Used Cross Milling Table for sale (44,802)

Condition: used, Controlled cross table, cross sliding table, clamping table, clamping plate with T-slots, clamping angle, cross table NC, linear robot, coordinate table Ndsdshtn Sbjpfx Ah Usf -Controlled cross table: was used as a soldering station -Manufacturer: Walko, cross table NC type PNC 500 -Table surface: 600 x 300 mm -Travel approx.: X 500 mm / Y 350 mm -Dimensions: 1050/1030/H1530 mm -Weight: 240 kg

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm Nedpfx Ahothuzpe Uedf - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm Nodpfstv H Ucjx Ah Ujdf z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system.

Condition: ready for operation (used), 1 used CNC bed milling machine with Heidenhain control system. Rotary table included. Ndodowxxzqopfx Ah Usf Further technical data will be added.

Condition: excellent (used), -COM 783- A stable universal precision T-slot table with horizontal mounting surface for smaller machine milling machines is offered here. Ndedpfxod Sf Ime Ah Ujf The machine table is made of solid machine casting Dimensions Table: (l x w ) 800 x 325mm Clamping area: 725 x 260mm Screw-on surface: 520 x 160mm (middle distance of the screw-on grooves approx. 50mm) Slots: 4 pieces longitudinally- running T- slots DIN 650 Nominal size 14 x 25

Condition: new, Optimum OPTIdrill DH 40CT column gear drilling machine with cross table 3034349 The versatile machines for milling and drilling. TECHNICAL DATA General information Tightening rod M 16 Dimensions and weights Column diameter 115mm Length (product) approx. 1060mm Width/depth (product) approx. 745mm Height (product) approx. 2090mm Weight (net) approx. 370kg Drilling capacity Drilling capacity steel (S235JR) 32mm Continuous drilling capacity steel (S235JR) 25mm Tapping capacity steel (S235JR) M 16 End mill size max. 25mm Cutter head size max. 76mm Drilling table Drilling table work surface length 730mm Drilling table work surface width 210mm Drilling table T-slot size 14mm Drilling table T-slots quantity 3 Drilling table T-slot spacing 63mm Load capacity drilling table 50kg Distance spindle - drilling table max.600mm Nedpfx Ahjt N Rkpo Ujdf Speed range Speed range 95 - 3200min¯¹ Number of speed ranges 2 x 6 steps Electrical data Drive motor power 1.1 / 1.5kW Supply voltage 400V Mains frequency 50Hz Machine base Distance spindle - machine base max.1180mm Machine foot working surface length 495mm Machine foot working surface width 375mm Machine foot T-slot size 14mm Machine foot T-slots quantity 2 Machine foot T-slot distance 230mm Machine foot length 670mm Machine foot width 470mm Spindle Quill stroke 120mm quill diameter 75mm Spindle holder MK 4 throat 280mm Drill head rotation 360 Drill head inclination 45° Manual quill feed Drill head height adjustment 260mm Travel distance Manual X-axis travel 480mm Manual Y-axis travel 180mm Manual Z-axis travel 560mm SCOPE OF DELIVERY Sprocket chuck 1 - 13 mm / B 16 T-nuts Adapter MK 4-MK 3 Arbor MK 4 / B16 Operating tool

Condition: good (used), Industrial Robot, Robot, Robotics, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Berger Lahr, robotics robot cross table -Servo motors: SER397/4L3SS0TO 3 pieces -Linear units: LM-A504KT100-250 / LM-H404K-700-LW230 / LM-P404KT100-1200 Ndodsi I Hdcspfx Ah Uef -Individual components: see photos -Traverse paths: x=670 / Y=360 / z= 1260 mm -Total dimensions: 1405/590/H1650 mm -Weight: 74kg

Condition: used, Cross table with mounted rotary table and stepper motor drive Rotary table, dividing attachment Precision positioning systems UHL Cross table UHL type KT5-NSOC Serial no.: 0008002 Table size: 145 x 145 mm Construction height: 62 mm Travel: 50 mm per axis Straightness/flatness: 5 μm - Drive per axis by 2-phase hybrid stepper motor, type ZSS 33.200.1,2 - Manual adjustment Dimensions (cross table) L x W x H: 200 x 200 x 62 mm Very good condition Rotary table UHL type B80 DT as dividing head Serial no.: 00080002 Ndedpjw E Nw Ajfx Ah Usf Rotary table: Ø 74 mm Construction height: 40 mm - Drive by 2-phase hybrid stepper motor, type ZSS 33.200.1,2 - Manual adjustment Dimensions (rotary table) L x W x H: 92 x 80 x 40 mm Dimensions with mounted rotary table L x W x H: 200 x 200 x 102 mm Weight: approx. 3 kg Very good condition

Condition: used, Year of construction: 1978, spindle diameter 105 mm x-travel 1250 mm y-travel 1000 mm z-travel 600 mm table length 1100 mm table width 900 mm tool adaptor 50 ISO / MK total power requirement kW weight of the machine ca. t CNC Table Borer, Reconditioned 2002, BOSCH CC 300 Nsdpfxst Hwtxs Ah Uodf

Condition: excellent (used), SCM internships in excellent condition Nedpfxst Hkq Ro Ah Uedf

Condition: new, Year of construction: 2025, functionality: fully functional, Cross table with precisely ground cast iron work surface. Equipped with T-slots which allow for workpiece fixture. Intended for processing, milling and drilling while preserving high precision due to a very accurate 0.02 mm vernier. Technical data Vice size 125 mm Base size 200×270 mm Table size 475×154 mm Transverse feed 150 mm Longitudinal feed 320 mm Vernier 0.02 mm Groove width 16 mm Screw spacing 175 mm Total dimensions 772×440×180 mm Weight 28 kg Nedpfxsvu Tnxs Ah Uedf

Condition: good (used), Year of construction: 1985, external dim. 1200x1050x1700 mm Worktable 1020x800 Tool shaft 30mm Nedpfx Aheivy Tfs Uodf Tool adjustment -10° do +45° Power 7,5 kW

Condition: good (used), Year of construction: 1991, spindle moulder, spindle moulder, wood milling machine -Manufacturer: SCM, table milling machine type T 110 A with table extension -Drive: 4 kW -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/8,000/10,000 rpm -Table extension: with stops on both sides see photos Njdpfjwhbthjx Ah Uodf -Dimensions total: 3600/910/H1610 mm / machine 2615/750/H1320 mm -Total weight: 550 kg

Condition: used, Univ. swivel-tilt-rotary table Add-on table for Univ. tool milling machine table size 630 x 250 mm Groove width 14 mm Rotatable and tiltable +/- 30 Ndedogp T D Nopfx Ah Usf Swiveling +/-45 - 4x T-slot Weight approx. 120 kg

Year of construction: 2020, condition: used, No. 3233 Cross milling machine Wema Probst QBV 200 Used, year of construction 2020 The machine is in mint condition, less than 30 holes have been drilled. The QBV 200 is designed for fitting cross milling and holes in both round milled or profiled logs. This machine permits to make perfectly adjusted connections in rounded logs by three-dimensional manual adjustment. Their fields of application are e.g. the angle joints for log cabin constructions, frame constructions or the wooden material for the “landscape architecture” e.g. fences, carports, palisades, flower boxes, raised-beds, guardrails etc. The cross milling machine consists of a base frame in welded steel construction with a swivel-mounted drilling device and gas spring-supported drilling column as well as an adjustment for the position of the drilling column. The wood is clamped with two centering vices. With the special tool (round saw), asymmetrical or end-face processing can be carried out. The machine can also drill 90° holes up to 120 mm diameter in wood by flat drill. Ndsdewt Abwopfx Ah Usf Accessories: Collet chuck with 25 mm diameter for the tool holder, without tools Wood diameter: 60 - 200 mm Adjustable range of tools: +/- 60° for 60 mm diameter range / +/- 45° for 80 mm - 140 mm diameter range / +/- 30° for 160 mm - 200 mm diameter range Motor capacity: 2.2 kW Number of revolutions: 1200 rpm Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm LWH Weight approx. 380 kg Sale on behalf of customer, from location near 46026 Valencia (Spain), without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: new, Year of construction: 2025, functionality: fully functional, 600x240 mm Cross Table Precise cross table with a screw guard, dovetail-shaped slide guides greatly improve table rigidity and prevent feed wiggling. Table description Cross table is well-made from high-quality materials Ndjdpfx Ahevu Trwj Ujf Supports working with drilling, milling machines, etc., providing perfect positioning during machining processes Screw guard protects the feed mechanism from chips An additional benefit of the table is the pitch which provides a preview of the X,Y axes position of the table 4 mm/0.02 mm vernier

Condition: used, Table milling machine, table milling machine -Spindle: comes from a Lubimez bench milling machine -Table milling machine: with rigid spindle -Dimensions: 800/800/H400 mm -Weight: 95 kg Nodscmh H Rjpfx Ah Ujdf

Condition: used, Cross table with stepper motor drive Precision positioning systems UHL Cross table UHL type KT5-NSOC Series no. 0008002 Ndsdpfx Ahjflrtpo Uof Table size: 145 x 145 mm Table opening: 75 x 75 mm Height: 51 mm Travel: 50 mm per axis Straightness / flatness: 5 μm - Drive per axis via 2-phase hybrid stepper motor, type ZSS 33.200.1,2 - Manual adjustment Dimensions (cross table) L x W x H: 265 x 220 x 51 mm Weight: 3.5 kg Very good condition

Condition: new, Year of construction: 2025, functionality: fully functional, Precise cross table with a screw guard, dovetail-shaped slide guides greatly improve table rigidity and prevent feed wiggling. Njdpfxsvu Tp Ae Ah Uodf Table description Cross table is well-made from high-quality materials Supports working with drilling, milling machines, etc., providing perfect positioning during machining processes Screw guard protects the feed mechanism from chips An additional benefit of the table is the pitch which provides a preview of the X,Y axes position of the table 2.5 mm/0.02 mm vernier

Year of construction: 1985, condition: used, Table milling machine, table milling machine -Table milling machine: with rigid spindle -Feed: -Speeds: 3000, 4500, 6000, 9000 rpm Ndjdpscnpxnjfx Ah Usf -Dimensions: 1400/800/H1480 mm -Weight: 600 kg

Condition: used, Universal swivel, tilting, and rotary table DECKEL Universal add-on table for tool milling machines suitable for FP 2L, FP 3L, or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with scale - Can be tilted to/from the machine +/- 15 degrees - Swivel range +/- 15 degrees - Swivel table, tilting table, angle table Permissible load max. 1000 kg Weight: 400 kg Ndjdpfx Aed E A I Neh Usf Good condition

Condition: new, Year of construction: 2025, functionality: fully functional, Precise cross table with a screw guard, dovetail-shaped slide guides greatly improve table rigidity and prevent feed wiggling. Table description Ndedpfx Ahjvu Uwue Usf Cross table is well-made from high-quality materials Supports working with drilling, milling machines, etc., providing perfect positioning during machining processes Screw guard protects the feed mechanism from chips An additional benefit of the table is the pitch which provides a preview of the X,Y axes position of the table 4 mm/0.02 mm vernier

Condition: used, Table milling machine, table milling machine Nodpfx Ahjcl Svvj Uedf -Table milling machine: with rigid spindle -Speeds: rpm -Motor power: kW -Dimensions: 1000/1870/H1040 mm -Weight: 560 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Precise cross table with a screw guard, dovetail-shaped slide guides greatly improve table rigidity and prevent feed wiggling. Table description of 185x100 mm Cross Table Cross table is well-made from high-quality materials Supports working with drilling, milling machines, etc., providing perfect positioning during machining processes Nodpfx Aovu Tqyjh Usdf Screw guard protects the feed mechanism from chips An additional benefit of the table is a pitch, which simplifies telling the X,Y axes position of the table 2.5mm/0.02mm vernier

Condition: new, Year of construction: 2025, functionality: fully functional, Precise cross table with screw cover, sliding guides made using the "dovetail" method significantly improve the stiffness of the table and enable the elimination of play in feeds. Description of the cross table The cross table is solidly made of high-quality materials. Ideally supports work on drilling machines, milling machines, etc., thanks to which we achieve precise positioning when boring or drilling. Cross table equipped with a swivel base with a 360°/3mm pitch. Nedsvu Tn Sepfx Ah Usdf Screw cover prevents chips from entering the feed working mechanism. An additional advantage of the table is a strip scale that facilitates constant viewing of the table's position in the X and Y axis Nonius 4 mm/0.02 mm