Used Cpu 943 for sale (299)

Condition: ready for operation (used), Drilling diameter: 3-25mm, drilling depth: 1000mm, connected load: 36kW, control: EST, 99 drilling memory positions per program, grinding and coordinate programming, plain text programming via input mask. Accessories: paper band filter, coolant cooling system, 4-door control cabinet, high-pressure pump up to 150bar, oil tank, 1 steady rest for smaller diameters at large drilling depths, direction-adjustable holder for drill bushing holders, various drill bushing holders, long clamping table for 0-height, tailstock stop and base plate for machine vice freely movable on the additional table, matching precision machine vice optionally available. Speed, high pressure, Z-axis (feed), X/Y-axes, and W-axis (approach slide) programmable via control. CPU and card rack defective (fan fault), machine therefore not operational, drives and guideways were fully functional until last operation. An on-site inspection is possible. Gedpsylbrqsfx Adbsbi

Condition: like new (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 1,000 mm, Equipment: documentation/manual, SEPRO Success 11C (2023) Linear cartesian robot , 1500mm Number of axis: 3 X = 1500 mm Y= 500 mm Z= 1000 mm Godex Dnc Sspfx Adbobi Payload: 5 kg Euromap 67 More information in photos of this robot, complete manuals available. SEPRO SUCCESS 11 – Technical Data (Summary) Robot type: Success 11 Serial number: R009519 Mechanics 1. Payload: 5 kg 2. Robot weight: 204 kg 3. Robot dimensions: 2430 × 1200 × 1570 mm 4. Max. pneumatic pressure: 7 bar 5. Air consumption: 140 l/min (normal), 260 l/min (peak) Stroke axes X-axis (horizontal stroke): 1. Stroke: 1500 mm 2. Speed: 2.0 m/s 3. Repeatability: ±0.1 mm Y-axis (horizontal take-out): 1. Stroke: 500 mm 2. Speed: 2.0 m/s 3. Repeatability: ±0.1 mm Z-axis (vertical): 1. Stroke: 1000 mm 2. Speed: 3.0 m/s 3. Repeatability: ±0.1 mm Rotations 1. R1 pneumatic rotation: 0–90° 2. R3 pneumatic rotation: 0–180° or 0–90° Control system – Visual 2 1. Weight: 43.5 kg 2. Dimensions: 550 × 400 × 295 mm 3. Power supply: 3×400–480 V ±10% 4. CPU: i.MX537 / Cortex A8 @ 800 MHz 5. Memory: 512 MB DDR + 512 MB Flash 6. SD card: 4 GB 7. I/O: 8. Robot: 16 inputs / 16 outputs 9. Cabinet: 7 inputs / 8 outputs 10. USB ports: 1× Master USB, 1× Slave USB 11. Ethernet 10/100 Pneumatics 1. 2 pneumatic circuits 2. Vacuum and pressure functions available Environmental conditions 1. Operating temperature: +5 to +40 °C 2. Storage temperature: –25 to +55 °C 3. Humidity: 30–95% (non-condensing) 4. Protection rating: IP22 / IK07 Options 1. PC Editor (Windows XP to Windows 7) 2. Conveyor control (3×42V AC to 3×550V AC) 3. Safety kit for access door 4. 1× conveyor

Condition: used, SIEMENS 6FC5410-0AY03-1AA0 + 6FC5447-0AA01-0AA0 SINUMERIK 810D CPU CCU3.4 Gbedpfx Adevl Ixmebji Condition: Used (working), incl. 3-day functional guarantee after receipt of goods.

Condition: new, neu ca. 4 Monate ab Auftragse Italien 72500 € 1370.25 € 35 to 500 mm 700x350 mm 700x500 mm 600 mm 250 mm 125 mm/s 43 mm/s 9 mm/s 68 mm/s 4 kW 1100 mm 1400 mm 2300 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Gbsdpfsynndlsx Adbsi Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following "IV enclosure" OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns

Condition: new, neu ca. 4 Monate ab Auftragse Italien 190000 € 3591 € 300 to 500 mm 5.000 x 3.050 mm 700 mm 20 mm/s Gbodpfxeynnc Us Adbei 2 mm/s 4000 mm 5000 mm 2600 mm 18000 kg horizontal verschiebbar 3050 mm 2.200 mm 3.600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: new, neu ca. 4 Monate ab Auftragse Italien 138000 € 2608.2 € 170 to 500 mm 870x500 mm 1000x600 mm 600 mm 300 mm 110 mm/s 42 mm/s 7 mm/s 70 mm/s 19 kW 1500 mm 1950 mm 2650 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Gedpeynmx Ujfx Adbebi Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following "IV enclosure" OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns

Condition: new, neu ca. 4 Monate ab Auftragse Italien 89700 € 1695.33 € 85 to 500 mm 700x400 mm 800x600 mm 600 mm 300 mm 105 mm/s 41 mm/s 7 mm/s 58 mm/s 7.5 kW 1200 mm 1600 mm 2500 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Godpoynmxzjfx Adbjbi Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following "IV enclosure" OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns

Condition: new, neu ca. 4 Monate ab Auftragse Italien 79500 € 1502.55 € 60 to 500 mm 700x350 mm 700x500 mm 600 mm 250 mm 120 mm/s 38 mm/s 8 mm/s 58 mm/s 5.5 kW 1100 mm 1500 mm 2350 mm 4 guides for the slide Gsdpfx Adeynmxuebobi T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following "IV enclosure" OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns

Condition: new, neu ca. 4 Monate ab Auftragse Italien 80000 € 1512 € 200 to 500 mm 2.000 x 1.550 mm 800 mm 20 mm/s 2 mm/s 2400 mm 2000 mm 2600 mm 4800 kg horizontal verschiebbar 1550 mm 1000 mm 1300 mm horizontal movable cylinder Gbjdpfeynmv Hjx Adboi hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: new, neu ca. 4 Monate ab Auftragse Italien 92000 € 1738.8 € 200 to 500 mm 2.500 x 2.050 mm 800 mm 20 mm/s 2 mm/s 2950 mm 2500 mm 2600 mm 6500 kg horizontal verschiebbar 2050 mm 1450 mm 1600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Gbjdpfx Aeynmvyedbei Oil cooler and decompression valve

Condition: new, neu ca. 4 Monate ab Auftragse Italien Gsdjynmvgjpfx Adbobi 107000 € 2022.3 € 200 to 500 mm 3.000 x 2.550 mm 800 mm 20 mm/s 2 mm/s 3550 mm 3000 mm 2600 mm 8500 kg horizontal verschiebbar 2550 mm 1900 mm 2000 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: new, neu ca. 4 Monate ab Auftragse Italien 135000 € Gbsdpfxjynmvaj Adbei 2551.5 € 300 to 500 mm 3.000 x 2.050 mm 700 mm 20 mm/s 2 mm/s 3100 mm 3000 mm 2600 mm 11500 kg horizontal verschiebbar 2050 mm 1300 mm 2000 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: new, neu ca. 4 Monate ab Auftragse Italien 160000 € 3024 € 300 to 500 mm 4.000 x 2.550 mm 700 mm 20 mm/s 2 mm/s 3550 mm 4000 mm 2600 mm 15000 kg horizontal verschiebbar 2550 mm 1.800 mm 2.800 mm horizontal movable cylinder Gsdpfjynmu Nox Adbobi hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: new, neu ca. 4 Monate ab Auftragse Italien 218000 € 400 to 500 mm 4.000 x 2.550 mm 700 mm 20 mm/s 2 mm/s 4000 mm 4000 mm 2600 mm 20500 kg horizontal verschiebbar 2550 mm 1.800 mm 2.900 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH Gbjdpfx Ajynmu Aedbsi OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: new, neu ca. 6-8 Wochen ab Auftrag Italien 500 to 500 mm 5.000 x 2.550 mm 700 mm 18 mm/s 3 mm/s 5000 mm 5000 mm 3000 mm 32000 kg horizontal verschiebbar 2550 mm 1.700 mm 3.600 mm horizontal movable cylinder hydraulicaly movable stand Godeynmupspfx Adbsbi control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: new, neu ca. 6-8 Wochen ab Auftrag Italien 600 to 500 mm 6.000 x 2.550 mm 700 mm 18 mm/s 3 mm/s 5000 mm 6000 mm 3000 mm 43000 kg horizontal verschiebbar 2550 mm 2200 mm 4600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel Gbjdpfx Adjynmucjbei according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: new, neu ca. 4 Monate ab Auftragse Italien 75000 € 1417.5 € 150 to 500 mm 2.500 x 2.050 mm 800 mm Gbedpfx Adjynmp Toboi 20 mm/s 3 mm/s 2900 mm 2500 mm 2500 mm 5200 kg horizontal verschiebbar 2050 mm 1400 mm 1600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Condition: good (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Gedpfxou Aa I Ss Adbjbi Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Danumeric 440 overhauled and digitized 2024 Gbedpfx Aeu Dg D Asdbei Machine version - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns Data interfaces USB

Condition: good (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 Gbedjrmkfnepfx Adbsi CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually Gedpfx Adovv Spkjbebi probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: used, Year of construction: 1995, machine/vehicle number: 9503264, Palettenstretchmaschine - Pallet Wrapping Machine W&W EFA5 1450Year 1995 - Serial-No. 9503264-943-3144 Gbsdpfx Aeh Axr Djdbsi Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, PLC control, central assembly, RAM, CPU, central device, positioning assembly -Manufacturer: pilz, positioning assembly 6 axes Gedpfx Asn Nbnusdbjbi -Type: P10-MMC6 304518 -Quantity: 1x module available -Price per piece -Dimensions: 250/230/H40 mm -Weight: 1.1 kg/pc.

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller from DMT CD320 cycle lathe -Type: MOD13/1X0296-029 -Contr: TD M3..-020-300-WO -Dimension: 330/70/H390 mm -Weight: 6.4 kg Gbodpfjn Tvb Ssx Adbei

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control, converter, controller, servo line former, drive control device Godpsn Tvcdofx Adbebi -Indramat: AC Servo Line Former from DMT CD320 cycle lathe -Type: NAM 1.2-15 -Item: 246506 K39/96 -Dimension: 325/105/H390 mm -Weight: 21 kg