Used Deckel Lkd for sale (703)

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, spindle motor power: 25,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMC 60U RS5 was manufactured in 2004. Ideal for precision vertical machining, this used machine represents a valuable addition to any workshop. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60U RS5 vertical machining centre. Contact us for more information. Additional equipment • Tool Changer & Magazine: Horizontal Double Gripper / Magazine Type: Chain Magazine / Capacity: 60 Tool Places / Tool Clamping: According to DIN 69872 / Tool Breakage Control: Mechanical Version • Coolant Tank: 900 L • IKZ: Form AD with Paper Band Filter • Measuring Probe: Heidenhain TS 641 (Infrared) • Tool Measurement: Blum Laser for Tool Length & Diameter Measurement Horizontal/Vertical • Rotating Viewing Window Machine Benefits Ppjdpfjyaam Aox Afhol Technical Machine Benefits • Production hours: 54347 operating hours, 3500 spindle hours • Universal milling head with controlled b-axis • Very well maintained machine operated for high-end applications • Spindle replacement in 2021 at a cost of approximately 40000 euros • Checkbook maintained Extra Information Disc changer and 4 pallets are included Control 3D Haidenhein contouring control "Millplus IT with Millplus IT handwheel" Serviced regularly... excellent condition... new spindle has 3,500 hours

Condition: ready for operation (used), Year of construction: 1996, operating hours: 12,800 h, number of axes: 5, This 5-axis DECKEL MAHO DMU 50V was manufactured in 1996. It features a Millplus control system with software version DV400, an external hydraulic unit for clamping devices, and a Hainbuch hydraulic vise for BZI32 collet. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 50V machine we have for sale. Contact us for more information about this machine. Additional equipment • Hainbuch Hydraulic Vise for BZI32 Collet Machine Benefits Technical Machine Benefits • Machine is operated with a motor encoder due to c-axis encoder currently defective. • Internal cooling: 40 bar • External hydraulic unit for clamping devices • Counterholder on the rotary table • Rotary union on the table • Tool positions: 24 tool positions – 2 partially available (space is broken) • Measuring probe: renishaw – prepared Ppedpsx U Tinofx Afhel Extra Information Machine still under power

Condition: used, Year of construction: 2007, Technical details: x-travel: 1.250 mm Ppsdpfx Afsya Amxshsl y-travel: 710 mm z-travel: 710 mm table surface area: 1500 x 800 mm table load capacity: 800 kg turning speeds: 12000 1/min spindle drive: 15 / 10 kW control: MILLPLUS iT HEIDENHAIN spindle taper: SK 40 tool change unit: 60 Pos. capacity: 44 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 3,5 x 2,65 x 2,65 m 5 axis simultaneously machining center, B-axis (-120° / +30°), NC-rotary-table integrated in rigid table, direct measuring system, 3D probe infrared, HEIDENHAIN TS 640, internal coolant supply 40 bar, 600l, flushgun, chipconveyor, mode 4, 3D quickset software (no hardware), approx. 48.500 hours "machine on" / approx. 18.000 hours "spindle on" *

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn Machining Center Ppsdpeu Rnluofx Afhsl Condition: Used Year of manufacture: 2001 Operating hours: 56,376 Spindle hours: 26,451 Technical specifications: Travel X/Y/Z: 600 / 700 / 600 mm Motor power: 15 kW (40% duty cycle); 10 kW (100% duty cycle) Spindle speed: 18,000 rpm Tool holder: SK 40 Magazine positions SK 40: 60 Equipment: - 3D path control MillPlus IT - Horizontal double-arm tool changer - Automatic swivel milling head - Rotating safety glass - NC rotary table with pallet carrier - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B axis SK 40 (only in combination with SK 40 motor spindle) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Operating mode 4 extended manual intervention - Rinse gun with pump - Tool breakage control SK 40 mechanical version, range: 63...310 mm / +/- 3 mm - Intermittent chip conveyor operation - Internal coolant supply switchable from 40 bar to 80 bar

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 2803-2693, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 32 rpm, quill stroke: 80 mm, quill travel distance: 80 mm, type of input current: three-phase, Equipment: documentation/manual, For sale is a precise and robust Friedrich Deckel FP3NC tool milling machine, year of manufacture 1985, equipped with a Dialog 4 CNC control system. The machine is German-made, renowned for its quality, and is suitable for tool and mould making as well as precise single-part and small-batch production. Technical Data (extract) Model: FP3NC Control: Deckel Dialog 4 Year: 1985 Serial Number: 12767 Main spindle power: 2.0 / 3.0 kW, pole-changeable three-phase brake motor Spindle speeds: 31.5 – 6300 rpm (2 ranges, manually switchable) Tool holder: SK 40 Quill Stroke (manual): 80 / 80 mm (horizontal/vertical) Travel paths: X-axis: 400 mm Y-axis: 400 mm Z-axis: 400 mm Feed rate: 2 – 3600 mm/min Rapid traverse: 4000 mm/min Clamping slots in table: 4 slots, 14H7, 63 mm spacing Total weight: approx. 1800 kg Electrical connection: 380 V, 50/60 Hz, connected load 14.5 kVA Rated current: 22 A Control voltage: 24 V Equipment & Control - 4-axis contouring operation with dialog-guided input - 3D linear and circular interpolation, helical interpolation, polar coordinates - Extensive drilling and milling cycles, graphical cycle entry support - “Contour pocket” milling cycle for pocket machining (including irregular shapes and islands) - Subroutine functions, program memory up to 512 kByte - Tool offsets for up to 100 tools - Interfaces for cassette recorder, punch tape reader, floppy disk or Winchester drive (DNC-capable) Condition & Features - Machine is fully functional - High-precision, stable design – ideal for workshops, training or production - Operating manual and technical documentation available Ppsdpsxlghpjfx Afhol - Inspection by appointment possible

Condition: used, Year of construction: 1996, operating hours: 8,900 h, functionality: fully functional, DMG vertical machining center Model DMU 50 V Pjdpfoyahh Ijx Afhepl Year : 1996 5 axis Length movement : 500 mm. Cross movement : 380 mm. Vertical movement : 380 mm. Spindle : BT 40 Spindle speed : 8000 RPM. Tools in magazine : 24 pieces Control : Deckel Maho MillPlus Spindle hours : 8900 Interface RS-232 C Short arbors

Condition: ready for operation (used), Year of construction: 2001, operating hours: 32,966 h, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,534 mm, overall weight: 3,000 kg, product length (max.): 1,783 mm, number of axes: 5, This 5-axis DECKEL MAHO DMU 50 T was manufactured in 2001. It features a manual rotary table with a clamping surface of 700 x 500 mm and a maximum load of 200 kg. The spindle speed reaches up to 9,000 rpm, and the machine includes a tool changer with 16 magazine slots. Dimensions are 1,783 x 1,647 x 2,534 mm, weighing 3,000 kg. Consider the opportunity to buy this DECKEL MAHO DMU 50 T vertical machining centre. Contact us for more information. • Rotation: 360° • Swivel: -10°/+95° • Spindle Speed: 9000 rpm Pedpjx Uqmdjfx Afhspl • Power (100%/40%): 9/13 kW • Tool Holder: SK 40 DIN 69871 • Feed Rate X, Y, Z: 10000 mm/min • Rapid Traverse X/Y/Z: 12 m/min • Manual rotary table with swiveling axis • Clamping Surface: 700 x 500 mm • Maximum Load: 200 kg • Slot Spacing/Width: 63 mm / 14 H7 • Magazine Slots: 16 • Maximum Tool Length: 290 mm • Maximum Tool Weight: 6 kg • With electric hand wheel Dimensions Machine Depth 1647 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,265 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 810D Powerline, total height: 2,650 mm, table load: 600 kg, overall weight: 5,500 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V eco was manufactured in 2011. It features a Siemens Sinumerik 810D Powerline control system, a tool holder SK 40, and a tool magazine with 20 positions. The machine offers a spindle speed of up to 10,000 rpm and a rapid traverse speed of 25 to 30 m/min in X/Y/Z axes. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V eco vertical machining centre. Contact us for more information about this machine. • Tool magazine: 20 positions • Table size: approx. 790 × 560 mm • Coolant: external only; no internal coolant • Notes/condition: Screen may be defective • Error message during tool change (see images) & contours/drilling patterns can no longer be programmed Additional equipment Ppodpfx Aex D D Htsfhsl • 3D probe • Chip conveyor: not included • Internal coolant: not available (external coolant supply only) Dimensions Machine Depth 2050 mm

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,729 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, total height: 2,650 mm, table load: 600 kg, overall weight: 5,500 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It's a vertical machining centre equipped with a measuring probe and a 3D button, ideal for precise machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information about this machine. • Tool magazine: 20 stations • Table size: approx. 790 × 560 mm Additional equipment Podpex D Epcefx Afhopl • 3D probe • Coolant: external coolant supply only (no through-spindle/internal coolant) • Chip conveyor: not included Dimensions Machine Depth 2050 mm

Condition: ready for operation (used), Year of construction: 2003, operating hours: 93,500 h, travel distance X-axis: 1,180 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, number of axes: 5, This 5-axis DECKEL MAHO DMC 100 T was manufactured in 2003. It features X, Y, Z travels of 1,180 mm, 710 mm, and 710 mm respectively, a SK40 tool magazine with 32 positions, internal coolant supply, and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMC 100 T vertical machining centre. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Internal coolant supply • Chip conveyor Extra Information Machine still under power Technical Specification Pjdpfxsx T Dgne Afhjpl Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 3,600 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 9,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 50 vertical machining centre was manufactured in 2005. It features a Heidenhain iTNC 530 control, a main spindle speed range of 20 - 10,000 RPM, and a rotary table with a clamping surface of 630 x 500 mm. The machine has undergone significant overhauls, including a complete X-Axis bearing replacement and new coolant pump installation. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 machine we have for sale. Contact us for more information. Additional equipment • Tool Positions: 16 / Max. Tool Weight: 6 kg / Max. Tool Length: 300 mm • Max. Tool Diameter: Without adjacent tools: 130 mm / With adjacent tools: 80 mm Ppjdpfsx E D U Ajx Afhsl • Total Power Requirement: 17 kVA • No chip conveyor included / No automatic measuring probe included / No tools included Machine Benefits Qualitative Machine Benefits • Low spindle hours and power-on hours. • Never used in series production; operated with care and proper procedures. • Warm-up programs and maintenance routines followed for optimal performance. Technical Machine Benefits • Torque: 57 / 82 nm / rapid traverse (x/y/z): 12 m/min /feed rate: 10000 mm/min • Table clamping surface: 630 x 500 mm • Swivel range: -5 / +110° • Max. Table load: 200 kg • T-slots: 14 h7 / t-slot spacing: 63 mm • C-axis rotation: +/- 360° • Complete x-axis bearing overhaul including ball screw and bearing assembly. / various hydraulic components overhauled. / tool changer readjusted and sensor system replaced. • New door switch installed. / new discs installed (with some chip debris affecting them). / new coolant pump installed. / new screen installed. / new handwheel hr410 installed. • Machine is 5-axis machine with 3+2 configuration Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 1990, operating hours: 30,912 h, This 5-axis DMG DECKEL MAHO MH 800 E2 was manufactured in 1990. It features a semi-cabin splash guard, an adaptable control unit with power unit, an electrical cabinet, a MAHO vertical tool changer, an NC rotary table, and an electric manual control panel. Consider the opportunity to buy this DMG DECKEL MAHO MH 800 E2 universal machining centre. Contact us for more information about this machine. • Splash guard cabin (semi-cabin) • Control with adaptation and power unit, including electrical cabinet • Interface for connecting peripheral devices • MAHO vertical tool changer • NC rotary table • Electric manual control panel • Precision/positioning: • Position tolerance T_P: 0.020 mm • Position uncertainty P_a: 0.015 mm Psdpfsx D Hqzjx Afhspl • Reversal span U: 0.005 mm • Position scatter: 0.005 mmAdditional equipment • Damping plates

Condition: used, Year of construction: 2013, x-travel 835 mm y-travel 510 mm z-travel 510 mm control iTNC 530 ERGOLine Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 83 / 57 Nm Pedpfx Afjx R Enushjpl table surface area 1.000 x 560 mm max. table load 800 kg number of T-slots 5 T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min feed power 5.000 N total power requirement 28 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,8 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design - 40.108h operating hours, 12.656h spindle hours - incl. Lehmannn 4th Axis - incl. Lehmann tailstock - incl. 20x SK 40 tools

Condition: used, Year of construction: 2007, x-travel 1.035 mm y-travel 560 mm z-travel 510 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 DIN 69871 table surface area 1.200 x 560 mm max. table load 1.000 kg table height over floor 720 mm Pedpfjx R Em Rjx Afhjpl number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm change time 1,6 sec change-time chip to chip 7,0 sec feed speeds 20.000 mm/min rapid traverse 30 m/min Feed force 5 kN total power requirement 20 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 3,0 x 3,0 x 2,8 m CNC - Machining Center Vertical DECKEL MAHO - DMC 1035 V - 28,796h operating hours, 11,512h spindle hours

Condition: used, Year of construction: 2011, x-travel 835 mm y-travel 510 mm z-travel 510 mm distance spindle nose and table 120 - 630 mm control iTNC 530 ERGOLine Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 130 / 87 Nm table surface area 1.000 x 560 mm max. table load 800 kg number of T-slots 5 T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. Pjdpfx Aox R Em Dofhspl max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min total power requirement 23 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design - 20,796h operating hours, 7,544h spindle hours

Condition: ready for operation (used), Year of construction: 2000, Immediately available from toolmaking in Switzerland: 5-axis milling machine Deckel Maho Type: DMU 35 M Pjdjyaydhopfx Afhjpl Year of manufacture: 2000 CNC control: Heidenhain TNC 310 M Electronic handwheel Table: 400 x 280 mm Table load up to 100 kg Travel X/Y/Z: 350/240/340 mm Stepless spindle speeds: 0 – 5000 rpm Taper: SK 40 Rapid traverse: 5 m/min Servomotors for X/Y/Z axes Swivel range: 360° Table clamping: +105/–150° Weight: 2 t Tool holders, hydraulic vise Price: EUR 6,500 plus VAT ex works location.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 80 m/min, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 80 m/min, total height: 2,900 mm, table width: 400 mm, table length: 400 mm, table load: 200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 28,000 rpm, operating hours of spindle: 39,945 h, coolant supply: 40 bar, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Scope of delivery: - HSC 55 machine - 3R-WorkMaster II pallet changer (automation) with all pallets - High pressure system / belt filter system (DMG) - Refrigeration unit (OLAER) - chip conveyor Excluded from delivery: - Vices - Tool holder Technical data of machine: Podpfxou Ivkgs Afhjpl - See attached OC (order confirmation) Technical data automation: - Available, on request.

Condition: used, Year of construction: 2008, x-travel 500 mm Ppjdpfxsxluf Aj Afhsl y-travel 450 mm z-travel 400 mm Control HEIDENHAIN iTNC 530 Table dimensions 500 x 380 mm table weight 500 Kg c-axis 0.001º ( ± 360º) 0 b-axis 180 ° rapid traverse X-axis 80 m/min feeds 50 m/min spindle turning speed range 18.000 U/min spindle taper BT- 40 spindle drive 30 kW Internal cooling system 40 bar handwheel HEIDENHAIN HR-410 Working hours 51.770 h Spindle hours 14.627 h total power requirement 50 kVA weight of the machine ca. 6,5 t

Condition: ready for operation (used), Year of construction: 2003, Make: DMG / DECKEL MAHO Psdpfoydfbmsx Afhjpl Type of machine: DMC 70 eVolution Year of manufacture: 2003 Control system: MillPlus Tool holder: SK40 x-travel: 700 mm y-travel: 550 mm z-travel: 500 mm Speed range: 12.000 U/min max. Table load: 800 kg Table dimensions: 900 × 550 mm

Year of construction: 1997, condition: ready for operation (used), A CNC universal milling and boring machine Decke Maho is available. Travel X/Y/Z: 500mm/400mm/400mm, power: 7kW/5kW, torque: 88Nm/63Nm, speed: 4500rpm, tool interface: SK40, feed rate: 5m/min, rapid traverse: 5m/min, rotary table diameter: 700mm, max. workpiece height: 500mm, max. table load: 200kg, machine dimensions X/Y/Z: approx. 3200mm/1650mm/2550mm, weight: approx. 2600kg, control: Heidenhain TNC 124. Documentation available. On-site inspection is possible. Psdpeyddyuefx Afhepl

Condition: used, Year of construction: 2007, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG Deckel Maho Machining Center Pedpfx Afjxtqfnehepl 5-Axis Simultaneous Type: DMU 50 EVO Linear Year: 2006 Complete Machine With Documentation CNC Heidenhain Mill Plus type Machine disconnected Ready for loading

Condition: ready for operation (used), controller manufacturer: Heidenhain Dialog 112, empty load weight: 8,900 kg, total length: 4,090 mm, total width: 3,890 mm, total height: 2,960 mm, including high pressure cooling through spindle chipconveyor Longitudinal travel X-axe: 1000 mm Cross travel Y-axe: 800 mm Ppedsx Nr E Dopfx Afhel Travel (height) Z-axe: 500 mm Dimensions Clamping space - table: 1250 x 800 mm Power on spindle: 15 kW Admission in millingheadspindle (ISO): SK 40 Max speedrange: 15 000 rpm Power needed: 50 kVa Toolchanger: yes Number of tools: 30x

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, DECKEL MAHO DMU 70 VL – Technical Specifications General Machine type: Vertical CNC machining center Year of manufacture: approx. 1999 Pedpfxeyazd Ne Afhjpl Control: Heidenhain MillPlus Axes: 3 axes (X / Y / Z), optional expansions Machine weight: approx. 13,000 kg Travel distances X-axis: 2,050 mm Y-axis: 520 mm Z-axis: 520 mm Spindle Tool holder: SK 40 Max. spindle speed: 12,000 rpm Spindle power: approx. 30 – 36 kW Spindle drive: Motor spindle Table Table size: approx. 700 × 500 mm Max. table load: approx. 350 kg T-slots: approx. 7 × 14 mm Feeds Working feed: up to 10,000 mm/min Rapid traverse X / Y / Z: approx. 30 – 40 m/min Tool magazine Magazine capacity: 32 tools Max. tool diameter: approx. 105 mm Max. tool length: approx. 315 mm Max. tool weight: approx. 6 kg Power / Installation Total connected load: approx. 30 – 40 kVA Machine dimensions (L × W × H): approx. 5,600 × 3,300 × 2,800 mm ICS (internal coolant supply) and chip conveyor

Condition: good (used), Internal Item No.: 25110 Universal Milling Machine Deckel FP3 Machine No.: 2482 Ppedpfxoyb Su Us Afhel + 3-axis digital readout + Safety guard with switch (UVV) + Machine lamp + Various SK40 tool holders and collet set (S20x2) Milling table: 800 x 420 mm Spindle taper: SK40 Max. speed: 2000 rpm Drive power: 3 kW Travel X/Y/Z: 500/300/400 mm Dimensions (LxWxH): 1400 x 1500 x 1800 mm Weight: approx. 1500 kg The machine is fully functional and can be demonstrated under power by arrangement in a heated storage area of over 500 m².

Condition: ready for operation (used), Year of construction: 1999, Machine Model: DMU 50 eVolution (5-Axis Machining Center) Ppsdpfx Asyay Rzsfhol Control: Heidenhain MillPlus (MillPlus Control) Axes: 5 (X, Y, Z, B, C) Machine Weight: approx. 5,000 – 5,100 kg Installation Dimensions (L × W × H): approx. 2,683 × 5,353 × 2,470 mm Total Power Requirement: ~ 38 – 40 kVA Working Area & Axes X-Axis Travel: 500 mm Y-Axis Travel: 420 mm Z-Axis Travel: 380 mm B-Axis (Swivel Range): ±180° C-Axis (Rotary Range): 360° Spindle Data Max. Speed: 20 – 18,000 rpm (infinitely variable) Spindle Drive: approx. 35 kW (40% duty cycle) / 25 kW (100% duty cycle) Torque: approx. 130 Nm (40% duty cycle) / 87 Nm (100% duty cycle) Tool Interface: SK 40 (standard) – HSK optionally available for certain models Table & Workpiece Table Size: ø 500 × 380 mm Max. Table Load: 200 kg T-Slots: 7 × 14 mm (H7) ⚙️ Tool Magazine Magazine Capacity: 32 tools Max. Tool Length: ~ 200 mm (depending on magazine configuration) Max. Tool Weight: ~ 6 kg Feeds / Rapid Traverse Working Feedrate: up to 20,000 mm/min Rapid Traverse X/Y/Z: up to 50 m/min