Used Cpu for sale (250)

Condition: good (used), PLC controller, central assembly, working memory, CPU, central unit, central processing unit, compact unit, compact CPU -Manufacturer: Siemens, Central processing unit CPU 315-2 Simatic S7-300 -Type: 6ES7 315-2AF03-0AB0 -Quantity: 1 module available -Dimensions: 120/80/H125 mm -Weight: 0.5 kg Njdpfx Aonbhkwobuolh

Condition: ready for operation (used), Marposs 6840021303 / E348 CPU M12 486 SN:25001-24555, used, normal signs of wear, 100% fully functional, scope of delivery as shown in photos. Nlsdpfex Et H Isx Abush

Condition: ready for operation (used), Motorola M68VECPU CPU - board Serial number: G662, used, in good condition, 100% functional, scope of delivery as per photos. Nlsdpfx Aex Et Nisbujh

Condition: ready for operation (used), Kontron CP6500-V / 31.251-1010.1/L01 control unit / CPU SN: 252935022, used, good condition, 100% functional, scope of delivery as per photos Njdpfx Aox Et Dmebuelh

Condition: ready for operation (used), Siemens 6ES7511-1CK00-0AB0 Compact CPU 1511C-1 PN, version: 03, SN: C-JDM85815, used, in good condition, fully functional, scope of delivery as shown in the photos. Nledpfxjx Euqze Abush

Condition: used, functionality: fully functional, Ferwood Code: RU0005249 - Manufacturer Code: 2-083-03-0092 - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC - EDGE BANDER - LOADING UNLOADING HOMAG KAL-KFL - BARGSTEDT - HOMAG BAZ - If interested we offer an overhaul service, contact us. Nsdpfx Abjv Ed Taeuolh

Condition: used, Year of construction: 2013, Overview This Cermex F38741, built in 2013, is an automatic cardboard case erector that forms shipping cases from flat blanks for an end-of-line packaging setup. Blanks are taken from the magazine, erected, the bottom flaps are folded and closed, and the open case is discharged on the outfeed rails to the downstream packer. The machine comes from a wine packaging operation and has been dismantled and stored. Technical data - Manufacturer: Cermex - Model: F38741 - Year of manufacture: 2013 - Machine type: automatic cardboard case erector - Output: up to 40 cases per minute - Power supply: 400 V, 50 Hz, 3P+N+PE, 23 A full load - Control: Siemens SIMATIC S7-200 PLC (CPU 224) Nlsdpfx Abs Afdr Njush Equipment - Blank magazine with infeed chain and lugs - Erecting station with pick-up head on a cable-chain carriage - Bottom flap folding and closing section - Outfeed rails for the erected cases - Enclosure with transparent safety doors and signal tower - Separate control cabinet with Siemens operator panel, emergency stop and control transformer - CE marked Condition Dismantled and stored. An inspection is possible. Availability Available immediately. Location: France.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,809 h, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,650 kg, controller manufacturer: SIEMENS, controller model: S7 with SIMATIC HMI Touch Panel, product length (max.): 2,400 mm, Circular Metal Saw manufactured in 2023. This PRESSTA EISELE PROFILMA 502 features a powerful 7.5 kW saw drive with a maximum saw blade speed of 2,850 rpm. It offers a cutting capacity of 270 x 150 mm and a maximum profile width of 270 mm. The machine includes a Siemens S7 control system with a touch panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE PROFILMA 502 machine we have for sale. Contact us for further details. Technical Specifications • Saw Drive Power: 7.5 kW (7,500 W) • Duty Cycle: S6 • Saw Blade Speed: Max. 2,850 rpm • Power Supply: 400 V, 3-phase, 50 Hz • Current Consumption: 16 A • Operating Pressure: 6–8 bar Cutting Capacity • Maximum Cutting Width: 270 mm • Maximum Cutting Height: 150 mm • Maximum Cutting Diameter: 270 mm • Maximum Round Material Capacity (90°): 190 mm • Maximum Profile Width: 270 mm • Section Length Range: 3–4,000 mm • Minimum Remnant Length: From 75 mm (depending on profile) Saw Blade • Saw Blade Diameter: Ø550 mm • Saw Blade Bore: Ø40 mm Nlodpfx Aezi S R Rebush Control System • PLC: Siemens S7 • HMI: SIMATIC Touch Panel • Controller: CPU 315 • Safety System: Flexisoft • Functions: • Piece counter • Batch multiplier for bundle processing • Cycle time display • Chain dimension management • Fault diagnostics Connectivity • Remote Access: IXON router with VPN connection Material Feed System • Drive Type: Electronic servo drive • Feed Stroke: 800 mm • Drive Mechanism: Ball screw spindle • Maximum Profile Length: 4,000 mm • Feed Support: Lift/lower roller support Saw Feed • Feed Type: Motorized • Feed Adjustment: Stepless • Cutting Direction: Bottom to top Clamping System • Type: Pneumatic horizontal and vertical clamping • Clamping Position: Feed and discharge sides • Pressure Control: 6 individual pressure regulators Lubrication • Lubrication Type: Intermittent spray system • Reservoir Capacity: 1 L • Features: • Level monitoring • Automatic shut-off Safety Features • Complete safety enclosure • Sound-insulated machine frame • Automatic machine shut-off at end of material stock • Cutting gap extension to protect cut surfaces Material Support • Infeed Conveyor: 740 mm roller conveyor with intrusion guard • Outfeed Table: 450 mm Pertinax support table with intrusion guard Extraction • Extraction Ports: 2 × Ø100 mm Chip Extraction Unit • Model: MG 3 (Italyvacuum Vortex 58 FT) • Year of Manufacture: 2022 • Motor Power: 3 kW • Voltage: 400 V / 3~ (±5%) • Current Consumption: 7.2 A • Weight: 130 kg • Features: • Integrated cyclonic separation system • Contactless antistatic system Additional Information • Machine can be inspected under power.

Condition: like new (used), Year of construction: 2023, Robodrill D21MIB5P/10K/2-W FANUC ROBODRILL D21MIB Plus Version with 2 option slots 24,000 rpm high-speed spindle X-axis travel: 500 mm Extended column +100 mm FANUC CNC control Series 31i-B High-speed CPU CE-compliant version Control panel with touchscreen including touch pen Enabling switch Machine interior with LED lighting Automatic oil lubrication Standard air blow function Telescopic cover for X-axis Z-axis protective cover Spindle head cover Machine enclosure for X500 version 32 A CEE connector Transformer for European version Air distribution system English machine and safety labeling Documentation / operating and spare parts manuals, English Nsdpfx Abj Adu Iljujlh CE basic package CE basic package PE connection kit 32-A CEE plug FANUC DDRIB rotary table Integration of a FANUC DDRIB rotary table Additional controlled axis Additional axis amplifier 80 A DDRIB connection / plug connection FANUC DDRIB rotary table, 1 unit Cable holder for X500/X700 Integration of the DDRIB including rotary feedthrough FANUC coolant system BASIC, left-hand side, without chip conveyor External cooling (AK) with 5.5 bar Flushing of the work area / chip flushing with 200 l/min Left-hand version Without chip conveyor 3-year-old machine that is completely new but has not been accepted by the end customer from Fanuc in the last 3 years.

Condition: used, PLC control, CPU, main memory, CPU, central unit -Manufacturer: Siemens, central device Central Controller Simatic -Type: Simatic S5 101U 6ES5 101-8UA13 -Dimensions: 260/115/H165 mm Nlodpfxohy Rp Ae Abujh -Weight: 2.9 kg

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, number of axes: 3, This 3-axis DENER PL 1530 plasma cutting machine was manufactured in 2019. It features a cutting width of 1,500 mm and a cutting length of 3,000 mm, equipped with a Hypertherm HPR 130 XD high-definition plasma source. The machine is in new condition, installed but never used, with 0 working hours. If you are looking to get high-quality plasma cutting capabilities, consider the DENER PL 1530 machine we have for sale. Contact us for further details. • Condition: As-new; installed ~95%, powered on only; 0 working hours • Plasma source: Hypertherm HPR 130 XD high-definition • Working area: X 1,500 mm; Y 3,000 mm • Table/cutting heights: Table 750 mm; Cutting 570 mm • Axes/drives: • X: double synchronized AC servo, rack & pinion • Y: synchronized AC servo, rack & pinion (double-sided brushless AC servos) • U: double synchronized AC servo • Motors: brushless AC servo • Rapid positioning speed: 26 m/min • Positioning accuracy: ±0.01 mm (X/Y/U) • Control and HMI: • DENER factory CNC, Windows-based • 12" TFT LCD monitor, fixed CNC panel + separate control panel • Celeron 733 industrial CPU, 20 GB industrial HDD • Standard keyboard and PS/2 mouse • Cutting system/features: • Automatic height sensing and following; Hypertherm arc height control • Collision protection on plasma head • Plasma ignition control; speed control unit • Sheet alignment/positioning function • Independent sectional cutting table separated from bridge/frame, with automatic fume extraction doors • Head bridge and side guides • CE conformity; colored signal lights • Electrical/data: • Power supply: 400 V ±10%, 50–60 Hz ±2% • Power: 27 kW • Working temperature: -10 °C to +30 °C • Communication/IO: • 2x RS-232, 2x USB 2.0, LAN Njdpfxjzhbf Ue Abuelh • Encoder fault diagnosis; max encoder input frequency 500 kHz • Analog inputs for potentiometer Additional equipment • Nesting PC software (as per original offer) • Spare parts kit (1 set) • Spare parts, consumables and starter kit

Year of construction: 2022, operating hours: 1,529 h, condition: ready for operation (used), Optical measurement machine manufactured in 2022. This ZEISS ATOS Q 12M features dual 12-megapixel CMOS cameras with a resolution of 4112 x 3008 pixels. It includes multiple measurement volumes, with the largest measuring 500 x 370 x 320 mm. The system operates efficiently with a maximum rotary table load capacity of 150 kg. If you are looking to get high-quality optical measurement capabilities, consider the ZEISS ATOS Q 12M machine we have for sale. Contact us for further details. Nsdpfx Aez D Etrsbuelh - Camera Resolution: 2 x 12-Megapixel CMOS Cameras (4112 x 3008 pixels)- Operating/Worktime Hours: 1,529 h (Overall work time / Overhaul work time)- Measurement Volumes (MV) & Specifications:* MV50: 50 x 35 x 20 mm; Point Spacing (12M): 0.012 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 90 mm; Projector Lens Focal Length: 60 mm; Ref Points: Ø 0.4 mm; Calib Object: CP40/MV60* MV100: 100 x 70 x 60 mm; Point Spacing (12M): 0.029 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 50 mm; Projector Lens Focal Length: 27 mm; Ref Points: Ø 0.8 mm; Calib Object: CP40/MV100* MV170: 170 x 130 x 130 mm; Point Spacing (12M): 0.044 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 35 mm; Projector Lens Focal Length: 20 mm; Ref Points: Ø 0.8 mm; Calib Object: CP40/MV170* MV270: 270 x 200 x 200 mm; Point Spacing (12M): 0.064 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 25 mm; Projector Lens Focal Length: 14 mm; Ref Points: Ø 1.5 mm; Calib Object: CP40/MV320* MV350: 350 x 260 x 260 mm; Point Spacing (12M): 0.091 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 16 mm; Projector Lens Focal Length: 10 mm; Ref Points: Ø 1.5 mm; Calib Object: CP40/MV320* MV500: 500 x 370 x 320 mm; Point Spacing (12M): 0.124 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 12 mm; Projector Lens Focal Length: 6 mm; Ref Points: Ø 3.0 mm; Calib Object: CP40/MV560- Actual System Operating Temperatures (Status Screen):* temp0 Monoboard: 44.0 °C* temp1 Timber: 25.5 °C* temp2 Air: 21.7 °C* temp3 LED: 36.0 °C* temp4 Frame-P: 27.8 °C* temp5 DMD-P: 29.4 °C* temp6 Lens: 29.7 °C- Fan Speeds: Electronic Fan: 4237 RPM; Lamp Fan: 4359 RPM- System Orientation: Pitch: 14.9°; Roll: -3.7°- Rotary Table Load Capacity: Max. 150 kg (or max. 40 kg depending on setup configuration)- Tilt and Swivel Unit Load Capacity: Max. 5 kg- Mobile Workstation Laptop Spec (Dell Precision 7760): 17" Display, 64-bit Intel 2.6 GHz Octa-Core CPU, 64 GB RAM, NVIDIA Quadro OpenGL Graphics, 1 TB SSD, I/O: Wi-Fi, LAN, 3x USB 3.2 / Thunderbolt 4- Included Accessories & Equipment: Tripod, 4 measurement fields (MV50, MV100, MV270, MV500) with calibration plates, Rotary/pan unit with lift, Rotary table with 19" control unit, Mobile controller, Converter box with image processing card (fiber optic to Thunderbolt 3), Carrying case, Power supply, Dongle-based software license

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 220 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 150 mm, number of axes: 3, Gantry milling machine manufactured in 2016. This ISEL ATN Vergusssystem 3 features a robust assembly with X, Y, and Z-axis components, along with a PC control system equipped with a monitor, keyboard, and mouse. The machine offers travel ranges of approximately 220 mm in X, 500 mm in Y, and 150 mm in Z. If you are looking to get high-quality milling capabilities, consider the ISEL ATN Vergusssystem 3 machine we have for sale. Contact us for further details. Nledpfxezw H Efj Abush - CNC Potting & Dosing System- Machine 1: 0 hours- Machine 2: approx. 20 hours- Machine 3: approx. 500 hours- 3 machines in total- Components per Machine: ISEL machine base frame with X, Y, Z-axis assembly, PC control system with monitor, keyboard and mouse- Loose Accessories: None (all components are assembled together)- External Dimensions: 4 m wide x 1.4 m deep x 2.6 m high (one machine is smaller due to the Y-axis configuration)- Axis data specified for each machine:- Travel Ranges: Approx. X- 220 mm, Y- 500 mm, Z- 150 mm- PC Processor / CPU: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz- PC Memory / RAM: 4096 MB DDR3 1333- BIOS: American Megatrends Inc. RX67QV BIOS Ver 1.05- Software Included: ISEL Remote program (for programming travel paths), ATN software (for programming movements with dosing times for casting/potting systems, e.g., Hilger & Kern), WinControl- Linear Drive Motor / Actuator Specs: Iselgermany EC-LES Spindelantrieb, 135W / 48V- Linear Module Type: Isel Linear-Einheit LES 4

Condition: used, Central processing unit, control, switchgear, CPU, SPS, SPS control -Manufacturer: Mitsubishi, SPS control from tray sealing machine Inauen VC999/ TS 1200 N -Type: FX2n-48MR-DS -Total dimensions: 295/90/H83 mm -Weight: 1.3 kg Nledpjm Dyh Aofx Abush

Condition: used, Laserline Type: LPC03 Lascon laser system with Lascon controller LPC03 Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Laser class 1 Type: LDM 500-60 Lascon controller LPC03 Nedpozdqkrefx Abuolh The LPC03 has the processing power of a complete PC in a very small space. Instead of a hard drive, a removable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited for tasks in the field of measurement, control and regulation in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Environment: 15°C - 40°C Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Nodpfx Asxwaz Hsbujlh

Condition: ready for operation (used), Year of construction: 2020, total height: 2,220 mm, overall weight: 14,000 kg, controller manufacturer: BOSCH, controller model: MTX, number of axes: 6, This 6-axis Baykal BPM-T 1525X30 was manufactured in 2020, featuring a robust 30-ton hydraulic punching force and a versatile tooling system with 20 stations and indexable tool holders. It supports a working range of 3000 × 1500 mm and rapid axis speeds (X: 100 m/min, Y: 80 m/min). Equipped with Bosch MTX CNC control and Lantek CAM software, it ensures precision and efficiency. If you are looking to get high-quality punching capabilities, consider the Baykal BPM-T 1525X30 machine we have for sale. Contact us for more information. Additional equipment • Hydraulic Motor Power: 11 kW • Axes Drive Type (C1 and C2): Direct drive • Hydraulic Punching Force: 30 tons • Portable CNC Control Panel • Work Chute: Automatic system to take out cut parts • Mobile Storage Box for Cut Parts • Waste Box • Light Barriers Machine Benefits Technical Machine Benefits • Ce conformity • Maximum sheet thickness: 6. 4 mm • Maximum punching rate: 1 mm nibbling: 900 hits/min 25 mm nibbling: 580 hits/min • Maximum punching diameter (for 6. 4 mm thickness): 25 mm • Number of clamps: 3 • Tables: movable in y axis • Table height: 980 mm • Movable table: 1300 × 5200 mm with ball transfers Extra Information The machine is in excellent condition, has only a few hours of operation, and is like new. Control Unit Control: Bosch MTX Operating System: Windows Hard Disk: 150 GB CPU: 2 GHz RAM: 2 GB Data Transfer: USB stick memory Display: 12" TFT LCD color screen Movement Axes: 6 (X, Y, Z, C1, C2, T) Axis Speeds: X: 100 m/min Y: 80 m/min X + Y combined: 128 m/min C1 / C2 rotation: 300 rot/min T axis: 20 rot/min Repositioning: Available Positioning Accuracy: ±0.1 mm Repeatability: 0.04 mm CAM Nesting Software: Lantek Turret Njdpfx Abjzbiybouelh Tool Rotation: Indexable Multitools Support: Available (3 or 8 tools) Total Number of Tool Stations: 20 Indexable Tool Holders: Standard 4 (option up to 10) Tool Change Time (multitools): 0.3 s Maximum Tool Change Time (turret): 3 s Dimensions Machine Depth 6370 mm

Condition: ready for operation (used), Philips 40222262361 / 40222262361 CPU – circuit board, E-version: A, used, in good preserved condition, 100% functional, delivery as per photos Nsdpfex Et S Dsx Abuslh

Condition: excellent (used), Year of construction: 2024, operating hours: 1,200 h, functionality: fully functional, Offered: Sinker EDM machine genius750NOVA + connection Chameleon Linear - 120 electrode positions - 6 pallet positions 400x400 Sinker EDM machine genius 750 NOVA Right-hand configuration Control panel on the right, automation possible from the left side! * Travel ranges X * Y * Z: 420mm * 420mm * 400mm * Work table: 600mm * 600mm * Work table T-slots: number / width / spacing: 6 slots / 10mm / 83/100/100/100/83 * Controlled C-axis with n = 45 1/min * High retraction speed due to acceleration of 10 m/s² in Z and 20 m/min travel speed Generator * genius IPMtec, with comprehensive technology package for graphite, copper, and tungsten copper for machining all materials commonly used in tool and mold making * max. working current 52A, optional 100A or 196A (with 96A booster) Control system * Internal control computer with 1.2 GHz RISC CPU, 64-bit * Industrial PC with user interface, based on Win 10 * 22“ touchscreen, keyboard, mouse and handheld unit for setup with joystick, handwheel and touch display * Connections: LAN, USB, RS-232 Connection values * Electrical: 6 kVA, 400V, 50Hz * Pneumatic: 6 bar, 10 l/min * Required cooling capacity: 4.5 kW for cooling of dielectric fluid and control cabinet Chameleon base unit consisting of: * Robot * ZK’s own robot controller * 1 guide rail * 1 base magazine without magazine levels with rack and pinion drive Nljdpfx Abezzawpeush Chameleon expansion magazine including base plate and glass sliding door set (magazine positions not included)

Condition: used, B&R 2005 CPU module CP152- removed from Ferromatik E50 - removed from running machine - housing renewed - compatible with all B&R 2005 controls - fully functionalManufacturer: B&R type: CP152 spare part no.: 1676890710, 10010792 manufacturer No.: 3CP152.9 Njdjyxg Tuspfx Abuolh

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 3,765 mm, travel distance Y-axis: 1,560 mm, travel distance Z-axis: 378 mm, number of axes: 3, spindle motor power: 13,200 W, spindle speed (max.): 24,000 rpm, This 5-axis BIESSE Rover PLAST A FT 1536 was manufactured in 2020, featuring a robust electro-welded base and high-precision movement systems. It boasts a main electrospindle power of 13.2 kW, a programmable rotation speed up to 24,000 RPM, and an 8-position revolver tool magazine. Ideal for intricate woodworking, it includes a 21.5" LCD monitor and Industry 4.0 integration. Consider the opportunity to buy this BIESSE Rover PLAST A FT 1536 CNC Wood Machining Centre. Contact us for more information. • Maximum piece clearance: 170 mm • Axis speeds: X 85 m/min, Y 60 m/min, Z 20 m/min • Base: Electro-welded closed-circuit structure with high-thickness steel plates • Axis drives: X with two independent brushless motors and helical rack & pinion; Z with preloaded ballscrew, ISO5 precision Nljdpfx Aezug N Sobueh • Work table: Phenolic laminate with 30 mm grid vacuum system; vacuum steps every 150 mm; M8 threaded inserts for templates/fixtures • Main electrospindle: 13.2 kW (17.7 HP), HSK F63, air-cooled, 1,000–24,000 rpm • Tool magazine: 8-position revolver on Y-carriage; max tool diameter 110 mm; max tool weight 7.5 kg (32 kg total magazine) • Tool measurement: Digital presetter for tool length measurement up to 130 mm diameter • Control system: BH660 PC-based with Windows Real Time (WRT); CPU Intel Core i5 or better; 8 GB RAM; 128 GB SSD or better; 21.5" LCD monitor • Power supply: 380/400/415 V, 50/60 Hz • Automatic lubrication system for moving parts • Software: bSolid 3D CAD-CAM for design, simulation, and process management • Connectivity: Industry 4.0 integration via TCP/IP and OPC-UA Additional equipment • Vacuum pump: 250 m³/h, dry-running • Air conditioner for the electrical cabinet • Safety guarding: 2 m high protection nets and front vertical photocells

Condition: ready for operation (used), Siemens 6FX1147-4BB00 NC-/COM-CPU E Stand E, used, normal signs of use, 100% functional, scope of delivery as per photos Nedpfjxagq Tox Abuslh

Condition: ready for operation (used), Siemens 6FX1136-3BB01 Servo CPU E Stand E, used, normal signs of wear, 100% functional, scope of delivery as per photos. Nledpfexagqajx Abueh

Condition: ready for operation (used), Beckhoff CX2020-0120 CPU basic module SN:17924, used, minor signs of wear, 100% functional, scope of delivery as per photos Nledpfsrv Nz Uex Abueh

Condition: good (used), Year of construction: 2020, PLC controller, central assembly, RAM, CPU, central processing unit, central device Nljdpfx Ajxxvblebujh -Manufacturer: Siemens, SIMATIC S7-1500 CPU 1515-2 PN -Type: 6ES7 515-2FM02-0AB0 -CPU: 1515-2 PN -Quantity: 3x assembly available -Price: per piece -Dimensions: 125/70/H155 mm -Weight: 0.5 kg/pc.