INJECTION MOULDING MACHINE
OIMA STRATOS SP (with servo motor)
550 Ton Year 2005
Model: 6500/550 SP
Screw Size: 95 mm
0d0tz3u
Shot Weight : 3000 gr
DBTB: 900 x 800 mm
Min Mould Height : 300 mm
Max Mould Height : 850 mm
Mould Opening Stroke : 900 mm
Platen Size : 1220 x 1200 mm
Air Wales : 1
Accumulated : 6
TOTAL PRICE: 23,299 Euros (Ex Works) (Loaded to transport)
DEMAG ERGOTECH Extra 80-430
warehouse no.: 502992
manufacturer: DEMAG
type: Ergotech Extra 80-430
controller: NC4
year of construction: 2005
technical data clamping unit
clamping force: 800 kN
distance between tie bars h:: 400 mm
distance between tie bars v:: 400 mm
size of mould plates h: 540 mm
size of mould plates v: 540 mm
min. mould height: 250 mm
Bvzjmjmwoo
max. open daylight: 700 mm
opening stroke: 450 mm
ejector stroke: 150 mm
ejector force: 41 kN
centering diameter of moving platen:...
screw size:30 mm
injection shot weight in Polysterol:65 g/PS
closing pressure:400 kN
daylight:270 x 270 mm
opening stroke:350 mm
mould height - Max./min.:200 mm
control:Selogica (1. Version)
daylight between platens - max.:550 mm
total power requirement:21 kW
dimensions of the machine ca.:4,30x1,60x2,08 m
few operation hours - condition like new -
- wear reisistant plastification unit
- fully hydraulic clamping unit
- with Vario system
- mould blow unit
- sorter unit
- interface for host co...
General Data
Measurements width 3200 mm
Measurements depth 1300 mm
Measurements height 1800 mm
Brwduixcbe
Machine weight 2300 kg
Injection Unit
Screw diameter 20 mm
Shot weight 25,9 g/ps
Stroke volume 28,3
Clamping Unit
Clamping force 400 kN
Additional Equipment
Geiger Handling, MiniServo 1.5 (additional cost)
Temperature devices (additional cost)
Parts conveyor (additional cost)
This Krauss Maffei 40-55 C2 Injection Moulding Machine was built in 2003 in Germany. It has 70039 production hou...
2x fired ARBURG 320S with magnetic clamping plates
Selection unit
Il7iinnbc
Handling interface
Machines are immediately available!
Injection moulding machine used
manufacturer: Arburg
type: 320C 600-100 U-version /swivel horizontal / vertical
control: Selogica
year of construction: 2001
Operating hours: approx. 58.000 h
Special features/extras (according to the manual)
-U-version horiz./vert. swivelling
-core pull 1 x
-robot interface
-screw cylinder highly wear resistant
closing side:
Closing force 600 kN /60 tons
tie bar distance H X V 320 x 320 mm
platen size hxv: 446 x 446 mm
Installation height min: 200 mm
platen dista...
INJECTION MOULDING MACHINE
OIMA STRATOS SP (with servo motor)
550 Ton Year 2004
Model: 6500/550 SP
Screw Size: 95 mm
Pdaqf
Shot Weight : 3000 gr
DBTB: 900 x 800 mm
Min Mould Height : 300 mm
Max Mould Height : 850 mm
Mould Opening Stroke : 900 mm
Platen Size : 1220 x 1200 mm
Air Wales : 1
Accumulated : 6
TOTAL PRICE: 22,799 Euros (Ex Works) (Loaded to transport)
DEMAG ERGOTECH Extra 80-430
warehouse no.: 502992
manufacturer: DEMAG
type: Ergotech Extra 80-430
controller: NC4
year of construction: 2005
technical data clamping unit
clamping force: 800 kN
distance between tie bars h:: 400 mm
distance between tie bars v:: 400 mm
size of mould plates h: 540 mm
size of mould plates v: 540 mm
min. mould height: 250 mm
max. open daylight: 700 mm
opening stroke: 450 mm
ejector stroke: 150 mm
ejector force: 41 kN
centering diameter of moving platen: 125 mm
cen...
screw size 40 mm
injection shot weight in Polysterol 182 g/PS
closing pressure 950 kN
mould height - Max./min. 250 - 725 mm
opening stroke 475 mm
tool clamping area 640 x 640 mm
420 x 420 mm
Dimensions (L/W/H) 4,3x1,4x2,0 m mm
total power requirement 27,5 kW
weight of the machine ca. t
dimensions of the machine ca. m
Oipksj88c
CNC Injection Moulding Machine Unilog 4000 Control
with core drawing
with belt convoyer, HB Therm 80°
drying air drier
General Data
Machine weight 2200 Kg
Injection Unit
Screw diameter 30 mm
Shot weight 97 g/ps
Stroke volume 106
Heating capacity 5.8 kW
Clamping Unit
Clamping force 500 kN
Distance between bars (h x v): 270 x 270 mm
Size of mold platens (h x v): 405 x 405 mm
Media
Main electronic connection 400 V 3 - 50 Hz
Pump drive power 1 x 15.00 kW
Eg7vqr9jw
Power consumption 20.8 kW
Additional Equipment
Temperature devices (additional cost)
Parts conveyor (additional cost)
This Arburg ALLROUNDER 270 C 50...
1,0 St. gebr. Spritzgießmaschine
Hersteller: ENGEL
Typ: ES200/45HL-V
Baujahr: 2000
Schließkraft: 45 Tonnen
Schneckendurchmesser: 30 mm
Max. Hubvolumen: 87,3 g/PS
Steuerung: EC100
Iflk0gtqw
Schnittstelle Roboter
used injection molding machine for
injection in cutting line
Manufacturer: Arburg
Type: 270 S 250-60 (w. horiz./vertical setup)
year of construction: 2000
operating hours: approx. 36.000 h
Machine-No. will be communicated in case of further interest
Control system: Selogica
clamping unit:
Hdofezaxo
Clamping force: 250 kN/ 25 tons
clamping platens (h x v): 400 x 400 mm
tie bar distance (h x v): 270 x 270 mm
Installation height min. 200 mm
opening stroke: 275 mm
max. platen distance: 475 mm
...
screw size:15 mm
injection shot weight in Polysterol:15 g/PS
closing pressure:600 kN
daylight:370 x 370 mm
opening stroke:450 mm
mould height - Max./min.:200 mm
Bi7vjrpk
control:Selogica
daylight between platens - max.:650 mm
weight of the machine ca.:3 t
ONLY 2.144 automatic hours
ONLY 4.667 Pump hours
U version II
- wear resistant plastification unit
- with Selogica control with touch screen
- technology stage 2 - wiith 2 regulating pumps
- electrical connection for pneumatic needle valve...
ARBURG Allrounder 370C 800-250 SELOGICA
warehouse no.: 502896
manufacturer: ARBURG
type: Allrounder 370C 800-250
controller: SERLOGICA
year of construction: 2001
operation hours: 62244 h
technical data clamping unit
clamping type: 800 kN
Pfvjt
distance between tie bars h:: 370 mm
distance between tie bars v:: 370 mm
size of mould plates h: 570 mm
size of mould plates v: 570 mm
min. mould height: 250 mm
max. open daylight: 750 mm
opening stroke: 500 mm
screw diameter: 30 mm
swept volume: 106 ...
Injection molding machine, injection molding machine, plastic injection molding machine, plastic injection molding machine, plastic injection molding press
-Closing force: 50 to
-Unilog control: 4000
-Spar distance: 480/580 mm
-Core pull
-Data collection terminal
Cxsvh8xm
-Handling system: Fabr. Battenfeld
-Weight: 2.5 to
General Data
Measurements width 3300 mm
Measurements depth 1200 mm
Measurements height 1500 mm
Machine weight 1800 Kg
Control Unit
Brand ARBURG
Model MULTRONICA
Injection Unit
Screw diameter 25 mm
Shot weight 35,7 G/PS
Stroke volume 39
Heating capacity 4.6 kW
Clamping Unit
Clamping force 350 kN
Media
Main electronic connection 400 V 3 - 50 Hz
Bbpiipzk
Pump drive power 1 X 11.00 kW
Power consumption 15.6 kW
Additional Equipment
Temperature devices (additional cost)
This Arburg ALLROUNDER 27...
1,0 St. gebr Spritzgießmaschine mit Angußpicker
Hersteller: Ferromatik - Milacron
Typ: EE50
Ia8zuxtre
Baujahr: 2002
Schließkraft: 50 Tonnen
Holmabstand: 320 x 320 mm
Schnecken DN: 25 mm
Spritzteilgewicht: 53 g / PS
Steuerung: IQT 44
-Angußpicker Hersteller GHS
KRAUSS MAFFEI KM (S&P 3622)
KRAUSS MAFFEI KM 80-180 EX (clean room, as new !)
force tons: 80
shot ccm: 59 + 74 + 85 ccm
year: 2009
price: 28.700€
contact: Herr Ralf Schulz
Bvyfoqunn3
screw size 60 mm
injection shot weight in Polysterol 380 g/PS
closing pressure 1600 kN
mould height - Max./min. 300-850 mm
tool clamping area 700x700 mm
450x450 mm
total power requirement 45 kW
weight of the machine ca. 5,7 t
dimensions of the machine ca. 5,5x1,3x2,9 m
Bfqbyse2o8
Serial No: 300137
warehouse no.: 502888
manufacturer: ENGEL
type: INSERT 330H-70 S
controller: CC200 A01
year of construction: 2008
clamping type: 700 kN
size of mould plates h: 590 mm
size of mould plates v: 320 mm
min. mould height: 370 mm
max. open daylight: 670 mm
opening stroke: 300 mm
screw diameter: 40 mm
swept volume: 201 ccm
injection pressure: 1221 bar
Ytu37k
equipment included:
screen text english
screen text french
core pulling hydraulically 2x
air valve fixed WAP
machine incl....
Krauss Maffei
KM 80-390 C2 with original Krauss Maffei robot
Control: MC4
year of construction: 2004
Hours: approx. 59.000 h
Clamping unit (-390)
clamping force: 800 KN
tie bar distance: 405mm x 405mm
platen size: 610 x 610 mm
mould installation height: 250 mm
max. platen distance: 750 mm
Injection unit
max. Injection weight (PS) : 142 g
I3gb7kz
Max. Injection volume : 156 ccm
Screw diameter : 35 mm
Spray pressure : 2429 bar
Extras:
Core pull 1-fold
Pneumatic valve on BAP with blowing function
...
General Data
Measurements width 3500 mm
Measurements depth 1500 mm
Ox7fh
Measurements height 2000 mm
Machine weight 1980 kg
Injection Unit
Screw diameter 20 mm
Shot weight 28,4 g/ps
Stroke volume 31
Clamping Unit
Clamping force 300 kN
Distance between bars 270 x 270 mm
Additional Equipment
Temperature devices (additional cost)
Parts conveyor (additional cost)
This Arburg ALLROUNDER 270 C 300-100 injection moulding machine was manufactured in Germany in the year 1998. It has 83679 production...
ARBURG 320M 750-90
Year of manufacture: 1996
Bvzeujvbgq
injection unit:
Screw diameter: 25 mm
injection weight: 26 g
Injection pressure: 2500 bar
Dosing volume: 31 ccm
clamping unit :
clamping force: 75 t
tie bar distance: 320x320 mm
size of clamping platens: 490x490 mm
ejector: hydraulic
clamping unit: hydraulic
control system:
MULTRONICA
Additional equipment:
Air valve x1
It is possible to place the injection unit vertically
It is possible to change the screw diameter for fi 20, 30, 35 mm
Dime...
Medical production version
- Screw diameter: 55 mm
- Shot weight max: 469 g
- Injection rate: 255 cm³/s
- Injection pressure: 1.615 / 2.050 bar
- Injection volume: 510 cm³
- Screw speed: 230 rpm
- Screw L/D ratio: 20
- Nozzle stroke / force max.: 350 / 67 mm / kN
- Ejector stroke / force max.: 200 / 90 mm / kN
- Clamping force: 3.000 kN
- Mould opening stroke max: 900 mm
- Mould height max: n/a mm
- Mould height min: 400 mm
- Daylight between platens max: 1.300 mm
- Heating zones: 2 * 16.3/5
-...
screw size 50 mm
injection shot weight in Polysterol 200 g/PS
closing pressure 950 kN
mould height - Max./min. 250-700 mm
tool clamping area 590x590 mm
380x380 mm
Bfqby2wbc9
total power requirement 33,2 kW
weight of the machine ca. 4 t
dimensions of the machine ca. 4,3x1,4 m
Serial No: 330077
warehouse no.: 502963
manufacturer: BOY
type: BOY 90 A
controller: Procan CT
year of construction: 2007
operation hours: 38000 h
technical data clamping unit
clamping force: 900 kN
distance between tie bars h:: 430 mm
distance between tie bars v:: 360 mm
size of mould plates h: 635 mm
size of mould plates v: 610 mm
min. mould height: 250 mm
max. open daylight: 725 mm
opening stroke: 475 mm
ejector stroke: 130 mm
ejector force: 43 kN
centering diameter of moving platen: 125 mm
centering diamete...
Technical parameters :
- control: UNILOG 4000
- clamping force: 75 tons
- opening force: 53 kN
- external panel size: 640 x 640 mm
- spacing between columns: 404 x 404 mm
- column diameter: 65 mm
- min. mold height: 250 mm
- column spacing: 400 mm x 304 mm
- plate size: 640 mm x 540 mm
- mold opening stroke: 375 mm
- max. mold opening: 625 mm
- ejector force: 17.5 kN
- ejector stroke: 160 mm
- dry cycle: 32 1 / min.
- screw: 35 mm
- screw stroke: 140 mm
- screw speed: 0-275 min.
- nozzle pressur...
General Data
Measurements width 3500 mm
Measurements depth 1500 mm
Measurements height 2000 mm
Machine weight 1980 kg
Injection Unit
Screw diameter 20 mm
Shot weight 28,4 g/ps
Stroke volume 31
Brwdw8ruvn
Clamping Unit
Clamping force 300 kN
Distance between bars 270 x 270 mm
Mould height min 200 mm
Additional Equipment
Temperature devices (additional cost)
Parts conveyor (additional cost)
This Arburg ALLROUNDER 270 C 300-100 injection moulding machine was made in 1998 in Germany. It has 8526...
ARBURG 305 ECO 700-230
Year of manufacture 1984
injection unit:
Screw diameter: 40mm
injection weight: 158 g
Injection pressure: 1250 bar
Dosing volume: 188 ccm
clamping unit :
clamping force: 70 t
Easmmekn
tie bar distance: 305x135 mm
size of clamping platens: 432x310 mm
ejector: hydraulic
clamping unit: toggle lever
control system:
DIALOGICA
Additional equipment:*
Dimensions:
Weight: 1870 kg
Length/width: 3.41x1.70
Drive:
Pump/motor: 11 kW
Heating power: 7 kW
Cylinder heating: 18 kW
Price: On ...
1,0 St. gebr Spritzgießmaschine
Hersteller: Krauss Maffei
Typ: KM40-125 C
Baujahr: 2004
Schließkraft: 45 Tonnen
Uobf8qs
Holmabstand: 405 x 405 mm
Schnecken DN: 25 mm
Spritzteilgewicht: 68 g / PS
Steuerung: MC4
Ausstattung:
1 x Kernzug
1 x Roboter GEIGER HANDLING
Förderband
Used machine in good condition. Available for immediate delivery.
- Screw diameter: 75 mm
- Shot weight max: 1.640 g
- Injection volume: 1.725 cm³
- Clamping force: 3.800 kN
- Daylight between platens max: 700 mm
- Platen size (h x v): 1.025 x 945 mm
- Dimensions (long x wide x high): 8.400 x 2.000 x 2.700 mm
Ogluthu
- Weight: 19.000 kg
warehouse no.: 502268
manufacturer: DEMAG
type: ergotech system 600-120 NC 4
year of construction: 2003
clamping force: 600 kN
Ytumws
distance between tie bars h x v: 420 x 420 mm
size of mould plates h x v: 590 x 600 mm
min. mould height: 350 mm
max. open daylight: 800 mm
opening stroke: 450 mm
screw diameter: 22 mm
swept volume: 42 ccm
injection pressure: 2510 bar
equipment included:
Ejector parallel to the mould movement
screen text german
CEE-socket 16A
core pulling hydra...
Technical data :
- CNC control: UNILOG 4000 B
- maximum clamping force: 50 tons, 500 kN
- opening force: 40 kN
- meter reading: 9852,8 h
- maximum injection volume: 99 cm3
- maximum injection pressure: 2022 bar
- maximum processing temperature: 450 degrees C
- auger: 30 mm
- plasticizing capacity: 10.5 g / sec.
- screw stroke: 140 mm
- screw speed: 0-290 min.
- nozzle stroke: 200 mm
- heating power of heaters: 7.88 kW
- external panel size: 480 x 480 mm
- spacing between columns: 304 x 304 mm
- ...
General Data
Measurements width 3200 mm
Measurements depth 1300 mm
Measurements height 1800 mm
Machine weight 2500 Kg.
Injection Unit
Screw diameter 20 mm
Shot weight 25,9 g/ps
Stroke volume 28,3
Sqf9azfb
Clamping Unit
Clamping force 400 kN
Additional Equipment
GHS Automation, SP 1.5 (additional cost)
Temperature devices (additional cost)
Parts conveyor (additional cost)
This Krauss Maffei 40-55 C2 Injection Moulding Machine was manufactured in 2005. It has 60591 production hours. This machi...
ARBURG 370C 600-100
Yw0ok
Year of manufacture: 1995
injection unit:
Screw diameter: 30 mm
injection weight: 59 g
Injection pressure: 1550 bar
Dosing volume: 70 ccm
clamping unit :
clamping force: 60t
tie bar distance : 370x370 mm
size of clamping platens: 570x570 mm
ejector: hydraulic
clamping unit: hydraulic
Control system: DIALOGICA
Additional equipment:
Air valve x1
Hydraulic core pull x2
Dimensions:
Weight: 3600 kg
Length/width/height: 4.30x1.59x2.08 m
Drive:
Pump/motor: 11 kW
Heating power:...
screw size 22 mm
moulding weight 33,4 g
closing pressure 200 kN
tie bars distance 254x254 mm
Bd32cnqg3
opening stroke 300 mm
dayligth 125 mm
Dimensions (L/W/H) 2,6x1,1x1,7 mm
total power requirement 9 kW
weight of the machine ca. 2 t
Used machine in good condition. Available for immediate delivery.
- Screw diameter: 60 mm
- Shot weight max: 650 g
- Injection volume: 769 cm³
- Screw L/D ratio: 23
- Ejector stroke / force max.: 250 / mm / kN
- Clamping force: 3.500 kN
- Mould opening stroke max: 1.300 mm
- Mould height max: 920 mm
- Mould height min: 380 mm
- Daylight between platens max: 1.300 mm
Buibyxa2xs
- Platen size (h x v): 1.060 x 1.095 mm
- Distance between tie-bars (h x v): 710 x 710 mm
- Control: MC 4
- Core pulls...
Control system: MC4 1.4
Clamping force: 65 t
Injection weight: 76 g
Height of the plate for mounting the mold: 609 mm
Width of the plate for mounting the mold: 609 mm
Distance between the columns (horizontal): 403 mm
Nvoj9
Distance between the columns (vertical): 403 mm
Screw diameter: 30 mm
Machine length: 3807 mm
Machine width: 1389 mm
Machine height: 1889 mm
Weight of the injection molding machine: 3244 kg
Injection ENGEL ES 200/40 HLS built in 1995 in Austria.
Technical parameters :
- CNC control: EC 88
Injection elements:
- screw diameter: 30 mm
- injection weight: 89 g
- injection pressure: 1380 bar
- injection volume: 99 ccm
Closure components:
- closing force: 40 t
- dimensions of table plates: 550 x 330 mm
- ejector: hydraulic
- closing system: hydraulic (tie-bar-less)
Dimensions of the ENGEL ES 200/40 HLS injection molding machine:
- weight: approx. 3,200 kg
- dimensions of the machine ...
General Data
Machine weight 3900 Kg
Injection Unit
Screw diameter 15 mm
Shot weight 54 g/ps
Stroke volume 59
Clamping Unit
Clamping force 800 kN
Brwdx2ffrq
Distance between bars (h x v): 370 x 370 mm
Size of mold platens (h x v): 590 x 590 mm
Media
Main electronic connection 24 DC V 50 Hz
This Battenfeld BA 800/125 CDC Injection Moulding Machine was built in the year 1998. This machine can work with a clamping force of 800 kN. It has a record of 53278 production hours. This machine works wit...
ARBURG 370M 600-200
Year of manufacture 1993
injection unit:
Screw diameter: 35mm
injection weight: 121 g
Injection pressure: 1500 bar
Dosing volume: 144 ccm
clamping unit :
clamping force: 60t
tie bar distance: 370x370 mm
size of clamping platens: 545x545mm
ejector: hydraulic
clamping unit: hydraulic
control system:
MULTRONICA
Additional equipment:
*
Dimensions:
Weight: 3080 kg
Length/width/height: 4.30x1.85x1.60 m
Drive:
Pump/motor: 11 kW
Ij8mtmvwe
Heating power: 5,5 kW
Total power: 16,5 kW
Pr...
screw size 25 mm
moulding weight 41,8 g
closing pressure 350 kN
tie bars distance 304 x 304 mm
opening stroke 325 mm
dayligth 150 mm
injection pressure 2149 bar
Oiphs8gvy
total power requirement 14,5 kW
weight of the machine ca. 2,2 t
Control: Unilog 4000 B
Machine has one pit draw.
belt convoyer
HB-Therm 80°
Serial Nr. A35/04/11/0/05
1x used DEMAG Ergotech 800-430 EXTRA
year of construction: 2003
Ma-No. 7856-0093
control: NC4
screw: 40mm
incl. magnetic clamping plates
incl. sprue picker
Mwdsk8
The machine is fully functional and immediately available!
Used machine in good condition. Available for immediate delivery.
- Screw diameter: n/a mm
- Shot weight max: n/a g
- Injection rate: n/a cm³/s
- Injection pressure: n/a bar
- Injection volume: n/a cm³
- Screw speed: 107 rpm
- Screw L/D ratio: n/a
- Nozzle stroke / force max.: 425 mm / kN
- Ejector stroke / force max.: 265 / 182 mm / kN
- Clamping force: 6.500 kN
- Mould height max: 910 mm
- Mould height min: 350 mm
- Daylight between platens max: 1.830 mm
- Platen size (h x v): 1.310 x 1.310 m...
Injection ENGEL ES 330/80 HL ST built in 1997 in Austria.
Technical parameters :
- CNC control: EC88
Injection elements:
- screw diameter: 35 mm
- injection weight: 140 g
- injection pressure: 1600 bar
- injection volume: 154 ccm
Closure components:
- closing force: 80 t
- table top dimensions, max .: 730 x 600 mm
- ejector: hydraulic
- closing system: hydraulic (tie-bar-less)
Dimensions:
Encx0dz
- weight: approx. 6000 kg
- dimensions of the machine (length x width x height): 3.91 x 1.38 x 2...
