Used Crystal Prouduct Plant for sale (3,209)

Condition: new, Year of construction: 2023, functionality: fully functional, feed rate X-axis: 6 m/min, working width: 1,300 mm, total length: 4,885 mm, total height: 2,400 mm, total width: 3,780 mm, type of input current: three-phase, working height: 900 mm, input voltage: 380 V, input frequency: 50 Hz, energy consumption: 17 kWh, warranty duration: 12 months, DIMENSIONS OF PAINTED COMPONENTS The line will ensure good qualitative results under all operating conditions, provided that components with incorrect parameters are eliminated at the beginning, such as: • Bent, warped components; • Components with defects that would render them unsuitable for use even after painting. • Maximum length 2500 mm • Minimum length 350 mm • Maximum width 1300 mm • Minimum width 50 mm • Maximum thickness 60 mm • Minimum thickness 5 mm • Maximum deflection 10 mm • Average temperature 15-35 °C • Minimum temperature -5 °C • Relative humidity % • Operating speed 2 [2-3] m/min • Operating height 900 mm MATERIAL • Wood and wood-based materials END PRODUCT • Furniture • Outdoor furniture SHAPE • Shaped components TYPES OF PAINTS • Solvent-based paints Nedpfx Aozq Axzeazowl • Water-based paints FINISH • Transparent • Matte (< 25) • Pigmented • Semi-matte (30-40) MITO B2: MITO B2 SPRAYING AUTOMAT Spraying automat with 2 arms, dry air filtration system, and conveyor belt. Machine designed for continuous coating of various types of profiled panels. Spraying in continuous mode on any type of panel. No paint mist on the underside of the panels thanks to the 1650 mm conveyor belt. Robust machine construction. Excellent access to the interior through glazed areas, access doors, and retractable parts. Components are transported by a CFB belt transport system with a sealed edge, driven by a motor with a frequency inverter. The outer side of the belt is located outside the cabin to allow vapor containment. The axis is driven by a brushless motor and a toothed belt, ball bearings. Guarantees the best feed, acceleration and deceleration parameters, allowing for maximum coating quality. New and patented PLENUM (patented air diffusion system). Thanks to flow studies, better paint management (savings), better machine cleaning, and better coating quality are achieved. Unique management of component transport with precise speed control prevents soiling of the lower part of the components during acceleration/deceleration. Control electrical cabinet, located at the machine entrance on the service side, with electrical installation and connection channel to the machine. Wide, robust and efficient double-zone with a filter section. Flow regulated by a frequency inverter. Tanks with supports for Columbus filters Fire-resistant ATEX cat. 2G exhaust fan HCD type belt cleaning and paint recovery system. Perfect belt cleaning, maximum paint recovery ensured by the patented system from Cefla and the CFB belt with sealed edges. Cleaning system motor with inverter 1.50 kW. Easy access system, components removable from the front, ergonomic layout. Color and product change in seconds (including a spare set). 2 opposite arms with fixed holders for 4 guns, manual height adjustment. Spraying equipment (pumps, guns) and adaptations are not included in the offer. 2 paint feed circuits with element recirculation and paint filters. Stainless steel fittings.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale: a used CHP unit with few operating hours, hardly used. Natural gas. Details: see nameplates. Nwsdpfx Aszcwhvjazsl

Condition: used, Year of construction: 2006, operating hours: 5,126 h, functionality: unexamined, power: 3,500 kW (4,758.67 HP), overall weight: 43,200 kg, Complete oil-fat-fuelled cogeneration unit. ABC 16VDZC-1000 electric engine, AVK DIG150L-6 alternator. Complete system including supervisory management and all peripherals. The entire installation is still assembled as originally configured and can be inspected. Please contact via email. Nwodjy Hiuqopfx Aazol

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12389, Equipment: documentation/manual, We are offering this used FAT T1 regeneration system, manufactured in 2013. 1. Brief Description For sale is a thermal sand regeneration system from the German manufacturer FAT Förder- und Anlagentechnik GmbH. Nwedpfxozhvage Aazjl The system is currently in operation and is being sold solely due to a capacity expansion at the site. The sale is not due to any technical or economic deficiencies. The system has only been operated in a production hall and is in very good technical and visual condition. 2. Technical Data Manufacturer: FAT Förder- und Anlagentechnik GmbH Type: T1 Factory Number: 12389 Year of Manufacture: 2013 Fuel: Natural Gas Thermal Output: 350 kW Regeneration Temperature: approx. 850 °C Throughput: approx. 850 to 1,300 kg/h Sand System: PEP-SET / Cold Resin Systems Volatilization Loss: up to approx. 0.1% Installation: Production Hall Availability: Dismantling from mid-September 2026 3. Scope of Supply The scope of supply includes:  Frequency-controlled sand dosing via screw conveyor  Sieve  Magnetic Separator  Thermal Regeneration Furnace  Cooler Sand/Air Cooler (Recuperation) Air/Water Cooler Chilling Unit  Control Cabinet  PLC Control  Electrical Equipment  Pneumatic Components  Original FAT Documentation Not included in the scope of supply:  Dust extraction system, as it is connected to a central extraction system  Sand conveyor after the cooler The system is currently connected to the existing central dust extraction system of the plant. 4. Performance Features The system was designed for the regeneration of chemically bonded molding materials and achieves excellent regeneration results. Special Features:  Volatilization loss up to approx. 0.1%  High regenerant quality  Economical natural gas operation  Robust FAT construction  Proven industrial continuous operation  Complete technical documentation available 5. Documentation Scope The following documents are complete:  Operating Instructions  Maintenance Instructions  Circuit Diagrams  Pneumatic Diagrams  Installation Plans  Layout Drawings  Water Installation Plans  FAT Construction Drawings  Technical Documentation (2 folders) + Switchgear Planning The completeness of the documentation has been verified. 6. System Condition The system is in continuous production operation until dismantling. Advantages for the buyer:  Functional demonstration possible during operation  Inspection possible by appointment  Documented system condition  Weather-protected hall installation  Weather-independent dismantling and loading 7. Dismantling and Availability Dismantling is expected to be possible from mid-September 2026. The system is located inside a production hall and is very easily accessible for dismantling and loading operations. 8. Reason for Sale The system is being sold solely due to a capacity expansion at the production site. The existing system meets all technical requirements and is in functional condition. 9. Inspection Inspections and functional demonstrations are possible by prior appointment. Qualified interested parties will be provided with further technical documents, drawings and photo documentation upon request. If you have any questions or require further information, please send us a message or call us.

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, total width: 3,000 mm, total length: 3,000 mm, total height: 2,800 mm, IFP - KP 100 WTR Metal Degreasing and Cleaning System Key Specifications: - New system: Year of manufacture 2026 - Usable media: Water with cleaning additive - Basket dimensions (LWH): 670 / 480 / 300 [mm] - Throughput: approx. 4 batches/hour - Filling volume: 1130 liters - Connection power: 33 kW - Compressed air: 6 bar - System weight: 2600 kg System Equipment - Fully enclosed system design - Rotating and pivoting mechanism - Front loading - 3 x Flood pre-treatment tanks (heated) - 1 x Process filter cleaning tank - 1 x Process filter rinsing tank - 1 x Process filter rinsing tank 2 - Surface rinsing - Glass door - Electropolished work chamber - Oil separator - Hot air drying - Vacuum drying - Sliding table with two positions - Dosing system for cleaning agents - Ultrasonic 1 kW / 25 kHz (power adjustable) - Spraying via four nozzles Nodpfxszf Hp Ts Aazjwl - 12" touch panel - Automatic water replenishment

Condition: good (used), Year of construction: 2015, functionality: fully functional, Reverse Osmosis Plant for ethylene glycol recovery, with a 12 m³ raw-water storage and homogenisation tank, nominal feed flow rate of 4 m³/h at 4 bar and filter backwash flow rate of 11 m³/h at 1.5 bar. Includes an automatic downflow multimedia filter with anthracite and sand beds supported on gravel, designed to remove suspended particles and protect the membranes. Compact skid-mounted reverse osmosis unit with two-stage filtration using replaceable 20- and 5-micron cartridges, a variable-speed high-pressure pump and a two-stage (1+1) × 6 reverse osmosis membrane configuration. Equipped with 8-inch DOW spiral-wound aromatic polyamide membranes installed in GRP pressure vessels rated up to 1,000 psi. Nominal recovery rate: 90%, equivalent to a theoretical permeate production of approximately 3.6 m³/h under design conditions. Low- and high-pressure piping and interconnections manufactured from AISI 316L stainless steel. Includes recirculation, front and side permeate collection, a CIP chemical cleaning system, membrane flushing, a GRP solution-preparation tank, a 25-micron mesh microfilter and a delivery pump for cleaning solutions and permeate water. Automated control system based on a Siemens S7-200 PLC, providing measurement and control of flow rates, temperature, pressures, pressure drops, operating times, pumping, backwashing, flushing and process alarms. Operator panel with a 6-inch colour touchscreen for parameter display and configuration, start/stop control, filter washing, alarm monitoring and trend graphs. Includes a 2 m³ reverse osmosis reject-water tank for subsequent transfer to the evaporator. Serial No.: MPP51525. Njdpjzvddcsfx Aazowl

Condition: used, functionality: fully functional, Year of construction: 2003, RC rotary dryer, Ammann - Burner: Oertli / 9.74 kW Year of manufacture: 2003 Nwedpfozxbihex Aazjl Complete steel construction

Condition: used, Year of construction: 2008, functionality: limited functionality, power: 150 kW (203.94 HP), nominal heat output: 250 kW (339.91 HP), heating capacity: 220 kW (299.12 HP), Fixed-bed wood gasification plant from Urbas. The system is operational. Scope includes engine and generator. The engine requires an overhaul. Also included is a valid EEG feed-in contract at 21.6 cents/kWh until 2028. A comprehensive stock of spare parts, such as side channel blowers, sensors, and pumps, is included. A second unit is provided as a parts donor. Nwsdpeyyzv Tofx Aazsl

Condition: good (used), Year of construction: 2015, total width: 1,700 mm, total length: 4,700 mm, total height: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, We offer this Novatec PLURITANK 550 ultrasonic cleaning system in good condition, manufactured in 2015. Nedszy R Rkepfx Aazjwl 1) Overall dimensions of the system: 4700 x 1700 x 1500 (h) mm 2) Total installed electrical power: 53 kW 3) Supply voltage: 400V - 3 phases + N + PE - 0 Hz 4) Dimensions of the tanks: • Tank 1: “Ultrasonic cleaning tank in hot aqueous detergent solution”  1450 x 1150 x 1500 (h) mm (capacity 620 L) • Tank 2: “Hot hydrokinetic rinsing tank for immersion in tap water with passivating agent”  1200 x 1150 x 1500 (h) mm (capacity 580 L) • Tank 3: “Hot air recirculation drying oven”  1200 x 1150 x 1500 (h) mm (capacity 580 L). If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 1992, HTI thermal oil heating system in a 20" container - 1,600 liter capacity - 320 kW - Flow temperature 300 °C AB 1000 high-temperature boiler - 1,000 liter capacity - Year of manufacture 1978 Weishaupt burner - Type WL40Z-A The system is operational and in good, used condition. Subject to prior sale and errors. System location: Germany - 02943 Boxberg, OT Nochten, Upper Lusatia Nwsdpfswlim Dex Aazjl

Condition: used, Year of construction: 2000, functionality: fully functional, feed rate X-axis: 40 m/min, works good! Nwodjymtikopfx Aazel

Condition: good (used), Year of construction: 2006, Complete Ermont asphalt mixing plant AE feeders: 2005 Ermont drum: 2006 ERMIS control station: 2011 Nsdpfx Aoxuwurjazewl Capacity: 170 tonnes/hour

Condition: new, Protection level 4 - 12 M Power supply 2 x CR2032 weight 460 Gramm dimensions 250 x 270 x 230 mm Nedpfx Aaogu Ey Hozswl

Condition: excellent (used), Year of construction: 2022, operating hours: 326 h, functionality: fully functional, machine/vehicle number: A20221005, feed length X-axis: 5,500 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 100 mm, feed rate X-axis: 3 m/min, workpiece weight (max.): 500 kg, working width: 1,300 mm, type of input current: AC, volume flow: 12,000 m³/h, suction capacity: 6,000 m³/h, compressed air connection: 6 bar, A fully automatic coating system in excellent condition is offered for sale, consisting of the following components: 1 -----VEN SPRAY SMART Spray System----- Year of manufacture: 2019 Feed speed: 1.5-4.0 m/min Working speed: 2.0 m/min Working height: 920 ± 20 mm Working width: 1,300 mm Min. workpiece size: 300x100x10 mm Max. workpiece size: 3,600x1,200x50 mm Coating material: Water-based paints, solvent-based paints Spray process: Air, Airmix, Airless 326 operating hours 2-----VEN MOVE TRANSFER----- Type: VEN MOVE TRANSFER 180° Year of manufacture: 2022 Length: approx. 6000 mm Width: approx. 8,078 mm Speed: 3.2 m/min Max. load: 20 kg/m 766 operating hours 3 -----VEN TRANS BELT (x3)----- Type: VEN TRANS BELT belt conveyor Year of manufacture: 2022 Length: approx. 5,635 mm Outer width: approx. 1,511 mm Working width: approx. 1,300 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m 766 operating hours 4 -----VEN TRANS BELT with dust protection hood----- Type: VEN TRANS BELT belt conveyor Year of manufacture: 2022 Length: approx. 3,800 mm Working width: approx. 1,300 mm Working height: 920 ± 20 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m 5 -----VEN MOVE TRANSFER with drying chamber----- Type: VEN MOVE TRANSFER with drying chamber Year of manufacture: 2022 Length: approx. 6,000 mm Width: approx. 8,078 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m Drying chamber: Manufacturer: Adolph & Co GmbH Min. exhaust air volume: 1,200 m³/h 6 -----Supply air unit HC12----- Manufacturer: Berliner Luft Recirculation air volume flow: max. 12,000 m³/h Max. heating temperature / heating capacity: 70°C / 174.14 kW Nwsdszcmy Uspfx Aazol 1620 operating hours -----Technical Features----- - Fully automatic coating process - Multi-layer coating programmable - Automatic control of the entire coating process - 6 freely programmable spray guns - Suitable for water-based and solvent-based paints - Suitable for automated coating processes in industrial applications The system was installed in 2022 and was in operation for only about 1 year (326 operating hours in the spray gun drive). It is in very good condition, is fully documented and is ideal for industrial coating processes with high quality requirements. The original investment value in 2022 was approximately €760,000. The selling price is negotiable.

Condition: used, mileage: 365,770 km, power: 294 kW (399.73 HP), gearing type: mechanical, fuel type: diesel, color: white, overall weight: 40,000 kg, empty load weight: 13,000 kg, maximum load weight: 27,000 kg, tire size: 315/80R22.5, axle configuration: 8x4, number of seats: 2, first registration: 03/2013, emission class: euro5, brakes: engine braking, suspension: steel-air, driver cabin: sleeper cab, wheelbase: 3,600 mm, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, hydraulics, low noise, onboard computer, parking heater, power assisted steering, seat heater, Vehicle location: Bovenden, Lg. Haus, 1x comfort seat, 1x sleeper bunk, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heater, 16-speed manual transmission, ABS (anti-lock braking system), constant throttle, PTO, differential lock, fog lights, leaf-air suspension, aluminum fuel tank, low-noise G1, roof hatch, green environmental sticker. Wheelbase: 3600 mm. Superstructure: complete tractor with HOENKHAUS semi-trailer 10/5/F/ZA-1800 with KARRENA concrete mixer approx. 10m³ HydrDrive, gearbox ZF 16 S 252 OD, MAN BrakeMatic, L-cab, auxiliary heater, air conditioning, tank capacity: 400 liters. Trailer: 2x 10t BPW axles, air suspension, 1st axle liftable. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Nodexg Iq Iepfx Aazswl

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Nsdpfjzg Dx Uox Aazewl Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Year of construction: 1970, condition: ready for operation (used), Throughput capacity milk, cocoa: 600 kg/h, components: Instantizer (main process chamber), F-10 atomizer, Vibroflux eccentric element, steam air heater, air heater, ceiling air distributor, DDMM centrifugal pump, washing sluice, material feed sluice, hopper discharge device, Allgaier tumbler screening machine, Aerzener rotary lobe blower, Haug compressor unit, Gericke vertical conveyor, Amer-glas prefilter with DRI-Pak fine filter, electrical equipment, main wiring diagram, electric hammers, chamber safety system with vacuum monitor, Varimax control system, Clorius temperature controller, Variadyn motor control system, plant has been stored dry for 10 years, completeness of the plant cannot be guaranteed, major components are available, without control cabinet, extensive documentation and spare parts, no known defects, operating hours unknown, an on-site inspection is possible. Nodpfxszghflo Aazowl

Condition: ready for operation (used), Year of construction: 2012, Heating output: 275kW, electrical output: 201kW, fuel: natural gas, engine: MTU E 3066 L3, engine cylinders: 6, overall efficiency: approx. 82%, generator rating: 276kVA, machine dimensions X/Y/Z: approx. 3550mm/1800mm/2100mm, weight: approx. 4500kg, operating hours: approx. 57557h. Documentation available. An on-site inspection is possible. Nwjdpfx Aajzk I U Ujzjl

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional No. 1 Infeed roller tracks (ca.) 32,000 mm Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 190 Nwjdpfjvnq H Eox Aazel Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 ( Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min 2° Rear-pusher, with No. 14 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 (Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels: N° 2 x Liftomat HAU-A 25/12 Automatic Stacking System with 8 stations

Year of construction: 2018, condition: ready for operation (used), Suitable for grinding calcined coke, feed material diameter: 0-20mm, moisture feed material: under 0.1%, measurement: NEA Malvern analysis, with pendulum mill, automatic filling station, BigBag unloading station, dust filter, pipe chain conveyor, transition piece, metal separator, bunker, two-way distributor, dosing sluice, control cabinets, steel construction, documentation and additional elements, the system is still in its original packaging and has been stored for two years. Njdpfxenxk Ixs Aazowl

Condition: ready for operation (used), Year of construction: 2012, A complete carton sealing and conveyor line (packing line) is available. 1) Carton sealing machine Soco T-10, year of manufacture: 2012, sealing capacity: 30 cartons/min, working height range: 620mm-720mm, adhesive tape overlap: 70mm, max. adhesive tape roll diameter: 385mm, min. carton dimensions X/Y: 90mm/80mm, max. carton dimensions X/Y: 515mm/520mm, machine weight: approx. 200kg. 2) Bottom flap folder Soco F-100-5, year of manufacture: 2012, carton width range: 190mm-240mm, max. carton length: 620mm, machine dimensions X/Y: approx. 460mm/895mm. 3) Conveyor technology consisting of roller conveyors and plastic rollers, roller diameter: 48mm, roller conveyor length: 2500mm, roller conveyor width: 300mm, center distance: 60mm. 4) Weighing system Rhewa 82 basic, max. weighing capacity: 150kg. 5) Lift table Ecoline U-shape, platform dimensions X/Y: 1450mm/1140mm, max. load capacity: 1000kg, max. lifting height: 760mm. 6) Vacuum tube lifter J. Schmalz Jumbo Sprint 45-Zent, year of manufacture: 2003, load capacity: 45kg, max. lifting speed: 60m/min, max. lift: 1800mm, suction cup diameter: 110mm, lifting column inner diameter: 140mm, length: 2550mm, gripper height: 112mm, suction cups: 4, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Nodpfjx I Rqvox Aazewl

Year of construction: 2014, condition: ready for operation (used), An industrial Pyreg pyrolysis plant for the thermochemical utilization of biogenic residual materials is available. Fuel capacity: 500kW/module, max. fuel throughput capacity per module: 1375kg/year, min. fuel lower heating value on dry basis: 10MJ/kg, max. fuel moisture content: 50%, biochar production: 40kg/h, thermal heat output (exhaust gas heat): 150kW, power consumption: approx. 7.5kW. Plant dimensions X/Y/Z: approx. 9000mm/3000mm/3000mm, weight: approx. 10000kg, control system: PLC. Documentation available. An on-site inspection is possible. Njdjx Sywgepfx Aazjwl

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Njdpfxexc Ni Ro Aazewl

Condition: ready for operation (used), Year of construction: 1997, A boiler system with underfeed firing is available. Heating capacity: approx. 2300kW. An on-site inspection is possible. Nwjdpfxsxwcuvs Aazjl

Condition: ready for operation (used), Year of construction: 1989, An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available. Nwodpfx Asucfwpeazsl