Used Deckel Fp 42 for sale (668)

Condition: like new (used), functionality: fully functional, Universal milling machine Deckel FP3 with new 3-axis FPS active digital display Heidenhain General overhaul by FPS 2015 Mint condition Technical data: >> Year of construction 1980 Machine no. 2201-5045 >> Rigid angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> rapid traverse in 3 axes >> Drive power .:2,0 / 4,0 KW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system M16 Hjdou Dm E Hopfx Andonu >> Weight approx. 1500 kg Accessories and equipment: >> 3 axes active digital display Heidenhain (latest version) >> Coolant device >> Central lubrication To the machine : On offer is a Deckel FP3 universal milling machine in mint condition. The FP3 was overhauled by FPS in 2015 and has only been used a little since then. The machine has little crank play and all spindles can be moved easily. On this newer FP3 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power. The machine is available immediately.

Condition: used, Year of construction: 1970, Deckel FP1 Tool and Cutter Grinding Machine Tool and Cutter Grinding Machine Deckel Type/Model FP1 Condition Used Geometrically overhauled in 2026, geometric protocol available Year of manufacture approx. 1970 The machine was completely disassembled, thoroughly cleaned, geometrically overhauled, and repainted. Subsequently, it was professionally reassembled, and a comprehensive functional test was performed. The machine geometry was inspected and adjusted. A test protocol according to DIN 8615 is available. During the work, the gib strips were also adjusted, and the coolant pump was overhauled. Technical data Travel distances X/Y/Z: 300 / 150 / 340 mm Spindle stroke: 60 mm vertical Tool holder: MK 4 Speed range: 40 to 2,000 rpm, two-stage motor, gear stages Speed stages: 16 speeds Hsdpfjz A Tn Ijx Andsnu Feed: 16 stages: 10 to 500 mm/min Drive power: Two-stage motor approx. 1.0 / 1.4 kW Operating voltage: 380 V / 50 Hz Total connected load: approx. 1.9 kW Clamping area: 600 x 210 mm Max. table load: approx. 150 kg Space requirement (W x H x D): approx. 1,100 x 1,000 x 1,500 mm Weight approx.: 750 kg Requested item: Transport costs in an individual offer.

Condition: excellent (used), Year of construction: 1986, X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Tool holder: SK 40 Drive power: 8.1 kW Hsdpfx Aszkhubsndonu Includes Heidenhain 3-axis digital display Includes various tools Includes machine vise Includes rotary table Includes additional angled milling head

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, feed length X-axis: 560 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, overall weight: 2,500 kg, Metal milling machine DECKEL, type FP4 NC, Heidenhain control, year of manufacture 1983, table size 900 x 530 mm, including a large number of tools. Hnodpfx Anezg Axmsdou Working area and travel ranges: X-axis (longitudinal): 560 mm, Y-axis (transverse): 500 mm, Z-axis (vertical): 400 mm (some tables or versions indicate up to 450 mm). Table size (standard tilting table): approx. 900 x 530 mm. Milling spindle & drive: Tool holder: SK 40. Speed range: 31.5 to 3150 rpm (geometrically stepped via manual or mechanical gearbox). Quill stroke: Vertical quill extendable by 80 mm, horizontal quill 65 mm. Spindle motor power: approx. 2.7 kW to 4.0 kW.

Condition: used, Year of construction: 1984, machine/vehicle number: 2804-1181, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 450 mm, table length: 700 mm, rotational speed (max.): 3,150 rpm, rotational speed (min.): 32 rpm, Used DECKEL tool milling machine model FP 3A CNC Table size: 700x450mm, spindle taper SK40 DIN 2080, Travel paths: X/Y/Z = 500/400/400mm, spindle speeds from 31.5 to 3150 rpm (21 working spindle speeds), feed rate 5-1250mm/min, rapid traverse in X, Y and Z 2500mm/min, coolant system and machine feet. Year of manufacture: 1984; the machine was overhauled by Harich in 2010. Hnsdpeyrnvvofx Andeu The machine is located at our site in 71334 Waiblingen-Beinstein and can of course be inspected. Please contact us.

Condition: used, Univ. universal milling machine DECKEL, Type FP 1 Machine No. 28317, Year of manufacture approx. 1960 Travel distances: X: 245 mm, Y: 150 mm, Z: 340 mm Table size: 600 x 210 mm Spindle mount, horizontal: MK 4 - S20 x 2 Spindle speed, vertical: 95-1900 rpm, 12 steps Spindle speed, horizontal: 60-1200 rpm, 12 steps Motor power: 0.8 and 1.1 kW, pole-changing Power connection: 380 Volt, 50 Hz - Spindle speed controlled via 2 motor speeds and 6 gear stages Hnedpfx Aneiy Ekvodeu - Feed in the X and Z axes - Coolant system with mechanical pump in the machine base - Quill travel on the vertical milling head: 60 mm - Vertical milling head swivels +/- 90° - Metal substructure made of angle iron with machine feet Space requirement L x W x H: 1100 x 900 x 1650 mm Weight: 650 kg Good condition

Condition: reconditioned (used), Year of construction: 1978, Universal milling machine Manufacturer: DECKEL Model: FP 2, stepless Year of manufacture: 1978 - overhauled, newly painted Hodsfcqfpjpfx Andonu RAL 7035 light gray / RAL 7012 basalt gray RAL 5008 gray-blue Machine no.: 2202-10147 with warranty Geometric inspection with test report Accessories: - 3-axis digital display HEIDENHAIN ND 780 - Universal table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw-in thread S 20 x 2 - Central lubrication, manually operated - Coolant system - Operating manual - used, as is -

Condition: used, Univ. universal tool milling machine DECKEL, Type FP 1 Machine No. 51265, Year of manufacture approx. 1967 Travel distances X: 300 mm, Y: 150 mm, Z: 340 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20 x 2 Spindle speed 40-2000 rpm, 16 speeds Motor power 1.0 and 1.6 kW, pole-changing Mains connection 380 volts, 50 Hz Hodpfoghtvajx Andsnu - Feed in the X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill movement on the vertical milling head 60 mm - Swivel, rotary, and tilting angle table - Coolant pump in the machine base - Adjacent control cabinet Space required L x W x H 1100 x 1100 x 1600 mm Weight 690 kg Good condition

Condition: refurbished (used), Year of construction: 1978, Universal milling machine Manufacturer: DECKEL Model: FP 1 with stepless feed Hnsdpfsdf E H Aex Andju Year of manufacture: approx. 1975 - partially overhauled, newly painted, RAL 7035 light grey / RAL 7012 basalt grey / RAL 5012 light blue with warranty geometric inspection with test report Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 600 x 250 (T-slot: 12 mm) - Vertical milling head SK 40 with draw-in thread S 20 x 2 - Coolant system - Operating manual - used, as is -

Condition: used, Year of construction: 1986, functionality: fully functional, x-travel 710 mm y-travel 600 mm z-travel 500 mm NC rotary table 630 mm Spindle taper SK 40 Spindle speeds 18 - 6300 rpm DIALOG 4 control Feed rate 2 - 3600 mm/min Rapid traverse 6 m/min Max. table load 485 kg Swivel stroke 80 mm Spindle motor 9.5 kW Total required power 20 kVA Machine weight approx. 4.6 t Dimensions L x W x H 3.8 x 2.24 x 2.35 m Hedpfxjwu Dfmo Andonu Accessories: LNS Fox ws 2-1500 filter unit with 2 new filters in box, 2 cabinets full of tools This machine is stored at our facility.

Condition: good (used), functionality: fully functional, Internal article number: 26054 Universal milling machine Deckel FP1 + Heidenhain digital display Travel distances: X300 / Y160 / Z340 mm Spindle stroke: 60 mm Power consumption: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Hedpfxszx T Ags Andonu Tool holder: SK40 The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is running, in our heated warehouse covering an area of over 500 m².

Year of construction: 1982, condition: refurbished (used), Universal tool milling machine Make: DECKEL Model: FP 3 Active year of construction: 1982 - overhauled, new painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue machine no.: 2201-5539 with warranty geometric acceptance with test report accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 650 x 370 mm (T-slot: 12 mm) Hjdpfxspn Rgvj Andonu - Vertical milling head SK 40 with tightening thread M 16 - Central lubrication, manually operated - coolant device - Operating instructions used as seen The machine corresponds technically the state of the art of the year of construction.

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Hnjdpfxer D T U Do Andsu Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Condition: used, Univ. universal tool milling machine DECKEL, type FP 1 Machine no. 52185, year of manufacture 1968 Travel distances: X: 300 mm, Y: 150 mm, Z: 340 mm Table size: 600 x 250 mm Spindle mount: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.4 kW, pole-shifting Power connection: 380 volts, 50 Hz - Feed in the X and Z axes - Two motor speeds and 8 gear stages - Quill travel on the vertical milling head: 60 mm - Fixed tilting table - Coolant system in the machine base - Adjacent control cabinet - Counter holder with counter bearing for horizontal milling, SK 40 Space requirement L x W x H: 1200 x 1100 x 1600 mm Weight: approx. 1000 kg Very good condition Hsdsdzqb Sopfx Andjnu

Condition: good (used), 1 used universal tool milling machine make Deckel type FP 1 year 82 Technical data: x-travel: 300 mm Hnodpfjrn I Rzex Andsu y-travel: 160 mm z-travel: 340 mm Spindle holder SK 40 Table size: 600x210 mm Spindle speeds: 40-2000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6x1.3x1.8 m

Year of construction: 1968, condition: used, Cover milling machine FP1 with 3 axis digital display 380V Machine no. 37729 120-1900 rpm Travel X-axis:300 mm Hedpfx Anspmrpxjdjnu Travel Y-axis:150 mm Z-axis travel:340 mm Tool holder: MK 4 with tightening thread S 20 x 2 Milling head type:Vertical milling head Table type:Fixed table Table clamping surface:600 x 210 mm T-slot size:12 mm X-axis feed:290 mm Y-axis feed:150 mm Z-axis feed:330 mm Weight:700 kg Cover milling machine FP1 ID: M100000409

Year of construction: 2008, condition: ready for operation (used), A universal tool milling machine by Friedrich Deckel, overhauled in 2008 and originally built in 1989, is available. Travels X/Y/Z: 560mm/500mm/450mm, table dimensions X/Y: 900mm/530mm, max. table load: 450kg, tool taper: SK40, quill stroke: 80mm, milling head swivel: +/-90°, spindle speed: 4000rpm, feed rate: 3.6m/min, rapid traverse: 4m/min. Machine dimensions X/Y/Z: 2350mm/2200mm/2000mm, weight: approx. 2200kg. Documentation available. An on-site inspection is possible. Hnjdpezqu E Hefx Andju

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Universal milling machine Deckel FP4M with 3-axis digital display Heidenhain ND780 in special light gray paint finish with CE approval!!! Technical data: >> Year of manufacture 1986, machine no. 2203-2471 >> Fixed angular table (newly planed) >> Speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse rate 1300 mm/min >> Travel ranges X/Y/Z: 500/400/400 mm >> Vertical milling head on spindle support, adjustable by 150 mm >> Vertical quill and horizontal quill - SK40 >> Vertical quill extendable by 90 mm Hjdpfxjz A S Rne Andonu >> Clamping system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3-axis digital display Heidenhain ND780 >> Coolant system >> Chip tray >> Central lubrication About the machine: Offered is a Deckel FP4M universal milling machine with CE conformity in very good condition. The machine has been partially overhauled, has little backlash, and all spindles move easily and smoothly. Even at maximum speeds, the milling machine runs smoothly. Rapid traverse in all axes, the bellows are all new. The fixed angular table has been newly planed. A reliable and user-friendly machine. An oil change has been performed. Mechanically and electrically inspected. The digital display from Heidenhain makes working easier and even more precise. Take the opportunity to inspect and test the machine on-site while it is powered up.

Condition: used, Univ. universal milling machine DECKEL, Type FP 1 Machine No. 33064, Year of manufacture approx. 1960, overhauled in 2012 Travel distances: X: 300 mm, Y: 150 mm, Z: 330 mm Table size: 600 x 210 mm Hnodedzp T Espfx Andeu Spindle mount: MK 4 - S20 x 2 Spindle speed, vertical: 95-1900 rpm, 12 steps Spindle speed, horizontal: 60-1200 rpm, 12 steps Motor power: 1.1 and 1.4 kW Power connection: 380 Volts, 50 Hz - Feed in the X and Y axes - Quill movement on the vertical milling head - Fixed angle table - Coolant system with mechanical pump in the machine base - Adjacent control cabinet with cable plug connection Space required L x W x H: 1100 x 900 x 1600 mm Weight: approx. 900 kg Good condition Machine was overhauled in 2012.

Condition: used, Universal Tool Milling Machine with Digital Readout DECKEL Type FP 1 Universal Milling Machine Machine No.: 2102 - 3322 Year of manufacture: 1986 Travel range X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle mount: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed rate: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis active digital readout HEIDENHAIN Type TNC 113 - Infinitely variable feed on X, Y, and Z axes Hodsr D T Uyopfx Andonu - Spindle speed selectable via 2 motor speeds and 8 gearbox steps - Quill movement on vertical milling head: 60 mm - Vertical milling head swivels and is extendable by 100 mm horizontally - Fixed angle table 600 x 210 mm - Coolant system integrated in machine base - Separate electrical cabinet - Original chip tray for mounting on the machine base - Operating manual, electrical diagram, spare parts list included Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 LV Active Year of manufacture: 1988 - overhauled, repainted RAL7035 light gray / RAL7012 basalt gray RAL5008 gray blue Mach. no.: 2309-0146 Milling head type: 2271 Milling head number: 700-0887 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 - Fixed table 1,390 x 550 mm (T-slot: 16 mm) - Vertical milling head SK 40 with drawing thread M 16 Hnedpfxotdnb Ee Andju - Central lubrication, manually operated - Coolant system - Operating instructions Used as seen The machine is technically as it was built at the time.

Condition: not inspected (used), Year of construction: 1986, feed length X-axis: 580 mm, feed length Y-axis: 400 mm, feed length Z-axis: 450 mm, spindle speed (max.): 2,500 rpm, Grunding Contour 2 table 800x460 mm travel 580x400x450 mm max spindle speed 2500 rpm spindle taper 40 Hnjdpfx Asy E N Dvsndju

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Manufacturer: DECKEL Model: FP 4 M Aktiv Year of manufacture: 1988 – overhauled, newly painted RAL 7035 light gray / RAL 7012 basalt gray RAL 5008 gray-blue Machine no.: 2203-7097 Hnodpfx Anelfc U Dodeu with warranty Geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN TNC 113 - Fixed table 800 x 460 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamping DIN 2080 - Chip collection tray - Central lubrication, electric - Coolant system - Operating manual Used, as is The machine is technically in the condition corresponding to the year of manufacture.

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Hedpfowid Spex Andonu Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: good (used), Year of construction: 1964, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 200 rpm, spindle speed (min.): 40 rpm, input frequency: 50 Hz, Manufacturer: Deckel Type: FP2 Tool holder: SK 40 Travel ranges X/Y/Z: 500 / 200 / 400 mm Speed range: (18 steps) 40 - 2000 rpm Spindle stroke, vertical: 60 mm Spindle stroke, horizontal: 100 mm Feed rates: 8 - 400 mm/min Table size: 700 x 300 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg Space requirement L x W x H, approx.: 1200 x 1250 x 1670 mm Hjdpfjilg H Eex Andsnu Head swivels: 90° / 90° Equipment: - 3-axis digital display - Coolant system We would be happy to demonstrate the machine in operation at your location. All information is subject to change without notice. Subject to prior sale.