Doosan dx 255 lc for sale

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6

Crawler excavator Doosan DX 225 LC-5

Sittard, NetherlandsNetherlands dealership location
6331 km
2017
used
Colour: Orange Field of application: Construction Nnmsf Power: 124 kW (169 HP Empty weight: 22.100 kg Make of engine: DL06 CE mark: yes Serial number: V001 EPA marked Transport dimensions (LxWxH): 9.5 x 2.99 x 2.98 more
2

Crawler excavator Doosan DX 235 LCR-5

Sittard, NetherlandsNetherlands dealership location
6331 km
2017
used
Field of application: Construction Twejaxc EPA marked more
4
Unused 2018 Doosan DX225LC 600mm Pads, CV, Piped c/w ROPS, Saftey Rails, Reverse Camera, A/C Vsqwgy This machine will be sold by Euro Auctions at an online only auction in Brisbane, Australia. Bidding closes 25th July at 4pm AEST. View full inventory online. more
4
Gildemeister CTX 400 Support / claw grips / truss by a Doosan MobilBagger with a total weight of approx. 16 19to. The attachment is almost unused and was dismantled due to mounting a track landing gear immediately after the purchase of the excavator. It can be mounted instead of the space shield. The exact year of manufacture and the type of the baggers are not known. N83ymlcr More info on request more
6

Wheel excavator Doosan DX 165W-5

Sittard, NetherlandsNetherlands dealership location
6331 km
2018
used
Colour: Blue Field of application: Construction Drive: Wheel Power: 102 kW (139 HP Empty weight: 17.916 kg Make of engine: Perkins 1204F CE mark: yes Technical condition: very good EPA marked Front tyres / undercarriage remaining: 95 Be7q3wr2nt Rear tyres remaining : 95 Transport dimensions (LxWxH): 7.94 x 2.49 x 3.1 Latest inspection: 5 more
10
Indramat-PLCB06-02-FW 255868 INTERBUS module, serial number according to the photo, used, normal wear, 100% functional, included with com. photos Uxk0edoz more
6

CNC TURNING CENTER DAEWOO-DOOSAN PUMA 240 LC

Bienne, SwitzerlandSwitzerland dealership location
6604 km
2005
used
CNC TURNING CENTER "DAEWOO-DOOSAN" TYPE PUMA 240LC Fanuc 21i-TB - mfg. 2005 Cajihpvna 9965 h under power ; 1210 h work more
1

Mini excavator Doosan DX 27 Z

Obrigheim, GermanyGermany
6618 km
2013
good (used)
further on request Vsoe2u more
2

Wheel excavator Doosan DX 165 W - 5

Sittard, NetherlandsNetherlands dealership location
6331 km
2017
used
Field of application: Construction Drive: Wheel Bbzijdb EPA marked more
6

CNC-LATHE DOOSAN DAEWOO PUMA 300 LC

Bienne, SwitzerlandSwitzerland dealership location
6604 km
2007
used
CNC-LATHE "DOOSAN" TYPE PUMA 300 LC Srmxkbn9t Fanuc 21iTB - 10 posts turret - 3-jaws chuck - tailstock - chips conveyor - workpiece feeler more


doosan dx ...
daily

New machines via email!

Stay updated!
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Saxgtfgf SELCO - WNT 600, [...] Load, Automatic Panel Saw. -- Specifications: 175" (4,450 mm) Overall cutting length, 4.8" (122 mm) max. saw blade projection; 30 HP (22 kW) main & 3 HP (2.2 kW) scoring motor. -- Saw Carriage: Variable saw carriage travel speed from 16 - 492 FPM (5 - 150 MPM). -- Pusher System: (10) Clamps (open up to 4.8" / 122 mm); of which (3) are closely spaced in crosscut area and the other (4) are at equal distance in rip cut area. ... more
11

Guillotines / Shearing SAFAN HVR 255-4 2550mm x 4mm Hydraulic Guillotine/Shear

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
1998
ready for operation (used)
Serial No. B8386 Capacity 2550mm x 4mm Control Safan DNC 100 Back gauge Programmable Rapid blade adjustment Yes Variable rake Yes Work supports 2 @ 610mm Squaring arms 1 @ 2100mm Input 415/3/50 ac 11 kW Clamps 15 x Hydraulic Read-out to back gauge Metric Actuated via Wander Type Foot Switch Be0ta7w2gu Fitted with Fingerguards & Rear Infrared Guards Length 11'6" / 3.51m Width 6'8" / 2.03m Height 5'4" / 1.63m Nett weight actual 3.79 ton / 3850 kgs more
1
Make Cuno, Type 08 ZLC-2, No LF 17219/17220/17223, New 1996, Material Stainless steel 1.4404 (316L), Filter "Cartridge Filter Housing" (3x), Extra Specifications - Housing dia. 310mm - For 11 filters - Inlet dia. 50mm - Outlet dia. 50mm - On legs - Designpressure 10 bar, 90 Degr. C. - Dim. 0,5x0,5 M, Height 1,5 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welc... more
4

CNC lathe Colchester Tornado 210

Kaufungen, GermanyGermany
6559 km
1999
ready for operation (used)
1 x used CNC lathe Manufacturer: Colchester Type: Tornado 210 Fh7chal Built: 1999 Technical information: Control: Fanuc 21I-T Speed max. 5,000 rpm max rotation alder length 500 mm max.feed meter: 250 mm max turning diameter above bed: 530 mm Rod passage 65 mm Control on: 42,317 h (read) Feed on: 16,633 h (read) Revolver 12-speed with bar loader MBF2000 Conveyor All technical information to the best of our knowledge without guarantee more
8

Injection moulding machines ENGEL ES 2550/700 DUO

Kaiserslautern, GermanyGermany dealership location
6526 km
1999
ready for operation (used)
General Data Machine weight 54431 kg Control Unit Brand Engel Model CC 100 CNC main language Czech CNC language customizable Yes Injection Unit Screw diameter 80 mm Shot weight 1879 g/PS Stroke volume 2160 cm³ Nl0u9 Clamping Unit Clamping force 7000 kN Distance between bars 1090x1000 mm Mould height min 640 mm Size of mold platens 11570x1480 mm This ENGEL ES 2550/700 DUO Injection Moulding Machine was made in 1999 in Austria and has a production record of 59000 hours. Operated through an EN... more
15

Machine accessories LC 150

Babberich, NetherlandsNetherlands dealership location
6312 km
ready for operation (used)
Make OML Italia 2011 YOP Dimensions Length 3445 mm Width 140 mm Height 100 mm Be9mvw7msg more
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Bbust37rjd SELCO WN 600 FRONT LOAD AUTOMATIC PANEL SAW: -- Specifications: 149.6" (3,800 mm) Overall cutting length, 125.9" (3,200 mm) pusher stroke, 5.1" (132 mm) max. saw blade projection. 30 HP (21.3 KW) main & 3.6 HP (2.6 KW) scoring motor; main saw blade dia 17.7" (450 mm), scoring saw blade dia 7.8" (200 mm) Manual scoring saw adjustment (from outside), exclusion of scoring saw blade from the cycle through panel push-button -- Saw Carriage: Variab... more
12

Guillotines / Shearing SAFAN VS255-4 2500mm x 4mm Hydraulic Guillotine/Shear

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
1981
ready for operation (used)
Serial No. 15051 Capacity 2550 mm x 4 mm Back gauge power Rapid blade adjustment yes Work supports 2 @ 24" / 609mm Squaring arms 1 @ 43" / 1092mm Input 415/3/50 4 kW approx Clamps 15 x hydraulic Actuated via wander type foot switch Be0taufvst Fitted with fingerguard Length 10' 6" / 3.2m Width 6' 10" / 2.08m Height 4' 6" / 1.37m Nett weight atual. 3,350 Kgs / 3.30 Tons more
2
Make Bürkle Pressen Oberflachentechnik Freudenstad, Type LZKLL-200, [...] 8435, Roller coating machine (1x), Roll width 200mm, With motor , With pump , With motor 0,37 KW, 220/380 Volt (Ex), With feeding belt , With motor , With variable speed drive , New 1998, Mounted on frame , With switch , Floorspace 0,8x0,8 M, Total height 1,3 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination w... more
7
1 used guide and pull spindle lathe Manufacturer: Colchester Type: Magnum 1250 Technical data: U0nfrjad Turning length: 3000 mm Tip height: 315 mm Max turning diameter over slide: 390 mm Max rotary diameter when the bridge is removed: 900 mm Spindle bore 116 mm HAUPTSPINDEL 6-1250 rpm; 15 Kw; equipped with: - Multifix carrier head more
5

CNC tool measuring machine Walter Toolcheck

Cloppenburg, GermanyGermany dealership location
6393 km
2003
ready for operation (used)
Description: Suitable for fully automatic, non-intrusive measuring of cutting tools of all kinds. Both incident and transmitted light measurement can be made by means of 2 CCD matrix camera. Can be determined E.g. diameter, length and angular dimensions and spiral angle, spiral length, clearance angle, rake angle, bevel width, etc. Technical data: Axis: travel X-axis 310 mm, stroke Y-axis 290 mm, Z axis travel 640 mm, speed A-axis 60 U/Min.; Diameter of workpiece taper ISO 50, work pieces: ... more
5

screw compressor KAESER CSDX 137 T

Niederlangen, GermanyGermany dealership location
6338 km
used
feed pressure:13 bar liter capacity:9,88 m³/min 2er8g8c operating pressure:15 bar Speed:2978 min-1 rated capacity:75 kVA weight of the machine ca.:2,3 t dimensions of the machine ca.:2,6 x 1,3 x 2,1 m Operating hours: less than 100 hours more
1
Elect./Voltage: Bebdlos37w CEFLA/FALCONI KLEENSPRAY 12 Reciprocating Spray System; The "Kleenspray 12" Reciprocating Automatic Spraying system is mainly based on the use of a closed continuous CFB belt conveying the panels to & through the spray area. The design has many advanced mechanical solutions to allow considerable advantages. Technical Features: -- Fully pressurized spray cabin, "Paper Belt Overspray Capturing" lacquer system; microprocessor unit for spraying operation control. -... more
5

Sundry Items SCIAKY PMM2TLCK-125-36-10 Seam Welder. Serial No. 7412

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
ready for operation (used)
Serial No. 7412 Amperage 125Kva Input 400/3/60hz Duty cycle 125Kva @ 50% Throat depth 44" 1117mm Daylight 12" 305mm Actuated via Wander Type Footswitch Fitted with Coolant Equipment Chiller Unit Be0tsqmhep Length 3100mm Width 1500mm Height 2650mm Nett weight actual. 6,000 Kgs. / 5.9 Tons. more
2

Edwards IDX-1000 - Pumpen Edwards IDX-1000 - Pump

MA Barneveld, NetherlandsNetherlands dealership location
6266 km
used
Make Edwards Ltd, Type IDX 1000, [...] 169422739, Material Mild steel, Pump "dry vacuum", Capacity 1000 m3/hr, Without motor (max 30 kW), Inlet dia. 200 mm, Outlet dia. +/- 120 mm, New 2016, Mounted on frame , Floorspace 1,8x0,8m, Total height 0,9m, Weight 1600 KG, Extra Specifications Needs to be overhauled; not functional What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. Y... more
1
Tip height: 190 mm Tip width: 765 mm Bfbau9ptet Spindle speed: 25-2000 rpm. Spindle diameter: 54 mm Facilities: - 2-axis digital display FAGOR - Multifix quick-release steel holder Size B - Coolant device - Feed protection, drum stop more
4

long conveyor Horizon LC-10/11

Volkach, GermanyGermany dealership location
6667 km
used
3 MONTHS LA-POSTPRESS WARRANTY except electronics offer consists of: Jz39amrj long delivery unit LC-10/11 We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs more
4
Pressure:630 t distance between columns:1600 mm stroke:fix 250 mm no. of strokes:20 /min distance table/ram, max. stroke up, adjustment up:900 mm table surface area:1550 x 1200 mm table height over floor:800 mm side window:620 mm ram surface:1360 x 1200 mm ram adjustment:160 mm height over floor:5,9 m height beneath floor:0,6 m power requirement:32,0 kW weight:59,0 t dimensions (WxDxH):3,0 x 2,2 x 6,5 m German Safety: permitted only for safe tools: clutch:pneumatisch overload protection in ram... more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Bbu280i3eo 1994 Charmilles Form 2LC ZNC Diesinker Specifications: -- MAXIMUM PROCESS CURRENT 50 AMP -- WORK TANK VOLUME (W X D X H) 32" X 12" X 12" (820X500X12MM) -- WORK TABLE AREA (L X W) 19.5" X 13.75" (500X350MM) -- TRAVELS X AXIS AND Y AXIS 12" X 8" (300X200MM) -- MAXIMUM QUILL TO TABLE 22" (550MM) -- QUILL STROKE 8" (200MM) -- MAXIMUM ELECTRODE LOAD 132 LBS (60KG) -- MAXIMUM WORKPIECE WEIGHT 1100 LBS (500KG) -- DIELECTRIC RESERVOIR 63 GALLONS ... more
8

Box & Pan Folders MORGAN HBP 100/10 2550mm x 3mm Hydraulic Box & Pan Folder. Manufactured 2007

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
2007
ready for operation (used)
Serial No. BKL 0011/907 Capacity 3mm x 2550mm Top beam rise & fall Hydraulically 50mm Maximum length of bend 2550mm Maximum material thickness 3mm Angle of bend 135 Degrees Input 415/3/50hz Fitted with Back Stop By Hand F3yt2lb Equipment Full Length Interchangeable fingers Length 3050mm Width 1000mm Height 1250mm Nett weight Actual 2,060 Kilos. / 2.1 Tons. more
2

Edwards IDX-1000 - Pumpen Edwards IDX-1000 - Pump

MA Barneveld, NetherlandsNetherlands dealership location
6266 km
used
Make Edwards Ltd, Type IDX 1000, [...] 159434827, Material Mild steel, Pump "dry vacuum", Capacity 1000 m3/hr, Without motor (max. 30 kw), Inlet dia. 200mm, Outlet dia. +/- 120 mm, New 2015, Mounted on frame , Floorspace 1,8x0,8m, Total height 0,9m, Weight 1600 KG, Extra Specifications Needs to be overhauled; not functional What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. Y... more
9
Table length: 2550 mm Table width: 1550 mm Bfbauv8nqs Workpiece weight: 330 kg Travel - x 2520 mm Travel - y 1550 mm Travel - z 300 mm Laser power in watts: 4000 Control: FANUC 160i-L Sheet thickness for steel: 12 mm Sheet thickness for stainless steel: 6 mm Sheet thickness for aluminium: 4 mm Travel speed X/Y/Z 80 m/min Machine weight approx. 6,600 kg Accessories/Equipment: - new Turboblower in February 2019 - new vacuum pump in 2019 - Laser source FANUC AF4000E - Laser duty... more
12

Laser cutting machines AMADA LC 3015 X1 NT

Kaiserslautern, GermanyGermany dealership location
6526 km
2006
ready for operation (used)
General Data Measurements width 6670 mm Measurements depth 3260 mm Measurements height 2100 mm Machine weight 11700 kg Control Unit Brand AMADA Model LC20BP2 CNC main language English CNC language customizable Yes Main Drive Laser power 4 kW Laser type CO2 Laser brand AMADA Movement X-Axis Movement 3100 mm Y-Axis Movement 1550 mm Z-Axis Movement 120 mm Nmio2 Workpiece Workpiece X 3150 mm Workpiece Y 1525 mm Workpiece Z 19 mm Workpiece weight 690 kg Max Material Thickness Steel 20 mm Stainl... more
5

Machining Center - Vertical DOOSAN MYNX 650

Karlsbad, GermanyGermany dealership location
6602 km
2008
used
x-travel:1300 mm y-travel:650 mm z-travel:625 mm Bcqfe3kuom table surface area:1.400 x 650 mm table load capacity:1000 kg tool taper:SK 40 spindle drive:18 / 15 kW turning speed range - stepless:8.000 1/min max. torque on the spindle: Nm numbers of positions in the tool changer:24 control:FANUC 21i MB feed speeds infinitely variable:10000 mm/min rapid traverse:24 / 24 /20 m/min total connected load: kVA weight of the machine ca.:8,5 t dimensions of the machine ca.:3,15 x 2,5 x 2,7 m vertica... more
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Fe7leoj BURKLE - SLC 1600, [...] Coater. Lacquering Machine to coat Wood Flooring (Parquet) or flat panels of any kind - wood, plastic or steel. -- Uses UV, Water base, and Solvent base coatings of all types; setup with a Stainless Steel fluid re-circulating system. Specifications: -- Working height of 38"; working width of 65" and workpiece thickness up to 3". -- Variable feed speed; independently controlled applicator and doctor roll's for maximum coa... more
8

Guillotines / Shearing LVD HST 25/6 2550mm x 6mm Hydraulic Guillotine/Shear

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
1990
ready for operation (used)
Serial No. 17103 Capacity 2500mm x 6.35mm Control Elgo P8721 Back gauge Programmable Rapid blade adjustment yes Variable rake yes Work supports 2 @ 1000 mm Squaring arms 1 @ 2000 mm Input 415/3/50 5.5 kW Clamps 14 x hydraulic Read-out to back gauge metric Actuated via wander type foot switch Fitted with fingerguard Length 11' 6" / 3.50m Width 6' / 1.83m Dwjwgm Height 5' 6" / 1.67m Nett weight actual. 4,380 Kgs / 4.31 Tons more
2

Edwards IDX-1000 - Pumpen Edwards IDX-1000 - Pump

MA Barneveld, NetherlandsNetherlands dealership location
6266 km
used
Make Edwards Ltd, Type IDX 1000, [...] 169428948, Material Mild steel, Pump "dry vacuum", Capacity 1000 m3/hr, Without motor (max. 30 kW), Inlet dia. 200 mm, Outlet dia. +/- 120 mm, New 2016, Mounted on frame , Floorspace 1,8x0,8 M, Total height 0,9 M, Weight 1600 KG, Extra Specifications Needs to be overhauled; not functional What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide... more
5

Heavy Duty Lathe WMW - MEUSELWITZ DXWK 1000

Mönchengladbach, GermanyGermany dealership location
6363 km
used
turning diameter over bed:1100 mm turning diameter over slide rest:1000 mm turning length:6000 mm centre distance:6100 mm Ptpova max. workpiece weight between centres:30.000 kg turning speed range::0,71 - 140 U/min feed stepless:1 - 1500 mm/min max. torque on the spindle:12800 kpm rapid traverse::3000 total power requirement:130 kW weight of the machine ca.:53 t dimensions of the machine ca.:13,5 x 3,6 x 3,2 m complete retrofit with CNC SIEMENS 8402 D in 2012 roller steady rest chip conveyor ... more
14

Laser cutting machines AMADA LC 2415 A3

More Amada Lc 2415
Kaiserslautern, GermanyGermany dealership location
6526 km
2004
ready for operation (used)
General Data Measurements width 2800 mm Measurements depth 5700 mm Measurements height 2275 mm Machine weight 6700 kg Control Unit Brand Fanuc Model 160i-L CNC main language Spanish CNC language customizable Yes Main Drive Plasma brand Fanuc Plasma power 4 kW Movement Eeeu99t X-Axis Movement 2520 mm Y-Axis Movement 1850 mm Z-Axis Movement 300 mm Workpiece Workpiece X 2520 mm Workpiece Y 1850 mm Workpiece weight 330 kg Media Power consumption 65 kVA This AMADA LC 2415 A3 Laser Cutting Ma... more
8

CNC Lathes Doosan S670L x 1800 CNC Slant Bed Lathe

Dundee, United KingdomUnited Kingdom dealership location
5590 km
2001
ready for operation (used)
Code: ST3007 Doosan S670L CNC Slant Bed Lathe Control: FANUC 18TC Swing over Bed: 850mm Distance Between Centres: 1850mm Max. Turning Length: 1800mm T82ay3dt Spindle Bore: 152mm Speed Range: 15 - 1500 RPM Machine with: Swarf Conveyor more
5

Centre Lathes COLCHESTER MASTIFF 1400 Gap Bed Lathe. 10.1/2" x 60" / 267mm x 1524mm,

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
ready for operation (used)
Serial No. LMF - 60GIRJH / 07258 Height of centres 10.1/2" / 267mm Between centres 60" / 1524mm Swing over bed 21" / 533mm Swing over cross slide 14" / 356mm Swing in gap 32" / 813mm Spindle speeds 18-1400 rpm Spindle bore 3.5/8" / 92mm Tail Stock 5 morse taper Quick change gearbox whit/metric/mod/dp Gap piece casting 13.3/4" / 349mm Gap in front of face plate 8" / 203mm Bed type double vee Input 415/3/50hz /12.5hp I9dymqt Pitch of lead screw 4 tpi 3 jaw chuck 12" / 305mm Tool post quick chan... more
2
Make Carl Canzler GmbH & Co. Düren, Type Spiral heat exchanger, No 5849, New 1985, Tube material Stainless steel, Heat exchanger (1x), Heating surface 4,2 m2, Tube capacity 31/21 Ltr (Channel A/B), Working pressure tubes vac/3 Ltr (Inner) / 5 bar (Outer channel), Max. temperature 160 Degr. C., Floorspace 0,8x0,6 M, Total height 0,8 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination w... more
7

Fiber laser cutting machines AMADA LCG-3015 AJ

Kaiserslautern, GermanyGermany dealership location
6526 km
2014
ready for operation (used)
General Data Measurements width 6200 mm Measurements depth 10300 mm Measurements height 2350 mm Machine weight 8000 kg Nmhxd Control Unit Brand AMADA Model AMNC-F31 Main Drive Laser power 2.1 kW Laser type Fiber Laser brand AMADA AJ2000 Movement X-Axis Movement 3000 mm Y-Axis Movement 1500 mm Max Material Thickness Steel 8 mm Stainless steel 4 mm Aluminium 4 mm Media Main electronic connection 200 V Power consumption 12.8 kVA This AMADA LCG-3015 AJ Fiber laser cutting machine from Japan w... more
3

long delivery Horizon LC-20

Volkach, GermanyGermany dealership location
6667 km
used
3 MONTHS LA-POSTPRESS WARRANTY Bc0w8gbkt0 except electronics offer consists of: long delivery unit LC-20 We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs more
1
Elect./Voltage: 380 V, 50/60 Cy, 3 Ph. Hyl3ppr CEFLA/FALCIONI UNOSPRAY Spraying System (Reciprocating Feed Thru) This Sprayer is ideal for the application of WATERBORNE and UV DRYING LACQUERS: These Products assure minimum Environmental Impact. -- Automatic spraying system "UNOSPRAY" is mainly based on the use of a closed continuous CFB belt conveying the panels to the spray area. The design has many advanced mechanical solutions to allow considerable advantages. Technical Specifications &... more
1

Centre Lathes COLCHESTER Student 6" x 24" / 152mm x 609mm Lathe

Leicestershire, United KingdomUnited Kingdom dealership location
5824 km
ready for operation (used)
Nnji2 Serial No. F2- 71289X Height of centres 6" Between centres 24" Swing over bed 12" Swing over cross slide 8" Swing in gap 19" Spindle speeds 54 - 1200 rpm Spindle bore 1.1/2" Tail Stock no 3 morse taper 3 jaw chuck 7" more
2
Make Carl Canzler GmbH & Co. Düren, Type Spiral heat exchanger, No 5913, New 1986, Tube material Stainless steel, Heat exchanger (1x), Heating surface 4,2 m2, Tube capacity 31/21 Ltr (Channel A/B), Working pressure tubes vac/3 Ltr (Inner) / 5 bar (Outer channel), Max. temperature 160 Degr. C., Floorspace 0,8x0,6 M, Total height 0,8 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination w... more


doosan dx ...
daily

New machines via email!

Stay updated!

to

to

Edit search
DOOSAN DX 255 LC
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.