Used Cut Length for sale (39,799)

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser type: CO₂ laser, laser power: 5,000 W, Equipment: cooling unit, nozzle changer, - Laser power: 5000 watts. - Year of manufacture: 2010 - Thin sheet productivity package Gbodpfx Aozq S Edeayst - Nozzle changer - Transverse conveyor - Tilting container for transverse conveyor - LiftMaster Store - Extended sorting system (1000 x 600) - Extended part removal for parts from 600 x 600 - Integrated sheet alignment - Single-sheet separation - Sliding gate, two-leaf - SortMaster - Rotating unit + extended part removal 1000 x 600, infinitely adjustable - Additional gripper for long parts - Extended magnetic suction system - TruStore 1030 - Infeed/outfeed station with trolley - 10-level compartment, 90 mm + pallet - 5 pallet bases - Column cladding - Storage interface

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Reel MHR 2.5 / 1250 + Straightening Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot The system will remain in operation until week 35. The system has been continuously maintained and partially overhauled in 2022. Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. Output Power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability relative to rated power: ±2% Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Reel MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and Speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical Connection Connection voltage: 3 × 400 V Frequency: 50 Hz Noise Emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening Machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rolls: 7 Number of tension rolls: 2 Roller diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Passing height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Gsdpjzu Avzjfx Aayobt Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positioning repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist rotation): ±200° B-axis (wrist bending): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If collection is not carried out on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for printing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2022, SENFENG SF3015HM – 4kW Combination Fiber Laser – 2022 The SENFENG SF3015HM, year 2022, is a versatile combination fiber laser cutting machine for both sheet metal and tubes/profiles. The machine originates from a company bankruptcy and will be supplied by Besten Machines after a complete inspection and maintenance service. Installation and commissioning at the customer's location can also be provided. Equipped with an Raycus 4,000 W fiber laser source, Raytools BM06K FL200 cutting head and KaiSen KSDC-8604A1 extraction system. Year of manufacture: 2022 Guide price: €85,000 EXW Haarle (NL) or Büren (DE). Main Features Gbedpfxszwqw Se Aayst Combination machine for sheet and tube cutting Year of manufacture: 2022 3,000 × 1,500 mm exchange table Tube processing up to 6,000 mm IPG YLR 4,000 W fiber laser source Raytools BM06K FL200 cutting head CypCut software for sheet cutting TubePro software for tube cutting Fully enclosed machine CNC-controlled extraction zones KaiSen KSDC-8604A1 extraction unit included Water chiller and power stabilizer Automatic lubrication system Wireless remote control Technical Specifications Model: SENFENG SF3015HM Year of manufacture: 2022 Laser power: 4,000 W Raycus Sheet working area: 3,050 × 1,525 mm Z-axis: 220 mm Exchange table: 3,000 × 1,500 mm Tube length: 500–6,000 mm Square profiles: 15 × 15 – 150 × 150 mm Maximum profile range: up to 220 × 220 mm Maximum acceleration: 1.0G Maximum simultaneous axis speed: 130 m/min Positioning accuracy: ±0.05 mm/m Repeatability: ±0.02 mm/m Maximum sheet weight: 700 kg per table Power supply: 380 V / 50 Hz Machine dimensions: approx. 8,480 × 3,735 × 2,255 mm Machine weight: approx. 9,304 kg Cutting Capacity Sheet metal: Steel S235: up to 20 mm Stainless steel: up to 10 mm Aluminium: up to 4 mm Tube & profiles: Steel S235: up to 8 mm Stainless steel: up to 6 mm Aluminium: up to 4 mm KaiSen Extraction System The included KaiSen KSDC-8604A1 extraction unit has a capacity of approx. 6,800 m³/h and is equipped with four self-cleaning filter cartridges, spark pre-filter and automatic blowback cleaning. Condition & Delivery Year of manufacture: 2022. The machine originates from a company bankruptcy and will receive a complete maintenance service and technical inspection before delivery. Installation and commissioning by Besten Machines at the customer's location can be provided upon request. Guide price: €85,000 EXW Haarle, Netherlands or Büren, Germany. An attractive opportunity for companies looking for a modern 4kW combination fiber laser for both sheet and tube processing at a significantly lower investment than a new machine. Contact Besten Machines for further information, availability, inspection or an installation quotation.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Gbedpozizkysfx Aayot Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: new, Year of construction: 2023, functionality: fully functional, table length: 1,500 mm, table width: 3,000 mm, workpiece height (max.): 150 mm, control type: CNC control, TECHNICAL DETAILS Workpiece thickness max.: 150 mm Plasma cutting range: 0.5 to 60 mm Recommended cutting range: 0.5 to 40 mm Maximum penetration depth: 30 mm Table width: 3,000 mm Table length: 1,500 mm Torch heads: 1 Feed rate: 20,000 mm/min Vertical adjustment: 400 mm MACHINE DETAILS Control system: CNC Filter area: 100 m² Fan capacity: 4,500 m³/h Motor power, extraction: 5.5 kW Current consumption: 11.5 A Noise level: 75 dB(A) (+ max 10 dB(A) during cleaning pulse) Intake nozzle: DN 250 mm Total power requirement: 15 kVA Connection voltage: 400V/50 Hz or 480V/60Hz Type of current: 3Ph+N+PE Space requirement: approx. 4.5 x 2.5 m Frequency converter: EATON, located on the left in the attached control cabinet Fan arrangement: on the machine, including sound-absorbing duct bend, right side EQUIPMENT Heavy-duty machine bed with precision guides Ball-bearing transverse carriage Thermal separation of drive and cutting area Automatic height detection and torch height control Torch holder with collision protection 3-sided access to the cutting area SATOTEC extraction table Kjellberg Q1500 power source Fully automatically controlled plasma gas console Q-Gas Lantek Expert Cut CAD/CAM module TEKA EcoCube extraction system Automatic filter cleaning (PLC) Compressed air connection and condensate drain Gsdpjzlg E Isfx Aayebt Grounding bolt Cables in UL design

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2325 08 1323, sheet thickness (max.): 200 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 6,050 mm, No minimum price – guaranteed sale to the highest bidder! The machine's control system was renewed in 2021! Flexible gantry machine for plasma and oxy-fuel cutting TECHNICAL DETAILS Track gauge: 3,100 mm Working length: 6,050 mm Torch carriage Actual number of torch carriages: 1 Number of torch carriages: max. 2 Cutting performance Cutting thickness with standard torch: max. 200 mm MACHINE DETAILS Overall width: 4,610 mm Overall length: 8,000 mm Drives: AC servo motors with planetary gears Mains voltage: 3 × 400 V / 50 Hz Extraction and filter technology - CNC-controlled extraction tables - Cartridge filter systems with pneumatic cleaning Gbsdpozm I Slefx Aayst Cutting test according to EN 1090 Test according to EN 1090-2:2018+A1:2024 Date of last test: March 7, 2025 Tested by the Belgian Institute of Welding (BIL) Tested material grades: S355 / S690 QL1 Execution class according to EN 1090-2: max. EXC 4 Cutting test report available on request EQUIPMENT - Lincoln Burny Phantom II software - High-performance servo motor MTI Motion’s Brushless T0851 - Cutting torch head with control and oxy-fuel torch IHT M4000 - Automatic height control

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 174688 € 3301.6 € 3 kW Manueller Tisch 16 mm 8 mm 8 mm 5 mm 8 mm 3060 x 1530 mm 3060 mm 1530 mm 140 mm 3048 x 1524 mm 160 kg/m² 90 m/min 90 m/min 127 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm The HD-FO is our compact entry-level model. Control, laser source and cooling are integrated into the systemto keep the overall dimensions as small as possible. The manually extendable table is moved out of the side of the machine for loading and unloading. The cutting head has automatic focus adjustment. This makes the system a particularly economical, fast and very easy to operate production machine. The system consists of the following components: Manual loading and unloading table Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium DRM-8 F150 Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software LANTEK for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Slug box Working area lighting Multi-chamber suction system Remote maintenance access Aircondition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 4 kW 6 kW Mild steelS235 20 25 Stainless steel(304) 10 15 Aluminium (5083) 12 20 Gbsdpfx Aaox U Elheyet Copper 6 10 Brass(CuZn39 Pb3) 10 12 OPTIONS: Suction unit with filter Shuttle table

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 269588 € 3 kW Wechseltisch 16 mm 8 mm 8 mm 5 mm 8 mm 29,9 (mit Absaugung) kW 6100 x 2070 mm 6100 mm 2070 mm 125 mm 6096 x 2032 mm 240 (für 3 - 12kW) / 400 kg/m² 5800 (für 3 - 12kW) / 960 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 42 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software Lantek for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Air condition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 4 kW 6 kW 12 kW 15 kW 20 kW Mild steelS235 20 25 30 35 40 Stainless steel(304) 10 15 25 35 40 Aluminium (5083) 12 20 30 35 40 Copper 6 10 15 15 Gedex U Elnopfx Aayobt 15 Brass(CuZn39 Pb3) 10 12 20 20 20 OPTIONS: Suction unit with filter Automatic nozzle change

Condition: used, Year of construction: 2006, operating hours: 107 h, functionality: fully functional, machine/vehicle number: 365591, working range: 4,250 mm, travel distance X-axis: 2,200 mm, travel distance Y-axis: 4,250 mm, travel distance Z-axis: 200 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 100 mm, FLOW Waterjet Cutting Machine IFB-12 – Waterjet System We are selling our Flow waterjet machine with an additional special stainless steel water tank. Food-grade / Industrial / Chemical applications The machine has been in use with us for 2 years. No emergency sale – being sold due to purchase of a new machine. The system is in very good condition Fully functional Manufacturer: Flow Year of Manufacture: 2006 Type: IFB Model: IFB 12’ Base Serial No.: 365591 Laser type: Renishaw Gedpjy D A Ifsfx Aayobt Transport dimensions Forklift pockets: 17x10 cm Total height: 220 cm Total width: 480 cm Total length: 450 cm Tank Length: 425 cm Width: 255 cm Data sheet for the machine is available (PDF upon request) Inspection before purchase is possible and encouraged. Delivery available on request. Sale as-is in condition shown in the pictures.

Condition: repair required (used), Year of construction: 2007, operating hours: 67,367 h, functionality: not functional, machine/vehicle number: W288, repeat accuracy: 0.01 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, input voltage: 250 V, sheet thickness aluminum (max.): 100 mm, table length: 3,000 mm, operating speed: 6,000 mm/s, table width: 1,500 mm, tank capacity: 5,500 l, pressure: 3,600 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 2 m/min, table height: 1,000 mm, operating pressure: 3,600 bar, year of last overhaul: 2024, waste water connection: 50 mm, input frequency: 50 Hz, power: 120 kW (163.15 HP), controller manufacturer: Bystronic, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: safety light barrier, Bystronic Byjet 3015 Waterjet. This machine has a 3000 x 1500 cutting table up to 200mm thickness, complete with two cutting heads. The waterjet is powered by a Bypump 50 APC hydraulic unit. This machine was regularly serviced by a Bystronic service engineer. This machine is being sold as as a spare parts machine, but could be easily put back in production. It has a new hydraulic pump fitted shortly before it was taken out of production. It comes complete with a chain conveyor with paddles for the automatic removal of used garnet from the cutting beds. It also comes with an air blower and reservoir tanks for the raising and lowering of the water levels in the cutting bed for reducing the noise levels during the cutting process. Gbodpfx Aaezlt Ayjyjt

Year of construction: 1999, condition: ready for operation (used), Track height: 500mm, track length: 14,000mm, cutting length: 12,000mm, cutting width: 3000mm, cutting thickness: 150mm, table height: 700mm, connected load: 2kVA, length: 2250mm, height: 1900mm, width: 5270mm, weight: 2.5t. The machine is not functional, but mechanically in order. The computer still runs under Windows XP and needs a new program. With documentation, without accessories. On-site inspection is possible. Gbedeuui Ecjpfx Aayjt

Year of construction: 2006, condition: ready for operation (used), A CNC laser cutting system Bystronic is available. Laser power: 2200W, max. sheet dimensions X/Y: 3000mm/1500mm, travel path X/Y/Z: 1562mm/772mm/100mm, max. material thickness mild steel/stainless steel/aluminium: 8mm/6mm/4mm, positioning accuracy: +/-0.1mm, simultaneous speed: 140m/min, load capacity loading table/cutting table: 300kg/80kg. Machine dimensions X/Y/Z: approx. 6250mm/6000mm/2150mm, laser source dimensions X/Y/Z: approx. 1900mm/950mm/1250mm, weight: approx. 13500kg. Including combined cooling and filtration unit WKL 300-F. Dokumentation vorhanden. An on-site inspection is possible. Gbsdpfxexx Ud Ss Aayet

Year of construction: 2003, condition: ready for operation (used), Travel path X/Y/Z: 3000mm/1500mm/115mm, laser power: 5000W, cutting capacity mild steel/stainless steel/aluminium: 25mm/20mm/12mm, travel speed: 200m/min, cutting accuracy: 0.1mm. Machine dimensions X/Y/Z: 11000mm/4600mm/2400mm, weight: 12000kg, control: Siemens Sinumerik 840D. Includes conveyors, laser cutting heads with various lens sizes, Liftmaster R, and other peripheral equipment. Documentation available. An on-site inspection is possible. Godpsxaph Ujfx Aaysbt

Year of construction: 2010, condition: ready for operation (used), For sale is a CNC laser cutting machine from TRUMPF. laser power: approx. 3000W (3kW), working area: X/Y/Z 3000mm/1500mm/115mm. Additionally, a suitable Liftmaster from the year 2015 is offered, which can also be purchased separately. Gedpfx Aaoxxa Ucjysbt

Year of construction: 2006, condition: ready for operation (used), A Precicut CNC laser precision machining system is available. 1) Fiber laser IPG Photonics YLR-150/1500-QCW-MM, year of manufacture: 2012, average laser power: 150W, pulse power: 1.5kW. 2) Collimator d25 f50, year of manufacture: 2012, focal length: 50mm, diameter: 25mm. 3) Coupling module for BAK 4, year of manufacture: 2012. 4) ProCom CNC300 control unit. Documentation available. On-site inspection is possible. Gedpfxewqqwbj Aayobt

Year of construction: 2015, condition: ready for operation (used), A complete CNC CO2 laser cutting system Bystronic is available. Working dimensions X/Y: 4000mm/2000mm, travel path X/Y/Z: 4060mm/2030mm/1700mm, max. simultaneous speed: 84m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.05mm, max. table load: 1500kg, weight: approx. 18500kg, operating hours: 29456h. Laser source: Bystronic ByLaser 6000, laser type: CO2, laser power: 6kW, wavelength: 10600nm, polarization: circular, pulse frequency: 1-2500Hz, max. cutting capacity steel/stainless steel/aluminum: 25mm/25mm/15mm, weight: approx. 1800kg, laser hours: 10275h. Documentation available. An on-site inspection is possible. Gjdpey D Trnjfx Aayobt

Year of construction: 2006, condition: ready for operation (used), A CNC punching and laser cutting system Amada is available. Laser resonator: C-4000A, travel path X/Y: 2500mm/1250mm, laser power: 4kW, laser type: CO2, max. laser gas pressure: 4bar, max. cutting capacity: steel/stainless steel/aluminum: 25mm/15mm/10mm. Machine dimensions X/Y/Z: approx. 5700mm/2500mm/2300mm, weight: approx. 6400kg, control system: Amada. Including transformer TG515 (70kVA), cooling block, extraction system Keller Vario and beam path purging system Alphapac. Documentation available. An on-site inspection is possible. Gbedpfx Asy Rtf Ujayet

Condition: used, machine/vehicle number: 12479, Rotor diameter: 300 Rotor width: 600 Rotor knives: 6 Stator knives: 2 Inlet cross-section approx. 519×316 Drive motor: 18.5 kW Pneumatic tilting device for upper housing section Gedpfx Aajyr Ttmjyebt Without control cabinet and electrical wiring (can be provided for an additional charge). Spare parts and additional plant components are available.

Condition: used, machine/vehicle number: 11058, 3-blade rotor 8 rotor blades (staggered) 2 rows of stator blades Rotor diameter: 200 mm Rotor speed: approx. 900 rpm Working width: 880 mm Gbodpfxeyr Th Ds Aayjt Inlet cross-section: approx. 130 x 845 mm

Condition: used, machine/vehicle number: 13064, Rotor diameter: 450 mm Gbsdpfx Asyr Tt Tjayst Rotor width: 600 mm Number of rotor knife rows: 5 Number of stator knife rows: 2 Feed opening approx. 600×600 mm Drive motor: 55 kW

Condition: used, machine/vehicle number: 12916, Rotor diameter: 350 mm Gsdpfx Aasyr Trpoyobt Rotor width: 450 mm Rotor blades: 3 Stator blades: 2 Inlet cross-section approx. 350 x 450 mm Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 13277, Rotor diameter: 320 mm Rotor width: 440 mm Rotor knives: 3×2 Gjdoyr Txvjpfx Aayebt Stator knives: 2 Feed opening approx. 450 x 300 mm Drive motor: 11 kW

Condition: used, machine/vehicle number: 13253, Rotor diameter: 800 mm Rotor width: 1200 mm Rotor knives: 7 rows Stator knives: 3 rows Inlet cross-section approx. 1200 x 800 mm Gbodpfx Asyr Txpoayet Drive motor: as per customer request

Condition: used, machine/vehicle number: 008505, Position 1: Front-Loading Panel Saws HOLZMA-HPP 350/43/43 - HEE 38/22 Gbodpfx Aoy Hcd Soayjt Position 2: Lift Table HOLZMA-HPP 350/43/43 - HEE 38/22

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment, two-jaw thread cutting chuck -Manufacturer:Röhm, two-jaw tapping chuck MK3 Gedpjxdw Svsfx Aayjbt -Type: MK3 B24 -Tool holder: square up to 24 mm see photos -Dimensions: Ø 85 x 245 mm -Weight: 4.4 kg