Used Deckel G1L for sale (702)

Condition: good (used), Year of construction: 2005, operating hours: 15,742 h, functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: Heidenhain, controller model: 530, spindle speed (max.): 18,000 rpm, DMC 64V linear / Year of manufacture 2005 Heidenhain control 530 3-axis machining center 30-position tool changer Travel: X640mm (linear drive) Y600mm Z520mm Spindle: SK40 Max. speed: 18000 rpm Max. feed rate: 40000mm/min Bwedoy Iw H Repfx Al Iel

Condition: used, Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25 30 0000 100 01, For sale is this Deckel S11 tool grinding machine. Comprising: - 1 Deckel S11 universal tool grinding machine, year of manufacture 1988, machine no. 1115, painted green RAL 6011 - 1 dividing head SK40 - 1 thread and clearance grinding attachment - 1 grinding wheel dressing device - 1 machine lamp - 1 dust extraction unit - 1 IPM video measuring system, consisting of color camera, zoom lens with 10–110x magnification, screen with digital readout of travel paths, backlight, incl. software - 1 optoelectronic measuring device, prepared for the video measuring system - 1 set of collets, 20 mm shank, 1–18 mm clamping diameter - 1 set of collets, 10 pcs, 6–25 mm - 1 collet sleeve - 1 tooth rest - 3 grinding wheel safety covers - 1 setting gauge The machine is in limited working condition: Bsdpfxjyq Nrio Al Iewl - Occasional spindle speed fluctuations - The precision of the tool holding device should be checked and possibly overhauled

Condition: ready for operation (used), Year of construction: 2002, operating hours: 24,396 h, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 600 mm, table length: 850 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 4, This 4-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2002. It features a travel of 640 mm on the X-axis, 600 mm on the Y-axis, and 500 mm on the Z-axis. The machine has a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 64V linear vertical machining centre we have for sale. Contact us for further details. • Condition: Used (good) • Operating hours: 24396 h • Electrical: • Nominal power: 39 kVA • Voltage: 400 V • Frequency: 50 Hz • Secondary voltage: 230 V • Control voltage: 24 V • Current: 63 A • Current (max): 56 A • Rapid traverse: • X: 70 m/min • Y: 40 m/min • Z: 40 m/min Bsdpfsyz Tkfjx Al Ijwl

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,500 mm, table load: 400 kg, spindle speed (max.): 18,000 rpm, number of axes: 4, This 4-axis DECKEL MAHO DMU-60T was manufactured in 2005. It features a robust vertical machining centre with X, Y, Z travels of 630 mm, 560 mm, and 560 mm respectively. Equipped with a high-speed spindle up to 18,000 rpm and a HSK-63A taper, it ensures precision and efficiency. The machine includes a Heidenhain MillPlus CNC control and a 20-tool magazine. Consider the opportunity to buy this DECKEL MAHO DMU-60T vertical machining centre. Contact us for further details regarding this machine. • Table size (L x W): 1000 x 600 mm • CNC control: Heidenhain MillPlus • Tool magazine capacity: 20 tools • Through-spindle coolant: Yes Additional equipment Bwjdpfex D I Ibox Al Iel • Chip conveyor Dimensions Machine Depth 3000 mm

Condition: ready for operation (used), Year of construction: 2005, operating hours: 18,700 h, controller manufacturer: SIEMENS, controller model: Sinumerik, table load: 3,100 kg, overall weight: 24,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 35,000 W, tool weight: 6,000 g, number of axes: 3, This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2005. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information. Additional equipment • Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open Machine Benefits Technical Machine Benefits • Feed speed: up to 20000 mm/min • Clamping surface: 3100 × 900 mm • T-slots: 9 pieces, 100 mm apart • Tool magazine capacity: 30 places • Resolution of measuring system: 0. 001 mm • Electrical connections: mains connection 3n/pe~400/230 v, 50/60 hz; power consumption 82 kva • Pneumatics: compressed air 5. 5-8 bar; air volume 25 m³/h (without cooling), +20 m³/h with cooling • Weight (kg): with accessories: up to 29280 kg Bedpsx Nr Tuofx Al Ijwl Extra Information Room Temperature: +15°C to +35°C Humidity: 20-75% Tool magazine size 120 -Magazine cabinet -Tool change is performed via a shuttle -Tool holder only on request and subject to availability (extra) -Machine is a 3-axis machine (rotary table not available) A further configuration or the AB is no longer available. Z-axis brake defective, roller shutter in machine room defective, screen cable defective, display defective (loose connection)

Condition: used, Year of construction: 1999, x-travel 500 mm y-travel 400 mm z-travel 400 mm Bsdpfx Aley Aa Nke Iswl control Heidenhain weight of the machine ca. 3200 kg

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 20031, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, input voltage: 380 V, We offer this used Deckel Contour 3 tool milling machine, year of manufacture 1987. Control system: 6004 50 009302 00 Serial number: 20031 Year of manufacture: 1987 Wiring diagram: 6003 90 077302 00 Operating voltage: 380 V Frequency: 50/60 Hz Rated current: 23 A Control voltage: 24 V Maximum fuse: 35 A The machine is equipped with a rotary table and a tool changer. Bwedpfey Hfc Rjx Al Isl If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2005, Technical details: x-travel: 800 mm y-travel: 700 mm z-travel: 600 mm table load capacity: 800 kg control: SIEMENS 840D shopmill turning speeds: 12.000 1/min tool adaptor: HSK 63 rapid traverse: 50 m/min tool change unit: 30 Pos. electr. connected load with add. coolant: 56 kVA weight of the machine ca.: 9,5 t transport measurements machine: 4 x 2,5 x 2,75 m 5 Axis simultaneously machining center, Baxis (NC-head) and NC- rotary-swivelling-table dia 900/630mm, internal cooling device 40 bar, 600l prepared for 3D-touchprobe HEIDENHAIN TS 641 (without touchprobe), prepared for el. handwheel (without handwheel), mode 4, Bsdjy Ai Naopfx Al Iswl approx. 85.000 h mainswich ON , approx. 55.000 h Spindle ON (last spindle change in nJuly 2021 at approx. 50.000h) *

Condition: ready for operation (used), machine/vehicle number: 46436, Travel distances: longitudinal: 400 mm vertical: 400 mm horizontal: 200 mm Features: - Sliding vertical milling head - Tilting angle table 260 x 600 mm - Various tool holders - Setup elements Bwsdpfx Aloygia Es Ijl - Rotary table D:280 mm - Documentation Condition: workshop-tested

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 9585, DECKEL Universal Milling and Drilling Machine Bwodeygicaepfx Al Isl Model: FP 2 Machine No.: 9585 Year of manufacture: 1978/79 Condition: Good, operational condition Travel distances: longitudinal: 400 mm vertical: 400 mm horizontal: 200 mm

Condition: ready for operation (used), Year of construction: 2003, operating hours: 62,469 h, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, number of axes: 5, This 5-axis DECKEL MAHO DMU 70 eVo was manufactured in 2003. It features a Heidenhain iTNC 530 control, HSK 63 tool interface, and a spindle speed of 18,000 rpm. The machine offers a tool magazine with 32 positions and a robust coolant system with a 280-liter capacity. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 70 eVo machine we have for sale. Contact us for more information about this machine. • Working hours (as of 04.07.2023): • Operating hours: 62,469 h • Spindle hours: 17,307 h • Rotary/Swivel axes: • C-axis indexing: 360° • B-axis indexing: 0–180° • Workpiece: • Max. workpiece diameter: 700 mm • Tool system: • Tool magazine: 32 positions • Coolant system: • Coolant tank capacity: 280 liters • Coolant type: Alusol SL 51 XBB • Cooling method: External coolant supply Bjdpoydlacjfx Al Iowl • Rapid traverse (X/Y/Z): 50 m/min Additional equipment • Touch probe: TS 641

Condition: used, Year of construction: 2008, operating hours: 6,848 h, functionality: fully functional, machine/vehicle number: 11580008023, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: Heidenhain iTNC 530, total height: 2,260 mm, total length: 22,950 mm, total width: 2,100 mm, table width: 600 mm, table length: 1,000 mm, table load: 200 kg, rotary table diameter: 600 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 3,000 rpm, overall weight: 6,000 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 24, tool length: 315 mm, tool diameter: 130 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Deckel Maho DMU 60 is a universal 5-axis CNC machining center designed for precise milling and complete machining of complex components. This machine is part of the renowned DMU series by DMG Mori (formerly Deckel Maho) and is widely used in toolmaking, mechanical engineering, mold making, as well as the aerospace industry. Thanks to the swiveling milling head (B-axis) and NC rotary table (C-axis), workpieces can be machined on five axes, enabling the production of complex geometries in a single setup. Previous application conditions: General machine/tool parts in steel, aluminum, cast iron, etc. Heidenhain iTNC 530 control HSK-A 63 tool holder Bwodpfx Asyt Ibnel Ijl The stated price is exclusive of dismantling, packaging, and shipping. Sale is from location, subject to prior sale. The machines are sold in used condition; any warranty and guarantee are excluded.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: Siemens, controller model: Sinumerik, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 30, DMG MORI DMC 1035 V – Well-Maintained Vertical Machining Center with Low Operating Hours For sale is a very well-preserved vertical machining center, DMG MORI DMC 1035 V, manufactured in 2008. The machine stands out due to its excellent condition, comparatively low machine hours, and the proven Siemens Sinumerik control system. It is ideally suited for precise milling tasks in both single-part and series production. Machine Data and Features: - Year of manufacture: 2008 - Spindle/machine hours: see photo - Tool magazine: 30 positions - Spindle speed: 14,000 rpm - Tool holder: SK40 - No internal coolant supply (IKZ) - Control: Siemens Sinumerik - Electronic handwheel Bwjdpfjy H I Ehox Al Iel - Smooth operation and technically reliable - Exceptionally low use for its year Maintenance and Condition: The following components have been renewed in recent years: - Cover louvres of the X-axis left and right - Interior lighting Accessories / Scope of Delivery: - No vices - No tool holders or tools included This DMC 1035 V is a solid and durable DMG MORI machine, providing a cost-effective solution for professional applications. The machine is ready for immediate use. If you are interested or have any questions, please do not hesitate to contact us. You are welcome to contact us anytime via message or telephone.

Condition: reconditioned (used), Year of construction: 1998, Tool Grinder Make: Deckel Model: S0 Year of manufacture: 1998 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey Machine no.: 26230 Warranty: 12 months single-shift from delivery. For machines located outside our North Bavarian sales area, travel costs Bjdpfx Aey Drkcjl Iswl are to be covered by the customer. Accessories: - Grinding wheel with flange - Operating manual Including new electrics On/Off switch in new enclosure with undervoltage release coil to provide restart prevention (e.g. in case of power failure or unplugging the machine) Sold as seen Technically, the machine corresponds to the state of the art at the time of its year of construction.

Condition: used, control Dialog 4 x-travel 400 mm y-travel 315 mm z-travel 400 mm spindle tunring speed 3.150 U/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved. Bwsdpfx Aljyyqp Ao Iol

Condition: used, x-travel 400 mm y-travel 200 mm z-travel 400 mm turning speeds 40 - 2.000 U/min tool taper SK 40 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Bwsdpoyyqpvsfx Al Ijl Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table length: 1,600 mm, table width: 1,400 mm, table load: 3,500 kg, Equipment: documentation/manual, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Spindle motor: 28/19 kW Magazin capacity: 120 Required floor space: 11200x12300 mm Bwjdpfx Aoyu Twkol Iol Height: 4375 mm Weight: 58000 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 80 monoBlock With Heidenhain iTNC 530 path control Year of manufacture: 2005 Bedpfoy A Sf Rsx Al Iowl Travel distances: X 980 Y 630 Z 630 Speed range: 0 – 18,000 rpm stepless (HSK 63) With the following accessories: Rigid angle table, 1250 mm x 700 mm clamping surface 3D measuring probe Heidenhain Tool measurement in the working area via BLUM Laser Vertical tool changer with 32 magazine slots (HSK 63) Full protection enclosure with sliding doors and internal lighting Electronic handwheel Operating modes 3 + 4 Chip conveyor Coolant system 3 height-adjustable machine mounts Spindle oil cooler Control cabinet cooling unit (Rittal) Operating manuals

Condition: reconditioned (used), Year of construction: 2026, functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 150 mm, feed length Z-axis: 340 mm, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, feed rate X-axis: 500 m/min, feed rate Y-axis: 500 m/min, feed rate Z-axis: 500 m/min, quill stroke: 80 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, table length: 600 mm, table width: 210 mm, total height: 1,750 mm, total length: 1,400 mm, total width: 1,600 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 800 kg, table load: 200 kg, space requirement width: 1,600 mm, space requirement length: 1,400 mm, space requirement height: 1,750 mm, Equipment: CE marking, documentation/manual, The machine was overhauled/partially overhauled by our workshop in 2026 and, in the same process, retrofitted for CE conformity. The machine is in excellent condition. Complete machine in CE standard version. A CE declaration of conformity has been issued for the machine, with FPS Werkzeugmaschinen GmbH assuming responsibility as the manufacturer. As a result, the machine meets the requirements of the German Industrial Safety Regulation (Betriebssicherheitsverordnung – BetrSichV). The year of manufacture therefore corresponds to the date of the CE retrofit. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 - New CE switch cabinet (in accordance with current regulations of professional associations) - Safety brake motor: the milling spindle comes to an immediate stop upon reaching zero speed. Control 3-axis – Active – Digital display Spindle speed 40-2000 rpm, geometrically stepped direct-drive gearbox with 18 speed stages for maximum torque and milling performance Feed rate 5 to 500 mm/min, steplessly adjustable Rapid traverse 1.2 m/min Quill Extendable quill, vertical 80 mm, SK40 with M16 drawbar thread, optionally with DECKEL saw thread S20 x 2 Axes X/Y/Z 300/150/340 mm Table Fixed angle table 600 x 210 mm Bwodpfx Aoy I Trpel Isl Maximum table load: 200 kg Equipment • Vertical and horizontal spindle • Milling head manually swivelable +/- 90° • Z-axis bellows Options • Chip tray • Machine light • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • and more.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller model: TNC 426 Heidenhain, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel Distance X-axis: 1,250 mm Travel Distance Y-axis: 880 mm Travel Distance Z-axis: 800 mm Main Spindle Max. Speed Range: 12,000 rpm Drive Power: 15 / 10 kW Bwsdpfoyxmmnox Al Isl Max. Torque: 500 Nm Tool Holder: SK 40 Work Table Clamping Surface: 1,500 x 1,050 mm Max. Table Load: 2,500 kg Number of T-Slots: 10 T-Slot Width: 18 H7 mm T-Slot Spacing: 100 mm Tool Changer Number of Tool Stations: 30 Max. Tool Diameter: 80 mm Max. Tool Diameter with Adjacent Empty Pocket: 160 mm Max. Tool Length: 315 mm Max. Tool Weight: 8 kg Max. Total Tool Weight: 100 kg Feed Rates Rapid Traverse (X / Y / Z-axis): 15 m/min Feed Rate: 10,000 mm/min MACHINE DETAILS Control Model: TNC 430 Heidenhain Total Power Requirement: 29 kW Dimensions & Weight Space Requirement: approx. 7.0 x 5.0 x 3.3 m Machine Weight: approx. 16.0 t Transport Dimensions: 4.00 x 3.08 m EQUIPMENT Documentation Chip Conveyor Coolant System High-Pressure Cooling Measuring Probe (Manufacturer: Heidenhain) Internal Coolant Supply Note: Transport rigging must be organized by the buyer!

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller model: TNC 430 Heidenhain, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,250 mm Travel range Y-axis: 880 mm Travel range Z-axis: 800 mm Main spindle Max. speed range: 12,000 rpm Drive power: 15 / 10 kW Max. torque: 500 Nm Tool holder: SK 40 Work table Clamping area: 1,500 x 1,050 mm Max. table load: 2,500 kg Number of T-slots: 10 T-slot width: 18 H7 mm T-slot spacing: 100 mm Tool changer Number of tool stations: 60 Max. tool diameter: 80 mm Max. tool diameter with free adjacent station: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Max. total weight: 100 kg Feeds Rapid traverse (X / Y / Z-axis): 15 m/min Feed rate: 10,000 mm/min MACHINE DETAILS Control model: TNC 430 Heidenhain Total power requirement: 29 kW Dimensions & Weight Space requirements: approx. 7.0 x 5.0 x 3.3 m Machine weight: approx. 16.0 t Bwodoyxmd Topfx Al Iol EQUIPMENT Documentation Chip conveyor Coolant system Tool changer Note: Transport tackle must be organized by the buyer!

Condition: excellent (used), Year of construction: 2005, x-travel 835 mm y-travel 510 mm z-travel 510 mm CNC-control SIEMENS table-size 1000 x 560 mm max. table load 800 kg spindle taper SK 40 spindle turning speed range 20 - 8.000 U/min feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min drive capacity - spindle motor 13 / 9 kW tool change unit 20 Pos voltage 380 V total power requirement 35 kVA Bwodpfoyxxyyox Al Iel weight of the machine ca. 4,5 t dimensions of the machine ca. 3,50 x 3,50 x 2,70 m - Serial-No.: 15415015634 - Main spindle NEW bearings - Machine ON: 18,484 h Program ON: 9,153 h - SIEMENS control system - With NC sub-unit (4th axis, controlled via M-code) - Chip tray (no chip conveyor) - Coolant system

Condition: used, Year of construction: 1989, x-travel 300 mm y-travel 300 mm z-travel 400 mm CNC-control DIALOG 11 spindle taper ISO 40 spindle turning speed range 31 - 5.000 U/min table-size 620 x 390 mm table load 250 kg Bwjdpfx Aex Ndbqel Iel power capacity 5,5 kW feeds -stepless- 2 - 6.000 mm/min quill stroke 80 mm voltage 380 V total power requirement 11,0 kVA weight of the machine ca. 1,65 t dimensions of the machine ca. 1,85 x 1,90 x 1,80 m electric cabinet 1,35 x 0,70 x 1,70 m - Serial-No.: 2836-0175 - control: DIALOG 11 - electrical hand wheel - horizontal milling spindle - coolant equipment

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 25 rpm, year of last overhaul: 2026, Dear Sir or Madam, We are offering for sale a Deckel FP2 Aktiv. This newer model is particularly notable for its infinitely variable spindle speed control with Heidenhain Aktiv control, making operation both very simple and extremely comfortable. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on site. Delivery time: on request Machine number: 2202-xxxx Table: Rigid angle table or rotary-tilting-swiveling table Travel (X/Y/Z): 400mm / 220mm / 400mm Drive power: 3 kW Number of spindle speeds: 16 Speed range: 25-2500 rpm Tool holder: SK40 Drawbar system: S20x2 Feed: Infinitely variable Equipment and accessories: 3-axis Heidenhain digital readout, stepless feed adjustment on all 3 axes, Heidenhain digital readout with Aktiv control, coolant system, central lubrication, technical documentation, machine leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance Bwsdpfx Aox Hr Dzjl Ijl - On request, we can fully or partially overhaul the selected machine for you - If desired, you can order further accessories such as tools, etc. directly - If desired, we can install additional equipment such as safety devices, etc. directly - We are also happy to handle shipping and/or installation for you

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 25 rpm, year of last overhaul: 2026, Equipment: documentation/manual, Dear Sir or Madam, We are offering a partially overhauled Deckel FP2 for sale. This newer model stands out particularly due to its stepless speed control, which makes operation very easy and extremely comfortable. The machine has undergone an extensive partial overhaul in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. --- Currently 3 units available for immediate delivery! --- Availability: 3x immediately Machine no.: 2202-xxxx Table: fixed angular table or rotary-tilt-swivel table Travel distances: X 400mm / Y 220mm / Z 400mm Drive power: 3kW Number of spindle speeds: 16 Speed range: 25-2500 rpm Tool holder: SK40 Bwsdpfxoy Exays Al Iel Drawbar thread: S20x2 Feed: stepless Equipment and accessories: Heidenhain 3-axis digital readout, stepless feed regulation on all 3 axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can fully or partially overhaul your selected machine - If desired, you can order additional accessories such as tools, etc. directly - If required, we can directly install further equipment such as safety devices - We are happy to arrange shipping and/or installation for you