings "CEJN" and Y-blades Robust, reliable mulcher made of Strenx® steel, ideal for cutting grass and bushes up to a diameter of 3 cm. Rotor with Y-blades with adjustable cutting height. Technical data: Working width: 1300 mm Oil pressure: 305 bar Number of tools: 22 Oil flow: 55 l/min Hydraulic motor: 21 cm3 Weight: 160 kg We have other grass mulchers, forestry mulchers, brush cutter heads, and a stump grinder in stock. Other attachments such as double-blade bars, mowing booms, and many other attachments are available on request! We will gladly offer you suitable financing, rent-to-own, or leasing options. Delivery or shipping by arrangement. We always have a selection of used and new units in stock and other equipment for demonstration. Please contact us! We also rent out all equipment with or without an operator. Other notes: * Trade-in and purchase of vehicles and machinery possible. * Sale price excluding transport * No liability for printing and typing errors. * Subject to errors, changes and prior sale. * Offer subject to change. * Photos may vary. Price applies to the existing condition. * All information without guarantee. Further information Fuel type: Diesel

Condition: used, Year of construction: 2025, operating hours: 320 h, power: 36 kW (48.95 HP), Radio-Controlled Tool Carrier with Grass Mulcher The Energreen RoboFIFTI RS is a radio-controlled tool carrier designed for use in particularly challenging and hard-to-reach terrain, with the capability to operate on slopes up to 55°. It is equipped with a powerful 50 HP Perkins diesel engine and two hydraulic quick-coupling connections to enable compatibility with various attachments. Features: * 150 m radio remote control range * Optimal maneuverability * Ground adhesion in all directions up to 55° * Special oil pan for secure engine lubrication * Multifunctional operation * High performance, fast work completion * Excellent traction on all surfaces Special equipment: * Hydraulic quick couplers "CEJN" * EU DUAL BAND radio remote control with tilt sensor * Bio-hydraulic oil PANOLIN HLP SYNTH 46 * Standard color orange RAL 2011 / grey RAL 7021 * Rear radiator guard * Counterweights Comp. 70 kg * 1 LED work light * LED beacon 12 Volt with bayonet fitting Attachment: Energreen Head 155 with hydraulic quick couplers "CEJN" and Y-blades Robust, reliable mulcher made of Strenx® steel, ideal for cutting grass and bushes up to a diameter of 3 cm. Rotor with Y-blades and adjustable cutting height. Technical Specifications: Working width: 1535 mm Oil pressure: 305 bar Number of tools: 30 Oil flow: 55 l/min Hydraulic motor: 21 cm³ Weight: 310 kg We have further grass mulchers, forestry mulchers, brush cutter heads, as well as a stump grinder in stock. Additional attachments such as double-blade mowers, mower arms, and many more are available on request! We are happy to offer you suitable financing, hire purchase, or leasing options. Delivery or shipping by arrangement. We always have a selection of both used and new machines in stock as well as further units available for demonstration. Feel free to contact us! We also offer all equipment for rent, with or without operator. Gedpfsy Ep Hzox Ad Rsui Other information: * Trade-in and purchase of vehicles and machinery possible * Sale price excludes transport * No liability for typographical or printing errors * Subject to errors, changes, and prior sale * Offer is non-binding * Photos may differ. Price applies to current condition * All information without guarantee Further information Fuel type: Diesel

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 21_0346, NEW - NEVER USED heavy-duty positioner for manual or robotic welding - lifting and turning device. Special Device for Special Tasks designed and produced by FÖRSTER welding systems GmbH. Gedpfx Adjurlcro Rjui Max diameter of the workpiece: 2500 mm Max weight of the workpiece: 20 tons Dimensions of the welding positioner: 7000x3000x3750 mm Weight [without counterweigh]: 20 000 kg Overall dimensions of the whole system: 8900x4800x3750 mm Total weight of the whole system: 40 000 kg Counterweight included with the machine. Full documentation available. Manufacturer's technical support on request. Machine located in central Poland.

Condition: new, fuel type: gasoline, overall weight: 1,500 kg, operation weight: 1,600 kg, maximum load weight: 1,600 kg, lifting height: 1,110 mm, Year of construction: 2026, Equipment: hydraulics, Befard XM1600 WITH HYDRAULIC JIB - NEW Gusdpfx Aoyrf D Ded Roi TECHNICAL SPECIFICATIONS: • Lifting capacity: 1250 kg - PICK & CARRY • Hydraulic jib lifting capacity: 650 kg • Lifting capacity: 1600 kg with blade • Standard support blade Additional blade options: • Forks • Tow hook • 3 hydraulic extensions • Boom opening angle: 65 degrees • Vertical reach: 10 m - with optional equipment • Non-marking tracks • Extendable undercarriage: 780-1250 mm • Radio control • Column rotation: 50 degrees • Toggle gear • Optional 500 kg or 990 kg winch • Fixed and magnetic LED lighting AVAILABLE POWER SUPPLY VERSIONS: 3-in-1 - petrol engine, electric motor (230 V, 400 V, 110 V available) and lithium-ion batteries Diesel - powered only by the petrol engine Diesel-electric - powered by a petrol engine and a 230 V, 400 V, or 110 V electric engine OPTIONAL EQUIPMENT AVAILABLE: • 500 kg or 990 kg winch (optional) • Manual jib arm - extends reach by 1 m - Can be used with two manual jib cranes • Searcher hook - works in 6 positions, extending reach by 0.5 m • Radio control with display • Platform for standing on the machine - Platform for standing on the machine to increase counterweight (not necessary in standard use) • Load platform extension - Removable load platform extension 500 m • XP Mount - Mount for the XP Glass Grabber - Mount for the XP Glass Grabber • RAL Color - Choose your machine color from the RAL palette • Tow Hook - Option to attach a tow hook to the crane's transport platform • Ramps - 2.5 m long aluminum ramps The Befard XM1600 is a modern pick-and-carry mini crane designed for maximum functionality and mobility in challenging working conditions. Its compact dimensions easily fit through standard doorways, and the extendable crawlers, up to 1250 mm wide, ensure stability and safety during lifting operations. This versatile model offers an impressive reach of up to 11.2 meters – enabling work at second-story height. The XM1600 mini crane can move loads up to 1250 kg, and with the dozer blade, its maximum lifting capacity increases to 1600 kg. The optional winch further enhances application flexibility, making the XM1600 mini crawler crane ideal for assembly, service, industrial, and construction work. Test equipment before purchase. * The listed price is for the basic gasoline-powered version. * Product available upon request. * Net price.

Condition: new, Year of construction: 2018, Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Software: metrolog Gusdpfxed Ambtj Ad Roi AN Scan Standard Geosurf Advanced SP Step converter I ++ interface Technical specifications Measurement paths: X: 1200mm Y: 2000mm Z: 1000mm Max workpiece weight: 1200kg Weight of the measuring system: 5700kg Overall dimensions: 3020x2190x3750mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.9μm Volumetric length measurement deviation: MPEE = 2.9+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 120NI / min

Condition: new, fuel type: gasoline, overall weight: 1,300 kg, operation weight: 1,200 kg, maximum load weight: 1,500 kg, lifting height: 1,000 mm, Year of construction: 2026, Equipment: hydraulics, Befard XM1200 - NEW TECHNICAL SPECIFICATION: • Lifting capacity 1200 kg - PICK&CARRY • Lifting capacity 1500 kg - with optional equipment • 3 hydraulic extensions • Arm opening angle 65 degrees • Vertical reach 10 m - with optional equipment • Non-marking tracks • Extendable chassis in the range of 780-1250 mm • Radio control • Column rotation 50 degrees • Knee gear • Possibility of using a 500 kg or 990 kg winch - optional • LED lighting fixed + magnetic AVAILABLE POWER SUPPLY VERSIONS: 3in1 - petrol engine, electric motor (230 V, 400 V, 110 V to choose from) and lithium-ion batteries Combustion - powered only by internal combustion engine, Combustion electric - powered by internal combustion engine and electric 230 V, 400 V or 110 V OPTIONAL EQUIPMENT AVAILABLE: • Winch 500 kg or 990 kg to choose from • Manual JIB arm - increases the reach by 1 m - You can use 2 pcs. Manual Jib for the crane • Searching hook - works in 6 positions, increases the reach by 0.5 m • Hydraulic blade - An additional support blade at the front of the machine extends manually and lowers hydraulically. Additional options are available for the blade: • Forks • Tow hitch: Increases stationary lifting capacity to 1500 kg. Increasing the stationary lifting capacity to 1500 kg and the possibility of using an additional Jib arm Guodpfx Aex A Uc Ajd Rei • Radio control with display • Platform for standing on the machine - Platform for standing on the machine, as an increase in counterweight (not necessary in standard use) • Extension to the loading platform - Removable extension to the loading platform by approx. 500 m • Suction cup with hydraulic head - Suction cup with hydraulic head controlled from the remote control. Possibility of removing the suction cup and installing the hook. Head mounted at the end of the hydraulic extension • Holder for XP attached to the platform - Holder for XP glass gripper attached to the platform • RAL color - Choice of machine color from the RAL palette • Tow hook - Possibility of using a tow hook for the crane's transport platform • Ramps - Aluminum ramps 2.5 m long Befard XM1200 is a modern mini Pick & Carry crane designed for maximum functionality and mobility in difficult working conditions. Thanks to its compact dimensions, it easily fits through a standard door, and extendable tracks up to 1250 mm wide ensure stability and safety during crane operations. This versatile model offers an impressive reach of up to 10 meters - which allows work at the height of the second floor. The XM1200 mini crane can move with a load of up to 1200 kg, and with the use of support legs its maximum lifting capacity increases to 1500 kg. Optional equipment in the form of a winch additionally increases the flexibility of applications, making the XM1200 mini crawler crane an ideal solution for assembly, service, industrial or construction work. Possibility to test the equipment before purchase. * The price in the offer refers to the basic version powered by a petrol engine * ​​Product on order * Net price

Condition: new, Working width 4000 mm Working height 2600 mm Number of cylinders 6 St. Dimensions (L/W/H) 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article .00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article .00 pc Gujdpfsu Uvaljx Ad Roi Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article .00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Shut-off valve on the 3rd vertical cylinder Article .00 pc Shut-off valve on the upper horizontal cylinder Article .00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article .00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item All pressure plates and abutments covered with plastic Article .00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article .00 pc double pendulum pressure plate for pointed windows (triangle) ----- Total price in the above version ex works: On request! ----- Options: Article ....

Condition: used, functionality: fully functional, Year of construction: 1999, Type: Potain 21 B Factory No.: 76196 Gedpfxjz Nxf Ho Ad Rjui Slewing: Lower slewing Maximum boom length (m) / Lifting capacity: 29 m / 0.65 t Minimum boom length (m): 11.20 m Hook height Maximum lifting capacity: 2 t at a specified outreach Ground space required (supports): 3.6 x 3.6 m Slewing radius: 1.9 m Power supply: 32 A (12 kVA) "Transport and assembly requirements (approx.) (up to 50 km transport radius)": Loading crane axle 1 truck + trailer Counterweights (tons) for transport: 12 t Year of manufacture: 1995

Condition: new, Year of construction: 2006, Storage location: 100545026 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Lifting mechanism 65kW 1 x Undercarriage 6.0m track width and required central ballast Tower sections for 30m hook height Gusdpfx As Akiw Dod Rji Slew radius 50m including counterweight Color: Yellow Includes HBC radio control system Location: Regensburg

Condition: new, Year of construction: 2009, Storage number: 100102162 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Undercarriage with 6m gauge, including central ballast Godpfj Akiw Iex Ad Rjui Tower for 30m hook height Outreach 65m, including counterweight Tower system 256HC Cab Radio ABB Central lubrication system 45 kW hoisting gear Price ex works Nuremberg

Condition: new, Year of construction: 2007, Storage location number: 100102375 Transport dimensions (L x W x H): 0 x 0 x m, outreach including counterweight Lifting mechanism: 65 kW Power supply cable: 60 m Lighting transformer: 4.7 kVA Radio system: HBC Guodpfszkznhox Ad Rsi Central lubrication system Assembly platforms Undercarriage: 6.0 m track width Tower sections for 30 m hook height Location: Nuremberg

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 7600-101325, load capacity: 340 kg, arm reach: 2,800 mm, pivoting range: 360 °, warranty duration: 4 months, Equipment: documentation/manual, Robot with a 4-month warranty General overhaul included: - Cleaning: Thorough cleaning of the robot panel and surface. - Oil change: Changing the oils for all six axes. - Battery replacement: All internal batteries were replaced with new batteries. - Mechanical maintenance: Gears and counterweight were inspected and serviced after repeatability and weight tests. - Electronic maintenance: Drivers, electronic boards, teach pendant, and PC components were serviced. - Polishing and repainting: The robot was polished and repainted in the original color or a custom color upon request. TECHNICAL DETAILS Reach: 2800 x 3171 mm Payload: 340 kg Control: IRC5 Axis 1 – Rotation motion: +180° to -180° Axis 2 – Arm motion: +85° to -60° Axis 3 – Arm motion: +60° to -180° Axis 4 – Wrist motion: +300° to -300° Axis 5 – Bend motion: +100° to -100° Axis 6 – Turn motion: ±360° (standard), max. ±67 revolutions Guedpfx Aszdrx Red Rji Dynamics (max. rotation speed per axis) Axis 1: 75°/s Axis 2: 60°/s Axis 3: 60°/s Axis 4: 100°/s Axis 5: 100°/s Axis 6: 160° °/s Position and Path Precision Position Accuracy (AP): 0.18 mm Repeatability (RP): 0.27 mm Stabilization Time (Pst at ±0.4 mm): 0.18 s Path Accuracy (AT): 2.05 mm Path Repeatability (RT): 0.23 mm FEATURES - 6-axis industrial robot with a high payload class - Large swivel range on axis 6 with up to 67 revolutions - Precise path guidance with repeatability of less than 0.3 mm - High speed of the wrist axes for fast movements - Perfectly suited for heavy-duty handling and precise motion sequences