Used Deckel Maho Dmc 63V for sale (322)

Condition: used, Year of construction: 2003, x-travel 780 mm y-travel 560 mm z-travel 560 mm tool taper SK40 control HEIDENHAIN iTNC 530 weight of the machine ca. ca.12,5 t required space 3,40 x 3,30 x 2,60 m DECKEL MAHO DMC 60T BJ 2003 Operating hours: 32532.7 The machine DMC 60T (1659) is in very good condition and is ideally suited for precise milling operations thanks to powerful motor Gbedpfxjwm Rrws Aanew spindles, high feed rates, and a flexible tool magazine. All technical details can be found below. Working range Travel distance/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Worktables NC rotary table – clamping surface, pallet: diameter 500 x 630 mm Centering bore: diameter 50^H6 20 deep mm Locating bore: diameter 20^H6 20 deep mm Torque of the table at: – 100% duty cycle: 1603Nm – 25% duty cycle: 2813Nm Max. rotation of the table: 30 rpm Feed: 7200 ./min. Permissible table load: 400 kg Tool magazine with magazine SK 40 Feed drive AC servo motors in digital technology for axis X, Y, Z Feed speed X-, Y-, Z-axis infinitely programmable: 20–15000 mm/min. Rapid traverse X-, Y-, Z-axis: 50 mm/min. Setup operation X-, Y-, Z-axis: 20–2000 mm/min Measuring system Resolution | X-, Y-, Z-axis: 0.001mm Input unit | X-, Y-, Z-axis: 0.001mm Position tolerance | X-, Y-, Z-axis: 0.010mm Working area Travel/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Spindle main speed: 18000min^-1 Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Main drive 24000 min^-1: motor spindle without gearbox Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Weight Machine with tool changer and transport base: approx. 10100kg Installation weight Machine with fixed table and tool changer: max. 11500kg Dimensions Machine: 3.40 x 3.30 x 2.60 m Chip conveyor: 2.77 x 1.00 x 2.07 m Band filter system 900l: 2.22 x 1.40 x 2.20 m

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 8,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis DECKEL MAHO DMC 1035 V was manufactured in 2007. It features an X-axis travel of 1,035 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a tool changer that holds 20 positions and operates at a spindle speed of 20–8,000 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 1035 V vertical machining centre we have for sale. Contact us for further details. • Control: Heidenhain iTNC 530, 3D-Path / 3D-Contouring • Rapid traverse: 30 m/min • Main drive: AC 13/9 kW • Tool taper: ISO 40 / SK40 DIN 69871 • Tool clamping: DIN 69872 • Tool changer: 20 positions, SK40, double gripper • Table size: 1,200 × 560 mm • Measuring system: Direct measuring system X/Y/Z with air purge • Coolant / air blast: Switchable via M-function at spindle nozzles Gbodpfx Aaszv Sylsnew • Operation mode: Process monitoring with manual intervention • Software: Smart TNC incl. DZF and engraving cycle • Data communication: DMG Netservice Euro ISDN • Operating hours: 24,915.5 h (control ON) / 12,002.7 h (spindle ON) Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2006, operating hours: 77,700 h, functionality: fully functional, machine/vehicle number: 1143 000195 3, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, nominal power (apparent): 64 kVA, controller manufacturer: Siemens, controller model: SIEMENS 840 D, total height: 2,800 mm, total length: 6,000 mm, total width: 6,000 mm, table width: 630 mm, table length: 530 mm, table load: 400 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 34,700 h, spindle motor power: 64 W, number of slots in tool magazine: 120, input voltage: 400 V, pallet spaces: 5 euro pallets, Equipment: chip conveyor, documentation/manual, We offer this used universal machining center, a DECKEL MAHO DMC 60 T RS3, manufactured in 2006. Gbodpezg U N Rofx Aansw Apparent power: 64.2 kVA Maximum rated current: 93 A Rated current: 100 A Supply voltage: 400 V Frequency: 50 Hz Control voltage: 24 V If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Equipment: chip conveyor, CNC Vertical Machining Center DECKEL MAHO DMC 100 V For sale is a CNC-controlled vertical machining center, DECKEL MAHO DMC 100 V, with Heidenhain control. This machine is ideally suited for tool and die making, single-part production, and general CNC milling operations. Technical specifications: Manufacturer: DECKEL MAHO / DMG Type: DMC 100 V Control: Heidenhain Travel distances X/Y/Z: approx. 1000 / 800 / 500 mm Gedpfx Aaszh Hxmjnjbw Table size: approx. 1250 × 800 mm Max. table load: approx. 1200 kg Tool holder: SK40 / ISO40 Tool changer: 30/60 positions, depending on the model Spindle speed: up to approx. 15,000 rpm Equipment: Heidenhain CNC control Tool changer SK40 tool holder Renishaw measuring probe Coolant system Chip conveyor Condition: Used Machine is complete Inspection under power possible by arrangement.

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece height (max.): 1,100 mm, workpiece diameter (max.): 1,950 mm, workpiece weight (max.): 3,500 kg, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table width: 1,400 mm, table length: 1,600 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, spindle motor power: 28 W, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, We are pleased to offer this CNC 5-axis universal machining center. It is a Deckel Maho DMC 200U from 2004 with the Heidenhain iTNC 530 control. Gbsdpfx Aasz Tqykonjw Technical specifications: Table dimensions: 1600x1400mm Number of pallets: 2 Max. workpiece dimensions: 1950x1100 mm Max. workpiece weight: 3500 kg X-axis travel: 1800 mm Y-axis travel: 2000 mm Z-axis travel: 1100 mm B-axis (swivel of the head): -7/+187 ° C-axis (work table rotation): 360° Spindle speed: 18,000 rpm Spindle mount: HSK A-63 Spindle motor: 28/19 kW Number of positions in tool magazine: 120 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you.

Condition: used, Year of construction: 2004, x-travel 1040 mm y-travel 600 mm z-travel 500 mm feed 30 m/min control Siemens type 840 D table surface area 1250x600 mm table load 800 kg Tool changer 30 Fach spindle taper ISO SK 40 turning speeds 12000 U/min Gsdpjzdcb Refx Aanobw total power requirement 24 kvA weight of the machine ca. 8,8 t dimensions of the machine ca. . m Chip Conveyor Quick-Clamping System The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn Machining Center Condition: Used Gsdpfx Aou Rnlusanobw Current geometry protocols available Year of manufacture: 2001 Operating hours: 56,376 Spindle hours: 26,451 Technical data: Travel range X/Y/Z: 600 / 700 / 600 mm Motor power: 15 kW (40% ED); 10 kW (100% ED) Speed: 18,000 rpm Tool interface: HSK 63 Magazine capacity HSK 63: 60 Equipment: - 3D path control MillPlus IT - Horizontal tool changer with dual gripper - Automatic swivel milling head - Rotating viewing window - NC rotary table with pallet carrier - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B-axis HSK 63 (only in conjunction with HSK 63 motor spindle) - Tool interface for HSK-A63 according to DIN 69893 - Electronic handwheel - Operating mode 4: Extended manual operation - Coolant gun with pump - Tool breakage monitoring HSK 63, mechanical version, range: 63...310 mm / +/- 3 mm - Intermittent operation of chip conveyor - Internal coolant supply, switchable from 40 bar to 80 bar

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, CNC Vertical Machining Center DECKEL MAHO DMC 104 V linear With Heidenhain iTNC 530 path control Year of manufacture: 2005 Godpfoz Sahcox Aanobw Travel ranges: X 1040 mm, Y 600 mm, Z 500 mm Spindle speed range: 0 – 12,000 rpm, stepless With the following accessories: Fixed angular table, 850 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions (SK 40) NC dividing head with tailstock Electronic handwheel Full protective enclosure with sliding doors and interior lighting Operating modes 3 + 4 IKZ 40 bar Chip conveyor Rotoclear Chip flushing gun Spiral chip conveyor Coolant system 3 adjustable machine feet Operating manual

Condition: good (used), Year of construction: 1999, operating hours: 76,863 h, functionality: fully functional, controller manufacturer: Heidenhain, controller model: TNC 426, Equipment: chip conveyor, Title: 5-Axis Machining Center Deckel Maho DMC 125U L55, Year of Manufacture 1999, with Pallet Changer (5 Positions) Condition: good, technically and visually well-maintained, currently still in full productive use Year of Manufacture: 1999 Location: West Saxony Price: Negotiable Technical Data: Manufacturer: Deckel Maho GmbH, Pfronten Type: DMC 125U L55 Machine No.: 1110 000113 Control: Heidenhain TNC 426 5-Axis version with rotary table (B and C axes) Pallet changer with 5 pallet positions Integrated chip conveyor system Separate coolant/hydraulic unit Operating Hours: approx. 76,863 h Spindle Hours: 4,200 h Description: For sale is a 5-axis universal machining center Deckel Maho DMC 125U L55, year of manufacture 1999, with Heidenhain TNC 426 control. The machine features a rotary table with B and C axes for complete 5-axis machining of large workpieces, as well as a pallet changer with 5 positions for efficient, automated workpiece changes. A hall crane is also available at the location, which can be used for transporting and handling the workpieces if required. Gbjdpfx Aozxzgaoanjw Condition is good, both technically and visually, with approximately 76,863 operating hours. The machine is currently still in full productive use and can be made available on short notice. Inspection and test run at the location in West Saxony can be arranged. Special Note: If there is sufficient interest, it is also possible to take over the entire production hall, including other machining centers, as a complete package. If you are interested in a complete takeover, please feel free to contact us. Price: Negotiable

Condition: used, 5-AXIS MACHINING CENTER DMG DMU 75 monoBLOCK YEAR: 2012 MANUFACTURER: DECKEL MAHO Pfronten GmbH (Made in Germany) MODEL: DMG DMU 75 monoBLOCK (Deckel Maho) CNC: Heidenhain (with DMG ERGoline interface) FEATURES AXIS TRAVEL - X-axis: 750 mm - Y-axis: 650 mm - Z-axis: 560 mm - A-axis (Tilting): +/- 120° - C-axis (Rotation): 360° (continuous) TECHNICAL SPECIFICATIONS AND PERFORMANCE Gedpfx Aj Akcwbeanebw - Spindle/tool interface: SK40 - 60-tool magazine - Maximum spindle speed: 18,000 rpm - Numerical Control: Heidenhain (with DMG ERGoline interface) EQUIPMENT AND ACCESSORIES - Measuring probe: RENISHAW infrared probe - Included accessories ELECTRICAL DATA - Connected power: 44 kVA - Maximum rated current (In max): 63 A - Supply voltage: 400 V - Frequency: 50 Hz OPERATING HOURS (Bauser counter) - Power-on/supply hours: 31,237 h - Actual working/running hours: 14,524 h NOTE: THE MACHINE DOES NOT INCLUDE A HIGH-PRESSURE PUMP. IT CAN BE PURCHASED SEPARATELY. Machine comes with manuals and CE declaration of conformity. All technical data provided is indicative and may be subject to change without prior notice and therefore should not be considered binding.

Year of construction: 2008, condition: ready for operation (used), Travel X/Y/Z: 1050mm/800mm/560mm, C-axis: 360°, spindle head swivel range: -10°/110°, speed: 18000rpm, spindle power: 25kW/35kW, table diameter: 950mm, table load capacity: 800kg, max. workpiece height: 500mm. Tool positions: 30, tool holder: HSK A 63, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 90m/min, feed: 20m/min. Control: Heidenhain iTNC 530, operating hours: 117490h, spindle hours: 18086h. Including chip conveyor, IKZ, distance measuring system, Blum laser and measuring probe. Documentation available. On-site inspection is possible. Gbjdpev H Dgisfx Aanow

Condition: excellent (used), Year of construction: 2002, Control Siemens Sinumerik 840D Travel paths X/Y/Z: 560 x 560 x 510 mm Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Tool magazine for 40 tools, SK 40 Gsdpfoyrir Ssx Aansbw Paper filter Chip conveyor

Condition: good (used), Year of construction: 1998, Deckel Maho DMC 103V Year of manufacture: 1998 Control system: - Siemens 810D Main spindle: - max. 8,000 rpm Travel distances: - X-1000, Y-600, Z-600 mm Work table: - Clamping area 1200 x 600 mm - max. table load 800 kg Tool changer: - 24 magazine slots Gedpfx Asz Iyqaeanobw Availability: - Immediate

Condition: used, Year of construction: 2003, x-travel 640 mm y-travel 600 mm z-travel 500 mm Control SIEMENS 810D powerline table dimensions 850 x 630 mm table load capacity 600 KG tool magacine with 30 Plätzen spindle turning speed range 12.000 U/min total power requirement 42 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 3,50 x 3,30 x 3,60 m Tool breakage / measurement BLUM Electronic handwheel 3 leveling elements chip conveyor Gjdpjwp S Rmefx Aanebw coolant / belt filter system Interlit SPB 3/600

Condition: used, Year of construction: 2008, x-travel 800 mm y-travel 800 mm z-travel 800 mm control Sinumerik 840D spindle turning speed - stepless 20 - 18.000 U/min power capacity at 40 % load 28,00 kW power capacity at 100 % load 19,00 kW max. torque on the spindle 121 / 82 Nm spindle taper HSK-A63 B-axis -10 - +180 ° c-axis 360 x 0,001 ° feed X/Y/Z-axis 20 - 10.000 mm/min rapid traverse X/Y/Z 60,00 m/min Gbedpfowiii Hjx Aansw feed B-axis 1 - 10.800 °/min rapid traverse B-axis 30,00 U/min size of pallet 800 x 630 mm max. workpiece diameter 800 mm workpiece height max. 1.330 mm table load 1,20 t toolpiece magazine: chain magazine 180 Stück tool diameter 80 mm tool diameter with 2 vacant positions 160 mm tool length - max. 450 mm weight of tools max. 15,00 kg total power requirement 57,00 kW weight of the machine ca. 22,00 t dimensions of the machine ca. 8,50 x 5,50 x H3,80 m 5-axis-machining center with SIEMENS Sinumerik 840D powerline control, RS4 pallet-storage, chip conveyor, coolant system with temperature control, coolant through the spindle 40-80 bar infinitely variable via M function, air through the spindle, tool cone cleaning device, exhauster, mechanical tool breakage control, Renishaw workpiece measurement(without probe), electronic handwheel. Machine without pallets!!!

Condition: used, Year of construction: 2008, x-travel 1035 mm y-travel 560 mm z-travel 510 mm Control Heidenhain type iTNC 530 table surface area 1400x650 mm workpiece weight 1000 kg Tool changer . spindle taper ISO SK40 Spindle capacity 10 KW turning speeds 8000 U/min total power requirement 20 kVA weight of the machine ca. . t dimensions of the machine ca. . m Serial number: 15425033554 Chip conveyor 2 hydraulic vises Operating hours: 53005 Spindle hours: 12233 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Godeyqvh Ropfx Aansbw About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 835mm/510mm/510mm, speed: 12000rpm, spindle power: 14kW, table dimensions X/Y: 1000mm/560mm, table load capacity: 800kg, max. workpiece height: 720mm. Tool positions: 20, tool holder: SK40, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 30m/min, feed: 20m/min. Machine dimensions X/Y/Z: approx. 3500mm/3500mm/2700mm, weight: approx. 4500kg, control: Heidenhain iTNC 530, operating hours: 112962h, spindle hours: 30702h. Including chip conveyor, IKZ, distance measuring system. Documentation available. On-site inspection is possible. Godpfsv H Dgpjx Aanobw

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 1050mm/800mm/560mm, C-axis: 360°, spindle head swivel range: -10°/110°, speed: 18000rpm, spindle power: 25kW/35kW, table diameter: 950mm, table load capacity: 800kg, max. workpiece height: 500mm. Tool positions: 30, tool holder: HSK A 63, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 90m/min, feed: 20m/min. Control: Heidenhain iTNC 530, operating hours: 113894h, spindle hours: 13349h. Including chip conveyor, IKZ, distance measuring system, Blum laser and measuring probe. Documentation available. On-site inspection is possible. Godpfsv H Dgcjx Aanobw

Condition: used, Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Siemens, controller model: 840D powerline, spindle speed (max.): 8,000 rpm, spindle nose: HSK-A 100, number of slots in tool magazine: 354, Horizontal Machining Center Manufacturer: DECKEL MAHO Model: DMC 100 H duoBLOCK Year of manufacture: 2008 Gedpfx Aasxcp R Uonebw Control system: Siemens 840D powerline Technical data: - X-travel: 1,000 mm - Y-travel: 1,000 mm - Z-travel: 1,000 mm - Spindle speed: 8,000 rpm - Drive power - main spindle: 100/40% duty cycle 32/44 kW - Tool holder: HSK-A 100 - Number of tool positions: 354 - Rapid traverse (X / Y / Z): 60 m/min - Pallet size: 800 x 800 mm Equipment & accessories: - NC rotary table with pallet carrier - Rotary pallet changer - Internal coolant supply (IKZ) 40 bar - Rotating viewing window - Wall-mounted magazine with 300 slots - Tool loading station (rotary wall): 30 slots (inactive) / 54 slots (active) - Infrared touch probe - Tool breakage detection (SK 50 mechanical type) - Tool identification - Signal lamp, 4-color In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools shown, and workholding devices are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, X-axis: 640mm, Y-axis: 600mm, Z-axis: 500mm, feed force (40% duty cycle) X-, Y-, Z-axis: 7000N, max. feed speed X-, Y-, Z-axis: 40m/min, rapid traverse speed Y-, Z-axis: 40m/min, rapid traverse speed X-axis: 70m/min, ball screw diameter/pitch Y-, Z-axis: 40/15mm, number of magazine pockets: 30, position coding: fixed-position coding, max. tool loading weight: 90kg, max. diameter of standard tools: 100mm, max. diameter of special tools with adjacent positions free: 140mm, max. tool length: 300mm, max. tool weight: 6kg, table clamping surface: 850x600mm, T-slots: DIN 650-14, loading height (top edge of table): 850mm, max. load: 600kg, connected load: 39kVA, control: Heidenhain iTNC 530, length: 2500mm, width: 4100mm, height: 3000mm, weight: 7,74t, operating hours: 60.366h. With documentation. Gbedpozuwxqofx Aanew

Condition: used, Year of construction: 2001, x-travel 600 mm y-travel 700 mm z-travel 600 mm Control Heidenhain Millplus weight of the machine ca. 9 t Gbsdpfozdvglox Aanow

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,110 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, rotational speed (max.): 28,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 28,000 rpm, operating hours of spindle: 10,000 h, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis continuous machining center Linear motors 28,000 rpm spindle with HSK 63A, recently replaced Gbodpfxszmxmtj Aansw Rotary table, 950mm diameter Wireless workpiece probe MH Laser presetter for tool inspection Optical scales Remote handwheel Chip conveyor NO coolant supply through the spindle Complete with manuals Disconnection scheduled for August 25th Removal scheduled for August 26th

Condition: used, Year of construction: 2005, x-travel 1.000 mm y-travel 1.000 mm z-travel 1.000 mm Control 840 D Siemens turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A63 swivellable B: -30 / +180 ° swivle time 1,2 s Gbsdpfowf Rgfsx Aanow numbers of pallets 2 size of pallet 1.000 x 800 mm max. workpiece weight 1.500 kg rotatable C: 360 ° number of toolpositions 180 pos. tool taper HSK-A63 total power requirement 78 kVA weight of the machine ca. 27,0 t dimensions of the machine ca. 8,0 x 7,0 x 3,4 m 5 Axis - CNC Machining Center Universal DECKEL MAHO - DMC 100 U duoBLOCK - Swivel-Milling-Head (B-Achse) - NC-Rotary (C-Axis) - pallet changer - 180-pos. tool-changer - WITHOUT zero point clamping system - WITHOUT RINGLER exhaust - WITHOUT tools

Condition: excellent (used), Year of construction: 2002, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece height (max.): 1,230 mm, workpiece diameter (max.): 1,250 mm, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, Heidenhain iTNC 530 control Tool changer for 60 tools Automatic head +180/-7° stepless HSK A63 Number of pallets: 2 pcs Gbedpfx Aaew Ngipjnew Pallet size: 1000*800 mm

Condition: used, Year of construction: 1995, x-travel 600 mm y-travel 560 mm z-travel 560 mm Control SIEMENS 840 C total power requirement 12 kW Gbjdet Hw R Repfx Aanew weight of the machine ca. 10000 kg dimensions of the machine ca. m