Used Deckel Dialog 4 for sale (705)

Condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: 2832-1076, feed length X-axis: 560 mm, feed length Y-axis: 500 mm, feed length Z-axis: 390 mm, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 390 mm, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, total height: 2,265 mm, total width: 2,410 mm, total length: 2,710 mm, table width: 530 mm, table length: 900 mm, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, table load: 800 kg, overall weight: 2,890 kg, input voltage: 380 V, workpiece weight (max.): 800 kg, input current: 44 A, input frequency: 50 Hz, number of spindles: 2, number of slots in tool magazine: 20, Equipment: documentation/manual, Tool holder: SK 40, Control: DECKEL DIALOG 11, with documentation. According to our research, the NPL01 board of the tool changer is defective. Therefore, the automatic tool changer does not work. Otherwise, the machine is fully functional. Operating manual (Machine manual 1), diagnostic manual for the 'DIALOG11' control, machine manual 2 (accessories), programming manuals 1-3, and electrical wiring diagrams are available. The machine can be viewed under power. The machine is bought as is. No warranty. Hodpfx Agowqdtps Nonu

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,510 h, functionality: fully functional, machine/vehicle number: 11670000823, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 180, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Drive: Variable-speed asynchronous motor with liquid cooling Control: Sinumerik 840D powerline Work spindle Tool holder: HSK-A63, hydraulic-mechanical tool clamping Spindle speed: 0 – 10,000 rpm, continuously programmable Feed Drive: AC brake motors on the X, Y, Z, and B axes Feed range on the X, Y, and Z axes: 0 – 60,000 mm/min Rapid traverse on the X, Y, and Z axes: 80 m/min Measuring system Resolution on the X, Y, and Z axes: 0.001 mm Position tolerance on the X, Y, and Z-axis: 0.008 mm Pallet Number: 2 Size: 630 × 630 mm Hole pattern: 108 × bushing Ø 16.02 H6 Centering bushing: Ø 16.02 H6, 38.5 mm deep NC rotary table Max. tabletop rotation: 30 rpm Tabletop holding torque at 40% duty cycle: 5,000 Nm Tabletop holding torque at 100% duty cycle: 3,250 Nm Workpiece weight Per pallet: max. 800 kg Difference with different loads: max. 800 kg Tool magazine Type: Vertical chain magazine HSK-A63 Positions: 180 Tool changing system: Double gripper Max. tool diameter standard: 80 mm Max. tool diameter with free adjacent positions: 160 mm Max. Tool length from spindle nose: 550 mm Max. tool weight: 12 kg Max. magazine load: 630 kg MACHINE DETAILS Space requirement: 6.0 x 6.0 m Height: 3.2 m Weight: 18 t Power requirement: 71 kVA Machine dimensions: approx. 4.7 x 5.6 x 3.2 m EQUIPMENT - Internal coolant supply - Chip conveyor - Belt filter system - Cooling unit - Rotoclear - Tool breakage detection (laser) - Mist separator - Measuring probe - Handheld control unit - Flushing gun - Blow-air cooling system - 4-color signal lamp - Dynamic package Hnodjxf Htxopfx Ag Nju

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 2930 mm Measurements depth 3210 mm Measurements height 2900 mm Machine weight 9200 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 28000 rpm Spindle motor power 38/28 kW Tool taper HSK-A63 Number of axis 5 Movement X-Axis Movement 450 Y-Axis Movement 600 Z-Axis Movement 400 Table Outer length 400 mm Outer width 400 mm Number of tslots 5 Distance between 63 mm Media Chip conveyor Yes Hnsdpfxsxn U A Ho Ag Nsu Internal cooling Yes Additional Equipment Tool Storage Capacity: 30 tools /Max Tool Weight: 6 kg / Max Tool Diameter: 80 mm / Max Tool Length: 250 mm Graphite Dust Collector Heidenhain Touch Probe TS 649 3D Quick Set for 5-Axis Calibration This 5-axis DMG DECKEL MAHO HSC 55 linear vertical machining centre was manufactured in 2008. Consider the opportunity to buy this DMG DECKEL MAHO HSC 55 linear vertical machining centre if you are looking to get high quality milling capabilities. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: Heidenhain Mill Plus, table width: 500 mm, table length: 500 mm, rotary table diameter: 500 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,618 h, coolant supply: 40 bar, spindle nose: SK40 (DIN69871), number of slots in tool magazine: 60, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The 5-axis DMU50 eVolution has been removed from production in working order and can also be seen in operation in our showroom (by appointment). Hnsdpfexnixiox Ag Neu The machine is equipped with 40 bar internal spindle cooling, chip conveyor, 60-tool changer, Renishaw tool setter, Heidenhain 3D probe, 18,000 RPM spindle, Visiport, and original factory extraction system.

Condition: good (used), branded engraving milling machine, cover GK12 with accessories Hnedpfx Aju T Nffeg Neu

Condition: used, DECKEL MONITOR SCREEN DIALOG FP2 / FP3 Hsdpfjxn Tzzjx Ag Nenu

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, turning length: 600 mm, turning diameter: 400 mm, spindle bore: 73 mm, controller model: ELTRO MPULS, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning diameter: 400 mm Turning length: 600 mm Hnsdpfxsxn I Sbe Ag Nsu Swing diameter: 600 mm Spindle bore: 73 mm MACHINE DETAILS Control model: ELTRO MPULS

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 11035534144, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, spindle speed (max.): 9,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment term is one week after purchase of the machine! Bidding obligates the buyer to collect the machine on time between 17.11.2025 and 21.11.2025! TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Rapid traverse X-axis: 12 m/min Rapid traverse Y-axis: 12 m/min Rapid traverse Z-axis: 12 m/min Feed rate in X, Y, and Z axes: 10,000 mm/min Maximum spindle speed: 9,000 rpm Tool holder: SK 40 Max. tool length from spindle nose: 290 mm Max. tool weight with automatic tool changer: 6 kg Max. total tool weight in magazine: 50 kg Clamping area: 700 x 500 mm Rotary range: 360° Swivel range: +95/-10° Permissible worktable load: 200 kg MACHINE DETAILS Control model: SIEMENS SINUMERIK 810 D Dimensions & weight Dimensions (L x W x H): 2,300 x 2,000 x 2,300 mm Total weight: 5,000 kg EQUIPMENT 16-position tool changer Rotary table with swivel axis Mechanical table plate clamping Note: The machine vices shown on the table are not included in the scope of delivery. Hnsdpoxm T I Esfx Ag Nou

Condition: ready for operation (used), Year of construction: 1999, Control Unit Brand HEIDENHAIN Model 426 Hsdpfxsxn Uyfe Ag Njnu This 5-axis DECKEL MAHO DMU 80P was manufactured in 1999. It features a Heidenhain 426 control system, a 30-slot tool magazine, and a SK 40 toolholder type. The spindle cooling is capable of 40 bar, enhancing its performance for complex machining tasks. Consider the opportunity to buy this DECKEL MAHO DMU 80P universal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, controller model: Heidenhain TNC 426/430M, total height: 2,300 mm, total length: 2,200 mm, total width: 2,200 mm, table width: 700 mm, table length: 500 mm, table load: 200 kg, overall weight: 3,000 kg, spindle speed (max.): 9,000 rpm, operating hours of spindle: 10,292 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 16, input voltage: 400 V, Equipment: documentation/manual, This Deckel Maho DMU 50T comes from a training department and has therefore never been used as a production machine. The machine is still in very tidy condition; both the axes and the spindle run very smoothly. Equipped with a Heidenhain electronic handwheel. Dimensions: 2200x2200x2300 mm (LxWxH) Hnodpoxlquaefx Ag Neu Weight: approx. 3000 kg

Condition: good (used), Year of construction: 1993, Graver grinding machine Make: Deckel Model: S0 year of construction 1993 Hodeu T Nfxepfx Ag Nenu

Condition: used, x-travel 800 mm y-travel 600 mm z-travel 550 mm Control Deckel Dialog 11 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Hnedpfjxndb Ssx Ag Nju Subject to changes and errors in the technical data and information as well as prior sale!

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm table load max. 200 kg tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min Hjdpfx Agexl Tcge Nonu rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a research centre. Equipment: 3-axis active digital readout made by Heidenhain TNC 113 Fixed angle table Coolant equipment Kelch mounting block Machine vise Counterholding device for the horizontal spindle

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 2881-0191, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS DIALOG 112, spindle speed (max.): 8,000 rpm, No reserve price – guaranteed sale to the highest bidder! Payment is due one week after purchase of the machine! Placing a bid obligates you to collect the machine on time between 17/11/2025 and 21/11/2025! TECHNICAL SPECIFICATIONS Travel X-axis: 700 mm Travel Y-axis: 550 mm Travel Z-axis: 500 mm Feed rate X, Y, Z: 1 - 10,000 mm/min Rapid traverse X, Y: 30 m/min Rapid traverse Z: 20 m/min Setup mode speed X, Y, Z: 1 - 2,000 mm/min Table width: 550 mm Table length: 900 mm Table load: 800 kg Max. setup height: 600 mm Distance spindle nose to table: 150 - 650 mm Max. spindle speed: 8,000 rpm Tool magazine positions: 40 Holder diameter: 40 mm Tool holder: SK 40 Max. tool diameter for standard tools: 80 mm Max. tool diameter for special tools with free adjacent slots: 140 mm Max. tool diameter for boring heads with free adjacent slots: 200 mm Max. tool length from spindle nose: 300 mm Max. tool weight: 12 kg Hnsdpjxm Ty Ijfx Ag Nsu Control model: SIEMENS DIALOG 112 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 3,300 x 2,900 mm Total weight: 8,000 kg EQUIPMENT Documentation/manual Chip conveyor Note: The magnetic clamping plate shown on the table is not included in the scope of delivery.

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine no. 51265 Year of manufacture approx. 1967 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.6 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Power feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill travel on vertical milling head 60 mm - Fixed angle table - Separate control cabinet Required space L x W x H: 1100 x 1100 x 1600 mm Weight: 650 kg Good condition Hsdpfx Ajghtvaog Nonu

Condition: used, Year of construction: 1998, x-travel 500 mm y-travel 400 mm z-travel 400 mm Control TNC 426M Heidenhain turning speed range - main spindle 20 - 9.000 min/-1 power capacity - main spindel 9 / 13 kW max. Torque 57 / 82 Nm tool taper ISO 40 DIN 69871 table diameter 700 x 500 mm swivellable B: 105° (-10°/+95°) man. rotatable 360° man. max. table load 200 kg number of T-slots 7 T-slot - distance 63 mm Hnodpexmag Uefx Ag Neu T-slot - width 14H7 mm center hole 30H7 mm number of toolpositions 16 pos. tool taper ISO 40 DIN 69871 max. tool length 290 mm max. tool weight 6,0 kg max. total weight 50 kg feed speeds max. 10.000 mm/min rapid traverse 12 m/min input unit 0,01 mm total power requirement 17 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 4,0 x 4,0 x 2,5 m CNC - MachiningCenter Univresal DECKEL MAHO - DMU 50 T - 5 Axis (3 + 2) - Swivel-Rotary-Table incl. Angle-Specification (manual Axis B+C via Handwheel)

Condition: good (used), Year of construction: 1994, Graver grinding machine Make: Deckel Model: S0 Hodpfx Ageu T Nf Se Nonu year of construction 1994

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 650 mm z-travel 550 mm Control Mill Plus auto power on hours ca. 45.000 h turning speed range - main spindle 30.000 min/-1 tool taper HSK 50 E Hjdpfx Ajvdufdjg Nenu In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details x-travel 1150 mm y-travel 710 mm z-travel 710 mm table surface area 1500 x 800 mm table load 800 kg tool taper SK 40 spindle turning speed - stepless 20 - 12000 U/min feeds -stepless- 0 - 30000 mm/min main drive motor 15 / 10 kW Additional information 5-Axis Universal Machining Center Equipment: CNC-control HEIDENHAIN iTNC 530 (5-axis simultaneous) NC rotary table (4th-axis), diameter 800 mm, integrated into the fixed table Controlled milling head (B-axis), swivel range -120/+30 deg. ATC 32-positions (2 x 16) Chip conveyor Hsdsw I A Ekspfx Ag Njnu Coolant system for external cooling, no internal cooling

Condition: not inspected (used), operating hours: 28,461 h, functionality: unexamined, machine/vehicle number: 28850008692, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS SINUMERIK 810 D, table load: 500 kg, No minimum price – guaranteed sale to the highest bidder! The payment deadline is one week after purchase of the machine! Placing a bid obligates you to collect the machine on time between 17/11/2025 and 21/11/2025! TECHNICAL DETAILS Travel X-axis: 630 mm Travel Y-axis: 500 mm Travel Z-axis: 500 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Feed rate X-axis: 0–30,000 mm/min Hnodsxm Tu Eepfx Ag Nsu Feed rate Y-axis: 0–30,000 mm/min Feed rate Z-axis: 0–30,000 mm/min Tool holder: SK 40 Number of tool positions: 24 Table width: 500 mm Table length: 800 mm Max. table load: 500 kg Loading height: 850 mm MACHINE DETAILS Control model: SIEMENS SINUMERIK 810 D Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,400 x 2,400 mm Total weight: 8,000 kg Operating hours: 28,461 h

Condition: ready for operation (used), Year of construction: 2003, operating hours: 24,243 h, Control Unit Brand HEIDENHAIN Model TNC 530 Main Drive Number of axis 4 Tools Number of index 100 Type of tool holder HSK 63 Additional Equipment 40 bar IKZ Hnjdpexllprofx Ag Neu This 4-axis DMG DECKEL MAHO DMF 300 was manufactured in 2003. It features a vertical machining center with 100 ATC tools, HSK 63, and a 40 bar IKZ. Consider the opportunity to buy this DMG DECKEL MAHO DMF 300 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 1999, x-travel 1.250 mm y-travel 880 mm z-travel 800 mm control TNC 430 Heidenhain Hjdpfx Agexmagnj Njnu turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 500 Nm tool taper SK 40 table surface area 1.500 x 1.050 mm max. table load 2.500 kg number of T-slots 10 T-slot - width 18 H7 mm T-slot - distance 100 mm number of toolpositions 60 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8 kg max. total weight 100 kg rapid traverse ( X / Y / Z ) 15 m/min feed speeds 10.000 mm/min total power requirement 29 kW weight of the machine ca. 16,0 t dimensions of the machine ca. 7,0 x 5,0 x 3,3 m CNC - Machining Center Vertical DECKEL MAHO - DMU 125 T

Year of construction: 1969, condition: good (used), Univ. tool milling machine DECKEL type FP 1 Machine No. 37101 Year of construction approx. 1969 travel X: 300 mm Y: 150 mm Z: 340 mm table size 600 x 200 mm spindle mounting MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 1,0 and 1,5 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - pinol shift at vertical milling head 60 mm - adjacent control cabinet space requirement L x W x H 1000 x 900 x 1750 mm weight 690 kg good condition Hnjdpfx Asl Dx I Sjg Nsu accessories: - collets - rotary table - vice - Counterholder H. Milling

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 rpm max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Hnodpfx Agjw Hybue Nsu Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: good (used), Technical data Working area: 250 × 700 mm Copy table size: 430 × 600 mm Travel / working range longitudinal (X): approx. 322 mm Travel / working range transverse (Y): approx. 200 mm Spindle drive / power: approx. 1.5 / 1.7 kW Hnjdpfxoxgh R Us Ag Nju Spindle speed: approx. 80 – 20,000 rpm Copy ratio (enlargement / reduction): 1:1 to 1:4 Overall dimensions (approx.): 2,000 × 2,000 × 2,000 mm Weight: approx. 1,650 kg