Used Deckel Maho for sale (323)

Condition: repair required (used), Year of construction: 2002, operating hours: 54,981 h, functionality: not functional, machine/vehicle number: 1114 000273 3, travel distance X-axis: 1,080 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: Haidenhain, controller model: HEIDENHAIN TNC 530, total height: 2,500 mm, total length: 6,200 mm, total width: 3,802 mm, table width: 795 mm, table length: 1,500 mm, table load: 900 kg, overall weight: 9,500 kg, operating hours of spindle: 14,170 h, spindle nose: SK40, number of slots in tool magazine: 32, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, Technical Details Machine: DMG DMU 100T Year of manufacture: 2002 Control: HEIDENHAIN TNC 530 Cjdpfx Afjxxamxeljhf Spindle taper: SK40 Operating hours: 54,981 h Travel paths: X-axis: 1,080 mm Y-axis: 710 mm Z-axis: 710 mm Weight: approx. 9,500 kg Additional equipment: - NC rotary table (Nikken) - Large NC rotary table - Tailstock - Electronic handwheel Inspection Viewing under power is possible by prior appointment at any time. Condition: Used condition appropriate to age and previous usage. Known defects: - Ball screw of the X-axis worn / overhaul required - Y-axis likely cable or motor defect Repairs carried out: 2017 – Retrofit kit for handwheel 2022 – Replacement of screw conveyor in chip conveyor 2024 – New cylinder/linear guide for tool magazine 2024 – New monitor Further defects cannot be ruled out. Important note / disclaimer The machine is expressly sold as defective, without warranty, without guarantee, and with the exclusion of any liability for material defects. All technical details have been provided to the best of our knowledge, but are not binding. No responsibility is taken for completeness, accuracy, or timeliness of the information. The sale is made as seen and excluding any subsequent negotiation.

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 700 mm z-travel 600 mm NC-rotary table ø 900 x 630 mm spindle taper SK 40 spindle turning speed - stepless 20 - 12.000 U/min feeds x/y/z -stepless 20 - 10.000 mm/min rapid travel x/y/z 24 m/min control HEIDENHAIN, TNC 426 NC-rotary table - speed - max. 10,7 U/min Chodpfx Asw Eyhfofljf NC-rotary table - feed - 3600 °/min table load capacity max. 800 kg no. of tools in magazin 30 tool diameter if 2 vacant positions 160 mm tool diametre at full load 100 mm tool length - max. 315 mm weight of tools max. 10 kg total power requirement 44 kVA = 5 axis (simultan) machining center - NC rotary table = C-axis - univ. milling head = B-axis Accessories: 30 tool fixtures, electron. hand panel, chip conveyor, coolant with filtration

Condition: ready for operation (used), The machine is fully operational. All five axes operate simultaneously. For further information, please contact via WhatsApp, email, or message through Machineseeker. Codpfx Ajxzvn Defljhf

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN iTNC 530 Cjdpfx Afoxluf Aelohf Table dimensions 500 x 380 mm table weight 500 Kg c-axis 0.001º ( ± 360º) 0 b-axis 180 ° rapid traverse X-axis 80 m/min feeds 50 m/min spindle turning speed range 18.000 U/min spindle taper BT- 40 spindle drive 30 kW Internal cooling system 40 bar handwheel HEIDENHAIN HR-410 Working hours 51.770 h Spindle hours 14.627 h total power requirement 50 kVA weight of the machine ca. 6,5 t

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: Heidenhain, controller model: 426-430, 5-axis area with X-axis travel: 1800 mm, Y-axis travel: 2000 mm, Z-axis travel: 2000 mm, and C-axis: 360 x 0.001 degrees. The spindle speed is 8000 rpm with an SK 50 tool holder. Tool changer with 60 positions, table size of 1700 x 1400 mm, and a maximum table load of 5000 kg. Chjdpfx Afexzil Aelef

Condition: excellent (used), Year of construction: 2008, 5-axis simultaneous DMG DMC60U duoblock Very good condition! Operating hours: 78,000 h Chodpfswglnyjx Aflef Spindle hours since replacement: 5,900 h (2022) 2023: XZ sliding plate replaced The machine can be inspected at any time by arrangement. Control: iTNC530 Heidenhain Travel: X-600 mm, Y-700 mm, Z-600 mm B-axis: -30 / -180° C-axis: 360 ° endless Spindle mount: SK40 Spindle speed: 20 - 12,000 rpm tool magazine: 60 seats Turntable diameter: 630 mm Pallet size: 630 mm x 630 mm Internal coolant supply (IKZ): 40 bar Belt filter system: Belt filter system equipment: Measuring probe, electric handwheel, documentation, two zero-point clamping systems; Belt filter system: Belt filter system

Condition: used, Year of construction: 2008, x-travel 750 mm y-travel 600 mm z-travel 520 mm tool taper SK40 control i-TNC 530 weight of the machine ca. ca. 9 t DMGDMU 70 Built in 2008 5-axis universal milling machine DMU 70 Travel range X/Y/Z 750/600/520 mm 24 m/min rapid traverse Spindle speed 14,000 rpm Tool holder SK 40 according to DIN 69871 Codpfxoxv Eals Afljhf Tool changer 30 magazine slotsTool measurement Blum laserInfrared probe Heidenhain TS 640 Control Heidenhain iTNC 530

Condition: used, Year of construction: 1999, x-travel 600 mm y-travel 525 mm z-travel 500 mm table surface area 1000 x 543 mm spindle taper SK 40 spindle taper DIN 69871 Csdpfotqqmhex Aflehf spindle turning speed - stepless 20 - 12.000 U/min feed X/Y/Z-axis 20 - 10.000 mm/min rapid traverse X/Y/Z axis 18 / 18 / 15 m/min table load max. 350 kg control HEIDENHAIN MillPlus milling-head swivable +/- 90 ° total power requirement 26 kVA weight of the machine ca. 4,2 t dimensions of machine L x W x H 2,95 x 2,1 x 2,26 m Accessories: various tool fixtures, coolant

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Csdpfxjxvw Hqj Afljhf Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: reconditioned (used), Year of construction: 2007, CNC Vertical Machining Center DECKEL MAHO DMC 70 eVolution With Heidenhain iTNC 530 path control system Year of manufacture: 2007 Travel paths: X 750 Y 600 Z 520 Speed range: 0 – 18,000 rpm, stepless (SK 40) Including the following accessories: 2-axis NC swivel rotary table, 700 mm x 500 mm clamping surface 2-station pallet changer Vertical tool changer with 92 magazine slots (SK 40) Full enclosure with sliding doors and internal lighting Electronic handwheel 3D probe Heidenhain TS 640 Tool measurement in the work area (BLUM laser) Operating modes 3 + 4 IKZ 40 bar (internal coolant supply) Rotoclear (camera or viewing system) Cedpoxxyd Dsfx Aflehf Chip conveyor Coolant system Chip flushing gun 4 height-adjustable machine feet Operating manuals

Condition: ready for operation (used), Year of construction: 2002, General Data Machine weight 4500 kg Measurements height 2700 mm Control Unit Brand FANUC Model Series 18i-MB Dimensions Machine Length 3300 mm Table Table load 500 kg Main Drive Cjdjx Dd S Aopfx Afljhf Number of axis 3 Spindle Speed 10000 RPM Spindle motor power 9 kW Tool taper SK 40 Tools Max weight 8 kg Movement X-Axis Movement 630 mm Z-Axis Movement 500 mm Y-Axis Movement 500 mm This 3-axis DECKEL MAHO DMC 103V was manufactured in 2002. It features a FANUC Series 18i-MB CNC control, with axis travels of 630 mm in X, 500 mm in Y, and 500 mm in Z. The spindle supports SK40 tooling, operates at 10,000 rpm, and the table can handle loads up to 500 kg. Consider the opportunity to buy this DECKEL MAHO DMC 103V vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2011, Very good condition! Control: Siemens 810D Shopmill Spindle speed: max. 8,000 rpm Spindle mount: SK40 Cjdpjxdfgnjfx Aflshf tool magazine: 16 seats Travel: X-500 mm, Y-450 mm, Z-400 mm Swivel rotary table : -5 / +110

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: MILLPLUS iT HEIDENHAIN, table load: 800 kg, 5-axis simultaneous machining center! TECHNICAL DETAILS X travel: 1,250 mm Y travel: 710 mm Z travel: 710 mm Table size: 1,500 x 800 mm Table load capacity: 800 kg Spindle speed: 12,000 rpm Spindle motor: 15 / 10 kW Spindle taper: SK 40 Tool changer: 60 positions MACHINE DETAILS CNC control: MILLPLUS iT HEIDENHAIN Total power consumption: 44 kVA Dimensions & Weight Footprint: approx. 3.5 x 2.65 x 2.65 m Machine weight: approx. 10.5 t EQUIPMENT B-axis (-120 / +30) NC rotary table integrated into fixed table Direct measuring system 3D probe infrared HEIDENHAIN TS 640 Coolant system 40 bar, 600 l Rinsing gun Chip conveyor Cedpfxjxwlgze Aflohf 3D Quickset software Note: The machine is fully functional. The rotary table and X-axis produce noise.

Condition: like new (used), Year of construction: 2012, operating hours: 23,252 h, travel distance X-axis: 735 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: 3D-Control Siemens 840D, workpiece diameter (max.): 840 mm, workpiece weight (max.): 600 kg, total height: 2,897 mm, total length: 3,567 mm, total width: 2,615 mm, table width: 650 mm, table length: 650 mm, overall weight: 12,100 kg, spindle speed (min.): 18,000 rpm, tool length: 315 mm, tool weight: 8,000 g, Year of construction: 2012 CNC controller: 3D-Control Siemens 840D Axes X-axis travel mm: 735 Csdpfx Ajxrr I Isfljhf Y-axis travel mm: 650 Z-axis travel mm: 560 C-axis degrees: 360º (0,001) A-axis degrees: ±120(0.001) Feed rates m/min: 40 Rapid traverse m/min: 40 Acceleration in the axes m/s2: 6 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø650 Maximum workpiece size (D x H) mm: Ø840x500 Max. workpiece weight kg: 600 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 13/9 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 30 Tool changer: Double Gripper With free neighboring places mm: 160 Max. Tool Length mm: 315 Max tool weight kg: 8 Chip-to-chip time s: 4.9 Equipment Electronic Handwheel Chip conveyor Rigid table with integrated rotary table Infrared probe Internal cooling lubricant supply Rinsing gun Paper band filter Machine running times Under power: 23252 Spindle Working: 6497 Basic machine dimensions / weight Length mm: 3567 Width mm: 2615 Height mm: 2897 Weight kg: 12100

Condition: used, Year of construction: 2008, x-travel 450 mm y-travel 400 mm z-travel 480 mm control MillPlus IT V600 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 Nm tool taper SK 40 swivellable B: -95 / +30 ° table surface area Ø 450 mm T-slots 7x 14 x 63 mm max. table load 250 kg rotatable C: 360 ° max. workpiecediameter 380 mm max. workpiece height 670 mm number of toolpositions 16 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 8,0 kg feed speeds max. 30.000 mm/min rapid traverse 30 m/min Feed force ( X / Y / Z ) 7 / 13 / 10 kN total power requirement 27,6 kVA weight of the machine ca. 5,2 t dimensions of the machine ca. 3,1 x 3,0 x 3,0 m Chodpeu Dbpmjfx Aflof 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 40 monoBLOCK - 5-axis simultaneous - only ca. 589h Spindle-hrs.! Operating-Hours: ca. 1.700h - from training center

Condition: reconditioned (used), Year of construction: 2004, With MILL PLUS iT CNC control Year of manufacture: 2004 Travel distances: X 1000 Y 1000 Z 1000 mm Speed range: 0 – 8,000 rpm stepless (SK 50) Including the following accessories: - NC rotary table 900 mm x 700 mm clamping surface (table load max. 1.4 t) - Universal milling head with controlled B-axis - Universal tool changer with 40 magazine slots, double gripper (SK 50) - Fully enclosed safety cabin with sliding doors and interior lighting - Coolant high-pressure system – 40 bar - Chip conveyor Csdpfx Aoxn Aiboflehf - Rotoclear - 3D probing system Heidenhain TS 641 - Operating modes 3 + 4 - Electronic handwheel - Chip-blowing pistol - 50 tool holders SK 50 - 3 height-adjustable machine mounts - Transport device - Operating manuals

Condition: used, Year of construction: 2007, operating hours: 23,090 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 21 kVA, controller manufacturer: Siemens, controller model: 840D powerline, table width: 380 mm, table length: 500 mm, overall weight: 6,500 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, input voltage: 400 V, number of axes: 5, Equipment: chip conveyor, For sale is a machining center from manufacturer Deckel Maho, model DMU 50, in well-maintained and technically flawless condition. The machine has been serviced regularly and is in excellent condition both visually and mechanically. It is fully operational, tested, and ready for immediate use. Additional equipment: - Paper band filter - Coolant system With our all-inclusive package, we personally handle the complete service for you upon request – from delivery to the commissioning of your new machine. This includes unloading, placement, and alignment of the machining center. Afterwards, our experienced service technicians carry out professional commissioning, perform all necessary function tests, and ensure your machine operates reliably and precisely. Furthermore, we offer tailored training sessions for your employees so that you can maximize the potential of your machine from day one. Even after installation, we remain at your service—be it for maintenance, technical questions, or future upgrades. With our all-inclusive package you have nothing to worry about – we ensure everything runs smoothly so you can focus entirely on your production. Optionally, you can also purchase extraction systems, attachments, and accessories from us – including high-quality Donaldson extraction units – to make your production even more efficient and clean. Our service promise: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians, specializing in Mazak machines as well as other brands. We place great value on personal support and continue to assist you even after the purchase. You are also welcome to inspect and test the machine under power at our facility at any time. We cordially invite you to visit us and see the condition and functionality of the machine for yourself. With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information without guarantee. Codpfxoxwtp Re Aflehf

Condition: used, Year of construction: 2003, Machining center Deckel Maho DMU200P - very good condition - Available Immediately - Worldwide Export Control: Heidenhain iTNC530 Travel: X-2000mm, Y-1800mm, 1,100mm clamping surface: 1,700 mm x 1,400 mm Spindle speed: 12.000 U/min Spindle mount: SK50 tool magazine: 60 seats Internal coolant supply (IKZ) and chip removal package: 40 bar chip conveyor: . probe: Heidenhain TS642 electric handwheel: Heidenhain operating mode: 4 High-speed spindle attachment: 42.000 U/min Tool measurement: Blum Laser Chodoxrgitjpfx Aflsf automatic swivel milling head: B-axis NC rotary table: C-axis 3-D Quickset: , Tools: 60 x SK50

Condition: excellent (used), Year of construction: 2005, Type: DMU 80T2 Year of manufacture: 10/2005 Control: Heidenhain 3D path control iTNC-530 Clamping surface: 1250 x 700 mm (fixed table) Working area: X: 980 mm Y: 630 mm Z: 630 mm Spindle speed range: 20 – 12,000 rpm Feed rate: 0–10 m/min Tool changer: 32 magazine positions SK 40 Machine hours: Control on: 33,814 h Machine on: 29,764 h Program run: 8,237 h Codpfxjxz Rhlo Afljhf

Condition: ready for operation (used), Year of construction: 2004, operating hours: 40,000 h, Control Unit Brand HEIDENHAIN Model Mill Plus Main Drive Spindle speed range 18000 Number of axis 3 Movement X-Axis Movement 880 mm Y-Axis Movement 630 mm Z-Axis Movement 630 mm Cjdpfxjxulb Ho Aflehf Tools Type of tool holder SK40 This 3-axis DMG DECKEL MAHO DMU 80T was manufactured in 2004. It features a high-speed spindle at 18,000 RPM, internal coolant supply with 40 Bar pressure, and a 32-station tool changer. The machine includes SK 40 tool holders and a Rotoclear viewing window. Ideal for demanding machining tasks, consider the opportunity to buy this DMG DECKEL MAHO DMU 80T vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2005, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 / 82 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° max. workpiecediameter 850 mm max. workpiece height 550 mm number of toolpositions 32 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool weight 8,0 kg change-time chip to chip 10 sec feed speeds max. 30.000 mm/min rapid traverse 30 m/min Accelaration 5 m/s² total power requirement 48 kVA Chodpfsvn Ur Esx Aflef weight of the machine ca. 14,0 t dimensions of the machine ca. 6,5 x 5,0 x 2,9 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Axis) - only 6.100h Spindle Hours

Condition: reconditioned (used), Year of construction: 2006, CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock Chsdpfxoxn Aczo Afljf With MILL PLUS iT path control system Year of manufacture: 2006 Travel paths: X 800 Y 800 Z 800 mm Spindle speed range: 0 – 8,000 rpm, stepless (SK 50) Including the following accessories: - NC rotary table, 900 mm x 700 mm clamping surface (maximum table load 1.4 t) - Universal milling head with controlled B-axis - Universal tool changer with 40 magazine stations, double gripper (SK 50) - Fully enclosed guard cabin with sliding doors and interior lighting - ICS – 40 bar (internal coolant supply) - Chip conveyor - Rotoclear - 3D tactile probe Heidenhain TS 641 - Operating modes 3 + 4 - Electronic handwheel - 50 pcs. tool holders SK 50 - 3 height-adjustable machine feet - Transport device - Operating manuals

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 1153 000006 3, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller model: Siemens 840 D Solutionline (PCU 50), spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Cedpfx Aoxvz Edjflohf Travel X-axis: 1,250 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,000 mm Feed rate X, Y, Z-axis: 20 - 60,000 mm/min Rapid traverse X, Y, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 /min Max. table rotation: 30 rpm Max. workpiece diameter: 1,250 mm Max. workpiece height: 1,580 mm Max. workpiece weight: 1,500 kg Clamping area: 800 x 800 mm Pallet weight: 570 kg Spindle speed: 20 - 8,000 rpm Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions MACHINE DETAILS Control: Siemens 840 D Solutionline (PCU 50) Dimensions & Weight Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Required space: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Operating hours "Counter external 2 (read off)": 60,197 h EQUIPMENT Chip conveyor with coolant tank Coolant/lubrication system 4x machine pallets Tool magazine Oil mist extraction unit Length measuring system Y-axis (new spare part) Lubrication unit 230V 0.12 30bar (new spare part) Gear unit ZAHNRADP-AGG*MKF1-KW2-20036 (new spare part) Cyclo gearbox*F1C-A25 (new spare part) Retrofit kit for power module (new spare part) Lifting devices for the machine

Condition: excellent (used), functionality: fully functional, Equipment: chip conveyor, Universal milling machine Deckel Maho DMU 50T with TNC 426 / 430 control from Heidenhain with chip conveyor Technical data: >> Year of manufacture 2000 >> Heidenhain control TNC 426 / 430 >> Travel paths X500/Y400/Z400 >> C and B axis manual with digital display >> Work spindle: Max. torque 88 Nm Max. spindle speed 20 - 9,000 rpm Tool holder SK40 >> Feed X, Y, Z -10,000 mm/min Rapid traverse X, Y, Z 12 m/min >> Tool magazine: Number of tools 16 >> Table Ø700x500mm >> Swivel range +95° /-10° >> Dimensions and weight: Dimensions 2,200 x 4,000 x 2,450 mm Weight approx. 3,500 kg >> Coolant system >> Power connection 400V kVA 17 About the machine: Csdpfjvyr N Sex Afljhf Offered is a Deckel Maho DMU 50T universal milling machine with a Heidenhain TNC 426/430 control in very good condition. The table can be manually (digitally) adjusted using two additional axes B and C. The machine runs smoothly and precisely. The DMU 50T has a chip conveyor. Take the opportunity to view and try out the machine on site with power on.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel Maho DMU 50M with line control TNC 124 from Heidenhain TOP condition !!! Technical data: >> Year of construction 1998 >> Heidenhain control TNC 124 >> Traverse paths X500/Y400/Z400 >> C and B axis manual with display >> Speed 20- 4500 1/min >> Feed 5000mm/min >> rapid traverse 5m/min >> Tool holder SK 40 >> Table Ø700x500mm >> swivel range +95° /-10° >> electronic handwheel >> Weight 2800Kg >> Machine dimensions approx. 4.0 m x 2.5 m height 2.6 m >> Coolant device >> Power connection 400V 32A About the machine : Chodpfxjr Hbf To Aflef We are offering a Deckel Maho DMU 50M universal milling machine with a Heidenhain TNC 124 line control in very good condition. The table is manually (digitally) adjustable by two additional axes B and C. A very easy to operate control, it can enter and approach positions, deep and thread drilling, drilling patterns, hole circles, hole rows and rectangular pocket milling. Programs can be entered and read out via an interface. The Heidenhain line control makes work easier and even more precise. The milling machine was used in a large company for training purposes. Take the opportunity to inspect and try out the machine under power on site.