Used Deckel G1L for sale (679)

Year of construction: 1969, condition: good (used), Work table Clamping surface 500 x 200 mm distance milling spindle - work table 300 mm longitudinal movement of the table by hand 300 mm Pjdpfx Adsidckfoijrd transversal movement of the table by hand 160 mm template table stencil table 550 x 324 mm distance pantograph arm - clamping surface 20 mm Rotatable 360 stencil grooves 7 pcs., distance 45 mm Milling spindle spindle speed 1.900 - 15.000 rpm cutting speed 1 - 226 m/min motor speed 2.800 rpm Internal taper of the graver spindle 1:5 Gr. bore of the collet 6 mm Adjustability of the spindle 1 mm fine, 3 mm coarse Pantograph Transmission ratio 1 : 1 to 1 : 50 driving power 0,2 kW Dimensions Required area L x W x H 1400 x 1000 x 1420 mm Weight 260 kg Accessories / special features: - 1 set of fonts with letters and numbers - stylus

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: MILLPLUS iT HEIDENHAIN, table load: 800 kg, 5-axis simultaneous machining center! TECHNICAL DETAILS X travel: 1,250 mm Y travel: 710 mm Z travel: 710 mm Table size: 1,500 x 800 mm Table load capacity: 800 kg Spindle speed: 12,000 rpm Spindle motor: 15 / 10 kW Spindle taper: SK 40 Tool changer: 60 positions MACHINE DETAILS CNC control: MILLPLUS iT HEIDENHAIN Prsdpfx Adoxwlgzjijd Total power consumption: 44 kVA Dimensions & Weight Footprint: approx. 3.5 x 2.65 x 2.65 m Machine weight: approx. 10.5 t EQUIPMENT B-axis (-120 / +30) NC rotary table integrated into fixed table Direct measuring system 3D probe infrared HEIDENHAIN TS 640 Coolant system 40 bar, 600 l Rinsing gun Chip conveyor 3D Quickset software Note: The machine is fully functional. The rotary table and X-axis produce noise.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 1153 000006 3, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller model: Siemens 840 D Solutionline (PCU 50), spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,000 mm Feed rate X, Y, Z-axis: 20 - 60,000 mm/min Rapid traverse X, Y, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 /min Max. table rotation: 30 rpm Max. workpiece diameter: 1,250 mm Max. workpiece height: 1,580 mm Prsdpfjxvz Edex Adijd Max. workpiece weight: 1,500 kg Clamping area: 800 x 800 mm Pallet weight: 570 kg Spindle speed: 20 - 8,000 rpm Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions MACHINE DETAILS Control: Siemens 840 D Solutionline (PCU 50) Dimensions & Weight Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Required space: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Operating hours "Counter external 2 (read off)": 60,197 h EQUIPMENT Chip conveyor with coolant tank Coolant/lubrication system 4x machine pallets Tool magazine Oil mist extraction unit Length measuring system Y-axis (new spare part) Lubrication unit 230V 0.12 30bar (new spare part) Gear unit ZAHNRADP-AGG*MKF1-KW2-20036 (new spare part) Cyclo gearbox*F1C-A25 (new spare part) Retrofit kit for power module (new spare part) Lifting devices for the machine

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: Heidenhain Mill Plus, table width: 500 mm, table length: 500 mm, rotary table diameter: 500 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,618 h, coolant supply: 40 bar, spindle nose: SK40 (DIN69871), number of slots in tool magazine: 60, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The 5-axis DMU50 eVolution has been removed from production in working order and can also be seen in operation in our showroom (by appointment). Pjdpfxoxnixis Adisrd The machine is equipped with 40 bar internal spindle cooling, chip conveyor, 60-tool changer, Renishaw tool setter, Heidenhain 3D probe, 18,000 RPM spindle, Visiport, and original factory extraction system.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 24,243 h, Control Unit Brand HEIDENHAIN Model TNC 530 Main Drive Number of axis 4 Tools Number of index 100 Type of tool holder HSK 63 Additional Equipment 40 bar IKZ Pjdpexz H Rpefx Adijrd This 4-axis DMG DECKEL MAHO DMF 300 was manufactured in 2003. It features a vertical machining center with 100 ATC tools, HSK 63, and a 40 bar IKZ. Consider the opportunity to buy this DMG DECKEL MAHO DMF 300 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: used, functionality: fully functional, Friedrich Deckel Grinder Podpfexzpq Sjx Adiord Model S1 In good condition

Condition: used, Year of construction: 1982, x-travel 300 mm Psdpfxjvvnfus Adierd y-travel 160 mm z-travel 340 mm feeds -stepless- 5-500 mm/min rapid traverse 1200 mm/min spindle turning speed range 40 - 2000 U/min tool taper Normkegel 40 table length 600 mm table width 120 mm voltage 380 V frequency 50 Hz rated current 13 A weight of the machine ca. 0,750 t dimensions of the machine ca. 1,8 x 1,5 x 1,8 m DESCRIPTION Machine incl: active three-axis digital readout HEIDENHAIN documentation various tool holders Machine vice etc.

Condition: used, Year of construction: 2006, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 U/min power capacity - main spindel 9 / 13 kW Torque 57 / 82 Nm tool taper SK 40 table surface area 630 x 500 mm Tilting area -5 / +110 ° Predpevanqxefx Adied max. table load 200 kg T-slots 14 H7 T-slot - distance 63 mm C-Axis +/- 360 ° rapid travel ( X / Y / Z ) 12 m/min feed speeds 10.000 mm/min Tooling 16 pos. max. tool weight 6 kg max. tool length 300 mm max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm tool taper SK 40 total power requirement 17 kVA weight of the machine ca. 3,6 t dimensions of the machine ca. 3,0 x 3,0 x 2,5 m Tool Room Milling Machine - Universal DECKEL MAHO - DMU 50 - 5 Axis (3+2) - only 10.071 Spindle Hours - WITHOUT tools

Condition: used, Year of construction: 1979, x-travel 300 mm y-travel 160 mm z-travel 340 mm spindle taper ISO 40 spindle turning speed range 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1200 mm/min creep feed 4 mm/min control Heidenhain TNC 113 total power requirement 1,6/2 kW weight of the machine ca. 570 kg dimensions of the machine ca. 1,2 x 1 x 1,75 m with active digital display "Heidenhain TNC 113", for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. Prsdpjviyf Hsfx Adied We ask private interested parties to refrain from making an inquiry, as this is a well-maintained professional machine and usually exceeds the budget of hobby mechanics, including VAT. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 6 m/min, controller manufacturer: Heidenhain, controller model: TNC 426/430M, overall weight: 3,000 kg, spindle speed (max.): 9,000 rpm, operating hours of spindle: 10,292 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 16, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, This Deckel Maho DMU 50T comes from a training department and has therefore never been used as a production machine. The machine is accordingly in a very tidy condition, and both the axes and spindle still run very smoothly! Equipped with Heidenhain electronic handwheel. Predpsxzf Erjfx Adijd Dimensions: 2200x2200x2300 mm (LxWxH) Weight: approx. 3000 kg

Condition: ready for operation (used), Year of construction: 2002, Control Unit Brand HEIDENHAIN Main Drive Number of axis 3 Tool taper SK 40 Psdoxzvt Hopfx Adiord This 3-axis DECKEL MAHO 64 V linear was manufactured in 2002. It features an SK40 tool holder and a 30-tool automatic tool changer. The machine includes a paper band filter. Note, the probe requires servicing due to a communication error. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO 64 V linear machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2007, Suitable for regrinding and remaking all types of woodworking and metalworking tools Accessories: Full enclosure, Pickup loader, disc magazine Ø approx. 350 mm, workpiece Ø max. 50 mm 8-position grinding wheel changer Direct measuring system with glass scales on all linear axes A-axis with torque drive for cylindrical grinding NUMROTO 3D simulation NUMROTO 3D collision monitoring NUMROTOplus simple milling cutters NUMROTOplus extension for complex milling cutters NUMROTOplus standard drills, step drills NUMROTOplus extension for complex drills, step drills NUMROTOplus extension for differential helix NUMROTOplus form milling cutters NUMROTOplus extension for cylindrical grinding Fast TCP/IP data interface Electrostatic fume separator LTA, Automatic fire extinguishing system Fixed coolant ring on the grinding head with up to 12 adjustable nozzles Additional Coolant supply at the dividing head Oil drip tray 2 grinding wheel holders X-axis grinding stroke: 400 mm Prjdpfx Adsxxquyeiod Y-axis grinding stroke: 310 mm Z-axis grinding stroke: 305 mm C-axis swivel range: 224° A-axis speed: max. 850 rpm Maximum workpiece diameter: about 250 mm workpiece length max.: approx. 900 mm Maximum workpiece length during face grinding.: about 400 mm grinding length max.: 400 mm Workpiece holder: ISO 50 Grinding spindle speed infinitely variable: 1000 to 8000 rpm Drive power grinding spindle: 15 kW Connected load approx.: 400 V / 50 Hz / 22 kVA Dimensions W x D x H approx.: 2350 x 3300 x 2150 mm Weight approx: 4000 kg colour: Gray

Condition: used, Year of construction: 1999, x-travel 600 mm Psdpfx Adsxzk Rysijrd y-travel 560 mm z-travel 560 mm weight of the machine ca. 8500 kg

Condition: used, Year of construction: 2010, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Heidenhain iTNC 530 tool taper SK 50 number of tool places 120 Pos. On-time hours ca. 66737 h spindle hours ca. 36316 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Fully protective cabin with sliding doors and interior lighting - Setup room - Tool measurement in the work area with BLUM laser - 3D measuring probe - Operating modes 3 bar internal coolant supply with 600 l tank and paper belt filter - Chip flushing gun with 1 bar/ l pump - Chip conveyor - Brankamp monitoring system - 3-color signal light - Coolant ring nozzle - Blow-air cooling system - Coolant system - Oil/emulsion mist separation system - Control cabinet cooling unit - Operating manuals Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Podpfxexylqxs Adiord Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Predpfxsxwuu Ij Adiod Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: good (used), DECKEL Milling Machine, Tool Milling Machine DMU 35 M 3 x 2-axis CNC milling machine With SIEMENS 810 D – ShopMill software Year of manufacture: 2001-2003 Travel distances X/Y/Z: 350 x 240 x 340 mm Infinitely variable spindle speed: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Drawbar: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: 55/80 Nm max. Universal swivel/rotary table: 400 x 290 mm Table load capacity: 100 kg Distance spindle nose to table: min./max. 145/485 mm Feed rates: 3,000 mm/min Rapid traverse: 5,000 mm/min Input increment: 0.01 mm Rotation range: 360 degrees Predpfxjxz Rdae Adiod Swivel range: degrees Total power requirement: kVA Weight: approx. 1,750 kg Technical data subject to change! Equipment / Accessories: Direct position measuring system for 3 axes Spindle drive via servo motor with toothed belt 2 gearbox stages Full safety enclosure with sliding door Swiveling control panel Coolant nozzles on vertical head Coolant system Chip tray with coolant tank Electronic handwheel Machine feet Machine lamp Interface Serial RS232C, LAN (RJ45) The machine is perfect for prototyping, toolmaking, training, mechanical workshops, gunsmiths, etc. It impresses with its versatility, with the additional manually operated rotary-swivel table allowing 5-sided machining. Available in March 2026 A total of 3 machines are available. Condition: Good to very good from a vocational training center, see pictures

Condition: ready for operation (used), Year of construction: 1999, Control Unit Brand HEIDENHAIN Model 426m Main Drive Prjdpfxoxzvr Nj Adisd Number of axis 3 Movement X-Axis Movement 800 mm Y-Axis Movement 650 mm Z-Axis Movement 550 mm Additional Equipment Vise Angle table Various mounts Royal presetting device This 3-axis DECKEL MAHO DMU 80E was manufactured in 1999 and features a Heidenhain 426m control, travel distances of X 800mm, Y 650mm, and Z 550mm. It includes a 24-fold changer and an internal hard drive. Installation dimensions are approximately 2x3m. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMU 80E machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of manufacture: approx. 1967 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40–2000 rpm, 16 steps Motor power 1.0 and 1.6 kW, pole-changing Power supply 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at vertical milling head 60 mm - Swiveling, rotating, and tilting angle table - Coolant pump in machine base Prodpfx Adsghtvaeijd - Separate control cabinet Space requirements L x W x H 1100 x 1100 x 1600 mm Weight 690 kg In good condition

Condition: excellent (used), Year of construction: 1986, machine/vehicle number: 815, total height: 1,900 mm, total length: 1,400 mm, total width: 900 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 2,000 rpm, overall weight: 600 kg, table length: 500 mm, table width: 200 mm, Equipment: rotational speed infinitely variable, TECHNICAL DETAILS: - Serial number: 815 - Operating voltage: 380 V - Frequency: 50–60 Hz - Rated current: 14 A - Table dimensions: 500 x 200 mm WORKING RANGE & CAPACITY: - Universal dividing head center height: 170 mm - Tailstock center height: 120 mm (with intermediate support: 170 mm) Prsdpfswxrfpsx Adisd - Max. workpiece length between centers: 336 mm - Workpiece diameter with unsupported mounting: approx. 600 mm - Max. center length: 950 mm - Internal taper of indexing spindle: Morse 4 / Unified 40 - T-slots: 12 mm (machine base), 8 mm (additional elements) TRAVEL & ADJUSTMENTS: - Sharpening stroke: 190 mm - Cross travel of tool holder: 100 mm - Vertical movement of grinding head: 325 mm - Tool holder: 230 mm - Indexing device on tool slide: 330 mm ROTATION / SWIVEL RANGES: - Grinding head mounting / tool holder / grinding head / universal headstock: 360° DRIVE & SPEEDS: - Three-phase motor: 0.7 / 0.85 kW - DC motor: 1.3 kW - Spindle speed: 4000 / 8000 rpm (dual speed) - Stepless DC: 2000 – 10000 rpm ACCESSORIES: - Includes two-axis digital readout - Extensive accessories set suitable for the machine

Condition: like new (used), Year of construction: 2013, operating hours: 39,945 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain iTNC 530, total height: 2,900 mm, total length: 5,500 mm, total width: 2,650 mm, spindle speed (min.): 28,000 rpm, coolant supply: 40 bar, Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Prodpfxsxv Av Rj Adijd Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter 3D quickSET Arrangement for external pallet management Accuracy package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Toolholders are not included Tools are not included Paper band filter Machine running times Under power: 62983 Spindle Working: 39945 Rated power kVA: 60 Basic machine dimensions / weight Length mm: 5500 Width mm: 2650 Height mm: 2900 Weight kg: 9500 + system 3R

Condition: excellent (used), Year of construction: 2000, Heidenhain MillPlus control system Pjdpfx Asr Hrwxjdierd Travel X/Y/Z: 630/560/560 mm Spindle speed 12,000 min-1 Magazine for 20 tools SK 40

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand SIEMENS Model 840D Powerline Main Drive Number of axis 4 Tools Type of tool holder HSK63 Additional Equipment Pjdpoxy Ti Aefx Adierd Pallet changer: RS4 Tool magazine: Omron This 4-axis DECKEL MAHO DMC 70H duoBlock was manufactured in 2008. A robust horizontal machining centre, it offers advanced capabilities for complex machining tasks. Consider the opportunity to buy this DECKEL MAHO DMC 70H duoBlock horizontal machining centre. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 1997, Heidenhain Mill-Plus control system Travel paths X/Y/Z: 500 x 380 x 380 mm Pjdpovu Slpofx Adijrd Clamping surface 500 x 400 mm Tool magazine for 24 tools, SK 40 Speed 8,000 min-1 NC rotary and swivel table Chip conveyor

Condition: excellent (used), Year of construction: 2002, Control Siemens Sinumerik 840D Travel paths X/Y/Z: 560 x 560 x 510 mm Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Tool magazine for 40 tools, SK 40 Podowrt Rmopfx Adisrd Paper filter Chip conveyor

Condition: excellent (used), Year of construction: 2008, Control Heidenhain iTNC 530 Travel X/Y/Z 750/600/560 mm Speed 18000 1/min Predpfjvcyixex Adiod Tool magazine for 30 tools HSK 63 IKZ 80 bar Clamping area 950 x 650 mm Air-conditioned interior Measuring probe suction unit Chip conveyor Numerous tool holders