Used Demag Df 115 C for sale (568)

Condition: used, Year of construction: 2006, CLAMPING UNIT Clamping force: 800 kN Lhjdpfxoz D U Skj Anxel Locking force: 800 kN Distance between tie bars: 420 x 420 mm Max. opening stroke: 450 mm Min. mould height: 250 mm (200 / 175 mm with ZE 214) Max. distance between platens: 700 mm (750 / 800 mm with WA 211) Platen size (H x V): 590 x 600 mm Max. mould weight: 700 kg Max. mould weight on moving platen: 450 kg HYDRAULIC EJECTOR Ejector stroke: 150 mm Ejector force: 41.2 kN Ejector retraction force: 14.8 kN INJECTION UNIT (120) Screw diameter: 22 mm L/D ratio: 20 Injection pressure: 2591 bar Stroke volume: 41.8 cm³ Shot weight (PS): 37 g Max. dosing stroke: 110 mm Max. nozzle stroke: 200 mm Nozzle penetration depth: 40 mm Nozzle contact force: 60 kN Barrel heating power: 5.1 kW Hopper capacity: 35 l GENERAL Oil tank capacity: 140 l Pump motor: 5.5 / 7.5 kW Total installed power: 10.6 / 12.6 kW Dry cycle time (EUROMAP 6a): 2.01 s – 196 mm / 1.82 s – 196 mm Net weight (without oil): 2550 kg (2650 kg with full cladding) Dimensions (L x W x H): 3.4 x 1.2 x 2.0 m (3.6 x 1.2 x 2.0 m with full cladding) Noise level (idle / full load): 56 / 71 dB(A)

Condition: used, Year of construction: 2003, CLAMPING UNIT Clamping force: 500 kN Locking force: 500 kN Distance between tie bars: 370 x 370 mm Max. opening stroke: 400 mm Min. mould height: 210 mm (160 / 135 mm with ZE 214) Max. distance between platens: 610 mm (660 / 710 mm with WA 211) Platen size (H x V): 540 x 530 mm Max. mould weight: 580 kg Max. mould weight on moving platen: 380 kg Lhsdpfx Aez D U Ixenxjl HYDRAULIC EJECTOR Ejector stroke: 125 mm Ejector force: 41.2 kN Ejector retraction force: 14.8 kN INJECTION UNIT (200) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 1900 bar Stroke volume: 106.0 cm³ Shot weight (PS): 94 g Max. dosing stroke: 150 mm Barrel heating power: 8.3 kW Hopper capacity: 20 l INJECTION UNIT – HORIZONTAL Max. nozzle stroke: 361 mm Nozzle penetration depth: 40 mm Nozzle contact force: 60 kN INJECTION UNIT – VERTICAL (parting line injection) A min / A max: 100 / 300 mm B min / B max: 100 / 468.5 mm Max. nozzle stroke: 368.5 mm Nozzle contact force: 15 kN GENERAL Oil tank capacity: 180 l Pump motor: 18.5 kW Total installed power: 26.8 kW Dry cycle time (EUROMAP 6a): 1.80 s – 224 mm / 1.80 s – 259 mm Net weight (without oil): 3400 kg Dimensions horizontal (L x W x H): 3.9 x 1.2 x 2.0 m Dimensions vertical (L x W x H): 3.9 x 1.2 x 3.4 m Noise level (idle / full load): 56 / 71 dB(A)

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: MIKAOG1+2, 1 Demag KBK II wall-mounted slewing jib crane, 80 kg safe working load / lifting capacity Crane available 2x! Jib length 3m, 80 kg capacity Lhedex U Nqbjpfx Anxel With Demag DC chain hoist, 80 kg capacity Weight incl. wall bracket approx. 150 kg Complete with chain hoist, festoon system, trolley, and small parts Slewing range 270° Item location is 75053 Gondelsheim Unit is completely dismantled and immediately available Shipping via freight forwarder or collection Please inquire about shipping costs based on ZIP code

Condition: used, Year of construction: 2003, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg INJECTION UNIT (120) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 2420 bar Stroke volume: 124 cm³ Shot weight (PS): 110 g Max. dosing stroke: 175 mm Max. nozzle stroke: 350 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 7.9 kW Electric screw drive (WA): 12.6 kW Hopper capacity: 70 l INJECTION UNIT (840) Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1946 bar Stroke volume: 442 cm³ Shot weight (PS): 400 g Max. dosing stroke: 225 mm Barrel heating power: 14.8 kW Lhjdpfx Asz D U D Tenxsl Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l

Condition: used, Year of construction: 2000, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg INJECTION UNIT (610) Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1598 bar Stroke volume: 399 cm³ Shot weight (PS): 360 g Max. dosing stroke: 203 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 14.8 kW INJECTION UNIT (120) Screw diameter: 30 mm Lhedpfxez D U Hbo Anxjl L/D ratio: 20 Injection pressure: 2420 bar Stroke volume: 124 cm³ Shot weight (PS): 110 g Max. dosing stroke: 175 mm Max. nozzle stroke: 350 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 7.9 kW Electric screw drive (WA): 12.6 kW Hopper capacity: 70 l

Condition: used, Year of construction: 2001, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg Lodpfx Anjz D Uyusxshl HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 80 kN Ejector retraction force: 35 kN INJECTION UNIT (840) Screw diameter: 60 mm L/D ratio: 20 Injection pressure: 1351 bar Stroke volume: 636 cm³ Shot weight (PS): 570 g Max. dosing stroke: 225 mm Barrel heating power: 23.1 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l

Year of construction: 2001, condition: used, Clamping force: 1250kN, tie-bar spacing: 475x450mm, injection unit: 440, max. flow rate: 100l/min, max. hydraulic pressure: 190bar, weight: 6.6t, an on-site inspection is possible. Lhjdpfx Aszybu Tonxel

Condition: ready for operation (used), Year of construction: 2021, operating hours: 9,500 h, clamping force: 1,000 kN, overall weight: 5,290 kg, This 5-axis SUMITOMO SHI DEMAG IntElect2 100/470-250 was manufactured in 2021. It features a clamping force of 1000 kN and a tie bar distance of 470 mm. The machine includes an injection unit size of 250 and a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 100/470-250 electrical injection moulding machine we have for sale. Contact us for further details. Lhedpjzp Ew Dofx Anxel - Tie Bar Distance: 470 mm- Mould Height Min.: 180 mm- Mould Height Max.: 550 mm- Centering Diameter (Fixed Platen): 125 mm- Centering Diameter (Moving Platen): 125 mm- Ejector Stroke: 150 mm- Ejector Force: 32 kN- Ejector Speed: 333 mm/s- Injection Unit Size: 250- Screw Diameter: 30 mm- L/D Ratio: 20- Injection Speed: 350 mm/s- Control Unit: SDIAS- Mains Connection / Voltage: 400 V / 50 Hz- Current / Amperage: 70 A- Short Circuit Capacity (Icw): 2.0 kA- Max. Hydraulic Pressure (Pmax): 210 bar- Total Weight: 5290 kg- Robot System Model: SDR 5S H&P- Robot Load Capacity: 3 kg- Robot X-Stroke (Transverse Stroke): 1000 mm (Non-operator side)- Robot Y-Stroke (Demoulding Stroke): 400 mm- Robot Z-Stroke (Vertical Stroke): 1000 mm- Additional / Peripheral Equipment:- Material Hopper Loader / Conveyor: KOCH TECHNIK- Temperature Control Unit: HB-THERM Thermo-5

Condition: refurbished (used), operating hours: 35,498 h, functionality: fully functional, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Ljdpoz Dhnrofx Anxshl Control system: NCIII Screw diameter: 70 mm Injection volume: 960 cm³ / 860 g (70 mm) Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2 circuits Pneumatic valve: 1x Robot interface Equipment: Core pull, 2-circuit / Robot interface, 2-circuit Pneumatic valve 5/2 No.1 on moving platen Pneumatic valve 5/2 No.2 on moving platen Clamping force controlled Handling interface, Euromap 12 (32-pin) robot interface Mould protection interface (ejector plate safety) Integrated hot runner control, 12 zones Mould protection Plug combination for electrical connection

Condition: excellent (used), Year of construction: 2008, Min. tool mounting height: 200 mm Max. tool mounting height: 350 mm Max. opening stroke: 380 mm Screw diameter: 22 mm Clamping force: 800 kN Tie bar spacing: 470 x 420 mm Delivery does not include attachments/accessories. The machine is in very good condition and is powered on. Lhsdpezkfd Tjfx Anxsl

Condition: used, functionality: fully functional, Year of construction: 1976, machine/vehicle number: ROD109, 1 Demag KBK I wall-mounted slewing crane, 500 kg load capacity / lifting capacity Jib length 2 m, 500 kg load capacity with Demag DC chain hoist, load capacity 500 kg (year of manufacture 2007) Lsdoxmuuyspfx Anxjhl Weight incl. wall bracket approx. 150 kg Complete with chain hoist, cable trolley, travel carriage, and small parts Slewing range 270° Item location: 75053 Gondelsheim The system is fully dismantled and immediately available Shipping by freight carrier or collection Please enquire about shipping costs according to postal code

Condition: used, Year of construction: 2006, Demag Modular 250/560-1450 Euromap size: 2500-1450 CLAMPING UNIT Clamping force: 2500 kN Locking force: 2750 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN INJECTION UNIT (1450) Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1400 bar Stroke volume: 1039 cm³ Shot weight (PS): 940 g Max. dosing stroke: 270 mm Ledpfx Aoz D Tnqenxehl Max. nozzle stroke: 400 mm Nozzle penetration depth: 20 mm Nozzle contact force: 110 kN Barrel heating power: 27.0 kW Electric screw drive (WA): 30 kW Hopper capacity: 110 l GENERAL Oil tank capacity: 500 l Pump motor: 30 / 37 kW Total installed power: 57 kW (64 kW with electric screw drive) Dry cycle time (EUROMAP 6): 2.35 s – 392 mm / 2.25 s – 392 mm Net weight (without oil): 11200 kg Dimensions (L x W x H): 5.7 x 1.7 x 2.2 m (length without injection unit overhang) Noise level: 74 dB(A)

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Manufacturer: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot specifications: Year of manufacture: 2005 X-axis: 550 mm Lodpfxjxhfuas Anxehl Y-axis: 1000 mm Z-axis: 2000 mm The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes. In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies). The machine was in running production and operating without problems until dismantling.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,548 h, clamping force: 1,600 kN, screw diameter: 45 mm, injection weight: 294 g, overall weight: 6,983 kg, Hydraulic injection moulding machine manufactured in 2017. This SUMITOMO SHI DEMAG Systec 160/520-600 features a clamping force of 1600 kN and a tie bar distance of 520 mm. The machine includes an injection unit with a screw diameter of 40 mm, 45 mm, and 50 mm, and a maximum shot weight of 313 g. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 160/520-600 machine we have for sale. Contact us for further details. • Tie bar distance: 520 mm • Injection unit: 600 • Control: S-Dias • Screw diameter: 45 mm • Injection pressure: 1914 bar • Shot volume: 294 cm³ • Shot weight (PS): 254 g • Injection stroke: 469 mm • Installed heating capacity: 11.3 kW • Oil tank capacity: 290 l • Pump drive: 25 / 45 kW • Noise level: 69 dB(A) • Dimensions: 5.6 x 2.1 m • Main electrical connection: 3/400 V, 50 Hz, 167 A • Max pressure: 190 bar • Platen size: 770 x 770 mm • Max mold weight: 1300 kg • Max opening stroke: 500 mm Ledpjzbh Epjfx Anxshl • Min/Max mold height: 275 / 685 mm • Distance between platens: 1085 / 1185 mm

Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Injection volume: 891 cm3 Shot weight: 810 g Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Platten dimensions H x V: 1450 x 1470 mm Max. oppening stroke: 930 mm Ledpsyzylvofx Anxshl Min Mould installation height: 450 mm Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) Hot Runners 1. 24-zone integrated hot runner controller (ZE 273) 2. 32-zone integrated hot runner controller on fixed platen (ZE 274), extended to 36 zones (SO 10) 3. Pneumatic needle valve nozzle control, 1× 5/2-way valve (ZE 276) 4. Hot runner connector upgrade for 24 zones (SO 01) 5. Total: 60 zones across two controllers Equipment Highlights Injection 1. Electric screw drive, frequency-controlled (WA 313) 2. High-speed injection with central accumulator, servo-valve controlled (WA 361 + SO 12) 3. 4-fold pneumatic cascade injection + Gammaflux cascade interface (SO 05 + SO 08) Quality & Process Monitoring 1. Priamus cavity pressure measurement + BlueLine integration (SO 02 + SO 04) 2. Holding pressure switchover with peak value capture and recording (ZE 350) 3. 100% process data recording (PDE) with statistics and graphics (ZE 420) Mold & Core Pulls 1. 4 core pull circuits via proportional valves, flow-independent (ZE 234 + ZE 237) 2. Electric pressure relief for core pulls (SO 27) 3. Separate pneumatic hot runner needle (SO 04x) Quick Mold Clamping 1. Full quick-clamp system — interface, power supply, installation & testing (SO 23a–d) Connectivity & Automation 1. OPC/UA interface for host systems (SO 5631) 2. WC5 World Connect — remote access and service (ZE 571) 3. Integrated BDE/PDE production data management (ZE 471 + ZE 420) 4. Demag robot interface via CAN bus (ZE 752) Energy & Infrastructure 1. Integrated energy monitoring with per-part cost calculation (ZE 4921) 2. Elastic machine mounting / vibration isolation (WA 180) \+ 2x Magnetic platten

Condition: good (used), Year of construction: 2001, Demag Ergotech 250/560-840 Euromap size: 2500-840 CLAMPING UNIT Clamping force: 2500 kN Locking force: 2750 kN Lhodpfx Aez D Ttgenxjl Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN INJECTION UNIT (840) Screw diameter: 45 mm L/D ratio: 20 Injection pressure: 2402 bar Stroke volume: 358 cm³ Shot weight (PS): 320 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 20 mm Nozzle contact force: 80 kN Barrel heating power: 13.0 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 30 / 37 kW Total installed power: 43 kW (50 kW with electric screw drive) Dry cycle time (EUROMAP 6): System: 2.35 s – 392 mm / 2.25 s – 392 mm; Concept: 2.25 s – 392 mm / 2.25 s – 392 mm Net weight (without oil): 10700 kg Dimensions (L x W x H): 5.7 x 1.7 x 2.1 m (length without injection unit overhang) Noise level: 74 dB(A)

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 7363-0044, Plastic injection moulding machine | Sumitomo SHI DEMAG - Systec 100/420-310 (1000-310) Clamping force [kN]: 1,000 Number of injection units: 1 Clamping platen width [mm]: 600 Clamping platen height [mm]: 600 Tie bar spacing horizontal [mm]: 420 Tie bar spacing vertical [mm]: 420 Locating ring diameter [mm]: 125 Minimum mould height [mm]: 250 Maximum mould height [mm]: 500 Maximum daylight [mm]: 500 Maximum ejector stroke [mm]: 150 Thread [M]: 16 Lhjdpfeygiafox Anxol Maximum mould weight [kg]: 780 Maximum mould weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 35 Maximum shot weight [g] PS: EE1: 149 Aggregate configuration: EE1: horizontal Equipment: 1 core pull, stacking station, with robot Inspection possible at any time by arrangement. Free loaded onto truck (Butzbach). #Tags: Sumitomodemag | Systec400 | 100-420-310

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8040-0008, Plastic Injection Moulding Machine | Demag Ergotech - Systec 280/630-840 (2800-840) Clamping Force [kN]: 2,800 Number of components: 1 Clamping platen width [mm]: 950 Clamping platen height [mm]: 950 Clear tie bar distance horizontal [mm]: 630 Clear tie bar distance vertical [mm]: 630 Centering ring diameter [mm]: 160 Lodpfoygidwsx Anxjhl Minimum mould height [mm]: 330 Maximum mould height [mm]: 710 Maximum daylight opening [mm]: 675 Maximum ejector stroke [mm]: 200 Thread [M]: 20 Maximum mould weight [kg]: 3,700 Maximum mould weight, moving platen [kg]: 2,500 Screw diameter [mm]: EE1: 45 Max. shot weight [g] PS: EE1: 320 Injection unit arrangement: EE1: horizontal Equipment: 2-core pull, 6-fold cascade, with robot Inspection possible at any time by prior arrangement. Free loaded on truck (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DEMAGErgotech | Ergotec | Ergotech280

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Year of manufacture: 2007 Injection Unit: Lhsdpfxjx Uqb Ij Anxol Screw diameter: 25 mm Injection pressure: 2752 bar Shot volume: 61.3 cm³ Shot weight (PS): 54 g Max. dosing stroke: 125 mm Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Min. mould installation height: 250 mm Max. distance between platen: 750 mm Platen size: 600 x 600 mm Clear tie bar spacing: 420 x 420 mm Max. mould weight: 700 kg Equipment: Core pull: 2x Mould heating: 6x Air valve: 1x Robot interface Machine is supplied with robot

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic Lhjdozy H S Ropfx Anxjl clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), functionality: fully functional, power: 150.78 kW (205.00 HP), fuel type: diesel, fuel tank capacity: 300 l, overall weight: 53,523 kg, maximum load weight: 112,000 kg, Year of construction: 2006, machine/vehicle number: 506081, Equipment: cabin, crane, hydraulics, USED DEMAG CRANE FOR SALE DEMAG CRAWLER CRANE MODEL: A600 C YEAR OF MANUFACTURE: 2006 Good Working Condition Machine sold as its Condition For More details please Contact Vijay JPN Industrial Trading Pte Ltd, Ledoumqy Espfx Anxshl 13A, Pandan Crescent, Singapore-128478

Condition: used, Year of construction: 2001, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 80 kN Ejector retraction force: 35 kN NJECTION UNIT (120) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 2420 bar Stroke volume: 124 cm³ Shot weight (PS): 110 g Max. dosing stroke: 175 mm Max. nozzle stroke: 350 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 7.9 kW Electric screw drive (WA): 12.6 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 22 / 30 kW Total installed power: 30 kW (38 kW with electric screw drive) Dry cycles (EUROMAP 6a): 1830 / 1900 per hour Dry cycles without nozzle retraction: 2200 / 2300 per hour Net weight (without oil): 6200 kg Dimensions (L x W x H): 5.1 x 1.6 x 2.1 m (length without injection unit overhang) Noise level (idle / full load): 66 / 77 dB(A) Demag Ergotech 150-840 NC4 INJECTION UNIT (840) Screw diameter: 60 mm L/D ratio: 20 Injection pressure: 1351 bar Stroke volume: 636 cm³ Shot weight (PS): 570 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 23.1 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 22 / 30 kW Lhsdpfjz D Uv Njx Anxel Total installed power: 45 kW (53 kW with electric screw drive) Dry cycles (EUROMAP 6a): 1700 / 1870 per hour Dry cycles without nozzle retraction: 2000 / 2200 per hour Net weight (without oil): 7700 kg Dimensions (L x W x H): 5.4 x 1.6 x 2.1 m (length without injection unit overhang) Noise level (idle / full load): 66 / 77 dB(A)

Condition: excellent (used), DEMAG / ABB / TELEMECANIQUE – Frequency Converters / Inverters – 11 units: 1. DEMAG Type - ACS800 04M-0140-3+D150+E210+H355+H356+H360 with resistance unit (new) – 1 unit. 2. DEMAG Type - ACS800 04M-0210-3+D150+E210+H355+H362+N672 with resistance unit (used) – 1 unit. 3. DEMAG Type - UD DPU415V024E10 – 1 unit. 4. TELEMECANIQUE Type - ATV 58ED23N4 – 15 kW (in original packaging). 5. DEMAG Type: ABB – ACS 800 – 2 units. 6. DEMAG Type: ABB – ACS 800 – 1 unit. Lhjdpoyu S Alsfx Anxsl 7. VACON / AC DRIVE – 3 units. 1. VACON Type: X4K40400C 2. VACON Type: XX4K440075C 3. AC DRIVE Type: X4K40075C1 8. AC DRIVE Type: X4 – 1 unit.

Year of construction: 2003, condition: ready for operation (used), Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) Engel ES 500/100 HLS, year of manufacture: 1998, operating hours: approx. 103000h. On-site inspection possible. Sale of individual machines possible. Lhodpoxrf Nrefx Anxsl

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 Hours: 42493 extra equipment: Lhedpfjyg Eu Ssx Anxjl 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment