Used Decontamination Shower for sale (182)

Year of construction: 2026, condition: new, MDK 3000 Brush Washing Machine with Pulp Remover The unwashed fruits are fed in at the intake. After pre-washing, they are cleaned again by an additional fresh water shower on the conveyor belt. The system is easy to clean and equipped with durable, food-grade polypropylene/acetal modular belts, featuring continuously adjustable belt speed in both directions. It comes with two swivel castors, two fixed castors, or alternatively anti-vibration feet. Minimal maintenance required. Technical specifications: - Rated capacity: 3,000 kg/h - Power requirement: 5 kW, 400 V, 16 A, three-phase - Material: Stainless steel Wnr. 1.4301, AISI 304 - Dimensions: 4300x1250x2222 mm - Discharge height: 1,370 mm - Weight: 420 kg Kedefd E R Uepfx Abvedi - Washing tank water capacity: 800 L/shift - Water consumption: 100–200 L/h (depending on settings) - Water connection: ¾” quick connector - IP65 electronics - Pulp remover equipped with a robust hammer (also suitable for beetroot and quince) - Grating mill: may be electronically disengaged, enabling use of the washer for stone fruit - Fitted with 4 counter-rotating brushes for intensive washing - Rotating paddle pushes fruit towards the conveyor Options: - Various sieve inserts for the grating mill for the desired fineness of fruit and vegetables - Stop ‘n’ Go system – sensitive sensor allowing the fruit washer and all types of belt presses to operate clog-free in sync - Adaptive electric valve – fresh water spray operates only when the conveyor is running - Air injection – with nozzles and a fan at the bottom of the tank for intensive washing - Air knife – removes water from fruit surface, so less water enters the final product - Recirculation pump with filter – ensures correct flow in the washing tank

Condition: like new (used), Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Static autoclaves: these are suitable for any format and are used for food packaged in cans, jars and other flexible materials. CHARACTERISTICS: * Forced ventilation *Shower system. * Temperature and time recorder. CONSUMPTIONS: - Steam: Maximum flow rate 2100 kg/h. Approximate consumption 475 kg/cycle. - Electrical energy in KW: 22kw - Cold water in tn/hr: Flow rate 25m³/h. - Compressed air in m³/min. The theoretical required to cool the autoclave in the worst air requirement condition (empty or with low load) is 2.91 m³/minute. - Total amount of drainage in ton/day: Depends on the number of cycles. Approximately 0.8 m3/cycle will be drained from inside the autoclave at the end of the cycle. The water output of the exchanger will be the same as the water input during cooling, 25 m³/h. - Total raw water consumption in tn/day: 0.8 m³/cycle final + 12-16 m³ cooling. Kdedjx S Ipwjpfx Abvoi

Condition: excellent (used), Year of construction: 2011, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 625 mm, torque: 163 Nm, coolant supply: 20 bar, nominal power (apparent): 30 kVA, number of spindles: 48, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rotary table diameter: 400 mm, rotational speed (max.): 15,000 rpm, table load: 400 kg, tool diameter: 70 mm, tool length: 300 mm, tool weight: 10 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Technical characteristics: CNC OSP P 200 Chip conveyor Kdodpfx Aeuw Sq Ujbvji 48 tools Continuous table 360,000 pos. 15,000 rpm BT 40 Cooling through spindle 20 Bar Presetting on board table Shower work area washing system P.S. The machine has always worked in full oil Teflon material

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,600 h, functionality: fully functional, machine/vehicle number: MJ1-1139, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, controller model: Fanuc 0i-MF PLUS, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 900 mm Y-axis travel: 800 mm Z-axis travel: 710 mm Max. spindle speed: 6,000 rpm MACHINE DETAILS Control: Fanuc 0i-MF PLUS Coolant supply: 46 bar Total weight: 17,000 kg Spindle operating hours: 1,600 h EQUIPMENT Chip conveyor Table shower system (Grundfos SPK4-8) TSC cooling system with Grundfos MTR3-36/CRK2-260, 46 bar/60 Hz Kdedsxt E Ahepfx Abvji Mahle filter Renishaw NC-4 laser tool measurement system RMP-60 spindle probe

Condition: excellent (used), Year of construction: 2019, operating hours: 2,121 h, functionality: fully functional, machine/vehicle number: 0712-101296, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 32, TECHNICAL DETAILS Travel X / Y / Z: 1,050 x 560 x 460 mm Control: OSP-P300MA-e Spindle motor: 22/18.5 kW (10 min./cont.) Spindle taper: NT40 (ø70 mm) Spindle speed: 50 to 15,000 rpm Max. torque: 199 N·m Spindle cooling: oil regulation Travel speeds Rapid feed X-/Y-axis: 40 m/min Rapid feed Z-axis: 32 m/min Cutting feed: max. 32 m/min Coolant supply Tank capacity: 230 L (effective 120 L) Pump output: 0.25 kW Shower coolant supply: present Coolant through spindle: medium pressure 1.5 MPa, 20 L/min Tool changer ATC specification: MAS BT40 + JIS special pull stud Tool capacity: 32 tools Tool release package: present ATC air blower: present Tool breakage monitoring (OTS Renishaw): present Tool measuring (OMP60 Renishaw): present Chip management Chip tray: present Chip conveyor (screw type): 0.1 kW × 2 units Air blower for chips: nozzle system Chip conveyor Mayfran H-type: present Preparation for chip conveyor M-A type: present Control CNC: OSP-P300MA-e Display: 15" color display, XGA 3D-E kit with special functions: incl. spiral milling, synchronized tapping II, free bevel angle, travel limitation, 3D simulation, tool management, cycle time reduction, automatic shut-off, and much more. IGF Advance-E expansion instead of standard 3D-E kit Machine protection & safety Total enclosure: CE compliant Status indicator light: 2-color (blue: end of operation, yellow: alarm) Kodpfewnpy Nex Abvodi CE transformer & power supply adapted to local standards IEC conformity: present Other equipment Foundation washers: present Tool wear compensation: present TAS-S and TAS-C: present Operating hours: 2,121 h EQUIPMENT - ATC air blower - Tool release package - Chip tray - Shower coolant supply - Chip conveyor prepared (M-A type) - Mayfran H-type chip conveyor - Coil-type chip conveyor - Nozzle system for chip removal - Renishaw OTS tool breakage monitoring - Renishaw OMP60 probe - Smart Interface with API and virus protection - Total enclosure with CE - Status display with LED - Foundation washers - IGF Advance-E kit - 3D-E kit with cycle time reduction, monitoring, tool management - OSP-P300MA-e control with 15" color display - Operating hours indicator - Power supply CE compliant

Condition: used, The NIRO-TECH three-shaft whip washer is a reliable device made entirely of 1.4301 stainless steel, certified for direct contact with food. The machine is designed for thorough washing of pork carcasses entering the clean slaughter line zone. Three rotating shafts equipped with two-finger rubber whips effectively clean the carcasses after the bleeding, hair removal, and singeing processes, removing any remaining hair and blood. An additional water shower aids in the removal of contaminants, increasing the hygiene and efficiency of the process. Application of the whip washer: Behind the dehairing machine and singeing station – as an element closing the dirty zone of the slaughter line Behind the bleeding tub and in front of the scalding machine Technical specifications: Manufacturer: NIRO-TECH Type: Three-shaft whip washer Dimensions (cm): L: 195 x W: 175 x H: 370 Capacity: up to 120 pcs/h Water consumption: approx. 15 l/min Water temperature: 38°C Water pressure: 0.4 MPa Installed power: 6.6 kW Supply voltage: 400 V Number of shafts: 3 (individual drive for each shaft) Condition: 2 units available Advantages of the NIRO-TECH whip washer: Made of 1.4301 stainless steel – hygiene and durability Effective removal of bristles, blood, and contaminants Can be integrated into the slaughter line at various points in the process Kdodpfexazquex Abvoi High capacity – up to 120 carcasses per hour Economical water consumption while maintaining high cleaning efficiency Device adapted to the hygiene requirements of the meat industry

Condition: like new (used), Year of construction: 2015, operating hours: 10 h, functionality: fully functional, Volumetric dosing machine COMAS model DN (reconditioned with new dosing unit) Specialized machine for dosing “sponge cake” composition and creams onto cake layers: a) Sponge cake onto mould trays with diameters of 240–260 mm and thicknesses of 7–12 mm, or onto rectangular trays with custom circumscribed dimensions. b) Creams onto the layers from point a) in multiple layers (optional). Machine configuration: - Main structure made of stainless steel (S/S) with wheels and locking pivots. - Dosing head with pneumatic operation, Waicon and/or Fesner brand. - Height adjustment device for the dosing head, operated by handwheel. - Product dosing volume adjustment device, operated by handwheel with markings. Kdodpfxewxlm Te Abvji - No. 1 height-adjustable work surface. - No. 1 50-liter buffer tank for sponge cake composition storage. - No. 1 interchangeable dosing cylinder, diameter 100 mm. Adjustable dosing volume from 78 to 1240 cm³. - No. 1 terminal distributor for dosing into moulds with diameter 260 mm, equipped with perforated diaphragm for final closure. - No. 1 limiting pedal for dosing actuation or line synchronization. - No. 1 set of nozzles for sponge cake dosing. - Optional cream decoration (see pictures/next page). - No. 1 electrical installation and control panel. Main technical features - All parts in contact with the product are made of AISI 316 stainless steel or other decontaminable materials. Structure made of AISI 304 stainless steel and/or food-grade aluminium. - Transmissions and gears made of chrome-plated steel. Bearings are stainless steel-coated with hermetic sealing. - Pneumatic system: Waircom and/or Fesner brand. - Compressor: excluded. - Working cadence: a) Manual, via pedal (estimated 5–15 cycles/min). b) Automatic mode: 8–15 cycles per minute, adjustable.